1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
|
/* src/prism2/driver/prism2mgmt.c
*
* Management request handler functions.
*
* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
* --------------------------------------------------------------------
*
* linux-wlan
*
* The contents of this file are subject to the Mozilla Public
* License Version 1.1 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* Alternatively, the contents of this file may be used under the
* terms of the GNU Public License version 2 (the "GPL"), in which
* case the provisions of the GPL are applicable instead of the
* above. If you wish to allow the use of your version of this file
* only under the terms of the GPL and not to allow others to use
* your version of this file under the MPL, indicate your decision
* by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL. If you do not delete
* the provisions above, a recipient may use your version of this
* file under either the MPL or the GPL.
*
* --------------------------------------------------------------------
*
* Inquiries regarding the linux-wlan Open Source project can be
* made directly to:
*
* AbsoluteValue Systems Inc.
* info@linux-wlan.com
* http://www.linux-wlan.com
*
* --------------------------------------------------------------------
*
* Portions of the development of this software were funded by
* Intersil Corporation as part of PRISM(R) chipset product development.
*
* --------------------------------------------------------------------
*
* The functions in this file handle management requests sent from
* user mode.
*
* Most of these functions have two separate blocks of code that are
* conditional on whether this is a station or an AP. This is used
* to separate out the STA and AP responses to these management primitives.
* It's a choice (good, bad, indifferent?) to have the code in the same
* place so it's clear that the same primitive is implemented in both
* cases but has different behavior.
*
* --------------------------------------------------------------------
*/
#include <linux/if_arp.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/wireless.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/byteorder.h>
#include <linux/random.h>
#include <linux/usb.h>
#include <linux/bitops.h>
#include "p80211types.h"
#include "p80211hdr.h"
#include "p80211mgmt.h"
#include "p80211conv.h"
#include "p80211msg.h"
#include "p80211netdev.h"
#include "p80211metadef.h"
#include "p80211metastruct.h"
#include "hfa384x.h"
#include "prism2mgmt.h"
/* Converts 802.11 format rate specifications to prism2 */
#define p80211rate_to_p2bit(n) ((((n)&~BIT(7)) == 2) ? BIT(0) : \
(((n)&~BIT(7)) == 4) ? BIT(1) : \
(((n)&~BIT(7)) == 11) ? BIT(2) : \
(((n)&~BIT(7)) == 22) ? BIT(3) : 0)
/*----------------------------------------------------------------
* prism2mgmt_scan
*
* Initiate a scan for BSSs.
*
* This function corresponds to MLME-scan.request and part of
* MLME-scan.confirm. As far as I can tell in the standard, there
* are no restrictions on when a scan.request may be issued. We have
* to handle in whatever state the driver/MAC happen to be.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_dot11req_scan_t *msg = msgp;
u16 roamingmode, word;
int i, timeout;
int istmpenable = 0;
hfa384x_HostScanRequest_data_t scanreq;
/* gatekeeper check */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) <
HFA384x_FIRMWARE_VERSION(1, 3, 2)) {
printk(KERN_ERR
"HostScan not supported with current firmware (<1.3.2).\n");
result = 1;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto exit;
}
memset(&scanreq, 0, sizeof(scanreq));
/* save current roaming mode */
result = hfa384x_drvr_getconfig16(hw,
HFA384x_RID_CNFROAMINGMODE,
&roamingmode);
if (result) {
