1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
/*
* SBE 2T3E3 synchronous serial card driver for Linux
*
* Copyright (C) 2009-2010 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* This code is based on a driver written by SBE Inc.
*/
#ifndef CTRL_H
#define CTRL_H
#define SBE_2T3E3_OFF 0
#define SBE_2T3E3_ON 1
#define SBE_2T3E3_LED_NONE 0
#define SBE_2T3E3_LED_GREEN 1
#define SBE_2T3E3_LED_YELLOW 2
#define SBE_2T3E3_CABLE_LENGTH_LESS_THAN_255_FEET 0
#define SBE_2T3E3_CABLE_LENGTH_GREATER_THAN_255_FEET 1
#define SBE_2T3E3_CRC_16 0
#define SBE_2T3E3_CRC_32 1
#define SBE_2T3E3_PANEL_FRONT 0
#define SBE_2T3E3_PANEL_REAR 1
#define SBE_2T3E3_FRAME_MODE_HDLC 0
#define SBE_2T3E3_FRAME_MODE_TRANSPARENT 1
#define SBE_2T3E3_FRAME_MODE_RAW 2
#define SBE_2T3E3_FRAME_TYPE_E3_G751 0
#define SBE_2T3E3_FRAME_TYPE_E3_G832 1
#define SBE_2T3E3_FRAME_TYPE_T3_CBIT 2
#define SBE_2T3E3_FRAME_TYPE_T3_M13 3
#define SBE_2T3E3_FRACTIONAL_MODE_NONE 0
#define SBE_2T3E3_FRACTIONAL_MODE_0 1
#define SBE_2T3E3_FRACTIONAL_MODE_1 2
#define SBE_2T3E3_FRACTIONAL_MODE_2 3
#define SBE_2T3E3_SCRAMBLER_OFF 0
#define SBE_2T3E3_SCRAMBLER_LARSCOM 1
#define SBE_2T3E3_SCRAMBLER_ADC_KENTROX_DIGITAL 2
#define SBE_2T3E3_TIMING_LOCAL 0
#define SBE_2T3E3_TIMING_LOOP 1
#define SBE_2T3E3_LOOPBACK_NONE 0
#define SBE_2T3E3_LOOPBACK_ETHERNET 1
#define SBE_2T3E3_LOOPBACK_FRAMER 2
#define SBE_2T3E3_LOOPBACK_LIU_DIGITAL 3
#define SBE_2T3E3_LOOPBACK_LIU_ANALOG 4
#define SBE_2T3E3_LOOPBACK_LIU_REMOTE 5
#define SBE_2T3E3_PAD_COUNT_1 1
#define SBE_2T3E3_PAD_COUNT_2 2
#define SBE_2T3E3_PAD_COUNT_3 3
#define SBE_2T3E3_PAD_COUNT_4 4
#define SBE_2T3E3_CHIP_21143 0
#define SBE_2T3E3_CHIP_CPLD 1
#define SBE_2T3E3_CHIP_FRAMER 2
#define SBE_2T3E3_CHIP_LIU 3
#define SBE_2T3E3_LOG_LEVEL_NONE 0
#define SBE_2T3E3_LOG_LEVEL_ERROR 1
#define SBE_2T3E3_LOG_LEVEL_WARNING 2
#define SBE_2T3E3_LOG_LEVEL_INFO 3
/* commands */
#define SBE_2T3E3_PORT_GET 0
#define SBE_2T3E3_PORT_SET 1
#define SBE_2T3E3_PORT_GET_STATS 2
#define SBE_2T3E3_PORT_DEL_STATS 3
#define SBE_2T3E3_PORT_READ_REGS 4
#define SBE_2T3E3_LOG_LEVEL 5
#define SBE_2T3E3_PORT_WRITE_REGS 6
#define NG_SBE_2T3E3_NODE_TYPE "sbe2T3E3"
#define NG_SBE_2T3E3_COOKIE 0x03800891
struct t3e3_param {
u_int8_t frame_mode; /* FRAME_MODE_* */
u_int8_t crc; /* CRC_* */
u_int8_t receiver_on; /* ON/OFF */
u_int8_t transmitter_on; /* ON/OFF */
u_int8_t frame_type; /* FRAME_TYPE_* */
u_int8_t panel; /* PANEL_* */
u_int8_t line_build_out; /* ON/OFF */
u_int8_t receive_equalization; /* ON/OFF */
u_int8_t transmit_all_ones; /* ON/OFF */
u_int8_t loopback; /* LOOPBACK_* */
u_int8_t clock_source; /* TIMING_* */
u_int8_t scrambler; /* SCRAMBLER_* */
u_int8_t pad_count; /* PAD_COUNT_* */
u_int8_t log_level; /* LOG_LEVEL_* - unused */
u_int8_t fractional_mode; /* FRACTIONAL_MODE_* */
u_int8_t bandwidth_start; /* 0-255 */
u_int8_t bandwidth_stop; /* 0-255 */
};
struct t3e3_stats {
u_int64_t in_bytes;
u32 in_packets, in_dropped;
u32 in_errors, in_error_desc, in_error_coll, in_error_drib,
in_error_crc, in_error_mii;
u_int64_t out_bytes;
u32 out_packets, out_dropped;
u32 out_errors, out_error_jab, out_error_lost_carr,
out_error_no_carr, out_error_link_fail, out_error_underflow,
out_error_dereferred;
u_int8_t LOC, LOF, OOF, LOS, AIS, FERF, IDLE, AIC, FEAC;
u_int16_t FEBE_code;
u32 LCV, FRAMING_BIT, PARITY_ERROR, FEBE_count, CP_BIT;
};
struct t3e3_resp {
union {
struct t3e3_param param;
struct t3e3_stats stats;
u32 data;
} u;
};
#endif /* CTRL_H */
|
