Split lcd driver into lcd-player and lcd-recorder. Player simulator still needs fixing.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@2370 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 4 insertions, 1086 deletions

diff --git a/firmware/drivers/lcd.c b/firmware/drivers/lcd.c
index 2293191139..38dbe3cc2c 100644
--- a/firmware/drivers/lcd.c
+++ b/firmware/drivers/lcd.c
@@ -17,116 +17,24 @@
  *
  ****************************************************************************/
 
-#include "config.h"
-#include "lcd.h"
-#include "kernel.h"
-#include "thread.h"
-#include <string.h>
-#include <stdlib.h>
-#include "file.h"
-#include "debug.h"
+#include <stdbool.h>
 #include "system.h"
-#include "font.h"
-
-#if defined(SIMULATOR)
-#include "sim_icons.h"
-#endif
-
-/*** definitions ***/
 
 #define LCDR (PBDR_ADDR+1)
 
 #ifdef HAVE_LCD_CHARCELLS
-
 #define LCD_DS  1 // PB0 = 1 --- 0001 ---  LCD-DS
 #define LCD_CS  2 // PB1 = 1 --- 0010 --- /LCD-CS
 #define LCD_SD  4 // PB2 = 1 --- 0100 ---  LCD-SD
 #define LCD_SC  8 // PB3 = 1 --- 1000 ---  LCD-SC
-#ifdef HAVE_NEW_CHARCELL_LCD
-#  define LCD_CONTRAST_SET ((char)0x50)
-#  define LCD_CRAM         ((char)0x80) /* Characters */
-#  define LCD_PRAM         ((char)0xC0) /*  Patterns  */
-#  define LCD_IRAM         ((char)0x40) /*    Icons   */
 #else
-#  define LCD_CONTRAST_SET ((char)0xA8)
-#  define LCD_CRAM         ((char)0xB0) /* Characters */
-#  define LCD_PRAM         ((char)0x80) /*  Patterns  */
-#  define LCD_IRAM         ((char)0xE0) /*    Icons   */
-#endif
-#define LCD_CURSOR(x,y)    ((char)(LCD_CRAM+((y)*16+(x))))
-#define LCD_ICON(i)        ((char)(LCD_IRAM+i))          
-
-#elif HAVE_LCD_BITMAP
-
 #define LCD_SD  1 // PB0 = 1 --- 0001
 #define LCD_SC  2 // PB1 = 1 --- 0010
 #define LCD_RS  4 // PB2 = 1 --- 0100
 #define LCD_CS  8 // PB3 = 1 --- 1000
 #define LCD_DS LCD_RS
+#endif
 
-#define LCD_SET_LOWER_COLUMN_ADDRESS              ((char)0x00)
-#define LCD_SET_HIGHER_COLUMN_ADDRESS             ((char)0x10)
-#define LCD_SET_INTERNAL_REGULATOR_RESISTOR_RATIO ((char)0x20)
-#define LCD_SET_POWER_CONTROL_REGISTER            ((char)0x28)
-#define LCD_SET_DISPLAY_START_LINE                ((char)0x40)
-#define LCD_SET_CONTRAST_CONTROL_REGISTER         ((char)0x81)
-#define LCD_SET_SEGMENT_REMAP                     ((char)0xA0)
-#define LCD_SET_LCD_BIAS                          ((char)0xA2)
-#define LCD_SET_ENTIRE_DISPLAY_OFF                ((char)0xA4)
-#define LCD_SET_ENTIRE_DISPLAY_ON                 ((char)0xA5)
-#define LCD_SET_NORMAL_DISPLAY                    ((char)0xA6)
-#define LCD_SET_REVERSE_DISPLAY                   ((char)0xA7)
-#define LCD_SET_INDICATOR_OFF                     ((char)0xAC)
-#define LCD_SET_INDICATOR_ON                      ((char)0xAD)
-#define LCD_SET_DISPLAY_OFF                       ((char)0xAE)
-#define LCD_SET_DISPLAY_ON                        ((char)0xAF)
-#define LCD_SET_PAGE_ADDRESS                      ((char)0xB0)
-#define LCD_SET_COM_OUTPUT_SCAN_DIRECTION         ((char)0xC0)
-#define LCD_SET_DISPLAY_OFFSET                    ((char)0xD3)
-#define LCD_SET_READ_MODIFY_WRITE_MODE            ((char)0xE0)
-#define LCD_SOFTWARE_RESET                        ((char)0xE2)
-#define LCD_NOP                                   ((char)0xE3)
-#define LCD_SET_END_OF_READ_MODIFY_WRITE_MODE     ((char)0xEE)
-
-/* LCD command codes */
-#define LCD_CNTL_RESET          0xe2    // Software reset
-#define LCD_CNTL_POWER          0x2f    // Power control
-#define LCD_CNTL_CONTRAST       0x81    // Contrast
-#define LCD_CNTL_OUTSCAN        0xc8    // Output scan direction
-#define LCD_CNTL_SEGREMAP       0xa1    // Segment remap
-#define LCD_CNTL_DISPON         0xaf    // Display on
-
-#define LCD_CNTL_PAGE           0xb0    // Page address
