1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
|
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include "spk_types.h"
#include "speakup.h"
#include "spk_priv.h"
#include "serialio.h"
#ifndef SERIAL_PORT_DFNS
#define SERIAL_PORT_DFNS
#endif
static void start_serial_interrupt(int irq);
static const struct old_serial_port rs_table[] = {
SERIAL_PORT_DFNS
};
static const struct old_serial_port *serstate;
static int timeouts;
const struct old_serial_port *spk_serial_init(int index)
{
int baud = 9600, quot = 0;
unsigned int cval = 0;
int cflag = CREAD | HUPCL | CLOCAL | B9600 | CS8;
const struct old_serial_port *ser = rs_table + index;
int err;
/* Divisor, bytesize and parity */
quot = ser->baud_base / baud;
cval = cflag & (CSIZE | CSTOPB);
#if defined(__powerpc__) || defined(__alpha__)
cval >>= 8;
#else /* !__powerpc__ && !__alpha__ */
cval >>= 4;
#endif /* !__powerpc__ && !__alpha__ */
if (cflag & PARENB)
cval |= UART_LCR_PARITY;
if (!(cflag & PARODD))
cval |= UART_LCR_EPAR;
if (synth_request_region(ser->port, 8)) {
/* try to take it back. */
pr_info("Ports not available, trying to steal them\n");
__release_region(&ioport_resource, ser->port, 8);
err = synth_request_region(ser->port, 8);
if (err) {
pr_warn("Unable to allocate port at %x, errno %i",
ser->port, err);
return NULL;
}
}
/* Disable UART interrupts, set DTR and RTS high
* and set speed. */
outb(cval | UART_LCR_DLAB, ser->port + UART_LCR); /* set DLAB */
outb(quot & 0xff, ser->port + UART_DLL); /* LS of divisor */
outb(quot >> 8, ser->port + UART_DLM); /* MS of divisor */
outb(cval, ser->port + UART_LCR); /* reset DLAB */
/* Turn off Interrupts */
outb(0, ser->port + UART_IER);
outb(UART_MCR_DTR | UART_MCR_RTS, ser->port + UART_MCR);
/* If we read 0xff from the LSR, there is no UART here. */
if (inb(ser->port + UART_LSR) == 0xff) {
synth_release_region(ser->port, 8);
serstate = NULL;
return NULL;
}
mdelay(1);
speakup_info.port_tts = ser->port;
serstate = ser;
start_serial_interrupt(ser->irq);
return ser;
}
static irqreturn_t synth_readbuf_handler(int irq, void *dev_id)
{
unsigned long flags;
/*printk(KERN_ERR "in irq\n"); */
/*pr_warn("in IRQ\n"); */
int c;
spin_lock_irqsave(&speakup_info.spinlock, flags);
while (inb_p(speakup_info.port_tts + UART_LSR) & UART_LSR_DR) {
c = inb_p(speakup_info.port_tts+UART_RX);
synth->read_buff_add((u_char) c);
/*printk(KERN_ERR "c = %d\n", c); */
/*pr_warn("C = %d\n", c); */
}
spin_unlock_irqrestore(&speakup_info.spinlock, flags);
return IRQ_HANDLED;
}
static void start_serial_interrupt(int irq)
{
int rv;
if (synth->read_buff_add == NULL)
return;
rv = request_irq(irq, synth_readbuf_handler, IRQF_SHARED,
"serial", (void *) synth_readbuf_handler);
if (rv)
pr_err("Unable to request Speakup serial I R Q\n");
/* Set MCR */
outb(UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2,
speakup_info.port_tts + UART_MCR);
/* Turn on Interrupts */
outb(UART_IER_MSI|UART_IER_RLSI|UART_IER_RDI,
speakup_info.port_tts + UART_IER);
inb(speakup_info.port_tts+UART_LSR);
inb(speakup_info.port_tts+UART_RX);
inb(speakup_info.port_tts+UART_IIR);
inb(speakup_info.port_tts+UART_MSR);
outb(1, speakup_info.port_tts + UART_FCR); /* Turn FIFO On */
}
void spk_stop_serial_interrupt(void)
{
if (speakup_info.port_tts == 0)
return;
if (synth->read_buff_add == NULL)
return;
/* Turn off interrupts */
outb(0, speakup_info.port_tts+UART_IER);
/* Free IRQ */
free_irq(serstate->irq, (void *) synth_readbuf_handler);
}
int spk_wait_for_xmitr(void)
{
int tmout = SPK_XMITR_TIMEOUT;
if ((synth->alive) && (timeouts >= NUM_DISABLE_TIMEOUTS)) {
pr_warn("%s: too many timeouts, deactivating speakup\n",
synth->long_name);
synth->alive = 0;
/* No synth any more, so nobody will restart TTYs, and we thus
* need to do it ourselves. Now that there is no synth we can
* let application flood anyway */
speakup_start_ttys();
timeouts = 0;
return 0;
}
while (spk_serial_tx_busy()) {
if (--tmout == 0) {
pr_warn("%s: timed out (tx busy)\n", synth->long_name);
timeouts++;
return 0;
}
udelay(1);
}
tmout = SPK_CTS_TIMEOUT;
while (!((inb_p(speakup_info.port_tts + UART_MSR)) & UART_MSR_CTS)) {
/* CTS */
if (--tmout == 0) {
/* pr_warn("%s: timed out (cts)\n",
* synth->long_name); */
timeouts++;
return 0;
}
udelay(1);
}
timeouts = 0;
return 1;
}
unsigned char spk_serial_in(void)
{
int tmout = SPK_SERIAL_TIMEOUT;
while (!(inb_p(speakup_info.port_tts + UART_LSR) & UART_LSR_DR)) {
if (--tmout == 0) {
pr_warn("time out while waiting for input.\n");
return 0xff;
}
udelay(1);
}
return inb_p(speakup_info.port_tts + UART_RX);
}
EXPORT_SYMBOL_GPL(spk_serial_in);
unsigned char spk_serial_in_nowait(void)
{
unsigned char lsr;
lsr = inb_p(speakup_info.port_tts + UART_LSR);
if (!(lsr & UART_LSR_DR))
return 0;
return inb_p(speakup_info.port_tts + UART_RX);
}
EXPORT_SYMBOL_GPL(spk_serial_in_nowait);
int spk_serial_out(const char ch)
{
if (synth->alive && spk_wait_for_xmitr()) {
outb_p(ch, speakup_info.port_tts);
return 1;
}
return 0;
}
EXPORT_SYMBOL_GPL(spk_serial_out);
void spk_serial_release(void)
{
if (speakup_info.port_tts == 0)
return;
synth_release_region(speakup_info.port_tts, 8);
speakup_info.port_tts = 0;
}
EXPORT_SYMBOL_GPL(spk_serial_release);
|
