Correct the memory sizes (IRAM and DRAM) for the Nano2G.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22025 a1c6a512-1295-4272-9138-f99709370657

6 files changed, 152 insertions, 16 deletions

diff --git a/firmware/target/arm/s5l8700/boot.lds b/firmware/target/arm/s5l8700/boot.lds
index 28271822e8..12f03ef463 100644
--- a/firmware/target/arm/s5l8700/boot.lds
+++ b/firmware/target/arm/s5l8700/boot.lds
@@ -9,12 +9,16 @@ OUTPUT_FORMAT(elf32-bigarm)
 OUTPUT_ARCH(arm)
 STARTUP(target/arm/s5l8700/crt0.o)
 
-/* DRAMORIG is in fact 0x8000000 but remapped to 0x0 */
-#define DRAMORIG 0x8000000
-#define DRAMSIZE 16M
+/* DRAMORIG is in fact 0x08000000 but remapped to 0x0 */
+#define DRAMORIG 0x08000000
+#define DRAMSIZE (MEMORYSIZE * 0x100000)
 
 #define IRAMORIG 0x22000000
+#if CONFIG_CPU==S5L8701
+#define IRAMSIZE 176K
+#else
 #define IRAMSIZE 256K
+#endif
 
 #ifdef MEIZU_M6SL
 #define DFULOADADDR IRAMORIG
diff --git a/firmware/target/arm/s5l8700/crt0.S b/firmware/target/arm/s5l8700/crt0.S
index c6e201e73f..bb374ae5a4 100644
--- a/firmware/target/arm/s5l8700/crt0.S
+++ b/firmware/target/arm/s5l8700/crt0.S
@@ -82,6 +82,9 @@ newstart2:
 //    orr r0, r0, r2
 //    str r0, [r1] // switch backlight on
 
+#ifndef IPOD_NANO2G
+/* Currently disabled for the Nano2G as it doesn't appear to be
+   correct - e.g. audio doesn't work with this code enabled. */
     ldr r1, =0x3c500000 // CLKCON
     ldr r0, =0x00800080
     str r0, [r1]
@@ -90,7 +93,7 @@ newstart2:
     str r0, [r1]
     ldr r1, =0x3c500004 // PLL0PMS
 #ifdef IPOD_NANO2G
-    ldr r0, =0x21200
+    ldr r0, =0x21200    // pdiv=2, mdiv=?? sdiv=0
 #else
     ldr r0, =0x1ad200
 #endif
@@ -123,7 +126,8 @@ newstart2:
     nop					        
     nop
     nop
-
+#endif
+	
 //    ldr r0, =0x10100000
 //    ldr r1, =0x38200034
 //    str r0, [r1] // SRAM0/1 data width 16 bit
@@ -143,7 +147,7 @@ newstart2:
     str r0, [r1, #40] // enable clock for all peripherals
     mov r0, #0  // 0x0
     str r0, [r1, #44] // do not enter any power saving mode
-
+	
     mov r1, #0x1
     mrc 15, 0, r0, c1, c0, 0
     bic r0, r0, r1
@@ -186,7 +190,7 @@ newstart2:
     mcr 15, 0, r0, c6, c0, 1
     mov r0, #0x2f
     mcr 15, 0, r0, c6, c1, 1
-    ldr r0, =0x0800002f
+    ldr r0, =0x08000031
     mcr 15, 0, r0, c6, c2, 1
     ldr r0, =0x22000023
     mcr 15, 0, r0, c6, c3, 1
@@ -196,7 +200,7 @@ newstart2:
     mcr 15, 0, r0, c6, c0, 0
     mov r0, #0x2f
     mcr 15, 0, r0, c6, c1, 0
-    ldr r0, =0x0800002f
+    ldr r0, =0x08000031
     mcr 15, 0, r0, c6, c2, 0
     ldr r0, =0x22000023
     mcr 15, 0, r0, c6, c3, 0
diff --git a/firmware/target/arm/s5l8700/ipodnano2g/button-nano2g.c b/firmware/target/arm/s5l8700/ipodnano2g/button-nano2g.c
index 8049028a59..739b48b511 100644
--- a/firmware/target/arm/s5l8700/ipodnano2g/button-nano2g.c
+++ b/firmware/target/arm/s5l8700/ipodnano2g/button-nano2g.c
@@ -25,16 +25,58 @@
 #include "s5l8700.h"
 #include "button-target.h"
 