-#define LCD_CNTL_HIGHCOL        0x10    // Upper column address
-#define LCD_CNTL_LOWCOL         0x00    // Lower column address
-
-
-#endif /* CHARCELL or BITMAP */
-
-
-/*** generic code ***/
-
-struct scrollinfo {
-    char text[MAX_PATH];
-    char line[32];
-    int textlen;
-    int offset;
-    int startx;
-    int starty;
-    int space;
-};
-
-static void scroll_thread(void);
-static char scroll_stack[DEFAULT_STACK_SIZE];
-static char scroll_name[] = "scroll";
-static char scroll_speed = 8; /* updates per second */
-static char scroll_spacing = 3; /* spaces between end and start of text */
-
-
-static struct scrollinfo scroll; /* only one scroll line at the moment */
-static int scroll_count = 0;
-
-#ifndef SIMULATOR
 /*
  * About /CS,DS,SC,SD
  * ------------------
@@ -174,12 +82,8 @@ static int scroll_count = 0;
  *
  */ 
 
-#define ASM_IMPLEMENTATION
-
-static void lcd_write(bool command, int byte) __attribute__ ((section (".icode")));
-static void lcd_write(bool command, int byte)
-
-#ifdef ASM_IMPLEMENTATION
+void lcd_write(bool command, int byte) __attribute__ ((section (".icode")));
+void lcd_write(bool command, int byte)
 {
     asm("and.b %0, @(r0,gbr)"
          :
@@ -206,26 +110,6 @@ static void lcd_write(bool command, int byte)
              /* %4 */ "I"(LCD_SC),
              /* %5 */ "z"(LCDR));
     else
-#if 0
-        asm ("shll8  %0\n"
-             "0:       \n\t"
-             "and.b  %2, @(r0,gbr)\n\t"
-             "shll   %0\n\t"  
-             "bf     1f\n\t"
-             "or.b   %3, @(r0,gbr)\n"
-             "1:       \n\t"
-             "or.b   %4, @(r0,gbr)\n"
-             "add    #-1, %1\n\t"
-             "cmp/pl %1\n\t"
-             "bt     0b"
-             :
-             : /* %0 */ "r"(((unsigned)byte)<<16),
-             /* %1 */ "r"(8),
-             /* %2 */ "I"(~(LCD_SC|LCD_SD)),
-             /* %3 */ "I"(LCD_SD|LCD_DS),
-             /* %4 */ "I"(LCD_SC|LCD_DS),
-             /* %5 */ "z"(LCDR));
-#else
         asm ("shll8  %0\n"
              "0:       \n\t"
              "and.b  %2, @(r0,gbr)\n\t"
@@ -283,975 +167,9 @@ static void lcd_write(bool command, int byte)
              /* %3 */ "I"(LCD_SD|LCD_DS),
              /* %4 */ "I"(LCD_SC|LCD_DS),
              /* %5 */ "z"(LCDR));
-#endif
 
     asm("or.b %0, @(r0,gbr)"
          :
          : /* %0 */ "I"(LCD_CS|LCD_DS|LCD_SD|LCD_SC),
            /* %1 */ "z"(LCDR));
 }
-#else
-{
-    int i;
-    char on,off;
-
-    PBDR &= ~LCD_CS; /* enable lcd chip select */
-
-    if ( command ) {
-    on=~(LCD_SD|LCD_SC|LCD_DS);
-    off=LCD_SC;
-    }
-    else {
-    on=~(LCD_SD|LCD_SC);
-    off=LCD_SC|LCD_DS;
-    }
-
-    /* clock out each bit, MSB first */
-    for (i=0x80;i;i>>=1)
-    {
-    PBDR &= on;
-    if (i & byte)
-        PBDR |= LCD_SD;
-    PBDR |= off;
-    }
-
-    PBDR |= LCD_CS; /* disable lcd chip select */
-}
-#endif /* ASM_IMPLEMENTATION */
-#endif /* !SIMULATOR */
-
-/*** model specific code */
-
-#ifdef HAVE_LCD_CHARCELLS
-
-#ifdef HAVE_NEW_CHARCELL_LCD
-
-static const unsigned char lcd_ascii[] = {
-   0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
-   0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f,
-   0x10,0x11,0x05,0x13,0x14,0x15,0x16,0x17,
-   0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f,
-   0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,
-   0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,
-   0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37,
-   0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,
-   0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47,
-   0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f,
-   0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57,
-   0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f,
-   0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67,
