Add UART suuport for s5l8700 and s5l8701

Add UART support for s5l8700/1 using the UC870X UART controller,
actually the functionallity is disabled and must be enabled for
each individual target. Tested on iPod Nano 2G (s5l8701), not
tested on s5l8700.

Change-Id: Ic0f216bb871502d355a70e4b658e536a2c0976a9

4 files changed, 344 insertions, 12 deletions

diff --git a/firmware/target/arm/s5l8700/system-s5l8700.c b/firmware/target/arm/s5l8700/system-s5l8700.c
index 601955fbac..728fea0432 100644
--- a/firmware/target/arm/s5l8700/system-s5l8700.c
+++ b/firmware/target/arm/s5l8700/system-s5l8700.c
@@ -27,6 +27,7 @@
 #include "storage.h"
 #include "pmu-target.h"
 #endif
+#include "uart-target.h"
 
 /* MIUSDPARA_BOOST taken from OF (see crt0.S). MIUSDPARA_UNBOOST is derived
  * from MIUSDPARA_BOOST due to the fact that the minimum allowed DRAM timings 
@@ -63,7 +64,7 @@ default_interrupt(INT_DMA);
 default_interrupt(INT_ALARM_RTC);
 default_interrupt(INT_PRI_RTC);
 default_interrupt(RESERVED1);
-default_interrupt(INT_UART);
+default_interrupt(INT_UART1);
 default_interrupt(INT_USB_HOST);
 default_interrupt(INT_USB_FUNC);
 default_interrupt(INT_LCDC_0);
@@ -81,9 +82,10 @@ default_interrupt(RESERVED2);
 default_interrupt(INT_MSTICK);
 default_interrupt(INT_ADC_WAKEUP);
 default_interrupt(INT_ADC);
-default_interrupt(INT_UNK1);
-default_interrupt(INT_UNK2);
-default_interrupt(INT_UNK3);
+#if CONFIG_CPU==S5L8701
+default_interrupt(INT_UNK);
+default_interrupt(INT_UART2);
+#endif
 