+#define CLICKWHEEL00      (*(volatile unsigned long*)(0x3c200000))
+#define CLICKWHEEL10      (*(volatile unsigned long*)(0x3c200010))
+#define CLICKWHEELINT     (*(volatile unsigned long*)(0x3c200014))
+#define CLICKWHEEL_DATA   (*(volatile unsigned long*)(0x3c200018))
+
+static int buttons = 0;
+
+void INT_SPI(void)
+{
+    int clickwheel_events;
+    int btn =0;
+    int status;
+
+    clickwheel_events = CLICKWHEELINT;
+
+    if (clickwheel_events & 4) CLICKWHEELINT = 4;
+    if (clickwheel_events & 2) CLICKWHEELINT = 2;
+    if (clickwheel_events & 1) CLICKWHEELINT = 1;
+
+    status = CLICKWHEEL_DATA;
+        if ((status & 0x800000ff) == 0x8000001a) 
+        {
+            if (status & 0x00000100)
+                btn |= BUTTON_SELECT;
+            if (status & 0x00000200)
+                btn |= BUTTON_RIGHT;
+            if (status & 0x00000400)
+                btn |= BUTTON_LEFT;
+            if (status & 0x00000800)
+                btn |= BUTTON_PLAY;
+            if (status & 0x00001000)
+                btn |= BUTTON_MENU;
+        }
+
+	buttons = btn;
+}
+
 void button_init_device(void)
 {
+    CLICKWHEEL00 = 0x280000;
+    CLICKWHEEL10 = 3;
+    INTMOD = 0;
+    INTMSK |= (1<<26);
+    PCON10 &= ~0xF00;
 }
 
 int button_read_device(void)
 {
+    return buttons;
 }
 
 bool button_hold(void)
 {
     return ((PDAT14 & (1 << 6)) == 0);
 }
-
diff --git a/firmware/target/arm/s5l8700/pcm-s5l8700.c b/firmware/target/arm/s5l8700/pcm-s5l8700.c
index 7a4bdeb174..9421956131 100644
--- a/firmware/target/arm/s5l8700/pcm-s5l8700.c
+++ b/firmware/target/arm/s5l8700/pcm-s5l8700.c
@@ -48,7 +48,11 @@ static const struct div_entry {
     int             pdiv, mdiv, sdiv, cdiv;
 } div_table[HW_NUM_FREQ] = {
     [HW_FREQ_11] = {  26,  189,    3,    8},
+#ifdef IPOD_NANO2G
+    [HW_FREQ_22] = {  5,   6,    3,    4},
+#else
     [HW_FREQ_22] = {  50,   98,    2,    8},
+#endif
     [HW_FREQ_44] = {  37,  151,    1,    9},
     [HW_FREQ_88] = {  50,   98,    1,    4},
 #if 0   /* disabled because the codec driver does not support it (yet) */
@@ -116,6 +120,17 @@ void pcm_play_dma_start(const void *addr, size_t size)
                       DMA_IISOUT_DSIZE, DMA_IISOUT_BLEN, (void *)addr, size / 2,
                       dma_callback);
 
+#ifdef IPOD_NANO2G
+    I2STXCON = (0x10 << 16) |  /* burst length */
+               (0 << 15) |  /* 0 = falling edge */
+               (0 << 13) |  /* 0 = basic I2S format */
+               (0 << 12) |  /* 0 = MSB first */
+               (0 << 11) |  /* 0 = left channel for low polarity */
+               (5 << 8) |   /* MCLK divider */
+               (0 << 5) |   /* 0 = 16-bit */
+               (2 << 3) |   /* bit clock per frame */
+               (1 << 0);    /* channel index */
+#else
     /* S2: IIS Tx mode set */
     I2STXCON = (DMA_IISOUT_BLEN << 16) |  /* burst length */
                (0 << 15) |  /* 0 = falling edge */
@@ -126,6 +141,7 @@ void pcm_play_dma_start(const void *addr, size_t size)
                (0 << 5) |   /* 0 = 16-bit */
                (0 << 3) |   /* bit clock per frame */
                (1 << 0);    /* channel index */
+#endif
     
     /* S3: DMA channel 0 on */
     dma_enable_channel(DMA_IISOUT_CHANNEL);
@@ -169,7 +185,12 @@ void pcm_play_dma_pause(bool pause)
 void pcm_play_dma_init(void)
 {
     /* configure IIS pins */
+#ifdef IPOD_NANO2G
+    PCON5 = (PCON5 & ~(0xFFFFF000)) | 0x22220000;
+    PCON6 = (PCON6 & ~(0x0F000000)) | 0x02000000;
+#else
     PCON7 = (PCON7 & ~(0x0FFFFF00)) | 0x02222200;
+#endif
 
