1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
|
/*
* Synopsys Designware PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/types.h>
#include "pcie-designware.h"
/* PCIe Port Logic registers */
#define PLR_OFFSET 0x700
#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c)
#define PCIE_PHY_DEBUG_R1_LINK_UP (0x1 << 4)
#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING (0x1 << 29)
int dw_pcie_read(void __iomem *addr, int size, u32 *val)
{
if ((uintptr_t)addr & (size - 1)) {
*val = 0;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
if (size == 4) {
*val = readl(addr);
} else if (size == 2) {
*val = readw(addr);
} else if (size == 1) {
*val = readb(addr);
} else {
*val = 0;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
return PCIBIOS_SUCCESSFUL;
}
int dw_pcie_write(void __iomem *addr, int size, u32 val)
{
if ((uintptr_t)addr & (size - 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
if (size == 4)
writel(val, addr);
else if (size == 2)
writew(val, addr);
else if (size == 1)
writeb(val, addr);
else
return PCIBIOS_BAD_REGISTER_NUMBER;
return PCIBIOS_SUCCESSFUL;
}
u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
size_t size)
{
int ret;
u32 val;
if (pci->ops->read_dbi)
return pci->ops->read_dbi(pci, base, reg, size);
ret = dw_pcie_read(base + reg, size, &val);
if (ret)
dev_err(pci->dev, "read DBI address failed\n");
return val;
}
void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
size_t size, u32 val)
{
int ret;
if (pci->ops->write_dbi) {
pci->ops->write_dbi(pci, base, reg, size, val);
return;
}
ret = dw_pcie_write(base + reg, size, val);
if (ret)
dev_err(pci->dev, "write DBI address failed\n");
}
static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
{
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
return dw_pcie_readl_dbi(pci, offset + reg);
}
static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
u32 val)
{
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
dw_pcie_writel_dbi(pci, offset + reg, val);
}
void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index, int type,
u64 cpu_addr, u64 pci_addr, u32 size)
{
u32 retries, val;
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
lower_32_bits(cpu_addr));
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
upper_32_bits(cpu_addr));
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
lower_32_bits(cpu_addr + size - 1));
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
lower_32_bits(pci_addr));
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
upper_32_bits(pci_addr));
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
type);
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
PCIE_ATU_ENABLE);
/*
* Make sure ATU enable takes effect before any subsequent config
* and I/O accesses.
*/
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
val = dw_pcie_readl_ob_unroll(pci, index,
PCIE_ATU_UNR_REGION_CTRL2);
if (val & PCIE_ATU_ENABLE)
return;
usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
}
dev_err(pci->dev, "outbound iATU is not being enabled\n");
}
void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
u64 cpu_addr, u64 pci_addr, u32 size)
{
u32 retries, val;
if (pci->ops->cpu_addr_fixup)
cpu_addr = pci->ops->cpu_addr_fixup(cpu_addr);
if (pci->iatu_unroll_enabled) {
dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
pci_addr, size);
return;
}
dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
PCIE_ATU_REGION_OUTBOUND | index);
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
lower_32_bits(cpu_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
upper_32_bits(cpu_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
lower_32_bits(cpu_addr + size - 1));
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
lower_32_bits(pci_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
upper_32_bits(pci_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
/*
* Make sure ATU enable takes effect before any subsequent config
* and I/O accesses.
*/
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
if (val == PCIE_ATU_ENABLE)
return;
usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
}
dev_err(pci->dev, "outbound iATU is not being enabled\n");
}
int dw_pcie_wait_for_link(struct dw_pcie *pci)
{
int retries;
/* check if the link is up or not */
for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
if (dw_pcie_link_up(pci)) {
dev_info(pci->dev, "link up\n");
return 0;
}
usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
}
dev_err(pci->dev, "phy link never came up\n");
return -ETIMEDOUT;
}
int dw_pcie_link_up(struct dw_pcie *pci)
{
u32 val;
if (pci->ops->link_up)
return pci->ops->link_up(pci);
val = readl(pci->dbi_base + PCIE_PHY_DEBUG_R1);
return ((val & PCIE_PHY_DEBUG_R1_LINK_UP) &&
(!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)));
}
void dw_pcie_setup(struct dw_pcie *pci)
{
int ret;
u32 val;
u32 lanes;
struct device *dev = pci->dev;
struct device_node *np = dev->of_node;
ret = of_property_read_u32(np, "num-lanes", &lanes);
if (ret)
lanes = 0;
/* set the number of lanes */
val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
val &= ~PORT_LINK_MODE_MASK;
switch (lanes) {
case 1:
val |= PORT_LINK_MODE_1_LANES;
break;
case 2:
val |= PORT_LINK_MODE_2_LANES;
break;
case 4:
val |= PORT_LINK_MODE_4_LANES;
break;
case 8:
val |= PORT_LINK_MODE_8_LANES;
break;
default:
dev_err(pci->dev, "num-lanes %u: invalid value\n", lanes);
return;
}
dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
/* set link width speed control register */
val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
switch (lanes) {
case 1:
val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
break;
case 2:
val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
break;
case 4:
val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
break;
case 8:
val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
break;
}
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
}
|