 
 void INT_TIMER(void)
@@ -98,16 +100,16 @@ void INT_TIMER(void)
 #if CONFIG_CPU==S5L8701
 static void (* const irqvector[])(void) =
 { /* still 90% unverified and probably incorrect */
-    EXT0,EXT1,EXT2,EINT_VBUS,EINTG,INT_TIMER,INT_WDT,INT_UNK1,
-    INT_UNK2,INT_UNK3,INT_DMA,INT_ALARM_RTC,INT_PRI_RTC,RESERVED1,INT_UART,INT_USB_HOST,
-    INT_USB_FUNC,INT_LCDC_0,INT_LCDC_1,INT_CALM,INT_ATA,INT_UART0,INT_SPDIF_OUT,INT_ECC,
+    EXT0,EXT1,EXT2,EINT_VBUS,EINTG,INT_TIMER,INT_WDT,INT_UART2,
+    INT_UNK,INT_UNK,INT_DMA,INT_ALARM_RTC,INT_UART1,INT_UNK,INT_UNK,INT_USB_HOST,
+    INT_USB_FUNC,INT_LCDC_0,INT_LCDC_1,INT_CALM,INT_ATA,INT_UNK,INT_SPDIF_OUT,INT_ECC,
     INT_SDCI,INT_LCD,INT_WHEEL,INT_IIC,RESERVED2,INT_MSTICK,INT_ADC_WAKEUP,INT_ADC
 };
 #else
 static void (* const irqvector[])(void) =
 {
     EXT0,EXT1,EXT2,EINT_VBUS,EINTG,INT_TIMERA,INT_WDT,INT_TIMERB,
-    INT_TIMERC,INT_TIMERD,INT_DMA,INT_ALARM_RTC,INT_PRI_RTC,RESERVED1,INT_UART,INT_USB_HOST,
+    INT_TIMERC,INT_TIMERD,INT_DMA,INT_ALARM_RTC,INT_PRI_RTC,RESERVED1,INT_UART1,INT_USB_HOST,
     INT_USB_FUNC,INT_LCDC_0,INT_LCDC_1,INT_ECC,INT_CALM,INT_ATA,INT_UART0,INT_SPDIF_OUT,
     INT_SDCI,INT_LCD,INT_WHEEL,INT_IIC,RESERVED2,INT_MSTICK,INT_ADC_WAKEUP,INT_ADC
 };
@@ -116,16 +118,16 @@ static void (* const irqvector[])(void) =
 #if CONFIG_CPU==S5L8701
 static const char * const irqname[] =
 { /* still 90% unverified and probably incorrect */
-    "EXT0","EXT1","EXT2","EINT_VBUS","EINTG","INT_TIMER","INT_WDT","INT_UNK1",
-    "INT_UNK2","INT_UNK3","INT_DMA","INT_ALARM_RTC","INT_PRI_RTC","Reserved","INT_UART","INT_USB_HOST",
-    "INT_USB_FUNC","INT_LCDC_0","INT_LCDC_1","INT_CALM","INT_ATA","INT_UART0","INT_SPDIF_OUT","INT_ECC",
+    "EXT0","EXT1","EXT2","EINT_VBUS","EINTG","INT_TIMER","INT_WDT","INT_UART2",
+    "INT_UNK1","INT_UNK2","INT_DMA","INT_ALARM_RTC","INT_UART1","INT_UNK3","INT_UNK4","INT_USB_HOST",
+    "INT_USB_FUNC","INT_LCDC_0","INT_LCDC_1","INT_CALM","INT_ATA","INT_UNK5","INT_SPDIF_OUT","INT_ECC",
     "INT_SDCI","INT_LCD","INT_WHEEL","INT_IIC","Reserved","INT_MSTICK","INT_ADC_WAKEUP","INT_ADC"
 };
 #else
 static const char * const irqname[] =
 {
     "EXT0","EXT1","EXT2","EINT_VBUS","EINTG","INT_TIMERA","INT_WDT","INT_TIMERB",
-    "INT_TIMERC","INT_TIMERD","INT_DMA","INT_ALARM_RTC","INT_PRI_RTC","Reserved","INT_UART","INT_USB_HOST",
+    "INT_TIMERC","INT_TIMERD","INT_DMA","INT_ALARM_RTC","INT_PRI_RTC","Reserved","INT_UART1","INT_USB_HOST",
     "INT_USB_FUNC","INT_LCDC_0","INT_LCDC_1","INT_ECC","INT_CALM","INT_ATA","INT_UART0","INT_SPDIF_OUT",
     "INT_SDCI","INT_LCD","INT_WHEEL","INT_IIC","Reserved","INT_MSTICK","INT_ADC_WAKEUP","INT_ADC"
 };
@@ -172,6 +174,9 @@ void system_init(void)
 #ifdef IPOD_NANO2G
     pmu_init();
 #endif
+#ifdef HAVE_SERIAL
+    uart_init();
+#endif
 }
 