printk(KERN_ERR "getconfig(ROAMMODE) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* drop into mode 3 for the scan */
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFROAMINGMODE,
HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
if (result) {
printk(KERN_ERR "setconfig(ROAMINGMODE) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* active or passive? */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) >
HFA384x_FIRMWARE_VERSION(1, 5, 0)) {
if (msg->scantype.data != P80211ENUM_scantype_active)
word = cpu_to_le16(msg->maxchanneltime.data);
else
word = 0;
result =
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL,
word);
if (result) {
printk(KERN_WARNING "Passive scan not supported with "
"current firmware. (<1.5.1)\n");
}
}
/* set up the txrate to be 2MBPS. Should be fastest basicrate... */
word = HFA384x_RATEBIT_2;
scanreq.txRate = cpu_to_le16(word);
/* set up the channel list */
word = 0;
for (i = 0; i < msg->channellist.data.len; i++) {
u8 channel = msg->channellist.data.data[i];
if (channel > 14)
continue;
/* channel 1 is BIT 0 ... channel 14 is BIT 13 */
word |= (1 << (channel - 1));
}
scanreq.channelList = cpu_to_le16(word);
/* set up the ssid, if present. */
scanreq.ssid.len = cpu_to_le16(msg->ssid.data.len);
memcpy(scanreq.ssid.data, msg->ssid.data.data, msg->ssid.data.len);
/* Enable the MAC port if it's not already enabled */
result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_PORTSTATUS, &word);
if (result) {
printk(KERN_ERR "getconfig(PORTSTATUS) failed. "
"result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
if (word == HFA384x_PORTSTATUS_DISABLED) {
u16 wordbuf[17];
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFROAMINGMODE,
HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
if (result) {
printk(KERN_ERR
"setconfig(ROAMINGMODE) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* Construct a bogus SSID and assign it to OwnSSID and
* DesiredSSID
*/
wordbuf[0] = cpu_to_le16(WLAN_SSID_MAXLEN);
get_random_bytes(&wordbuf[1], WLAN_SSID_MAXLEN);
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
wordbuf,
HFA384x_RID_CNFOWNSSID_LEN);
if (result) {
printk(KERN_ERR "Failed to set OwnSSID.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
wordbuf,
HFA384x_RID_CNFDESIREDSSID_LEN);
if (result) {
printk(KERN_ERR "Failed to set DesiredSSID.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* bsstype */
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFPORTTYPE,
HFA384x_PORTTYPE_IBSS);
if (result) {
printk(KERN_ERR "Failed to set CNFPORTTYPE.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* ibss options */
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CREATEIBSS,
HFA384x_CREATEIBSS_JOINCREATEIBSS);
if (result) {
printk(KERN_ERR "Failed to set CREATEIBSS.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
result = hfa384x_drvr_enable(hw, 0);
if (result) {
printk(KERN_ERR "drvr_enable(0) failed. "
"result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
istmpenable = 1;
}
/* Figure out our timeout first Kus, then HZ */
timeout = msg->channellist.data.len * msg->maxchanneltime.data;
timeout = (timeout * HZ) / 1000;
/* Issue the scan request */
hw->scanflag = 0;
result = hfa384x_drvr_setconfig(hw,
HFA384x_RID_HOSTSCAN, &scanreq,
sizeof(hfa384x_HostScanRequest_data_t));
if (result) {
printk(KERN_ERR "setconfig(SCANREQUEST) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* sleep until info frame arrives */
wait_event_interruptible_timeout(hw->cmdq, hw->scanflag, timeout);
msg->numbss.status = P80211ENUM_msgitem_status_data_ok;
if (hw->scanflag == -1)
hw->scanflag = 0;
msg->numbss.data = hw->scanflag;
hw->scanflag = 0;
/* Disable port if we temporarily enabled it. */
if (istmpenable) {
result = hfa384x_drvr_disable(hw, 0);
if (result) {
printk(KERN_ERR "drvr_disable(0) failed. "
"result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
