patch #908634 applied

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@4413 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 348 insertions, 43 deletions

diff --git a/apps/plugins/vu_meter.c b/apps/plugins/vu_meter.c
index 685d2f65d8..a9d74da794 100644
--- a/apps/plugins/vu_meter.c
+++ b/apps/plugins/vu_meter.c
@@ -15,20 +15,30 @@
  * KIND, either express or implied.
  *
  **************************************************************************/
+
+ /******************************************************
+  * Quick note: throughout this code you'll see
+  * comments like this one, inside of a box. They are
+  * used to indicate new functions, not because I
+  * think you're blind. Only here to help.
+  ******************************************************/
+
 #include "plugin.h"
 
-#ifndef SIMULATOR
 #ifdef HAVE_LCD_BITMAP
 
 static struct plugin_api* rb;
 
 /* This table is used to define x positions on a logarithmic (dBfs) scale.
-   The formula I used to figure these out was log(x+1)*31.89293,
+   There are 112 of them, one for each pixel.
+   The formula I used to figure these out was log(x)*32.09,
    where x was the original x position. */
-static unsigned char db_scale[] = {0,9.6,15.2,19.2,22.3,24.8,27,28.8,30.4,31.9,33.2,34.4,35.5,36.6,37.5,38.4,
-                                   39.2,40,40.8,41.5,52.2,42.8,43.4,44,44.6,45.1,45.7,46.2,46.6,47.1,47.6,48,
-                                   48.4,48.8,49.2,49.6,50,50.4,50.7,51.1,51.4,51.8,52.1,52.4,52.7,53,53.3,53.6,
-                                   53.9,54.2,54.5,54.7,55,55.3,55.5,55.8,56};
+static unsigned char db_scale[] = {0,0,10,15,19,22,25,27,29,31,32,33,35,36,37,38,39,39,40,41,42,42,
+                                    43,44,44,45,45,46,46,47,47,48,48,49,49,50,50,50,51,51,51,52,52,
+                                    52,53,53,53,54,54,54,55,55,55,55,56,56,56,56,56,66, 71,75,78,81,
+                                    83,85,87,88,89,91,92,93,94,95,95,96,97,98,98,99,100,100,101,101,
+                                    102,102,103,103,104,104,105,105,106,106,106,107,107,107,108,108,
+                                    108,109,109,109,110,110,110,111,111,111,111,112,112,112};
 
 /* Define's y positions, and makes it look like an arch, like a real needle would. */
 static unsigned char y_values[] = {32,31,30,29,28,27,26,25,24,24,23,22,22,21,21,20,19,19,18,18,18,18,18,17,17,17,17,17,
@@ -36,81 +46,328 @@ static unsigned char y_values[] = {32,31,30,29,28,27,26,25,24,24,23,22,22,21,21,
                                    32,31,30,29,28,27,26,25,24,24,23,22,22,21,21,20,19,19,18,18,18,18,18,17,17,17,17,17,
                                    17,17,17,17,17,18,18,18,18,18,19,19,20,21,21,22,22,23,24,24,25,26,27,28,29,30,31,32};
 
+/***************************************************
+ * LCD Bitmaps/Icons
+ ***************************************************/
+
 /* Linear mode bitmap icon. */
-static unsigned char mode_linear[] = {0xDF,0x10,0xD0,0x00,0xDF,0x00,0xDF,0x02,0xC4,0x08,0xDF,
-                                      0x00,0xDF,0x15,0xD1,0x00,0xDE,0x05,0xDE,0x00,0xDF,0x05,
-                                      0xDA};
+unsigned char mode_linear[] = {0xDF,0x10,0xD0,0x00,0xDF,0x00,0xDF,0x02,0xC4,0x08,0xDF,
+                               0x00,0xDF,0x15,0xD1,0x00,0xDE,0x05,0xDE,0x00,0xDF,0x05,
+                               0xDA};
 