-   0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f,
-   0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77,
-   0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f,
-   0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,
-   0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,
-   0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,
-   0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f,
-   0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,
-   0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,
-   0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7,
-   0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf,
-   0x41,0x41,0x41,0x41,0x41,0x41,0x20,0x43,
-   0x45,0x45,0x45,0x45,0x49,0x49,0x49,0x49,
-   0x44,0x4e,0x4f,0x4f,0x4f,0x4f,0x4f,0x20,
-   0x20,0x55,0x55,0x55,0x55,0x59,0x20,0x20,
-   0x61,0x61,0x61,0x61,0x61,0x61,0x20,0x63,
-   0x65,0x65,0x65,0x65,0x69,0x69,0x69,0x69,
-   0x6f,0x6e,0x6f,0x6f,0x6f,0x6f,0x6f,0x20,
-   0x20,0x75,0x75,0x75,0x75,0x79,0x20,0x79
-};
-
-#else
-
-static const unsigned char lcd_ascii[] = {
-   0x00,0x01,0x02,0x03,0x00,0x84,0x85,0x89,
-   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-   0xec,0xe3,0xe2,0xe1,0xe0,0xdf,0x15,0x00,
-   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-   0x24,0x25,0x26,0x37,0x06,0x29,0x2a,0x2b,
-   0x2c,0x2d,0x2e,0x2f,0x30,0x31,0x32,0x33,
-   0x34,0x35,0x36,0x37,0x38,0x39,0x3a,0x3b,
-   0x3c,0x3d,0x3e,0x3f,0x40,0x41,0x42,0x43,
-   0x44,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,
-   0x4c,0x4d,0x4e,0x4f,0x50,0x51,0x52,0x53,
-   0x54,0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,
-   0x5c,0x5d,0x5e,0xa9,0x33,0xce,0x00,0x15,
-   0x00,0x65,0x66,0x67,0x68,0x69,0x6a,0x6b,
-   0x6c,0x6d,0x6e,0x6f,0x70,0x71,0x72,0x73,
-   0x74,0x75,0x76,0x77,0x78,0x79,0x7a,0x7b,
-   0x7c,0x7d,0x7e,0x24,0x24,0x24,0x24,0x24,
-   0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,
-   0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,
-   0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,
-   0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f,
-   0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,
-   0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,
-   0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7,
-   0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf,
-   0x45,0x45,0x45,0x45,0x45,0x45,0x24,0x47,
-   0x49,0x49,0x49,0x49,0x4d,0x4d,0x4d,0x4d,
-   0x48,0x52,0x53,0x53,0x53,0x53,0x53,0x24,
-   0x24,0x59,0x59,0x59,0x59,0x5d,0x24,0x24,
-   0x65,0x65,0x65,0x65,0x65,0x65,0x24,0x67,
-   0x69,0x69,0x69,0x69,0x6d,0x6d,0x6d,0x6d,
-   0x73,0x72,0x73,0x73,0x73,0x73,0x73,0x24,
-   0x24,0x79,0x79,0x79,0x79,0x7d,0x24,0x7d
-};
-#endif /* HAVE_NEW_CHARCELL_LCD */
-
-#ifndef SIMULATOR
-void lcd_clear_display(void)
-{
-    int i;
-    lcd_write(true,LCD_CURSOR(0,0));
-    for (i=0;i<32;i++)
-        lcd_write(false,lcd_ascii[' ']);
-}
-
-void lcd_puts(int x, int y, unsigned char *string)
-{
-    int i;
-    lcd_write(true,LCD_CURSOR(x,y));
-    for (i=0; *string && x++<11; i++)
-        lcd_write(false,lcd_ascii[*(unsigned char*)string++]);
-    for (; x<11; x++)
-        lcd_write(false,lcd_ascii[' ']);
-}
-
-void lcd_putc(int x, int y, unsigned char ch)
-{
-    lcd_write(true,LCD_CURSOR(x,y));
-    lcd_write(false,lcd_ascii[ch]);
-}
-
-void lcd_define_pattern (int which,char *pattern,int length)
-{
-    int i;
-    lcd_write(true,LCD_PRAM|which);
-    for (i=0;i<length;i++)
-        lcd_write(false,pattern[i]);
-}
-
-void lcd_double_height(bool on)
-{
-    lcd_write(true,on?9:8);
-}
-
-static char icon_pos[] =
-{
-    0, 0, 0, 0, /* Battery */
-    2, /* USB */
-    3, /* Play */
-    4, /* Record */
-    5, /* Pause */
-    5, /* Audio */
-    6, /* Repeat */
-    7, /* 1 */
