Sandisk Sansa Connect port (FS #12363)

Included are drivers for buttons, backlight, lcd, audio and storage.



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 201 insertions, 0 deletions

diff --git a/firmware/export/config/sansaconnect.h b/firmware/export/config/sansaconnect.h
new file mode 100644
index 0000000000..714534d6ad
--- /dev/null
+++ b/firmware/export/config/sansaconnect.h
@@ -0,0 +1,201 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ *
+ * Copyright (C) 2011 by Tomasz Moń
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+/*
+ * This config file is for the Sansa Connect
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* This is the absolute address on the bus set by OF bootloader */
+#define CONFIG_SDRAM_START 0x01000000
+
+#define SANSA_CONNECT 1
+#define MODEL_NAME   "Sandisk Sansa Connect"
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 81
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+/* define this if you use an SD controller */
+#define CONFIG_STORAGE STORAGE_SD
+
+#define HAVE_MULTIDRIVE
+#define NUM_DRIVES 2
+#define HAVE_HOTSWAP
+#define HAVE_HOTSWAP_STORAGE_AS_MAIN
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* define this if you want viewport clipping enabled for safe LCD functions */
+#define HAVE_VIEWPORT_CLIP
+
+/* LCD dimensions */
+#define CONFIG_LCD LCD_CONNECT
+
+#define LCD_WIDTH  240
+#define LCD_HEIGHT 320
+
+#define LCD_DEPTH  16   /* 65k colours */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+#define HAVE_LCD_ENABLE
+#ifndef BOOTLOADER
+#define HAVE_LCD_SLEEP
+#endif
+
+#define LCD_SLEEP_TIMEOUT (2*HZ)
+
+#define MAX_ICON_HEIGHT 35
+#define MAX_ICON_WIDTH 35
+
+
+#define CONFIG_KEYPAD SANSA_CONNECT_PAD
+
+/* Define this to have CPU bootsted while scrolling in the UI */
+#define HAVE_GUI_BOOST
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+#define HAVE_MORSE_INPUT
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+//#define HAVE_HARDWARE_BEEP
+
+/* There is no hardware tone control */
+#define HAVE_SW_TONE_CONTROLS
+
+#define HAVE_AIC3X
+
+//#define HW_SAMPR_CAPS SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 | SAMPR_CAP_8
+
+/* define this if you have a real-time clock */
+//#define CONFIG_RTC RTC_STM41T62
+
+/* define this if the unit uses a scrollwheel for navigation */
+#define HAVE_SCROLLWHEEL
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+#define HAVE_BACKLIGHT_BRIGHTNESS
+
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING          1
+#define MAX_BRIGHTNESS_SETTING          20
+#define DEFAULT_BRIGHTNESS_SETTING      16 /* OF default brightness (80%) */
+#define DEFAULT_DIMNESS_SETTING         6  /* OF default inactive (30%) */
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x200000
+
+#define BATTERY_CAPACITY_DEFAULT 800 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 700     /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 1000    /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 100     /* capacity increment */
+#define BATTERY_TYPES_COUNT  1       /* only one type */
+
+/* define current usage levels */
+#if 0
+/* TODO */
+#define CURRENT_NORMAL     85
+#define CURRENT_BACKLIGHT  200
+#endif
+
+/* Hardware controlled charging with monitoring */
+//#define CONFIG_CHARGING CHARGING_MONITOR
+
+#define CONFIG_CPU DM320
+
+#define CONFIG_I2C I2C_DM320
+#define HAVE_SOFTWARE_I2C
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x400000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ 150000000
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+#if 0
+#define HAVE_USBSTACK
+#define USB_VENDOR_ID 0x0781
+#define USB_PRODUCT_ID 0x7480
+#endif
+
+#define INCLUDE_TIMEOUT_API
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define BOOTFILE_EXT "sansa"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+/* Define this if a programmable hotkey is mapped */
+#define HAVE_HOTKEY