Rename targets to be consistent in all places. (FS #10819). Take 2.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23883 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 0 insertions, 183 deletions

diff --git a/firmware/export/config-yh820.h b/firmware/export/config-yh820.h
deleted file mode 100644
index 4968960803..0000000000
--- a/firmware/export/config-yh820.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * This config file is for the Samsung YH-820
- */
-
-#define TARGET_TREE /* this target is using the target tree system */
-
-/* For Rolo and boot loader */
-#define MODEL_NUMBER 57
-#define MODEL_NAME   "Samsung YH-820"
-
-/* define this if you have recording possibility */
-/* todo #define HAVE_RECORDING */
-
-/* Define bitmask of input sources - recordable bitmask can be defined
-   explicitly if different */
-#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN )
-
-/* define the bitmask of hardware sample rates */
-#define HW_SAMPR_CAPS   (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
-                         SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
-                         SAMPR_CAP_11 | SAMPR_CAP_8)
-
-/* define the bitmask of recording sample rates */
-#define REC_SAMPR_CAPS  (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
-                         SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
-                         SAMPR_CAP_11 | SAMPR_CAP_8)
-
-/* Type of LCD */
-#define CONFIG_LCD LCD_S6B33B2
-
-/* LCD dimensions */
-#define LCD_WIDTH  128
-#define LCD_HEIGHT 96
-#define LCD_DEPTH  16   /* 65536 colours */
-#define LCD_PIXELFORMAT RGB565
-
-#ifndef BOOTLOADER
-
-/* define this if you have a real-time clock */
-#define CONFIG_RTC RTC_E8564
-/* TODO ??? */
-//#define HAVE_RTC_ALARM
-
-/* Define this if your LCD can be enabled/disabled */
-#define HAVE_LCD_ENABLE
-
-/* Define this if your LCD can be put to sleep.
-   HAVE_LCD_ENABLE should be defined as well. */
-/* todo #define HAVE_LCD_SLEEP*/
-/* todo #define HAVE_LCD_SLEEP_SETTING */
-#endif /* !BOOTLOADER */
-
-/* Define this for LCD backlight available */
-#define HAVE_BACKLIGHT
-
-/* Define this if your LCD can set contrast */
-#define HAVE_LCD_CONTRAST
-
-#define MIN_CONTRAST_SETTING        0
-#define MAX_CONTRAST_SETTING        255
-#define DEFAULT_CONTRAST_SETTING    137
-
-/* define this if you can flip your LCD */
-/* #define HAVE_LCD_FLIP */
-
-/* define this if you can invert the colours on your LCD */
-/* todo #define HAVE_LCD_INVERT */
-
-/* put the lcd frame buffer in IRAM */
-/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR */
-
-/* define this if you have a bitmap LCD display */
-#define HAVE_LCD_BITMAP
-
-/* define this if you have a colour LCD */
-#define HAVE_LCD_COLOR
-
-/* define this if you want album art for this target */
-#define HAVE_ALBUMART
-
-/* define this to enable bitmap scaling */
-#define HAVE_BMP_SCALING
-
-/* define this to enable JPEG decoding */
-#define HAVE_JPEG
-
-/* define this if you have access to the quickscreen */
-#define HAVE_QUICKSCREEN
-
-/* define this if you have access to the pitchscreen */
-#define HAVE_PITCHSCREEN
-
-/* define this if you would like tagcache to build on this target */
-#define HAVE_TAGCACHE
-
-#define CONFIG_KEYPAD SAMSUNG_YH_PAD
-
-/* Define this if you do software codec */
-#define CONFIG_CODEC SWCODEC
-
-/* define this if you have a disk storage, i.e. something
-   that needs spinups and can cause skips when shaked */
-#define HAVE_DISK_STORAGE
-
-/* define this if you use an ATA controller */
-#define CONFIG_STORAGE STORAGE_ATA
-
-/* We're able to shut off power to the HDD */
-/* todo #define HAVE_ATA_POWER_OFF */
-
-/* Define this if you have a software controlled poweroff */
-#define HAVE_SW_POWEROFF
-
-/* The number of bytes reserved for loadable codecs */
-#define CODEC_SIZE 0x100000
-
-/* The number of bytes reserved for loadable plugins */
-#define PLUGIN_BUFFER_SIZE 0x80000
-
-/* Define this if you have the AK4537 audio codec */
-#define HAVE_AK4537
-
-/* AK4537 has no tone controls, so we use the software ones */
-#define HAVE_SW_TONE_CONTROLS
-
-#define AB_REPEAT_ENABLE 1
-
-#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity */
-#define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
-#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
-#define BATTERY_CAPACITY_INC 50   /* capacity increment */
-#define BATTERY_TYPES_COUNT  1    /* only one type */
-
-/* Hardware controlled charging */
-#define CONFIG_CHARGING CHARGING_SIMPLE
-
-/* define this if the unit can be powered or charged via USB */
-#define HAVE_USB_POWER
-
-/* Define this if you have a PortalPlayer PP5020 */
-#define CONFIG_CPU PP5020
-
-/* Define this if you want to use the PP5020 i2c interface */
-#define CONFIG_I2C I2C_PP5020
-
-/* define this if the hardware can be powered off while charging */
-#define HAVE_POWEROFF_WHILE_CHARGING
-
-/* The start address index for ROM builds */
-#define ROM_START 0x00000000
-
-/* The size of the flash ROM */
-#define FLASH_SIZE 0x100000
-
-/* Define this to the CPU frequency */
-#define CPU_FREQ      75000000
-
-/* USB On-the-go */
-#define CONFIG_USBOTG USBOTG_ARC
-
-/* enable these for the experimental usb stack */
-#define HAVE_USBSTACK
-#define USE_ROCKBOX_USB
-/* todo - check */
-#define USB_VENDOR_ID   0x04e8
-#define USB_PRODUCT_ID  0x5023
-
-/* Define this if you have adjustable CPU frequency */
-#define HAVE_ADJUSTABLE_CPU_FREQ
-
-#define MI4_FORMAT
-#define BOOTFILE_EXT    "mi4"
-#define BOOTFILE        "rockbox." BOOTFILE_EXT
-#define BOOTDIR "/.rockbox"
-
-/* Offset ( in the firmware file's header ) to the file CRC */
-#define FIRMWARE_OFFSET_FILE_CRC    0x00
-
-/* Offset ( in the firmware file's header ) to the real data */
-#define FIRMWARE_OFFSET_FILE_DATA   0x00
-
-#define ICODE_ATTR_TREMOR_NOT_MDCT
-