-    9,  /* Volume */
-    9,  /* Volume 1 */
-    9,  /* Volume 2 */
-    10, /* Volume 3 */
-    10, /* Volume 4 */
-    10, /* Volume 5 */
-    10, /* Param */
-};
-
-static char icon_mask[] =
-{
-    0x02, 0x08, 0x04, 0x10, /* Battery */
-    0x04, /* USB */
-    0x10, /* Play */
-    0x10, /* Record */
-    0x02, /* Pause */
-    0x10, /* Audio */
-    0x02, /* Repeat */
-    0x01, /* 1 */
-    0x04, /* Volume */
-    0x02, /* Volume 1 */
-    0x01, /* Volume 2 */
-    0x08, /* Volume 3 */
-    0x04, /* Volume 4 */
-    0x01, /* Volume 5 */
-    0x10, /* Param */
-};
-
-void lcd_icon(int icon, bool enable)
-{
-    static unsigned char icon_mirror[11] = {0};
-    int pos, mask;
-
-    pos = icon_pos[icon];
-    mask = icon_mask[icon];
-    
-    lcd_write(true, LCD_ICON(pos));
-    
-    if(enable)
-        icon_mirror[pos] |= mask;
-    else
-        icon_mirror[pos] &= ~mask;
-    
-    lcd_write(false, icon_mirror[pos]);
-}
-#endif /* !SIMULATOR */
-
-#endif /* HAVE_LCD_CHARCELLS */
-
-#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
-void lcd_icon(int icon, bool enable)
-{
-    sim_lcd_icon(icon, enable);
-}
-#endif
-
-#if defined(HAVE_LCD_CHARCELLS) || defined(SIMULATOR) /* not BITMAP */
-void lcd_init (void)
-{
-    create_thread(scroll_thread, scroll_stack,
-                  sizeof(scroll_stack), scroll_name);
-}
-#endif
-
-#ifdef SIMULATOR
-void lcd_set_contrast(int val)
-{
-    val = val;
-}
-#else
-#ifdef HAVE_LCD_BITMAP
-void lcd_set_contrast(int val)
-{
-    lcd_write(true, LCD_CNTL_CONTRAST);
-    lcd_write(true, val);
-}
-#else
-void lcd_set_contrast(int val)
-{
-    lcd_write(true, LCD_CONTRAST_SET);
-    lcd_write(false, 31-val);
-}
-#endif
-#endif
-
-#if defined(HAVE_LCD_BITMAP) || defined(SIMULATOR) /* not CHARCELLS */
-
-/*
- * All bitmaps have this format:
- * Bits within a byte are arranged veritcally, LSB at top.
- * Bytes are stored in column-major format, with byte 0 at top left,
- * byte 1 is 2nd from top, etc.  Bytes following left-most column
- * starts 2nd left column, etc.
- *
- * Note: The HW takes bitmap bytes in row-major order.
- *
- * Memory copy of display bitmap
- */
-unsigned char lcd_framebuffer[LCD_WIDTH][LCD_HEIGHT/8];
-
-static int xmargin=0;
-static int ymargin=0;
-
-/*
- * ASCII character generation tables
- *
- * This contains only the printable characters (0x20-0x7f).
- * Each element in this table is a character pattern bitmap.
- */
-#define    ASCII_MIN            0x20    /* First char in table */
-#define    ASCII_MAX            0x7f    /* Last char in table */
-
-/* All zeros and ones bitmaps for area filling */
-static unsigned char zeros[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-                 0x00, 0x00 };
-static unsigned char ones[]  = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-                 0xff, 0xff };
-
-#ifndef SIMULATOR
-
-/*
- * Initialize LCD
- */
-void lcd_init (void)
-{
-    /* Initialize PB0-3 as output pins */
-    PBCR2 &= 0xff00; /* MD = 00 */
-    PBIOR |= 0x000f; /* IOR = 1 */
-
-    lcd_clear_display();
-    lcd_update();
-    create_thread(scroll_thread, scroll_stack,
-                  sizeof(scroll_stack), scroll_name);
-}
-
-/*
- * Update the display.
- * This must be called after all other LCD functions that change the display.
- */
-void lcd_update (void) __attribute__ ((section (".icode")));
-void lcd_update (void)
-{
-    int x, y;
-
-    /* Copy display bitmap to hardware */
-    for (y = 0; y < LCD_HEIGHT/8; y++)
-    {
-        lcd_write (true, LCD_CNTL_PAGE | (y & 0xf));
-        lcd_write (true, LCD_CNTL_HIGHCOL);
-        lcd_write (true, LCD_CNTL_LOWCOL);
-
-        for (x = 0; x < LCD_WIDTH; x++)
-            lcd_write (false, lcd_framebuffer[x][y]);
-    }
-}
-
-/*
- * Update a fraction of the display.
