path: root/drivers/staging/bcm/Ioctl.h

#ifndef _IOCTL_H_
#define _IOCTL_H_

typedef struct rdmbuffer
{
	ULONG	Register;
	ULONG	Length;
}__attribute__((packed)) RDM_BUFFER, *PRDM_BUFFER;


typedef struct wrmbuffer
{
	ULONG	Register;
	ULONG	Length;
	UCHAR	Data[4];
}__attribute__((packed)) WRM_BUFFER, *PWRM_BUFFER;


typedef struct ioctlbuffer
{
	void __user *InputBuffer;
	ULONG	InputLength;
	void __user *OutputBuffer;
	ULONG	OutputLength;
}__attribute__((packed)) IOCTL_BUFFER, *PIOCTL_BUFFER;

typedef struct stGPIOInfo
{
	UINT  uiGpioNumber ; /* valid numbers 0-15 */
	UINT uiGpioValue; /* 1 set ; 0 not  set */
}__attribute__((packed))GPIO_INFO,*PGPIO_INFO;
typedef struct stUserThreadReq
{
	//0->Inactivate LED thread.
	//1->Activate the LED thread
	UINT ThreadState;
}__attribute__((packed))USER_THREAD_REQ,*PUSER_THREAD_REQ;
#define LED_THREAD_ACTIVATION_REQ  1


////********** ioctl codes ***********////

#define BCM_IOCTL 				'k'

//1.Control code for CONTROL MESSAGES

#define IOCTL_SEND_CONTROL_MESSAGE 			_IOW(BCM_IOCTL,	0x801,int)

//2.Control code to write a particular value to a particular register
#define IOCTL_BCM_REGISTER_WRITE            _IOW(BCM_IOCTL, 0x802, int) //

//3.
#define IOCTL_BCM_REGISTER_READ             _IOR(BCM_IOCTL, 0x803, int) //

//4.Control code to write x number of bytes to common memory
//starting from address y
#define IOCTL_BCM_COMMON_MEMORY_WRITE  	    _IOW(BCM_IOCTL, 0x804, int)//

//5.Control code to write x number of bytes to common memory
//starting from address y
#define IOCTL_BCM_COMMON_MEMORY_READ 	    _IOR(BCM_IOCTL, 0x805, int)//

//6.Control code for CONTROL MESSAGES
#define IOCTL_GET_CONTROL_MESSAGE 			_IOR(BCM_IOCTL,	0x806, int)//

//7.Control code for FIRMWARE DOWNLOAD
#define IOCTL_BCM_FIRMWARE_DOWNLOAD 		_IOW(BCM_IOCTL, 0x807, int)//

#define IOCTL_BCM_SET_SEND_VCID 	        _IOW(BCM_IOCTL,	0x808, int)

//9.Control code for TRANSFER MODE SWITCHING
#define IOCTL_BCM_SWITCH_TRANSFER_MODE 		_IOW(BCM_IOCTL, 0x809, int)
//10.Control code for LINK UP
#define IOCTL_LINK_REQ 						_IOW(BCM_IOCTL, 0x80A, int)

//11.Control code for RSSI Level Request
#define IOCTL_RSSI_LEVEL_REQ				_IOW(BCM_IOCTL, 0x80B, int)
//12.Control code for IDLE MODE CONTROL
#define IOCTL_IDLE_REQ						_IOW(BCM_IOCTL, 0x80C, int)
//13.Control code for SS/BS info
#define IOCTL_SS_INFO_REQ					_IOW(BCM_IOCTL, 0x80D, int)

#define IOCTL_GET_STATISTICS_POINTER		_IOW(BCM_IOCTL, 0x80E, int)

#define IOCTL_CM_REQUEST    				_IOW(BCM_IOCTL, 0x80F, int)

#define IOCTL_INIT_PARAM_REQ 				_IOW(BCM_IOCTL, 0x810, int)

#define IOCTL_MAC_ADDR_REQ				_IOW(BCM_IOCTL, 0x811, int)

#define IOCTL_MAC_ADDR_RESP				_IOWR(BCM_IOCTL, 0x812, int)

#define IOCTL_CLASSIFICATION_RULE	  	_IOW(BCM_IOCTL, 0x813, char)

#define IOCTL_CLOSE_NOTIFICATION		_IO(BCM_IOCTL, 0x814)

#define IOCTL_LINK_UP					_IO(BCM_IOCTL, 0x815)

#define IOCTL_LINK_DOWN					_IO(BCM_IOCTL, 0x816, IOCTL_BUFFER)

#define IOCTL_CHIP_RESET                _IO(BCM_IOCTL, 0x816)

#define IOCTL_CINR_LEVEL_REQ			_IOW(BCM_IOCTL, 0x817, char)

#define IOCTL_WTM_CONTROL_REQ			_IOW(BCM_IOCTL, 0x817,char)

#define IOCTL_BE_BUCKET_SIZE			_IOW(BCM_IOCTL, 0x818, unsigned long)

#define IOCTL_RTPS_BUCKET_SIZE			_IOW(BCM_IOCTL, 0x819, unsigned long)