}
/* restore original roaming mode */
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE,
roamingmode);
if (result) {
printk(KERN_ERR "setconfig(ROAMMODE) failed. result=%d\n",
result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
goto exit;
}
result = 0;
msg->resultcode.data = P80211ENUM_resultcode_success;
exit:
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_scan_results
*
* Retrieve the BSS description for one of the BSSs identified in
* a scan.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
p80211msg_dot11req_scan_results_t *req;
hfa384x_t *hw = wlandev->priv;
hfa384x_HScanResultSub_t *item = NULL;
int count;
req = (p80211msg_dot11req_scan_results_t *) msgp;
req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
if (!hw->scanresults) {
printk(KERN_ERR
"dot11req_scan_results can only be used after a successful dot11req_scan.\n");
result = 2;
req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
goto exit;
}
count = (hw->scanresults->framelen - 3) / 32;
if (count > 32)
count = 32;
if (req->bssindex.data >= count) {
pr_debug("requested index (%d) out of range (%d)\n",
req->bssindex.data, count);
result = 2;
req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
goto exit;
}
item = &(hw->scanresults->info.hscanresult.result[req->bssindex.data]);
/* signal and noise */
req->signal.status = P80211ENUM_msgitem_status_data_ok;
req->noise.status = P80211ENUM_msgitem_status_data_ok;
req->signal.data = le16_to_cpu(item->sl);
req->noise.data = le16_to_cpu(item->anl);
/* BSSID */
req->bssid.status = P80211ENUM_msgitem_status_data_ok;
req->bssid.data.len = WLAN_BSSID_LEN;
memcpy(req->bssid.data.data, item->bssid, WLAN_BSSID_LEN);
/* SSID */
req->ssid.status = P80211ENUM_msgitem_status_data_ok;
req->ssid.data.len = le16_to_cpu(item->ssid.len);
memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len);
/* supported rates */
for (count = 0; count < 10; count++)
if (item->supprates[count] == 0)
break;
#define REQBASICRATE(N) \
if ((count >= N) && DOT11_RATE5_ISBASIC_GET(item->supprates[(N)-1])) { \
req->basicrate ## N .data = item->supprates[(N)-1]; \
req->basicrate ## N .status = P80211ENUM_msgitem_status_data_ok; \
}
REQBASICRATE(1);
REQBASICRATE(2);
REQBASICRATE(3);
REQBASICRATE(4);
REQBASICRATE(5);
REQBASICRATE(6);
REQBASICRATE(7);
REQBASICRATE(8);
#define REQSUPPRATE(N) \
if (count >= N) { \
req->supprate ## N .data = item->supprates[(N)-1]; \
req->supprate ## N .status = P80211ENUM_msgitem_status_data_ok; \
}
REQSUPPRATE(1);
REQSUPPRATE(2);
REQSUPPRATE(3);
REQSUPPRATE(4);
REQSUPPRATE(5);
REQSUPPRATE(6);
REQSUPPRATE(7);
REQSUPPRATE(8);
/* beacon period */
req->beaconperiod.status = P80211ENUM_msgitem_status_data_ok;
req->beaconperiod.data = le16_to_cpu(item->bcnint);
/* timestamps */
req->timestamp.status = P80211ENUM_msgitem_status_data_ok;
req->timestamp.data = jiffies;
req->localtime.status = P80211ENUM_msgitem_status_data_ok;
req->localtime.data = jiffies;
/* atim window */
req->ibssatimwindow.status = P80211ENUM_msgitem_status_data_ok;
req->ibssatimwindow.data = le16_to_cpu(item->atim);
/* Channel */
req->dschannel.status = P80211ENUM_msgitem_status_data_ok;
req->dschannel.data = le16_to_cpu(item->chid);
/* capinfo bits */
count = le16_to_cpu(item->capinfo);
/* privacy flag */
req->privacy.status = P80211ENUM_msgitem_status_data_ok;
req->privacy.data = WLAN_GET_MGMT_CAP_INFO_PRIVACY(count);
/* cfpollable */
req->cfpollable.status = P80211ENUM_msgitem_status_data_ok;
req->cfpollable.data = WLAN_GET_MGMT_CAP_INFO_CFPOLLABLE(count);
/* cfpollreq */
req->cfpollreq.status = P80211ENUM_msgitem_status_data_ok;
req->cfpollreq.data = WLAN_GET_MGMT_CAP_INFO_CFPOLLREQ(count);
/* bsstype */
req->bsstype.status = P80211ENUM_msgitem_status_data_ok;
req->bsstype.data = (WLAN_GET_MGMT_CAP_INFO_ESS(count)) ?