 void system_reboot(void)
diff --git a/firmware/target/arm/s5l8700/uart-s5l8700.c b/firmware/target/arm/s5l8700/uart-s5l8700.c
new file mode 100644
index 0000000000..80207e94df
--- /dev/null
+++ b/firmware/target/arm/s5l8700/uart-s5l8700.c
@@ -0,0 +1,129 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2014 by Cástor Muñoz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "config.h"
+#include "system.h"
+
+#include "s5l8700.h"
+#include "uc870x.h"
+
+
+/*
+ * XXX: This code is based on datasheets and NEVER TESTED !!!
+ */
+
+
+/*
+ * s5l8700 UC870X HW: 1 UARTC, 2 ports
+ */
+static struct uartc_port *uartc_port_l[UARTC_N_PORTS];
+const struct uartc s5l8700_uartc =
+{
+    .id       = 0,
+    .baddr    = UARTC_BASE_ADDR,
+    .port_off = UARTC_PORT_OFFSET,
+    .n_ports  = UARTC_N_PORTS,
+    .port_l   = uartc_port_l,
+};
+
+static int intmsk_uart[S5L8700_N_PORTS] = { INTMSK_UART0, INTMSK_UART1 };
+
+/*
+ * Device level functions specific to S5L8700
+ */
+void uart_target_enable_gpio(int uart_id, int port_id)
+{
+    (void) uart_id;
+    switch (port_id) {
+        /* configure UARTx Tx/Rx GPIO ports */
+        case 0:
+            PCON0 = (PCON0 & 0x0fff) | 0xa000;
+            break;
+        case 1:
+            PCON6 = (PCON6 & 0xfff00fff) | 0x00044000;
+            break;
+    }
+}
+
+void uart_target_disable_gpio(int uart_id, int port_id)
+{
+    (void) uart_id;
+    switch (port_id) {
+        /* configure default reset values */
+        case 0:
+            PCON0 = (PCON0 & 0x0fff) | 0x0000;
+            break;
+        case 1:
+            PCON6 = (PCON6 & 0xfff00fff) | 0x00000000;
+            break;
+    }
+}
+
+void uart_target_enable_irq(int uart_id, int port_id)
+{
+    (void) uart_id;
+    INTMSK |= intmsk_uart[port_id];
+}
+
+void uart_target_disable_irq(int uart_id, int port_id)
+{
+    (void) uart_id;
+    INTMSK &= ~intmsk_uart[port_id];
+}
+
+void uart_target_clear_irq(int uart_id, int port_id)
+{
+    (void) uart_id;
+    SRCPND |= intmsk_uart[port_id];
+}
+
+void uart_target_enable_clocks(int uart_id)
+{
+    (void) uart_id;
+    PWRCON &= ~(1 << CLOCKGATE_UARTC);
+}
+
+void uart_target_disable_clocks(int uart_id)
+{
+    (void) uart_id;
+    PWRCON |= (1 << CLOCKGATE_UARTC);
+}
+
+/*
+ * ISRs
+ */
+void ICODE_ATTR INT_UART0(void)
+{
+    uartc_callback(&s5l8700_uartc, 0);
+}
+
+void ICODE_ATTR INT_UART1(void)
+{
+    uartc_callback(&s5l8700_uartc, 1);
+}
+
+/* Main init */
+void uart_init(void)
+{
+    uartc_open(&s5l8700_uartc);
+}
diff --git a/firmware/target/arm/s5l8700/uart-s5l8701.c b/firmware/target/arm/s5l8700/uart-s5l8701.c
new file mode 100644
index 0000000000..00c9322e47
--- /dev/null
+++ b/firmware/target/arm/s5l8700/uart-s5l8701.c
@@ -0,0 +1,160 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2014 by Cástor Muñoz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "config.h"
+#include "system.h"
+
+#include "s5l8700.h"
+#include "uc870x.h"
+
+
+/*
+ * s5l8701 UC870X HW: 3 UARTC, 1 port per UARTC
+ */
+static struct uartc_port *uartc0_port_l[UARTC0_N_PORTS];
+const struct uartc s5l8701_uartc0 =
+{
+    .id       = 0,
+    .baddr    = UARTC0_BASE_ADDR,
+    .port_off = UARTC0_PORT_OFFSET,
+    .n_ports  = UARTC0_N_PORTS,
+    .port_l   = uartc0_port_l,
+};
+
+/* UARTC1,2 not used on Nano2G */
+#ifndef IPOD_NANO2G
+static struct uartc_port *uartc1_port_l[UARTC1_N_PORTS];