#define IOCTL_QOS_THRESHOLD				_IOW(BCM_IOCTL, 0x820, unsigned long)

#define IOCTL_DUMP_PACKET_INFO				_IO(BCM_IOCTL, 0x821)

#define IOCTL_GET_PACK_INFO					_IOR(BCM_IOCTL, 0x823, int)

#define IOCTL_BCM_GET_DRIVER_VERSION		_IOR(BCM_IOCTL, 0x829, int)

#define IOCTL_BCM_GET_CURRENT_STATUS 		_IOW(BCM_IOCTL, 0x828, int)

#define IOCTL_BCM_GPIO_SET_REQUEST	  		_IOW(BCM_IOCTL, 0x82A, int)

#define IOCTL_BCM_GPIO_STATUS_REQUEST 		_IOW(BCM_IOCTL, 0x82b, int)

#define IOCTL_BCM_GET_DSX_INDICATION 		_IOR(BCM_IOCTL, 0x854, int)

#define IOCTL_BCM_BUFFER_DOWNLOAD_START 	_IOW(BCM_IOCTL, 0x855, int)

#define IOCTL_BCM_BUFFER_DOWNLOAD 			_IOW(BCM_IOCTL, 0x856, int)

#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP 		_IOW(BCM_IOCTL, 0x857, int)

#define IOCTL_BCM_REGISTER_WRITE_PRIVATE 	_IOW(BCM_IOCTL, 0x826, char)

#define IOCTL_BCM_REGISTER_READ_PRIVATE		_IOW(BCM_IOCTL, 0x827, char)

#define IOCTL_BCM_SET_DEBUG                 _IOW(BCM_IOCTL, 0x824, IOCTL_BUFFER)

#define IOCTL_BCM_EEPROM_REGISTER_WRITE  	_IOW(BCM_IOCTL, 0x858, int)

#define IOCTL_BCM_EEPROM_REGISTER_READ     	_IOR(BCM_IOCTL, 0x859, int)

#define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE	_IOR(BCM_IOCTL, 0x860, int)

#define IOCTL_BCM_SET_MAC_TRACING     		_IOW(BCM_IOCTL, 0x82c, int)

#define IOCTL_BCM_GET_HOST_MIBS 		  	_IOW(BCM_IOCTL, 0x853, int)

#define IOCTL_BCM_NVM_READ 					_IOR(BCM_IOCTL, 0x861, int)

#define IOCTL_BCM_NVM_WRITE					_IOW(BCM_IOCTL, 0x862, int)

#define IOCTL_BCM_GET_NVM_SIZE				_IOR(BCM_IOCTL, 0x863, int)

#define IOCTL_BCM_CAL_INIT					_IOR(BCM_IOCTL, 0x864, int)

#define IOCTL_BCM_BULK_WRM 					_IOW(BCM_IOCTL, 0x90B, int)

#define IOCTL_BCM_FLASH2X_SECTION_READ 		_IOR(BCM_IOCTL, 0x865, int)

#define IOCTL_BCM_FLASH2X_SECTION_WRITE		_IOW(BCM_IOCTL, 0x866, int)

#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL,0x867, int)

#define IOCTL_BCM_SET_ACTIVE_SECTION 		_IOW(BCM_IOCTL,0x868, int)

#define	IOCTL_BCM_IDENTIFY_ACTIVE_SECTION 	_IO(BCM_IOCTL,0x869)

#define IOCTL_BCM_COPY_SECTION 				_IOW(BCM_IOCTL, 0x870,int)

#define	IOCTL_BCM_GET_FLASH_CS_INFO 		_IOR(BCM_IOCTL, 0x871, int)

#define IOCTL_BCM_SELECT_DSD 				_IOW(BCM_IOCTL, 0x872, int)

#define IOCTL_BCM_NVM_RAW_READ  			_IOR(BCM_IOCTL, 0x875, int)

#define IOCTL_BCM_CNTRLMSG_MASK  			_IOW(BCM_IOCTL, 0x874, int)

#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO  _IOR(BCM_IOCTL, 0x877, int)

#define IOCTL_BCM_TIME_SINCE_NET_ENTRY  _IOR(BCM_IOCTL, 0x876, int)

#define BCM_LED_THREAD_STATE_CHANGE_REQ	  _IOW(BCM_IOCTL, 0x878, int)

#define IOCTL_BCM_GPIO_MULTI_REQUEST		_IOW(BCM_IOCTL, 0x82D, IOCTL_BUFFER)
#define IOCTL_BCM_GPIO_MODE_REQUEST			_IOW(BCM_IOCTL, 0x82E, IOCTL_BUFFER)



typedef enum _BCM_INTERFACE_TYPE
{
        BCM_MII,
        BCM_CARDBUS,
        BCM_USB,
        BCM_SDIO,
        BCM_PCMCIA
}BCM_INTERFACE_TYPE;

typedef struct _DEVICE_DRIVER_INFO
{
	NVM_TYPE 			u32NVMType;
	UINT 				MaxRDMBufferSize;
	BCM_INTERFACE_TYPE 	u32InterfaceType;
	UINT 				u32DSDStartOffset;
	UINT				u32RxAlignmentCorrection;
	UINT 				u32Reserved[10];
} DEVICE_DRIVER_INFO;

typedef  struct _NVM_READWRITE
{

	void __user *pBuffer;
// Data to be written from|read to. Memory should be allocated by the caller.

	uint32_t  uiOffset;
// offset at which data should be written to or read from.

	uint32_t  uiNumBytes;
// No. of bytes to be written or read.

	bool  bVerify;
// Applicable only for write. If set verification of written data will be done.

