1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
|
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mcb.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <uapi/linux/serial_core.h>
#define MEN_UART_ID_Z025 0x19
#define MEN_UART_ID_Z057 0x39
#define MEN_UART_ID_Z125 0x7d
#define MEN_UART_MEM_SIZE 0x10
struct serial_8250_men_mcb_data {
struct uart_8250_port uart;
int line;
};
/*
* The Z125 16550-compatible UART has no fixed base clock assigned
* So, depending on the board we're on, we need to adjust the
* parameter in order to really set the correct baudrate, and
* do so if possible without user interaction
*/
static u32 men_lookup_uartclk(struct mcb_device *mdev)
{
/* use default value if board is not available below */
u32 clkval = 1041666;
dev_info(&mdev->dev, "%s on board %s\n",
dev_name(&mdev->dev),
mdev->bus->name);
if (strncmp(mdev->bus->name, "F075", 4) == 0)
clkval = 1041666;
else if (strncmp(mdev->bus->name, "F216", 4) == 0)
clkval = 1843200;
else if (strncmp(mdev->bus->name, "G215", 4) == 0)
clkval = 1843200;
else if (strncmp(mdev->bus->name, "F210", 4) == 0)
clkval = 115200;
else
dev_info(&mdev->dev,
"board not detected, using default uartclk\n");
clkval = clkval << 4;
return clkval;
}
static unsigned int get_num_ports(struct mcb_device *mdev,
void __iomem *membase)
{
switch (mdev->id) {
case MEN_UART_ID_Z125:
return 1U;
case MEN_UART_ID_Z025:
return readb(membase) >> 4;
case MEN_UART_ID_Z057:
return 4U;
default:
dev_err(&mdev->dev, "no supported device!\n");
return -ENODEV;
}
}
static int serial_8250_men_mcb_probe(struct mcb_device *mdev,
const struct mcb_device_id *id)
{
struct serial_8250_men_mcb_data *data;
struct resource *mem;
unsigned int num_ports;
unsigned int i;
void __iomem *membase;
mem = mcb_get_resource(mdev, IORESOURCE_MEM);
if (mem == NULL)
return -ENXIO;
membase = devm_ioremap_resource(&mdev->dev, mem);
if (IS_ERR(membase))
return PTR_ERR_OR_ZERO(membase);
num_ports = get_num_ports(mdev, membase);
dev_dbg(&mdev->dev, "found a 16z%03u with %u ports\n",
mdev->id, num_ports);
if (num_ports == 0 || num_ports > 4) {
dev_err(&mdev->dev, "unexpected number of ports: %u\n",
num_ports);
return -ENODEV;
}
data = devm_kcalloc(&mdev->dev, num_ports,
sizeof(struct serial_8250_men_mcb_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
mcb_set_drvdata(mdev, data);
for (i = 0; i < num_ports; i++) {
data[i].uart.port.dev = mdev->dma_dev;
spin_lock_init(&data[i].uart.port.lock);
data[i].uart.port.type = PORT_16550;
data[i].uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ
| UPF_FIXED_TYPE;
data[i].uart.port.iotype = UPIO_MEM;
data[i].uart.port.uartclk = men_lookup_uartclk(mdev);
data[i].uart.port.regshift = 0;
data[i].uart.port.irq = mcb_get_irq(mdev);
data[i].uart.port.membase = membase;
data[i].uart.port.fifosize = 60;
data[i].uart.port.mapbase = (unsigned long) mem->start
+ i * MEN_UART_MEM_SIZE;
data[i].uart.port.iobase = data[i].uart.port.mapbase;
/* ok, register the port */
data[i].line = serial8250_register_8250_port(&data[i].uart);
if (data[i].line < 0) {
dev_err(&mdev->dev, "unable to register UART port\n");
return data[i].line;
}
dev_info(&mdev->dev, "found MCB UART: ttyS%d\n", data[i].line);
}
return 0;
}
static void serial_8250_men_mcb_remove(struct mcb_device *mdev)
{
unsigned int num_ports, i;
struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev);
if (!data)
return;
num_ports = get_num_ports(mdev, data[0].uart.port.membase);
if (num_ports < 0 || num_ports > 4) {
dev_err(&mdev->dev, "error retrieving number of ports!\n");
return;
}
for (i = 0; i < num_ports; i++)
serial8250_unregister_port(data[i].line);
}
static const struct mcb_device_id serial_8250_men_mcb_ids[] = {
{ .device = MEN_UART_ID_Z025 },
{ .device = MEN_UART_ID_Z057 },
{ .device = MEN_UART_ID_Z125 },
{ }
};
MODULE_DEVICE_TABLE(mcb, serial_8250_men_mcb_ids);
static struct mcb_driver mcb_driver = {
.driver = {
.name = "8250_men_mcb",
.owner = THIS_MODULE,
},
.probe = serial_8250_men_mcb_probe,
.remove = serial_8250_men_mcb_remove,
.id_table = serial_8250_men_mcb_ids,
};
module_mcb_driver(mcb_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MEN 8250 UART driver");
MODULE_AUTHOR("Michael Moese <michael.moese@men.de");
MODULE_ALIAS("mcb:16z125");
MODULE_ALIAS("mcb:16z025");
MODULE_ALIAS("mcb:16z057");
|