 /* Logarithmic (dBfs) mode bitmap icon. */
-static unsigned char mode_dbfs[] =   {0xC8,0x14,0x14,0x1F,0x00,0xDF,0x15,0x15,0x0A,0xC0,0x1E,
-                                      0x05,0x05,0xC0,0x16,0x15,0xD5,0x09,0xC0,0x00,0xF0,0x00,
-                                      0xFE};
+unsigned char mode_dbfs[] =   {0xC8,0x14,0x14,0x1F,0x00,0xDF,0x15,0x15,0x0A,0xC0,0x1E,
+                               0x05,0x05,0xC0,0x16,0x15,0xD5,0x09,0xC0,0x00,0xF0,0x00,
+                               0xFE};
+
+/* Channel indicator - no level     [4x8] */
+static unsigned char sound_speaker[] = {0x18,0x24,0x42,0xFF};
+
+/* Channel indicator - low level    [2x8] */
+static unsigned char sound_low_level[] = {0x24,0x18};
+
+/* Channel indicator - medium level [2x8] */
+static unsigned char sound_med_level[] = {0x42,0x3C};
+
+/* Channel indicator - high level   [2x8] */
+static unsigned char sound_high_level[] = {0x81,0x7E};
+
+/* Channel indicator - maxed out    [3x8] */
+static unsigned char sound_max_level[] = {0x0E,0xDF,0x0E};
+
+/* Volume level icon                [4x7] */
+static unsigned char volume_indicator[] = {0x1C,0x1C,0x22,0x7F};
 
+/* RIGHT ARROW icon (from icons.c)  [7x8] */
+static unsigned char right_arrow[] = {0x7F,0x3E,0x1C,0x7F,0x3E,0x1C,0x08};
 
+/* LEFT ARROW icon (from icons.c)   [7x8] */
+static unsigned char left_arrow[] = {0x08,0x1C,0x3E,0x7F,0x1C,0x3E,0x7F};
+
+/*************************
+ * DEFINES
+ *************************/
 #define MAX_PEAK 0x7FFF
 #define NEEDLE_BOTTOM_Y 54
 
+/******************************
+ * LEFT NEEDLE ints
+ ******************************/
 #define LEFT_NEEDLE_BOTTOM_X 28
 int left_needle_top_y;
 int left_needle_top_x;
 int old_left_needle_top_x = 0;
 int left_needle_top_x_no_log;
 
+/*******************************
+ * RIGHT NEEDLE ints
+ *******************************/
 #define RIGHT_NEEDLE_BOTTOM_X 84
 int right_needle_top_y;
 int right_needle_top_x;
 int old_right_needle_top_x = 56;
 int right_needle_top_x_no_log;
 
-bool show_arch = true;
+/*********************
+ * LEFT MINIMETER ints
+ *********************/
+int mini_left_low;
+int mini_left_med;
+int mini_left_high;
+int mini_left_clip;
+
+/**********************
+ * RIGHT MINIMETER ints
+ **********************/
+int mini_right_low;
+int mini_right_med;
+int mini_right_high;
+int mini_right_clip;
+
+/************************
+ * GENERAL ints
+ ************************/
+char curr_vol[3];          /* CURRENT VOLUME */
+int vol;                   /* CURENNT VOLUME int */
+int on = 1;                /* MINIMETER OPTIONS int */
+int needle_cover_mode = 1; /* NEEDLE COVER int (defaults to "rounded") */
+int arch = 1;              /* ARCH int (defaults to "solid") */
+int decay = 3;             /* DECAY int (defaults to "medium") */
+
+/*************************
+ * GENERAL bools
+ *************************/
+bool quit = false;
 bool use_log_scale = true;
-int needle_cover_mode = 1;
+bool use_minimeters = true;
+
+/********************************************
+ * Change the volume - derived from VIDEO.C
+ ********************************************/
+void ChangeVolume(int delta)
+{
+    vol = rb->global_settings->volume + delta;
 
-/* This draws everthing but the needles, needle covers, and the visible arch. */
+    if (vol > 100) vol = 100;
+    else if (vol < 0) vol = 0;
+    if (vol != rb->global_settings->volume)
+    {
+        rb->mpeg_sound_set(SOUND_VOLUME, vol);
+        rb->global_settings->volume = vol;
+        rb->snprintf(curr_vol, sizeof(curr_vol), "%d", vol);
+    }
+}
+
+/*****************************************************
+ * Draw the status bar
+ *****************************************************/
 void draw_status_bar(void)
 {
     rb->lcd_setfont(FONT_SYSFIXED);
-    rb->lcd_clear_display();
 
-    rb->lcd_drawline(0, 10, 111, 10);
+    rb->lcd_drawline(0, 10, 112, 10);
     rb->lcd_putsxy(1, 1, "VU Meter");
+    rb->lcd_drawline(52, 1, 52, 8);
+    rb->lcd_bitmap(volume_indicator, 60, 1, 4, 7, true);
+    rb->lcd_putsxy(65, 1, curr_vol);
+    rb->lcd_drawline(85, 1, 85, 8);
 
     if(use_log_scale)
         rb->lcd_bitmap(mode_dbfs, 88, 1, 23, 8, true);
     else
         rb->lcd_bitmap(mode_linear, 88, 1, 23, 8, true);
 
