Improved ADC driver for AS3514 (used in PP5024 - ie. Sansa e200) based off datasheet.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12745 a1c6a512-1295-4272-9138-f99709370657

5 files changed, 70 insertions, 15 deletions

diff --git a/apps/debug_menu.c b/apps/debug_menu.c
index b08fcb461f..996f13d55c 100644
--- a/apps/debug_menu.c
+++ b/apps/debug_menu.c
@@ -1190,6 +1190,34 @@ bool dbg_ports(void)
         lcd_puts(0, line++, buf);
         snprintf(buf, sizeof(buf), "ADC_SCROLLPAD: %02x", adc_read(ADC_SCROLLPAD));
         lcd_puts(0, line++, buf);
+#elif defined(SANSA_E200)
+        line++;
+        snprintf(buf, sizeof(buf), "ADC_BVDD:   %02x", adc_read(ADC_BVDD));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_RTCSUP: %02x", adc_read(ADC_RTCSUP));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_UVDD:    %02x", adc_read(ADC_UVDD));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_CHG_IN: %02x", adc_read(ADC_CHG_IN));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_CVDD: %02x", adc_read(ADC_CVDD));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_BATTEMP: %02x", adc_read(ADC_BATTEMP));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_MICSUP1: %02x", adc_read(ADC_MICSUP1));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_MICSUP2: %02x", adc_read(ADC_MICSUP2));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_VBE1: %02x", adc_read(ADC_VBE1));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_VBE2: %02x", adc_read(ADC_VBE2));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_I_MICSUP1: %02x", adc_read(ADC_I_MICSUP1));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_I_MICSUP2: %02x", adc_read(ADC_I_MICSUP2));
+        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "ADC_VBAT: %02x", adc_read(ADC_VBAT));
+        lcd_puts(0, line++, buf);
 #endif
         lcd_update();
         if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
diff --git a/firmware/export/as3514.h b/firmware/export/as3514.h
index 0bf87dbc46..3261765f7f 100644
--- a/firmware/export/as3514.h
+++ b/firmware/export/as3514.h
@@ -20,6 +20,8 @@
 #ifndef _AS3514_H
 #define _AS3514_H
 
+#include <stdbool.h>
+
 extern int tenthdb2master(int db);
 extern int tenthdb2mixer(int db);
 
@@ -67,6 +69,13 @@ extern void audiohw_set_equalizer_band(int band, int freq, int bw, int gain);
 #define AUDIOSET3  0x16
 #define PLLMODE    0x1d
 
+#define IRQ_ENRD0  0x25
+#define IRQ_ENRD1  0x26
+#define IRQ_ENRD2  0x27
+
+#define ADC_0      0x2e
+#define ADC_1      0x2f
+
 /* Headphone volume goes from -45.43 - 1.07dB */
 #define VOLUME_MIN -454
 #define VOLUME_MAX 10
diff --git a/firmware/export/config-e200.h b/firmware/export/config-e200.h
index 1b3404a148..304c7062e5 100644
--- a/firmware/export/config-e200.h
+++ b/firmware/export/config-e200.h
@@ -88,7 +88,7 @@
 #define BATTERY_CAPACITY_MAX 750        /* max. capacity selectable */
 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 #define BATTERY_TYPES_COUNT  1          /* only one type */
-#define BATTERY_SCALE_FACTOR 5054
+#define BATTERY_SCALE_FACTOR 5005       /* ADC should read 0x3ff=5.12V */
 
 /* Hardware controlled charging? FIXME */
 #define CONFIG_CHARGING CHARGING_SIMPLE
diff --git a/firmware/target/arm/sandisk/sansa-e200/adc-e200.c b/firmware/target/arm/sandisk/sansa-e200/adc-e200.c
index b3206d68d1..5e57e4bec5 100644
--- a/firmware/target/arm/sandisk/sansa-e200/adc-e200.c
+++ b/firmware/target/arm/sandisk/sansa-e200/adc-e200.c
@@ -18,23 +18,25 @@
  ****************************************************************************/
 #include "adc.h"
 #include "i2c-pp.h"
-#include "logf.h"
+#include "as3514.h"
 
 /* Read 10-bit channel data */
 unsigned short adc_read(int channel)
 {
-    unsigned char bat[2];
+    unsigned char buf[2];
     unsigned short data = 0;
 
-    switch( channel)
-    {
-        case ADC_UNREG_POWER:
-            pp_i2c_send( 0x46, 0x2e, 0x0);
-            pp_i2c_send( 0x46, 0x27, 0x1);
-            i2c_readbytes( 0x46, 0x2e, 2, bat);
-            data = ((bat[0]<<8) | bat[1]);
-            break;
-    }
+    /* Select channel */
+    pp_i2c_send( AS3514_I2C_ADDR, ADC_0, (channel << 4));
+    
+    /* Wait for conversion to be complete */
+    pp_i2c_send( AS3514_I2C_ADDR, IRQ_ENRD2, 0x1);
+    while( (i2c_readbyte( AS3514_I2C_ADDR, IRQ_ENRD2) & 0x1) == 0);
+
+    /* Read data */
+    i2c_readbytes( AS3514_I2C_ADDR, ADC_0, 2, buf);
+    data = (((buf[0] & 0x3) << 8) | buf[1]);
+    
     return data;
 }
 
diff --git a/firmware/target/arm/sandisk/sansa-e200/adc-target.h b/firmware/target/arm/sandisk/sansa-e200/adc-target.h
index e9bff42a52..56efdf7574 100644
--- a/firmware/target/arm/sandisk/sansa-e200/adc-target.h
+++ b/firmware/target/arm/sandisk/sansa-e200/adc-target.h
@@ -19,9 +19,25 @@
 #ifndef _ADC_TARGET_H_
 #define _ADC_TARGET_H_
 
-#define NUM_ADC_CHANNELS 1
+/* ADC channels */
+#define NUM_ADC_CHANNELS 13
 
-#define ADC_BATTERY         0
-#define ADC_UNREG_POWER     ADC_BATTERY     /* For compatibility */
+#define ADC_BVDD         0  /* Battery voltage of 4V LiIo accumulator */
+#define ADC_RTCSUP       1  /* RTC backup battery voltage */
+#define ADC_UVDD         2  /* USB host voltage */
+#define ADC_CHG_IN       3  /* Charger input voltage */
+#define ADC_CVDD         4  /* Charger pump output voltage */
+#define ADC_BATTEMP      5  /* Battery charging temperature */
+#define ADC_MICSUP1      6  /* Voltage on MicSup1 for remote control
+                                or external voltage measurement */
+#define ADC_MICSUP2      7  /* Voltage on MicSup1 for remote control
+                                or external voltage measurement */
+#define ADC_VBE1         8  /* Measuring junction temperature @ 2uA */
+#define ADC_VBE2         9  /* Measuring junction temperature @ 1uA */
+#define ADC_I_MICSUP1    10 /* Current of MicSup1 for remote control detection */
+#define ADC_I_MICSUP2    11 /* Current of MicSup2 for remote control detection */
+#define ADC_VBAT         12 /* Single cell battery voltage */
+
+#define ADC_UNREG_POWER  ADC_BVDD   /* For compatibility */
 
 #endif