+const struct uartc s5l8701_uartc1 =
+{
+    .id       = 1,
+    .baddr    = UARTC1_BASE_ADDR,
+    .port_off = UARTC1_PORT_OFFSET,
+    .n_ports  = UARTC1_N_PORTS,
+    .port_l   = uartc1_port_l,
+};
+
+static struct uartc_port *uartc2_port_l[UARTC2_N_PORTS];
+const struct uartc s5l8701_uartc2 =
+{
+    .id       = 2,
+    .baddr    = UARTC2_BASE_ADDR,
+    .port_off = UARTC2_PORT_OFFSET,
+    .n_ports  = UARTC2_N_PORTS,
+    .port_l   = uartc2_port_l,
+};
+#endif
+
+static uint8_t clockgate_uartc[S5L8701_N_UARTC] = {
+    CLOCKGATE_UARTC0, CLOCKGATE_UARTC1, CLOCKGATE_UARTC2 };
+
+static int intmsk_uart[S5L8701_N_UARTC] = {
+    INTMSK_UART0, INTMSK_UART1, INTMSK_UART2 };
+
+/*
+ * Device level functions specific to S5L8701
+ */
+void uart_target_enable_gpio(int uart_id, int port_id)
+{
+    (void) port_id;
+    switch (uart_id) {
+        /* configure UARTx Tx/Rx GPIO ports */
+        case 0:
+            PCON1 = (PCON1 & 0xffffff00) | 0x00000044;
+            break;
+        case 1:
+        case 2:
+            /* unknown */
+        default:
+            break;
+    }
+}
+
+void uart_target_disable_gpio(int uart_id, int port_id)
+{
+    (void) port_id;
+    switch (uart_id) {
+        /* configure minimal power consumption */
+        case 0:
+            PCON1 = (PCON1 & 0xffffff00) | 0x00000011;
+            break;
+        case 1:
+        case 2:
+        default:
+            break;
+    }
+}
+
+void uart_target_enable_irq(int uart_id, int port_id)
+{
+    (void) port_id;
+    INTMSK |= intmsk_uart[uart_id];
+}
+
+void uart_target_disable_irq(int uart_id, int port_id)
+{
+    (void) port_id;
+    INTMSK &= ~intmsk_uart[uart_id];
+}
+
+void uart_target_clear_irq(int uart_id, int port_id)
+{
+    (void) port_id;
+    SRCPND |= intmsk_uart[uart_id];
+}
+
+void uart_target_enable_clocks(int uart_id)
+{
+    PWRCON &= ~(1 << clockgate_uartc[uart_id]);
+}
+
+void uart_target_disable_clocks(int uart_id)
+{
+    PWRCON |= (1 << clockgate_uartc[uart_id]);
+}
+
+/*
+ * ISRs
+ */
+void ICODE_ATTR INT_UART0(void)
+{
+    uartc_callback(&s5l8701_uartc0, 0);
+}
+
+/* UARTC1,2 not used on Nano2G */
+#ifndef IPOD_NANO2G
+void ICODE_ATTR INT_UART1(void)
+{
+    uartc_callback(&s5l8701_uartc1, 0);
+}
+
+void ICODE_ATTR INT_UART2(void)
+{
+    uartc_callback(&s5l8701_uartc2, 0);
+}
+#endif
+
+/* Main init */
+void uart_init(void)
+{
+    uartc_open(&s5l8701_uartc0);
+}
diff --git a/firmware/target/arm/s5l8700/uart-target.h b/firmware/target/arm/s5l8700/uart-target.h
new file mode 100644
index 0000000000..d6d45b9073
--- /dev/null
+++ b/firmware/target/arm/s5l8700/uart-target.h
@@ -0,0 +1,38 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2014 by Cástor Muñoz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef __UART_TARGET_H__
+#define __UART_TARGET_H__
+
+/* Define this to show debug data on "View HW Info" */
+/* #define UC870X_DEBUG */
+
+void uart_init(void);
+
+/* s5l870x low level routines */
+void uart_target_enable_clocks(int uart_id);
+void uart_target_disable_clocks(int uart_id);
+void uart_target_enable_irq(int uart_id, int port_id);
+void uart_target_disable_irq(int uart_id, int port_id);
+void uart_target_clear_irq(int uart_id, int port_id);
+void uart_target_enable_gpio(int uart_id, int port_id);
+void uart_target_disable_gpio(int uart_id, int port_id);
+
+#endif /* __UART_TARGET_H__ */