-    rb->lcd_putsxy(25, 56, "L");
-    rb->lcd_putsxy(81, 56, "R");
-
     /* The last line under the needle covers. */
     rb->lcd_drawline(0, 54, 111, 54);
 
-    rb->lcd_update();
+    rb->lcd_update_rect(0, 0, 112, 10);
+}
+
+/******************************
+ * DRAW left MiniMeters
+ ******************************/
+
+void draw_left_minimeters(void)
+{
+    rb->lcd_bitmap(sound_speaker, 22, 56, 4, 8, true);
+
+    if(5<left_needle_top_x_no_log)
+        rb->lcd_bitmap(sound_low_level, 27, 56, 2, 8, false);
+    if(12<left_needle_top_x_no_log)
+        rb->lcd_bitmap(sound_med_level, 30, 56, 2, 8, false);
+    if(24<left_needle_top_x_no_log)
+        rb->lcd_bitmap(sound_high_level, 33, 56, 2, 8, false);
+    if(40<left_needle_top_x_no_log)
+        rb->lcd_bitmap(sound_max_level, 36, 56, 3, 8, false);
+}
+
+/*******************************
+ * DRAW right MiniMeters
+ *******************************/
+void draw_right_minimeters(void)
+{
+    rb->lcd_bitmap(sound_speaker, 79, 56, 4, 8, true);
+
+    if(5<(right_needle_top_x_no_log-56))
+        rb->lcd_bitmap(sound_low_level, 84, 56, 2, 8, false);
+    if(12<(right_needle_top_x_no_log-56))
+        rb->lcd_bitmap(sound_med_level, 87, 56, 2, 8, false);
+    if(24<(right_needle_top_x_no_log-56))
+        rb->lcd_bitmap(sound_high_level, 90, 56, 2, 8, false);
+    if(40<(right_needle_top_x_no_log-56))
+        rb->lcd_bitmap(sound_max_level, 93, 56, 3, 8, false);
+}
+
+/***************************************
+ * GENERAL SETTINGS - F1
+ ***************************************/
+void general_settings(void)
+{
+    char buf[15];
+    int w, h;
+
+    while(!quit)
+    {
+        rb->lcd_clear_display();
+
+        /* Left hand side (needle covers) */
+        rb->lcd_putsxy(0, 15, "Needle");
+        rb->lcd_putsxy(0, 23, "Covers:");
+        if(needle_cover_mode == 1)
+            rb->lcd_putsxy(0, 32, "Rounded");
+        else
+            rb->lcd_putsxy(0, 32, "Pyramid");
+        rb->lcd_bitmap(left_arrow, 43, 23, 7, 8, true);
+
+        /* Right hand side (visible arch) */
+        rb->snprintf(buf, sizeof(buf), "Visible");
+        rb->lcd_getstringsize(buf, &w, &h);
+        rb->lcd_putsxy(LCD_WIDTH-w, 15, buf);
+        rb->snprintf(buf, sizeof(buf), "Arch:");
+        rb->lcd_getstringsize(buf, &w, &h);
+        rb->lcd_putsxy(LCD_WIDTH-w, 23, buf);
+        rb->lcd_bitmap(right_arrow, 62, 23, 7, 8, true);
+        if(arch == 1)
+        {
+            rb->snprintf(buf, sizeof(buf), "Solid");
+            rb->lcd_getstringsize(buf, &w, &h);
+            rb->lcd_putsxy(LCD_WIDTH-w, 32, buf);
+        }
+        else if(arch == 2)
+        {
+            rb->snprintf(buf, sizeof(buf), "Dotted");
+            rb->lcd_getstringsize(buf, &w, &h);
+            rb->lcd_putsxy(LCD_WIDTH-w, 32, buf);
+        }
+        else
+        {
+			rb->snprintf(buf, sizeof(buf), "Off");
+			rb->lcd_getstringsize(buf, &w, &h);
+			rb->lcd_putsxy(LCD_WIDTH-w, 32, buf);
+		}
+
+        rb->lcd_update();
+
+        switch(rb->button_get_w_tmo(HZ/4))
+        {
+            case BUTTON_F1:
+            case BUTTON_OFF:
+                quit = true;
+                break;
+
+            case BUTTON_RIGHT:
+                arch==3 ? arch=1 : arch++;
+                break;
+
+            case BUTTON_LEFT:
+                needle_cover_mode==2 ? needle_cover_mode=1 : needle_cover_mode++;
+                break;
+        }
+    }
 }
 
