lcd-ssd1303 (all Clips) : move model specific code in their own files

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25248 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 85 insertions, 0 deletions

diff --git a/firmware/target/arm/as3525/sansa-clipv2/lcd-clipv2.c b/firmware/target/arm/as3525/sansa-clipv2/lcd-clipv2.c
new file mode 100644
index 0000000000..e405036b63
--- /dev/null
+++ b/firmware/target/arm/as3525/sansa-clipv2/lcd-clipv2.c
@@ -0,0 +1,85 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 François Dinel
+ * Copyright (C) 2008-2009 Rafaël Carré
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "config.h"
+
+#include "lcd.h"
+#include "system.h"
+#include "cpu.h"
+
+void lcd_hw_init(void)
+{
+/* DBOP initialisation, do what OF does */
+    CCU_IO |= (1<<12); /* ?? */
+    CGU_DBOP |= /*(1<<3)*/ 0x18 | AS3525_DBOP_DIV;
+
+    DBOP_CTRL      = 0x51004;
+    DBOP_TIMPOL_01 = 0x36A12F;
+    DBOP_TIMPOL_23 = 0xE037E037;
+
+    GPIOB_DIR |= (1<<2)|(1<<5);
+    GPIOB_PIN(5) = (1<<5);
+}
+
+#define LCD_DELAY 10
+
+void lcd_write_command(int byte)
+{
+    volatile int i = 0;
+    while(i<LCD_DELAY) i++;
+
+    /* unset D/C# (data or command) */
+    GPIOB_PIN(2) = 0;
+    DBOP_TIMPOL_23 = 0xE0370036;
+
+    /* Write command */
+    /* Only bits 15:12 and 3:0 of DBOP_DOUT are meaningful */
+    DBOP_DOUT = (byte << 8) | byte;
+
+    /* While push fifo is not empty */
+    while ((DBOP_STAT & (1<<10)) == 0)
+        ;
+
+    DBOP_TIMPOL_23 = 0xE037E037;
+}
+
+void lcd_write_data(const fb_data* p_bytes, int count)
+{
+    volatile int i = 0;
+    while(i<LCD_DELAY) i++;
+
+    /* set D/C# (data or command) */
+    GPIOB_PIN(2) = (1<<2);
+
+    while (count--)
+    {
+        /* Write pixels */
+        /* Only bits 15:12 and 3:0 of DBOP_DOUT are meaningful */
+        DBOP_DOUT = (*p_bytes << 8) | *p_bytes;
+
+        p_bytes++; /* next packed pixels */
+
+        /* Wait if push fifo is full */
+        while ((DBOP_STAT & (1<<6)) != 0);
+    }
+    /* While push fifo is not empty */
+    while ((DBOP_STAT & (1<<10)) == 0);
+}