- */
-void lcd_update_rect (int, int, int, int) __attribute__ ((section (".icode")));
-void lcd_update_rect (int x_start, int y,
-                      int width, int height)
-{
-    int ymax;
-    int xmax;
-    int x;
-
-    /* The Y coordinates have to work on even 8 pixel rows */
-    ymax = (y + height)/8;
-    y /= 8;
-
-    xmax = x_start + width;
-
-    if(xmax > LCD_WIDTH)
-        xmax = LCD_WIDTH;
-    if(ymax >= LCD_HEIGHT/8)
-        ymax = LCD_HEIGHT/8-1;
-
-    /* Copy specified rectange bitmap to hardware */
-    for (; y <= ymax; y++)
-    {
-        lcd_write (true, LCD_CNTL_PAGE | (y & 0xf));
-        lcd_write (true, LCD_CNTL_HIGHCOL | ((x_start>>4) & 0xf));
-        lcd_write (true, LCD_CNTL_LOWCOL | (x_start & 0xf));
-
-        for (x = x_start; x < xmax; x++)
-            lcd_write (false, lcd_framebuffer[x][y]);
-    }
-}
-
-#endif /* SIMULATOR */
-
-/*
- * Clear the display
- */
-void lcd_clear_display (void)
-{
-#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
-    /* Clear just the text portion of the display */
-    int x, y;
-    for (y = 8; y <= (32 + 7); ++y)
-    {
-        for (x = 0; x < LCD_WIDTH; x++)
-            CLEAR_PIXEL(x, y);
-    }
-    /* this function is being used when simulating a charcell LCD and
-       then we update immediately */
-    lcd_update();
-#else
-    memset (lcd_framebuffer, 0, sizeof lcd_framebuffer);
-#endif
-}
-
-void lcd_setmargins(int x, int y)
-{
-    xmargin = x;
-    ymargin = y;
-}
-
-int lcd_getxmargin(void)
-{
-    return xmargin;
-}
-
-int lcd_getymargin(void)
-{
-    return ymargin;
-}
-
-static int curfont = FONT_SYSFIXED;
-
-/*
- * Put a string at specified character position
- */
-void lcd_puts(int x, int y, unsigned char *str)
-{
-    int xpos,ypos,w,h;
-
-#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
-    /* We make the simulator truncate the string if it reaches the right edge,
-       as otherwise it'll wrap. The real target doesn't wrap. */
-
-    char buffer[12];
-    if(strlen(str)+x > 11 ) {
-        strncpy(buffer, str, sizeof buffer);
-        buffer[11-x]=0;
-        str = buffer;
-    }
-    xmargin = 0;
-    ymargin = 8;
-#endif
-
-    if(!str || !str[0])
-        return;
-
-    lcd_getstringsize(str, curfont, &w, &h);
-    xpos = xmargin + x*w / strlen(str);
-    ypos = ymargin + y*h;
-    lcd_putsxy( xpos, ypos, str, curfont);
-    lcd_clearrect(xpos + w, ypos, LCD_WIDTH - (xpos + w), h);
-#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
-    /* this function is being used when simulating a charcell LCD and
-       then we update immediately */
-    lcd_update();
-#endif
-}
-
-/* set current font*/
-void lcd_setfont(int newfont)
-{
-    curfont = newfont;
-}
-
-/*
- * Return width and height of a given font.
- */
-void lcd_getfontsize(int font, int *width, int *height)
-{
-   struct font* pf = font_get(font);
-
-   *width =  pf->maxwidth;
-   *height = pf->height;
-}
-
-
-/*
- * Return width and height of a given font.