+/*****************************
+ * User Decay settings
+ *****************************/
+void user_decay_settings(void)
+{
+    while(!quit)
+    {
+		rb->lcd_clear_display();
+
+		rb->lcd_putsxy(2, 0, "User Decay Options");
+		rb->lcd_putsxy(5, 15, "Release Speed:");
+
+		switch(decay)
+		{
+			case 0: rb->lcd_putsxy(5, 23, "No Decay");    break;
+			case 1: rb->lcd_putsxy(5, 23, "Very Fast");   break;
+			case 2: rb->lcd_putsxy(5, 23, "Fast");        break;
+			case 3: rb->lcd_putsxy(5, 23, "Medium");      break;
+			case 4: rb->lcd_putsxy(5, 23, "Medium-Slow"); break;
+			case 5: rb->lcd_putsxy(5, 23, "Slow");        break;
+			case 6: rb->lcd_putsxy(5, 23, "Very Slow");   break;
+			default: break;
+		}
+
+		rb->lcd_putsxy(2, 48, "UP/DOWN: Change");
+		rb->lcd_putsxy(2, 56, "OFF/F2: Back to VU");
+
+		rb->lcd_update();
+
+		switch(rb->button_get_w_tmo(HZ/4))
+		{
+			case BUTTON_F2:
+			case BUTTON_OFF:
+			    quit = true;
+			    break;
+
+			case BUTTON_DOWN:
+			    decay == 6 ? decay = 0 : decay++;
+			    break;
+
+			case BUTTON_UP:
+			    decay == 0 ? decay = 6 : decay--;
+			    break;
+		}
+	}
+}
+
+/***********************************************************************
+ * PLUGIN STARTS HERE
+ ***********************************************************************/
 enum plugin_status plugin_start(struct plugin_api* api, void* parameter)
 {
     TEST_PLUGIN_API(api);
     (void) parameter;
     rb = api;
 
-    draw_status_bar();
+    /* Calculate the volume right away */
+    vol = rb->global_settings->volume;
+    rb->snprintf(curr_vol, sizeof(curr_vol), "%d", vol);
 
+    rb->splash(HZ*2, true, "Press [ON] for help");
     while (!PLUGIN_OK)
     {
+        quit = false;
+
+        #ifdef SIMULATOR
+        left_needle_top_x_no_log = rb->rand()%56;
+        right_needle_top_x_no_log = (rb->rand()%56)+56;
+        #else
         left_needle_top_x_no_log =
             (rb->mas_codec_readreg(0xC) * 56 / MAX_PEAK);
 
         right_needle_top_x_no_log =
             (rb->mas_codec_readreg(0xD) * 56 / MAX_PEAK) + 56;
+        #endif
 
         rb->lcd_clear_display();
 
         if (use_log_scale)
         {
             left_needle_top_x = db_scale[left_needle_top_x_no_log];
-            right_needle_top_x = db_scale[right_needle_top_x_no_log-56]+56;
+            right_needle_top_x = db_scale[right_needle_top_x_no_log];
         }
 
         else
@@ -119,9 +376,9 @@ enum plugin_status plugin_start(struct plugin_api* api, void* parameter)
             right_needle_top_x = right_needle_top_x_no_log;
         }
 
-        /* Makes a decay on the needle. Todo: Make a user custom decay. */
-        left_needle_top_x = (left_needle_top_x+old_left_needle_top_x*2)/3;
-        right_needle_top_x = (right_needle_top_x+old_right_needle_top_x*2)/3;
+        /* Makes a decay on the needle (Custom Decay is at F2) */
+        left_needle_top_x = (left_needle_top_x+old_left_needle_top_x*decay)/(decay+1);
+        right_needle_top_x = (right_needle_top_x+old_right_needle_top_x*decay)/(decay+1);
 
         old_left_needle_top_x = left_needle_top_x;
         old_right_needle_top_x = right_needle_top_x;
@@ -136,6 +393,7 @@ enum plugin_status plugin_start(struct plugin_api* api, void* parameter)
         rb->lcd_drawline(RIGHT_NEEDLE_BOTTOM_X, NEEDLE_BOTTOM_Y,
                          right_needle_top_x, right_needle_top_y);
 