P80211ENUM_bsstype_infrastructure : P80211ENUM_bsstype_independent;
result = 0;
req->resultcode.data = P80211ENUM_resultcode_success;
exit:
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_start
*
* Start a BSS. Any station can do this for IBSS, only AP for ESS.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_dot11req_start_t *msg = msgp;
p80211pstrd_t *pstr;
u8 bytebuf[80];
hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t *) bytebuf;
u16 word;
wlandev->macmode = WLAN_MACMODE_NONE;
/* Set the SSID */
memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
/*** ADHOC IBSS ***/
/* see if current f/w is less than 8c3 */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) <
HFA384x_FIRMWARE_VERSION(0, 8, 3)) {
/* Ad-Hoc not quite supported on Prism2 */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto done;
}
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
/*** STATION ***/
/* Set the REQUIRED config items */
/* SSID */
pstr = (p80211pstrd_t *) &(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
if (result) {
printk(KERN_ERR "Failed to set CnfOwnSSID\n");
goto failed;
}
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
bytebuf,
HFA384x_RID_CNFDESIREDSSID_LEN);
if (result) {
printk(KERN_ERR "Failed to set CnfDesiredSSID\n");
goto failed;
}
/* bsstype - we use the default in the ap firmware */
/* IBSS port */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);
/* beacon period */
word = msg->beaconperiod.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNint, word);
if (result) {
printk(KERN_ERR "Failed to set beacon period=%d.\n", word);
goto failed;
}
/* dschannel */
word = msg->dschannel.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
if (result) {
printk(KERN_ERR "Failed to set channel=%d.\n", word);
goto failed;
}
/* Basic rates */
word = p80211rate_to_p2bit(msg->basicrate1.data);
if (msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate2.data);
if (msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate3.data);
if (msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate4.data);
if (msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate5.data);
if (msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate6.data);
if (msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate7.data);
if (msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate8.data);
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
if (result) {
printk(KERN_ERR "Failed to set basicrates=%d.\n", word);
goto failed;
}
/* Operational rates (supprates and txratecontrol) */
word = p80211rate_to_p2bit(msg->operationalrate1.data);
if (msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate2.data);
if (msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate3.data);
if (msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate4.data);
if (msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate5.data);
if (msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate6.data);
if (msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate7.data);
if (msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate8.data);
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
if (result) {
printk(KERN_ERR "Failed to set supprates=%d.\n", word);
goto failed;
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
if (result) {
printk(KERN_ERR "Failed to set txrates=%d.\n", word);
goto failed;
}
/* Set the macmode so the frame setup code knows what to do */
if (msg->bsstype.data == P80211ENUM_bsstype_independent) {
wlandev->macmode = WLAN_MACMODE_IBSS_STA;
/* lets extend the data length a bit */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
}
/* Enable the Port */
result = hfa384x_drvr_enable(hw, 0);
if (result) {
printk(KERN_ERR "Enable macport failed, result=%d.\n", result);
goto failed;
}
msg->resultcode.data = P80211ENUM_resultcode_success;
goto done;
failed:
pr_debug("Failed to set a config option, result=%d\n", result);
msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
done:
result = 0;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_readpda
*
* Collect the PDA data and put it in the message.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
----------------------------------------------------------------*/
int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
{
hfa384x_t *hw = wlandev->priv;
p80211msg_p2req_readpda_t *msg = msgp;
int result;
/* We only support collecting the PDA when in the FWLOAD
* state.
*/
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
printk(KERN_ERR
"PDA may only be read " "in the fwload state.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
} else {
/* Call drvr_readpda(), it handles the auxport enable
* and validating the returned PDA.
*/
result = hfa384x_drvr_readpda(hw,
msg->pda.data,
HFA384x_PDA_LEN_MAX);
if (result) {
printk(KERN_ERR
"hfa384x_drvr_readpda() failed, "
"result=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status =
P80211ENUM_msgitem_status_data_ok;
return 0;
}
msg->pda.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
}
return 0;
}
/*----------------------------------------------------------------
* prism2mgmt_ramdl_state
*
* Establishes the beginning/end of a card RAM download session.
*
* It is expected that the ramdl_write() function will be called
* one or more times between the 'enable' and 'disable' calls to
* this function.
