1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
|
/*
* Synopsys Designware PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _PCIE_DESIGNWARE_H
#define _PCIE_DESIGNWARE_H
/* Parameters for the waiting for link up routine */
#define LINK_WAIT_MAX_RETRIES 10
#define LINK_WAIT_USLEEP_MIN 90000
#define LINK_WAIT_USLEEP_MAX 100000
/* Parameters for the waiting for iATU enabled routine */
#define LINK_WAIT_MAX_IATU_RETRIES 5
#define LINK_WAIT_IATU_MIN 9000
#define LINK_WAIT_IATU_MAX 10000
/* Synopsys-specific PCIe configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_MODE_MASK (0x3f << 16)
#define PORT_LINK_MODE_1_LANES (0x1 << 16)
#define PORT_LINK_MODE_2_LANES (0x3 << 16)
#define PORT_LINK_MODE_4_LANES (0x7 << 16)
#define PORT_LINK_MODE_8_LANES (0xf << 16)
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8)
#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8)
#define PCIE_MSI_ADDR_LO 0x820
#define PCIE_MSI_ADDR_HI 0x824
#define PCIE_MSI_INTR0_ENABLE 0x828
#define PCIE_MSI_INTR0_MASK 0x82C
#define PCIE_MSI_INTR0_STATUS 0x830
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
#define PCIE_ATU_CR1 0x904
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
#define PCIE_ATU_TYPE_IO (0x2 << 0)
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
#define PCIE_ATU_CR2 0x908
#define PCIE_ATU_ENABLE (0x1 << 31)
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
#define PCIE_ATU_LOWER_BASE 0x90C
#define PCIE_ATU_UPPER_BASE 0x910
#define PCIE_ATU_LIMIT 0x914
#define PCIE_ATU_LOWER_TARGET 0x918
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
#define PCIE_ATU_UPPER_TARGET 0x91C
/*
* iATU Unroll-specific register definitions
* From 4.80 core version the address translation will be made by unroll
*/
#define PCIE_ATU_UNR_REGION_CTRL1 0x00
#define PCIE_ATU_UNR_REGION_CTRL2 0x04
#define PCIE_ATU_UNR_LOWER_BASE 0x08
#define PCIE_ATU_UNR_UPPER_BASE 0x0C
#define PCIE_ATU_UNR_LIMIT 0x10
#define PCIE_ATU_UNR_LOWER_TARGET 0x14
#define PCIE_ATU_UNR_UPPER_TARGET 0x18
/* Register address builder */
#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
((0x3 << 20) | ((region) << 9))
/*
* Maximum number of MSI IRQs can be 256 per controller. But keep
* it 32 as of now. Probably we will never need more than 32. If needed,
* then increment it in multiple of 32.
*/
#define MAX_MSI_IRQS 32
#define MAX_MSI_CTRLS (MAX_MSI_IRQS / 32)
struct pcie_port {
struct device *dev;
u8 root_bus_nr;
void __iomem *dbi_base;
u64 cfg0_base;
void __iomem *va_cfg0_base;
u32 cfg0_size;
u64 cfg1_base;
void __iomem *va_cfg1_base;
u32 cfg1_size;
resource_size_t io_base;
phys_addr_t io_bus_addr;
u32 io_size;
u64 mem_base;
phys_addr_t mem_bus_addr;
u32 mem_size;
struct resource *cfg;
struct resource *io;
struct resource *mem;
struct resource *busn;
int irq;
u32 lanes;
u32 num_viewport;
struct pcie_host_ops *ops;
int msi_irq;
struct irq_domain *irq_domain;
unsigned long msi_data;
u8 iatu_unroll_enabled;
DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
};
struct pcie_host_ops {
u32 (*readl_rc)(struct pcie_port *pp, u32 reg);
void (*writel_rc)(struct pcie_port *pp, u32 reg, u32 val);
int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
int (*wr_own_conf)(struct pcie_port *pp, int where, int size, u32 val);
int (*rd_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
unsigned int devfn, int where, int size, u32 *val);
int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
unsigned int devfn, int where, int size, u32 val);
int (*link_up)(struct pcie_port *pp);
void (*host_init)(struct pcie_port *pp);
void (*msi_set_irq)(struct pcie_port *pp, int irq);
void (*msi_clear_irq)(struct pcie_port *pp, int irq);
phys_addr_t (*get_msi_addr)(struct pcie_port *pp);
u32 (*get_msi_data)(struct pcie_port *pp, int pos);
void (*scan_bus)(struct pcie_port *pp);
int (*msi_host_init)(struct pcie_port *pp, struct msi_controller *chip);
};
u32 dw_pcie_readl_rc(struct pcie_port *pp, u32 reg);
void dw_pcie_writel_rc(struct pcie_port *pp, u32 reg, u32 val);
int dw_pcie_read(void __iomem *addr, int size, u32 *val);
int dw_pcie_write(void __iomem *addr, int size, u32 val);
irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
void dw_pcie_msi_init(struct pcie_port *pp);
int dw_pcie_wait_for_link(struct pcie_port *pp);
int dw_pcie_link_up(struct pcie_port *pp);
void dw_pcie_setup_rc(struct pcie_port *pp);
int dw_pcie_host_init(struct pcie_port *pp);
#endif /* _PCIE_DESIGNWARE_H */
|