- */
-int lcd_getstringsize(unsigned char *str, int font, int *w, int *h)
-{
-    struct font* pf = font_get(font);
-    int ch;
-    int width = 0;
-
-    while((ch = *str++)) {
-        /* check input range*/
-        if (ch < pf->firstchar || ch >= pf->firstchar+pf->size)
-            ch = pf->defaultchar;
-        ch -= pf->firstchar;
-
-        /* get proportional width and glyph bits*/
-        width += pf->width? pf->width[ch]: pf->maxwidth;
-    }
-    *w = width;
-    *h = pf->height;
-
-    return width;
-}
-
-/*
- * Put a string at specified bit position
- */
-void lcd_putsxy(int x, int y, unsigned char *str, int font)
-{
-    int ch;
-    struct font* pf = font_get(font);
-
-    while (((ch = *str++) != '\0')) {
-        bitmap_t *bits;
-        int width;
-
-        /* check input range*/
-        if (ch < pf->firstchar || ch >= pf->firstchar+pf->size)
-            ch = pf->defaultchar;
-        ch -= pf->firstchar;
-
-        /* get proportional width and glyph bits*/
-        width = pf->width ? pf->width[ch] : pf->maxwidth;
-        if (x + width > LCD_WIDTH)
-            break;
-
-        /* no partial-height drawing for now...*/
-        if (y + pf->height > LCD_HEIGHT)
-            break;
-        bits = pf->bits + (pf->offset ? pf->offset[ch] : (pf->height * ch));
-
-        lcd_bitmap((unsigned char *)bits, x, y, width, pf->height, true);
-        x += width;
-    }
-}
-
-/*
- * Display a bitmap at (x, y), size (nx, ny)
- * clear is true to clear destination area first
- */
-void lcd_bitmap (unsigned char *src, int x, int y, int nx, int ny,
-                 bool clear) __attribute__ ((section (".icode")));
-void lcd_bitmap (unsigned char *src, int x, int y, int nx, int ny,
-                 bool clear)
-{
-    unsigned char *dst;
-    unsigned char *dst2;
-    unsigned int data, mask, mask2, mask3, mask4;
-    int shift;
-
-    if (((unsigned)x >= LCD_WIDTH) || ((unsigned)y >= LCD_HEIGHT))
-        return;
-    if (((unsigned)(x + nx)) >= LCD_WIDTH)
-       nx = LCD_WIDTH - x;
-    if (((unsigned)(y + ny)) >= LCD_HEIGHT)
-        ny = LCD_HEIGHT - y;      
-
-    shift = y & 7;
-    dst2 = &lcd_framebuffer[x][y/8];
-    ny += shift;
-
-    /* Calculate bit masks */
-    mask4 = ~(0xfe << ((ny-1) & 7));
-    if (clear)
-    {
-        mask = ~(0xff << shift);
-        mask2 = 0;
-        mask3 = ~mask4;
-        if (ny <= 8)
-            mask3 |= mask;
-    }
-    else
-        mask = mask2 = mask3 = 0xff;
-
-    /* Loop for each column */
-    for (x = 0; x < nx; x++)
-    {
-        dst = dst2;
-        dst2 += LCD_HEIGHT/8;
-        data = 0;
-        y = 0;
-
-        if (ny > 8)
-        {
-            /* First partial row */
-            data = *src++ << shift;
-            *dst = (*dst & mask) | data;
-            data >>= 8;
-            dst++;
-
-            /* Intermediate rows */
-            for (y = 8; y < ny-8; y += 8)
-            {
-                data |= *src++ << shift;
-                *dst = (*dst & mask2) | data;
-                data >>= 8;
-                dst++;
-            }
-        }
-
-        /* Last partial row */
-        if (y + shift < ny)
-            data |= *src++ << shift;
-        *dst = (*dst & mask3) | (data & mask4);
-    }
-}
-
-/* 
- * Draw a rectangle with point a (upper left) at (x, y)
- * and size (nx, ny)
- */
-void lcd_drawrect (int x, int y, int nx, int ny)
-{
-    int i;
-
-    if (x > LCD_WIDTH)
-        return;
-    if (y > LCD_HEIGHT)
-        return;
-
-    if (x + nx > LCD_WIDTH)
-        nx = LCD_WIDTH - x;
-    if (y + ny > LCD_HEIGHT)
-        ny = LCD_HEIGHT - y;
-
-    /* vertical lines */
-    for (i = 0; i < ny; i++) {
-        DRAW_PIXEL(x, (y + i));
-        DRAW_PIXEL((x + nx - 1), (y + i));
-    }
-
-    /* horizontal lines */
-    for (i = 0; i < nx; i++) {
-        DRAW_PIXEL((x + i),y);
-        DRAW_PIXEL((x + i),(y + ny - 1));
-    }
-}
-
-/*
- * Clear a rectangular area at (x, y), size (nx, ny)
- */
-void lcd_clearrect (int x, int y, int nx, int ny)
-{
-    int i;
-    for (i = 0; i < nx; i++)
-        lcd_bitmap (zeros, x+i, y, 1, ny, true);
-}
-
-/*
- * Fill a rectangular area at (x, y), size (nx, ny)
- */
-void lcd_fillrect (int x, int y, int nx, int ny)
-{
-    int i;
-    for (i = 0; i < nx; i++)
-        lcd_bitmap (ones, x+i, y, 1, ny, true);
-}
-
-/* Invert a rectangular area at (x, y), size (nx, ny) */