*
* Note: This function should not be called when a mac comm port
* is active.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
----------------------------------------------------------------*/
int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
{
hfa384x_t *hw = wlandev->priv;
p80211msg_p2req_ramdl_state_t *msg = msgp;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
printk(KERN_ERR
"ramdl_state(): may only be called "
"in the fwload state.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return 0;
}
/*
** Note: Interrupts are locked out if this is an AP and are NOT
** locked out if this is a station.
*/
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
if (msg->enable.data == P80211ENUM_truth_true) {
if (hfa384x_drvr_ramdl_enable(hw, msg->exeaddr.data)) {
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
} else {
msg->resultcode.data = P80211ENUM_resultcode_success;
}
} else {
hfa384x_drvr_ramdl_disable(hw);
msg->resultcode.data = P80211ENUM_resultcode_success;
}
return 0;
}
/*----------------------------------------------------------------
* prism2mgmt_ramdl_write
*
* Writes a buffer to the card RAM using the download state. This
* is for writing code to card RAM. To just read or write raw data
* use the aux functions.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
----------------------------------------------------------------*/
int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp)
{
hfa384x_t *hw = wlandev->priv;
p80211msg_p2req_ramdl_write_t *msg = msgp;
u32 addr;
u32 len;
u8 *buf;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
printk(KERN_ERR
"ramdl_write(): may only be called "
"in the fwload state.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return 0;
}
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
/* first validate the length */
if (msg->len.data > sizeof(msg->data.data)) {
msg->resultcode.status =
P80211ENUM_resultcode_invalid_parameters;
return 0;
}
/* call the hfa384x function to do the write */
addr = msg->addr.data;
len = msg->len.data;
buf = msg->data.data;
if (hfa384x_drvr_ramdl_write(hw, addr, buf, len))
msg->resultcode.data = P80211ENUM_resultcode_refused;
msg->resultcode.data = P80211ENUM_resultcode_success;
return 0;
}
/*----------------------------------------------------------------
* prism2mgmt_flashdl_state
*
* Establishes the beginning/end of a card Flash download session.
*
* It is expected that the flashdl_write() function will be called
* one or more times between the 'enable' and 'disable' calls to
* this function.
*
* Note: This function should not be called when a mac comm port
* is active.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
----------------------------------------------------------------*/
int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_p2req_flashdl_state_t *msg = msgp;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
printk(KERN_ERR
"flashdl_state(): may only be called "
"in the fwload state.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return 0;
}
/*
** Note: Interrupts are locked out if this is an AP and are NOT
** locked out if this is a station.
*/
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
if (msg->enable.data == P80211ENUM_truth_true) {
if (hfa384x_drvr_flashdl_enable(hw)) {
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
} else {
msg->resultcode.data = P80211ENUM_resultcode_success;
}
} else {
hfa384x_drvr_flashdl_disable(hw);
msg->resultcode.data = P80211ENUM_resultcode_success;
/* NOTE: At this point, the MAC is in the post-reset
* state and the driver is in the fwload state.
* We need to get the MAC back into the fwload
* state. To do this, we set the nsdstate to HWPRESENT
* and then call the ifstate function to redo everything
* that got us into the fwload state.
*/
wlandev->msdstate = WLAN_MSD_HWPRESENT;
result = prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
if (result != P80211ENUM_resultcode_success) {
printk(KERN_ERR "prism2sta_ifstate(fwload) failed,"
"P80211ENUM_resultcode=%d\n", result);
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
result = -1;
}
}
return 0;
}
/*----------------------------------------------------------------
* prism2mgmt_flashdl_write
*
*
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
----------------------------------------------------------------*/
int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp)
{
hfa384x_t *hw = wlandev->priv;
p80211msg_p2req_flashdl_write_t *msg = msgp;
u32 addr;
u32 len;
u8 *buf;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
printk(KERN_ERR
"flashdl_write(): may only be called "
"in the fwload state.\n");
msg->resultcode.data =
P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return 0;
