move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13200 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 89 insertions, 0 deletions

diff --git a/firmware/target/arm/s3c2440/gigabeat-fx/button-target.h b/firmware/target/arm/s3c2440/gigabeat-fx/button-target.h
new file mode 100644
index 0000000000..ab68e8050f
--- /dev/null
+++ b/firmware/target/arm/s3c2440/gigabeat-fx/button-target.h
@@ -0,0 +1,89 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2006 by Linus Nielsen Feltzing
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef _BUTTON_TARGET_H_
+#define _BUTTON_TARGET_H_
+
+#include <stdbool.h>
+#include "config.h"
+
+#define HAS_BUTTON_HOLD
+
+bool button_hold(void);
+void button_init_device(void);
+int button_read_device(void);
+
+/* Toshiba Gigabeat specific button codes */
+
+#define BUTTON_POWER        0x00000001
+#define BUTTON_MENU         0x00000002
+
+#define BUTTON_LEFT         0x00000004
+#define BUTTON_RIGHT        0x00000008
+#define BUTTON_UP           0x00000010
+#define BUTTON_DOWN         0x00000020
+
+#define BUTTON_VOL_UP       0x00000040
+#define BUTTON_VOL_DOWN     0x00000080
+
+#define BUTTON_SELECT       0x00000100
+#define BUTTON_A            0x00000200
+
+
+/* Toshiba Gigabeat specific remote button ADC values */
+/* The remote control uses ADC 1 to emulate button pushes
+    Reading (approx)     Button      HP plugged in?      Remote plugged in?
+         0                 N/A            Yes                  No
+        125             Play/Pause      Cant tell             Yes
+        241             Speaker+        Cant tell             Yes
+        369             Rewind          Cant tell             Yes
+        492             Fast Fwd        Cant tell             Yes
+        616             Vol +           Cant tell             Yes
+        742             Vol -           Cant tell             Yes
+        864             None            Cant tell             Yes
+       1023              N/A               No                  No
+*/
+
+/* 
+    Notes:
+
+    Buttons on the remote are translated into equivalent button presses just
+    as if you were pressing them on the Gigabeat itself.
+    
+    We cannot tell if the hold is asserted on the remote. The Hold function on 
+    the remote is to block the output of the buttons changing.
+
+    Only one button can be sensed at a time. If another is pressed, the button
+    with the lowest reading is dominant. So, if Rewind and Vol + are pressed
+    at the same time, Rewind value is the one that is read.
+*/
+    
+
+
+
+#define BUTTON_MAIN (BUTTON_POWER|BUTTON_MENU|BUTTON_LEFT|BUTTON_RIGHT\
+                |BUTTON_UP|BUTTON_DOWN|BUTTON_VOL_UP|BUTTON_VOL_DOWN\
+                |BUTTON_SELECT|BUTTON_A)
+
+
+#define BUTTON_REMOTE 0
+
+#define POWEROFF_BUTTON BUTTON_POWER
+#define POWEROFF_COUNT 10
+
+#endif /* _BUTTON_TARGET_H_ */