} NVM_READWRITE,*PNVM_READWRITE;
typedef struct bulkwrmbuffer
{
	ULONG	Register;
	ULONG	SwapEndian;
	ULONG	Values[1];

}BULKWRM_BUFFER,*PBULKWRM_BUFFER;


/***********Structure used for FlashMap2.x *******************************/

/*
*	These are Sction present inside the Flash.
*	There is sectional RD/WR for flash Map 2.x.
*	hence these section will be used in read/write API.
*/

typedef enum _FLASH2X_SECTION_VAL
{
	NO_SECTION_VAL = 0, //no section is choosen when absolute offset is given for RD/WR
	ISO_IMAGE1,
	ISO_IMAGE2,
	DSD0,
	DSD1,
	DSD2,
	VSA0,
	VSA1,
	VSA2,
	SCSI,
	CONTROL_SECTION,
	ISO_IMAGE1_PART2,
	ISO_IMAGE1_PART3,
	ISO_IMAGE2_PART2,
	ISO_IMAGE2_PART3,
	TOTAL_SECTIONS
}FLASH2X_SECTION_VAL;

/*
*	Structure used for READ/WRITE Flash  Map2.x
*/
typedef struct _FLASH2X_READWRITE
{

	FLASH2X_SECTION_VAL Section; //which section has to be read/written
	B_UINT32 offset;		//Offset within Section.
	B_UINT32 numOfBytes;	//NOB from the offset
	B_UINT32  bVerify;
	void __user *pDataBuff;	//Buffer for reading/writing

}FLASH2X_READWRITE, *PFLASH2X_READWRITE;
/*
*	This structure is used for coping one section to other.
*	there are two ways to copy one section to other.
*	it NOB =0, complete section will be copied on to other.
*	if NOB !=0, only NOB will be copied from the given offset.
*/

typedef struct _FLASH2X_COPY_SECTION
{
	//Src Section from which Data has to be copied to DstSection
	FLASH2X_SECTION_VAL SrcSection;

	//Destination Section from where Data has to be coppied.
	FLASH2X_SECTION_VAL DstSection;

	//Offset within Section. if NOB =0 it will be ignored and data will be coped from offset 0.
	B_UINT32 offset;

	//NOB from the offset. if NOB = 0 complete src section will be copied to Destination section.
	B_UINT32 numOfBytes;
} FLASH2X_COPY_SECTION, *PFLASH2X_COPY_SECTION;


typedef enum _SECTION_TYPE
{
	ISO = 0,
	VSA = 1,
	DSD = 2
} SECTION_TYPE, *PSECTION_TYPE;

/*
*	This section provide the complete bitmap of the Flash.
*	using this map lib/APP will isssue read/write command.
	Fields are defined as :
	Bit [0] = section is present  //1:present, 0: Not present
*      Bit [1] = section is valid  //1: valid, 0: not valid
*      Bit [2] = Section is R/W  //0: RW, 1: RO
*	Bit [3] = Section is Active or not 1 means Active, 0->inactive
*      Bit [7...3] = Reserved
*/

typedef struct _FLASH2X_BITMAP
{
	UCHAR ISO_IMAGE1;
	UCHAR ISO_IMAGE2;
	UCHAR DSD0;
	UCHAR DSD1;
	UCHAR DSD2;
	UCHAR VSA0;
	UCHAR VSA1;
	UCHAR VSA2;
	UCHAR SCSI;
	UCHAR CONTROL_SECTION;
	//Reserved for future use
	UCHAR Reserved0;
	UCHAR Reserved1;
	UCHAR Reserved2;
}FLASH2X_BITMAP, *PFLASH2X_BITMAP;

//for net entry time check
typedef struct _ST_TIME_ELAPSED_
{
	ULONG64	ul64TimeElapsedSinceNetEntry;
	UINT32   uiReserved[4]; //By chance if required for future proofing
}ST_TIME_ELAPSED,*PST_TIME_ELAPSED;

enum {
  WIMAX_IDX=0, /*To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
  HOST_IDX,    /*To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
  MAX_IDX
};
typedef struct stGPIOMultiInfo
{
  UINT uiGPIOCommand; /* 1 for set and 0 for get*/
  UINT uiGPIOMask;    /* set the correspondig bit to 1 to access GPIO*/
  UINT uiGPIOValue;   /* 0 or 1; value to be set when command is 1.*/
}__attribute__((packed))GPIO_MULTI_INFO , *PGPIO_MULTI_INFO;

typedef struct stGPIOMultiMode
{
  UINT uiGPIOMode;    /* 1 for OUT mode, 0 for IN mode*/
  UINT uiGPIOMask;    /* GPIO mask to set mode*/
}__attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE;


#endif