}
/*
** Note: Interrupts are locked out if this is an AP and are NOT
** locked out if this is a station.
*/
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
/* first validate the length */
if (msg->len.data > sizeof(msg->data.data)) {
msg->resultcode.status =
P80211ENUM_resultcode_invalid_parameters;
return 0;
}
/* call the hfa384x function to do the write */
addr = msg->addr.data;
len = msg->len.data;
buf = msg->data.data;
if (hfa384x_drvr_flashdl_write(hw, addr, buf, len))
msg->resultcode.data = P80211ENUM_resultcode_refused;
msg->resultcode.data = P80211ENUM_resultcode_success;
return 0;
}
/*----------------------------------------------------------------
* prism2mgmt_autojoin
*
* Associate with an ESS.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
{
hfa384x_t *hw = wlandev->priv;
int result = 0;
u16 reg;
u16 port_type;
p80211msg_lnxreq_autojoin_t *msg = msgp;
p80211pstrd_t *pstr;
u8 bytebuf[256];
hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t *) bytebuf;
wlandev->macmode = WLAN_MACMODE_NONE;
/* Set the SSID */
memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
/* Disable the Port */
hfa384x_drvr_disable(hw, 0);
/*** STATION ***/
/* Set the TxRates */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, 0x000f);
/* Set the auth type */
if (msg->authtype.data == P80211ENUM_authalg_sharedkey)
reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
else
reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
/* Set the ssid */
memset(bytebuf, 0, 256);
pstr = (p80211pstrd_t *) &(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
bytebuf,
HFA384x_RID_CNFDESIREDSSID_LEN);
port_type = HFA384x_PORTTYPE_BSS;
/* Set the PortType */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, port_type);
/* Enable the Port */
hfa384x_drvr_enable(hw, 0);
/* Set the resultcode */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
return result;
}
/*----------------------------------------------------------------
* prism2mgmt_wlansniff
*
* Start or stop sniffing.
*
* Arguments:
* wlandev wlan device structure
* msgp ptr to msg buffer
*
* Returns:
* 0 success and done
* <0 success, but we're waiting for something to finish.
* >0 an error occurred while handling the message.
* Side effects:
*
* Call context:
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
p80211msg_lnxreq_wlansniff_t *msg = msgp;
hfa384x_t *hw = wlandev->priv;
u16 word;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
switch (msg->enable.data) {
case P80211ENUM_truth_false:
/* Confirm that we're in monitor mode */
if (wlandev->netdev->type == ARPHRD_ETHER) {
msg->resultcode.data =
P80211ENUM_resultcode_invalid_parameters;
result = 0;
goto exit;
}
/* Disable monitor mode */
result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_DISABLE);
if (result) {
pr_debug("failed to disable monitor mode, result=%d\n",
result);
goto failed;
}
/* Disable port 0 */
result = hfa384x_drvr_disable(hw, 0);
if (result) {
pr_debug
("failed to disable port 0 after sniffing, result=%d\n",
result);
goto failed;
}
/* Clear the driver state */
wlandev->netdev->type = ARPHRD_ETHER;
/* Restore the wepflags */
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFWEPFLAGS,
hw->presniff_wepflags);
if (result) {
pr_debug
("failed to restore wepflags=0x%04x, result=%d\n",
hw->presniff_wepflags, result);
goto failed;
}
/* Set the port to its prior type and enable (if necessary) */
if (hw->presniff_port_type != 0) {
word = hw->presniff_port_type;
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFPORTTYPE,
word);
if (result) {
pr_debug
("failed to restore porttype, result=%d\n",
result);
goto failed;
}
/* Enable the port */
result = hfa384x_drvr_enable(hw, 0);
if (result) {
pr_debug
("failed to enable port to presniff setting, result=%d\n",
result);