     /* enable clock to the IIS module */
     PWRCON &= ~(1 << 6);
@@ -185,26 +206,42 @@ void pcm_postinit(void)
 /* set the configured PCM frequency */
 void pcm_dma_apply_settings(void)
 {
-    audiohw_set_frequency(pcm_sampr);
+  //    audiohw_set_frequency(pcm_sampr);
     
     struct div_entry div = div_table[pcm_fsel];
-    
+
+    PLLCON &= ~4;
+    PLLCON &= ~0x10;
+    PLLCON &= 0x3f;
+    PLLCON |= 4;
+
     /* configure PLL1 and MCLK for the desired sample rate */
+#ifdef IPOD_NANO2G
+    PLL1PMS = (2 << 16) | /* PDIV */
+              (12 << 8) | /* MDIV */
+              (2 << 0);   /* SDIV */
+    PLL1LCNT = 0x4d2;
+#else
     PLL1PMS = (div.pdiv << 16) |
               (div.mdiv << 8) |
               (div.sdiv << 0);
     PLL1LCNT = 7500;    /* no idea what to put here */
-    
+#endif
+
     /* enable PLL1 and wait for lock */
     PLLCON |= (1 << 1);
     while ((PLLLOCK & (1 << 1)) == 0);
 
     /* configure MCLK */
-    CLKCON = (CLKCON & ~(0xFF)) |
+    CLKCON = (CLKCON & ~(0xFF)) | 
              (0 << 7) |         /* MCLK_MASK */
-             (2 << 5) |         /* MCLK_SEL = PLL1 */
+             (2 << 5) |         /* MCLK_SEL = PLL2 */
              (1 << 4) |         /* MCLK_DIV_ON */
+#ifdef IPOD_NANO2G
+             (3 - 1);           /* MCLK_DIV_VAL */
+#else
              (div.cdiv - 1);    /* MCLK_DIV_VAL */
+#endif
 }
 
 size_t pcm_get_bytes_waiting(void)
diff --git a/firmware/target/arm/s5l8700/system-s5l8700.c b/firmware/target/arm/s5l8700/system-s5l8700.c
index 48c50645e9..a282c45235 100644
--- a/firmware/target/arm/s5l8700/system-s5l8700.c
+++ b/firmware/target/arm/s5l8700/system-s5l8700.c
@@ -96,12 +96,15 @@ void irq_handler(void)
                     "sub   sp, sp, #8           \n"); /* Reserve stack */
 
     int irq_no = INTOFFSET;
+    int sources = SRCPND;
+
+    if (irq_no==10) { INTMSK &= ~(1<<10); }
     
     irqvector[irq_no]();
 
     /* clear interrupt */
-    SRCPND = (1 << irq_no);
-    INTPND = INTPND;
+    SRCPND = sources;
+    INTPND = sources;
     
     asm volatile(   "add   sp, sp, #8           \n"   /* Cleanup stack   */
                     "ldmfd sp!, {r0-r7, ip, lr} \n"   /* Restore context */
diff --git a/firmware/target/arm/s5l8700/wmcodec-s5l8700.c b/firmware/target/arm/s5l8700/wmcodec-s5l8700.c
new file mode 100644
index 0000000000..3c7c24994d
--- /dev/null
+++ b/firmware/target/arm/s5l8700/wmcodec-s5l8700.c
@@ -0,0 +1,46 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * TCC specific code for Wolfson audio codecs
+ *
+ * Based on code from the ipodlinux project - http://ipodlinux.org/
+ * Adapted for Rockbox in December 2005
+ *
+ * Original file: linux/arch/armnommu/mach-ipod/audio.c
+ *
+ * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "system.h"
+#include "audiohw.h"
+#include "i2c-s5l8700.h"
+#include "wmcodec.h"
+
+void audiohw_init(void)
+{
+#if defined(HAVE_WM8731) || defined(HAVE_WM8751) || defined(HAVE_WM8985)
+    audiohw_preinit();
+#endif
+}
+
+void wmcodec_write(int reg, int data)
+{
+    unsigned char d = data & 0xff;
+    
+    i2c_write(0x34, (reg << 1) | ((data & 0x100) >> 8), 1, &d);
+}