-void lcd_invertrect (int x, int y, int nx, int ny)
-{
-    int i, j;
-
-    if (x > LCD_WIDTH)
-        return;
-    if (y > LCD_HEIGHT)
-        return;
-
-    if (x + nx > LCD_WIDTH)
-        nx = LCD_WIDTH - x;
-    if (y + ny > LCD_HEIGHT)
-        ny = LCD_HEIGHT - y;
-
-    for (i = 0; i < nx; i++)
-        for (j = 0; j < ny; j++)
-            INVERT_PIXEL((x + i), (y + j));
-}
-
-void lcd_drawline( int x1, int y1, int x2, int y2 )
-{
-    int numpixels;
-    int i;
-    int deltax, deltay;
-    int d, dinc1, dinc2;
-    int x, xinc1, xinc2;
-    int y, yinc1, yinc2;
-
-    deltax = abs(x2 - x1);
-    deltay = abs(y2 - y1);
-
-    if(deltax >= deltay)
-    {
-        numpixels = deltax;
-        d = 2 * deltay - deltax;
-        dinc1 = deltay * 2;
-        dinc2 = (deltay - deltax) * 2;
-        xinc1 = 1;
-        xinc2 = 1;
-        yinc1 = 0;
-        yinc2 = 1;
-    }
-    else
-    {
-        numpixels = deltay;
-        d = 2 * deltax - deltay;
-        dinc1 = deltax * 2;
-        dinc2 = (deltax - deltay) * 2;
-        xinc1 = 0;
-        xinc2 = 1;
-        yinc1 = 1;
-        yinc2 = 1;
-    }
-    numpixels++; /* include endpoints */
-
-    if(x1 > x2)
-    {
-        xinc1 = -xinc1;
-        xinc2 = -xinc2;
-    }
-
-    if(y1 > y2)
-    {
-        yinc1 = -yinc1;
-        yinc2 = -yinc2;
-    }
-
-    x = x1;
-    y = y1;
-
-    for(i=0; i<numpixels; i++)
-    {
-        DRAW_PIXEL(x,y);
-
-        if(d < 0)
-        {
-            d += dinc1;
-            x += xinc1;
-            y += yinc1;
-        }
-        else
-        {
-            d += dinc2;
-            x += xinc2;
-            y += yinc2;
-        }
-    }
-}
-
-void lcd_clearline( int x1, int y1, int x2, int y2 )
-{
-    int numpixels;
-    int i;
-    int deltax, deltay;
-    int d, dinc1, dinc2;
-    int x, xinc1, xinc2;
-    int y, yinc1, yinc2;
-
-    deltax = abs(x2 - x1);
-    deltay = abs(y2 - y1);
-
-    if(deltax >= deltay)
-    {
-        numpixels = deltax;
-        d = 2 * deltay - deltax;
-        dinc1 = deltay * 2;
-        dinc2 = (deltay - deltax) * 2;
-        xinc1 = 1;
-        xinc2 = 1;
-        yinc1 = 0;
-        yinc2 = 1;
-    }
-    else
-    {
-        numpixels = deltay;
-        d = 2 * deltax - deltay;
-        dinc1 = deltax * 2;
-        dinc2 = (deltax - deltay) * 2;
-        xinc1 = 0;
-        xinc2 = 1;
-        yinc1 = 1;
-        yinc2 = 1;
-    }
-    numpixels++; /* include endpoints */
-
-    if(x1 > x2)
-    {
-        xinc1 = -xinc1;
-        xinc2 = -xinc2;
-    }
-
-    if(y1 > y2)
-    {
-        yinc1 = -yinc1;
-        yinc2 = -yinc2;
-    }
-
-    x = x1;
-    y = y1;
-
-    for(i=0; i<numpixels; i++)
-    {
-        CLEAR_PIXEL(x,y);
-
-        if(d < 0)
-        {
-            d += dinc1;
-            x += xinc1;
-            y += yinc1;
-        }
-        else
-        {
-            d += dinc2;
-            x += xinc2;
-            y += yinc2;
-        }
-    }
-}
-
-/*
- * Set a single pixel
- */
-void lcd_drawpixel(int x, int y)
-{
-    DRAW_PIXEL(x,y);
-}
-
-/*
- * Clear a single pixel
- */
-void lcd_clearpixel(int x, int y)
-{
-    CLEAR_PIXEL(x,y);
-}
-
-/*
- * Invert a single pixel
- */
-void lcd_invertpixel(int x, int y)
-{
-    INVERT_PIXEL(x,y);
-}
-
-#else
-/* no LCD defined, no code to use */
-#endif
-
-void lcd_puts_scroll(int x, int y, unsigned char* string )
-{
-    struct scrollinfo* s = &scroll;
-#ifdef HAVE_LCD_CHARCELLS
-    s->space = 11 - x;
-#else
-    unsigned char ch[2];
-    int w, h;
-    int width, height;
-    lcd_getfontsize(curfont, &width, &height);
-
-    ch[1] = 0; /* zero terminate */
-    ch[0] = string[0];
-    width = 0;
-    s->space = 0;
-    while ( ch[0] &&
-            (width + lcd_getstringsize(ch, curfont, &w, &h) <
-             (LCD_WIDTH - x*8))) {
-        width += w;
-        s->space++;
-        ch[0]=string[s->space];
-    }
-#endif
-
-    lcd_puts(x,y,string);
-    s->textlen = strlen(string);
-
-#ifdef HAVE_LCD_BITMAP
-    s->space += 2;
-    lcd_getstringsize(string,curfont,&w,&h);
-    if ( w > LCD_WIDTH - xmargin ) {
-#else
-    if ( s->textlen > s->space ) {
-#endif
-        s->offset=s->space;
-        s->startx=x;
-        s->starty=y;
-        strncpy(s->text,string,sizeof s->text);
-        s->text[sizeof s->text - 1] = 0;
-        memset(s->line, 0, sizeof s->line);
-        strncpy(s->line,string,
-                s->space > (int)sizeof s->line ?
