Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24112 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 202 insertions, 0 deletions

diff --git a/firmware/export/config/gogearhdd6330.h b/firmware/export/config/gogearhdd6330.h
new file mode 100644
index 0000000000..26da200ce1
--- /dev/null
+++ b/firmware/export/config/gogearhdd6330.h
@@ -0,0 +1,202 @@
+/*
+ * This config file is for the Philips GoGear HDD63x0
+ */
+
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 65
+#define MODEL_NAME   "Philips GoGear HDD63x0"
+
+/* define this if you use an ATA controller */
+#define CONFIG_STORAGE STORAGE_ATA
+
+/* define this if you have recording possibility */
+#define HAVE_RECORDING
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
+
+/* define the bitmask of hardware sample rates */
+#define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
+                         SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
+
+/* define the bitmask of recording sample rates */
+#define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
+                         SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH  220
+#define LCD_HEIGHT 176
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565  /* rgb565 byte-swapped */
+
+#ifndef BOOTLOADER
+/* Define this if your LCD can be enabled/disabled */
+/* #define HAVE_LCD_ENABLE */
+
+/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
+ * should be defined as well.
+ * We can currently put the lcd to sleep but it won't wake up properly */
+/* #define HAVE_LCD_SLEEP */
+/* #define HAVE_LCD_SLEEP_SETTING */
+#endif
+
+/* define this if you can flip your LCD */
+/* #define HAVE_LCD_FLIP */
+
+/* define this if you can invert the colours on your LCD */
+/* #define HAVE_LCD_INVERT */
+
+/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
+
+#define CONFIG_KEYPAD PHILIPS_HDD6330_PAD
+
+/* Define this to enable morse code input */
+#define HAVE_MORSE_INPUT
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock. The HDD16x0 has a PCF8563 RTC,
+   but it's register compatible with the E8564. */
+#ifndef BOOTLOADER
+#define CONFIG_RTC RTC_E8564
+#define HAVE_RTC_ALARM
+#endif
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+/* Define this if you have the WM8731 audio codec */
+#define HAVE_WM8731
+
+/* WM8731 has no tone controls, so we use the software ones */
+#define HAVE_SW_TONE_CONTROLS
+
+/* TODO: #define AB_REPEAT_ENABLE 1 */
+
+/* FM Tuner */
+#define CONFIG_TUNER      TEA5767
+#define CONFIG_TUNER_XTAL 32768
+
+/* define this if you have a disk storage, i.e. something
+   that needs spinups and can cause skips when shaked */
+#define HAVE_DISK_STORAGE
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+/* #define CONFIG_BACKLIGHT_FADING     BACKLIGHT_FADING_SW_SETTING */
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING      1
+#define MAX_BRIGHTNESS_SETTING     16
+#define DEFAULT_BRIGHTNESS_SETTING 13 /* match OF brightness */
+
+/* define this if you have a light associated with the buttons */
+#define HAVE_BUTTON_LIGHT
+#define HAVE_BUTTONLIGHT_BRIGHTNESS
+
+#define BATTERY_CAPACITY_DEFAULT 630 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN     630 /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX     630 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC       0 /* capacity increment */
+#define BATTERY_TYPES_COUNT        1 /* only one type */
+
+/* Hardware controlled charging */
+#define CONFIG_CHARGING CHARGING_SIMPLE
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/* Define this if you have a PortalPlayer PP5020 */
+#define CONFIG_CPU PP5022
+
+/* Define this if you want to use the PP5020 i2c interface */
+#define CONFIG_I2C I2C_PP5020
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The start address index for ROM builds */
+#define ROM_START 0x00000000
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x100000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      75000000
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_HDD6330
+
+/* Define this if your LCD can set contrast */
+/* #define HAVE_LCD_CONTRAST */
+
+#define MIN_CONTRAST_SETTING        0
+#define MAX_CONTRAST_SETTING        127
+#define DEFAULT_CONTRAST_SETTING    63 /* Match boot contrast */
+
+/* We're able to shut off power to the HDD */
+#define HAVE_ATA_POWER_OFF
+
+/* Offset ( in the firmware file's header ) to the file CRC and data. These are
+   only used when loading the old format rockbox.e200 file */
+#define FIRMWARE_OFFSET_FILE_CRC    0x0
+#define FIRMWARE_OFFSET_FILE_DATA   0x8
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+#define USE_ROCKBOX_USB
+#define USB_VENDOR_ID 0x0471
+#define USB_PRODUCT_ID 0x014C
+#define HAVE_USB_HID_MOUSE
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define MI4_FORMAT
+#define BOOTFILE_EXT    "mi4"
+#define BOOTFILE        "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define ICODE_ATTR_TREMOR_NOT_MDCT
+