goto failed;
}
} else {
result = hfa384x_drvr_disable(hw, 0);
}
printk(KERN_INFO "monitor mode disabled\n");
msg->resultcode.data = P80211ENUM_resultcode_success;
result = 0;
goto exit;
break;
case P80211ENUM_truth_true:
/* Disable the port (if enabled), only check Port 0 */
if (hw->port_enabled[0]) {
if (wlandev->netdev->type == ARPHRD_ETHER) {
/* Save macport 0 state */
result = hfa384x_drvr_getconfig16(hw,
HFA384x_RID_CNFPORTTYPE,
&(hw->presniff_port_type));
if (result) {
pr_debug
("failed to read porttype, result=%d\n",
result);
goto failed;
}
/* Save the wepflags state */
result = hfa384x_drvr_getconfig16(hw,
HFA384x_RID_CNFWEPFLAGS,
&(hw->presniff_wepflags));
if (result) {
pr_debug
("failed to read wepflags, result=%d\n",
result);
goto failed;
}
hfa384x_drvr_stop(hw);
result = hfa384x_drvr_start(hw);
if (result) {
pr_debug
("failed to restart the card for sniffing, result=%d\n",
result);
goto failed;
}
} else {
/* Disable the port */
result = hfa384x_drvr_disable(hw, 0);
if (result) {
pr_debug
("failed to enable port for sniffing, result=%d\n",
result);
goto failed;
}
}
} else {
hw->presniff_port_type = 0;
}
/* Set the channel we wish to sniff */
word = msg->channel.data;
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFOWNCHANNEL,
word);
hw->sniff_channel = word;
if (result) {
pr_debug("failed to set channel %d, result=%d\n",
word, result);
goto failed;
}
/* Now if we're already sniffing, we can skip the rest */
if (wlandev->netdev->type != ARPHRD_ETHER) {
/* Set the port type to pIbss */
word = HFA384x_PORTTYPE_PSUEDOIBSS;
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFPORTTYPE,
word);
if (result) {
pr_debug
("failed to set porttype %d, result=%d\n",
word, result);
goto failed;
}
if ((msg->keepwepflags.status ==
P80211ENUM_msgitem_status_data_ok)
&& (msg->keepwepflags.data !=
P80211ENUM_truth_true)) {
/* Set the wepflags for no decryption */
word = HFA384x_WEPFLAGS_DISABLE_TXCRYPT |
HFA384x_WEPFLAGS_DISABLE_RXCRYPT;
result =
hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFWEPFLAGS,
word);
}
if (result) {
pr_debug
("failed to set wepflags=0x%04x, result=%d\n",
word, result);
goto failed;
}
}
/* Do we want to strip the FCS in monitor mode? */
if ((msg->stripfcs.status == P80211ENUM_msgitem_status_data_ok)
&& (msg->stripfcs.data == P80211ENUM_truth_true)) {
hw->sniff_fcs = 0;
} else {
hw->sniff_fcs = 1;
}
/* Do we want to truncate the packets? */
if (msg->packet_trunc.status ==
P80211ENUM_msgitem_status_data_ok) {
hw->sniff_truncate = msg->packet_trunc.data;
} else {
hw->sniff_truncate = 0;
}
/* Enable the port */
result = hfa384x_drvr_enable(hw, 0);
if (result) {
pr_debug
("failed to enable port for sniffing, result=%d\n",
result);
goto failed;
}
/* Enable monitor mode */
result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_ENABLE);
if (result) {
pr_debug("failed to enable monitor mode, result=%d\n",
result);
goto failed;
}
if (wlandev->netdev->type == ARPHRD_ETHER)
printk(KERN_INFO "monitor mode enabled\n");
/* Set the driver state */
/* Do we want the prism2 header? */
if ((msg->prismheader.status ==
P80211ENUM_msgitem_status_data_ok)
&& (msg->prismheader.data == P80211ENUM_truth_true)) {
hw->sniffhdr = 0;
wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
} else
if ((msg->wlanheader.status ==
P80211ENUM_msgitem_status_data_ok)
&& (msg->wlanheader.data == P80211ENUM_truth_true)) {
hw->sniffhdr = 1;
wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
} else {
wlandev->netdev->type = ARPHRD_IEEE80211;
}
msg->resultcode.data = P80211ENUM_resultcode_success;
result = 0;
goto exit;
break;
default:
msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
result = 0;
goto exit;
break;
}
failed:
msg->resultcode.data = P80211ENUM_resultcode_refused;
result = 0;
exit:
return result;
}
|