+        /* We've got four needle cover modes... */
         if(needle_cover_mode == 1)  /* Rounded needle cover. */
         {
             /* Left needle cover, top to bottom */
@@ -170,47 +428,95 @@ enum plugin_status plugin_start(struct plugin_api* api, void* parameter)
             rb->lcd_drawline(80, 53, 88, 53);
         }
 
-        if(show_arch)
+        if(arch == 1) /* Solid */
         {
             int i;
-            for(i=0;i<=112;i++)
+            for(i=0; i<=112; i++)
                 rb->lcd_drawpixel(i, (y_values[i])-2 );
         }
+        else if(arch == 2) /* Dotted */
+        {
+            int i;
+            for(i=0; i<=112; i+=2)
+                rb->lcd_drawpixel(i, y_values[i]);
+        }
+
+        if(use_minimeters)
+        {
+            draw_left_minimeters();
+            draw_right_minimeters();
+        }
 
-        rb->lcd_update_rect(0,15,112,39);
+        draw_status_bar();
 
-        switch (rb->button_get_w_tmo(1))
+        rb->lcd_update();
+
+        /* Using a faster timeout like "1" makes the
+         * minimeters flicker, HZ/35 looks good. */
+        switch (rb->button_get_w_tmo(HZ/35))
         {
+            /* EXIT */
             case BUTTON_OFF:
                 return PLUGIN_OK;
                 break;
 
+            /* INFO */
             case BUTTON_ON:
                 rb->lcd_clear_display();
-                rb->lcd_putsxy(1, 1, "Information:");
-                rb->lcd_putsxy(2, 15, "OFF: Exit");
-                rb->lcd_putsxy(2, 25, "ON: This Info");
-                rb->lcd_putsxy(2, 35, "PLAY: Change Scale");
-                rb->lcd_putsxy(2, 45, "F1: Needle Covers");
-                rb->lcd_putsxy(2, 55, "F2: Visible Arch");
-                rb->lcd_update();
-                rb->sleep(HZ*3);
-                draw_status_bar();
+                while(!quit)
+                {
+                    rb->lcd_puts(0, 0, "OFF: Exit Plugin");
+                    rb->lcd_puts(0, 1, "PLAY: Change Scale");
+                    rb->lcd_puts(0, 2, "F1: Settings");
+                    rb->lcd_puts(0, 3, "F2: Custom Decay");
+                    rb->lcd_puts(0, 4, "F3: Mini-Meters");
+                    rb->lcd_puts(0, 5, "UP/DOWN: Volume");
+                    rb->lcd_puts(0, 7, "ON to exit...");
+
+                    rb->lcd_update();
+
+                    switch(rb->button_get_w_tmo(HZ/4))
+                    {
+                        case BUTTON_ON:
+                            quit = true;
+                            break;
+                    }
+                }
                 break;
 
+            /* SCALE switch */
             case BUTTON_PLAY:
                 use_log_scale = !use_log_scale;
-                draw_status_bar();
                 break;
 
+            /* GENERAL SETTINGS screen */
             case BUTTON_F1:
-                needle_cover_mode==2 ? needle_cover_mode=1 : needle_cover_mode++;
+                general_settings();
                 break;
 
+            /* DECAY SETTINGS screen */
             case BUTTON_F2:
-                show_arch = !show_arch;
+                user_decay_settings();
+                break;
+
+            /* MINIMETER SETTINGS screen */
+            case BUTTON_F3:
+                use_minimeters = !use_minimeters;
+                break;
+
+            /* VOLUME UP */
+            case BUTTON_UP:
+            case BUTTON_UP | BUTTON_REPEAT:
+                ChangeVolume(1);
+                break;
+
+            /* VOLUME DOWN */
+            case BUTTON_DOWN:
+            case BUTTON_DOWN | BUTTON_REPEAT:
+                ChangeVolume(-1);
                 break;
 
+            /* USB CONNECTED */
             case SYS_USB_CONNECTED:
                 rb->usb_screen();
                 return PLUGIN_USB_CONNECTED;
@@ -219,4 +525,3 @@ enum plugin_status plugin_start(struct plugin_api* api, void* parameter)
     }
 }
 #endif /* #ifdef HAVE_LCD_BITMAP */
-#endif /* #ifndef SIMULATOR */