-                (int)sizeof s->line : s->space );
-        s->line[sizeof s->line - 1] = 0;
-        scroll_count = 1;
-    }
-}
-
-
-void lcd_stop_scroll(void)
-{
-    if ( scroll_count ) {
-        struct scrollinfo* s = &scroll;
-        scroll_count = 0;
-
-#ifdef HAVE_LCD_BITMAP
-        {
-            int w,h;
-            /* FIXME no font index */
-            lcd_getstringsize( s->text, FONT_UI, &w, &h);
-            lcd_clearrect(xmargin + s->startx*w/s->textlen,
-                          ymargin + s->starty*h,
-                          LCD_WIDTH - xmargin,
-                          h);
-        }
-#endif
-        /* restore scrolled row */
-        lcd_puts(s->startx,s->starty,s->text);
-        lcd_update();
-    }
-}
-
-void lcd_scroll_pause(void)
-{
-    scroll_count = 0;
-}
-
-void lcd_scroll_resume(void)
-{
-    scroll_count = 1;
-}
-
-void lcd_scroll_speed(int speed)
-{
-    scroll_speed = speed;
-}
-
-static void scroll_thread(void)
-{
-    struct scrollinfo* s = &scroll;
-
-    while ( 1 ) {
-        if ( !scroll_count ) {
-            yield();
-            continue;
-        }
-        /* wait 0.5s before starting scroll */
-        if ( scroll_count < scroll_speed/2 )
-            scroll_count++;
-        else {
-            int i;
-            for ( i=0; i<s->space-1; i++ )
-                s->line[i] = s->line[i+1];
-
-            if ( s->offset < s->textlen ) {
-                s->line[(int)s->space - 1] = s->text[(int)s->offset];
-                s->offset++;
-            }
-            else {
-                s->line[s->space - 1] = ' ';
-                if ( s->offset < s->textlen + scroll_spacing - 1 )
-                    s->offset++;
-                else
-                    s->offset = 0;
-            }
-
-#ifdef HAVE_LCD_BITMAP
-	    {
-	        /* FIXME no font index */
-		int w, h;
-                lcd_getstringsize( s->text, FONT_UI, &w, &h);
-                lcd_clearrect(xmargin + s->startx*w/s->textlen,
-                              ymargin + s->starty*h,
-                              LCD_WIDTH - xmargin,
-                              h);
-	    }
-#endif
-            lcd_puts(s->startx,s->starty,s->line);
-            lcd_update();
-        }
-        sleep(HZ/scroll_speed);
-    }
-}
-
-#ifndef SIMULATOR
-#ifdef HAVE_LCD_BITMAP 
-/**
- * Rolls up the lcd display by the specified amount of lines.
- * Lines that are rolled out over the top of the screen are
- * rolled in from the bottom again. This is a hardware 
- * remapping only and all operations on the lcd are affected.
- * -> 
- * @param int lines - The number of lines that are rolled. 
- *  The value must be 0 <= pixels < LCD_HEIGHT.
- */
-void lcd_roll(int lines)
-{
-    lcd_write(true, LCD_SET_DISPLAY_START_LINE | (lines & (LCD_HEIGHT-1)));
-}
-#endif
-#endif
-
-/* -----------------------------------------------------------------
- * local variables:
- * eval: (load-file "../rockbox-mode.el")
- * end:
- */