1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
|
// SPDX-License-Identifier: GPL-2.0+
/**
* Driver for Analog Devices Industrial Ethernet PHYs
*
* Copyright 2019 Analog Devices Inc.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/phy.h>
#define PHY_ID_ADIN1200 0x0283bc20
#define PHY_ID_ADIN1300 0x0283bc30
#define ADIN1300_MII_EXT_REG_PTR 0x0010
#define ADIN1300_MII_EXT_REG_DATA 0x0011
#define ADIN1300_INT_MASK_REG 0x0018
#define ADIN1300_INT_MDIO_SYNC_EN BIT(9)
#define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8)
#define ADIN1300_INT_ANEG_PAGE_RX_EN BIT(6)
#define ADIN1300_INT_IDLE_ERR_CNT_EN BIT(5)
#define ADIN1300_INT_MAC_FIFO_OU_EN BIT(4)
#define ADIN1300_INT_RX_STAT_CHNG_EN BIT(3)
#define ADIN1300_INT_LINK_STAT_CHNG_EN BIT(2)
#define ADIN1300_INT_SPEED_CHNG_EN BIT(1)
#define ADIN1300_INT_HW_IRQ_EN BIT(0)
#define ADIN1300_INT_MASK_EN \
(ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_HW_IRQ_EN)
#define ADIN1300_INT_STATUS_REG 0x0019
static int adin_config_init(struct phy_device *phydev)
{
return genphy_config_init(phydev);
}
static int adin_phy_ack_intr(struct phy_device *phydev)
{
/* Clear pending interrupts */
int rc = phy_read(phydev, ADIN1300_INT_STATUS_REG);
return rc < 0 ? rc : 0;
}
static int adin_phy_config_intr(struct phy_device *phydev)
{
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
return phy_set_bits(phydev, ADIN1300_INT_MASK_REG,
ADIN1300_INT_MASK_EN);
return phy_clear_bits(phydev, ADIN1300_INT_MASK_REG,
ADIN1300_INT_MASK_EN);
}
static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum)
{
struct mii_bus *bus = phydev->mdio.bus;
int phy_addr = phydev->mdio.addr;
int err;
err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, regnum);
if (err)
return err;
return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA);
}
static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum,
u16 val)
{
struct mii_bus *bus = phydev->mdio.bus;
int phy_addr = phydev->mdio.addr;
int err;
err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, regnum);
if (err)
return err;
return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val);
}
static struct phy_driver adin_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
.name = "ADIN1200",
.config_init = adin_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = adin_phy_ack_intr,
.config_intr = adin_phy_config_intr,
.resume = genphy_resume,
.suspend = genphy_suspend,
.read_mmd = adin_read_mmd,
.write_mmd = adin_write_mmd,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
.name = "ADIN1300",
.config_init = adin_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = adin_phy_ack_intr,
.config_intr = adin_phy_config_intr,
.resume = genphy_resume,
.suspend = genphy_suspend,
.read_mmd = adin_read_mmd,
.write_mmd = adin_write_mmd,
},
};
module_phy_driver(adin_driver);
static struct mdio_device_id __maybe_unused adin_tbl[] = {
{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200) },
{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300) },
{ }
};
MODULE_DEVICE_TABLE(mdio, adin_tbl);
MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver");
MODULE_LICENSE("GPL");
|
