1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
|
/*
* Amlogic SD/eMMC driver for the GX/S905 family SoCs
*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Kevin Hilman <khilman@baylibre.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/regulator/consumer.h>
#include <linux/interrupt.h>
#define DRIVER_NAME "meson-gx-mmc"
#define SD_EMMC_CLOCK 0x0
#define CLK_DIV_SHIFT 0
#define CLK_DIV_WIDTH 6
#define CLK_DIV_MASK 0x3f
#define CLK_DIV_MAX 63
#define CLK_SRC_SHIFT 6
#define CLK_SRC_WIDTH 2
#define CLK_SRC_MASK 0x3
#define CLK_SRC_XTAL 0 /* external crystal */
#define CLK_SRC_XTAL_RATE 24000000
#define CLK_SRC_PLL 1 /* FCLK_DIV2 */
#define CLK_SRC_PLL_RATE 1000000000
#define CLK_PHASE_SHIFT 8
#define CLK_PHASE_MASK 0x3
#define CLK_PHASE_0 0
#define CLK_PHASE_90 1
#define CLK_PHASE_180 2
#define CLK_PHASE_270 3
#define CLK_ALWAYS_ON BIT(24)
#define SD_EMMC_DElAY 0x4
#define SD_EMMC_ADJUST 0x8
#define SD_EMMC_CALOUT 0x10
#define SD_EMMC_START 0x40
#define START_DESC_INIT BIT(0)
#define START_DESC_BUSY BIT(1)
#define START_DESC_ADDR_SHIFT 2
#define START_DESC_ADDR_MASK (~0x3)
#define SD_EMMC_CFG 0x44
#define CFG_BUS_WIDTH_SHIFT 0
#define CFG_BUS_WIDTH_MASK 0x3
#define CFG_BUS_WIDTH_1 0x0
#define CFG_BUS_WIDTH_4 0x1
#define CFG_BUS_WIDTH_8 0x2
#define CFG_DDR BIT(2)
#define CFG_BLK_LEN_SHIFT 4
#define CFG_BLK_LEN_MASK 0xf
#define CFG_RESP_TIMEOUT_SHIFT 8
#define CFG_RESP_TIMEOUT_MASK 0xf
#define CFG_RC_CC_SHIFT 12
#define CFG_RC_CC_MASK 0xf
#define CFG_STOP_CLOCK BIT(22)
#define CFG_CLK_ALWAYS_ON BIT(18)
#define CFG_CHK_DS BIT(20)
#define CFG_AUTO_CLK BIT(23)
#define SD_EMMC_STATUS 0x48
#define STATUS_BUSY BIT(31)
#define SD_EMMC_IRQ_EN 0x4c
#define IRQ_EN_MASK 0x3fff
#define IRQ_RXD_ERR_SHIFT 0
#define IRQ_RXD_ERR_MASK 0xff
#define IRQ_TXD_ERR BIT(8)
#define IRQ_DESC_ERR BIT(9)
#define IRQ_RESP_ERR BIT(10)
#define IRQ_RESP_TIMEOUT BIT(11)
#define IRQ_DESC_TIMEOUT BIT(12)
#define IRQ_END_OF_CHAIN BIT(13)
#define IRQ_RESP_STATUS BIT(14)
#define IRQ_SDIO BIT(15)
#define SD_EMMC_CMD_CFG 0x50
#define SD_EMMC_CMD_ARG 0x54
#define SD_EMMC_CMD_DAT 0x58
#define SD_EMMC_CMD_RSP 0x5c
#define SD_EMMC_CMD_RSP1 0x60
#define SD_EMMC_CMD_RSP2 0x64
#define SD_EMMC_CMD_RSP3 0x68
#define SD_EMMC_RXD 0x94
#define SD_EMMC_TXD 0x94
#define SD_EMMC_LAST_REG SD_EMMC_TXD
#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
#define MUX_CLK_NUM_PARENTS 2
struct meson_host {
struct device *dev;
struct mmc_host *mmc;
struct mmc_command *cmd;
spinlock_t lock;
void __iomem *regs;
struct clk *core_clk;
struct clk_mux mux;
struct clk *mux_clk;
unsigned long current_clock;
struct clk_divider cfg_div;
struct clk *cfg_div_clk;
unsigned int bounce_buf_size;
void *bounce_buf;
dma_addr_t bounce_dma_addr;
bool vqmmc_enabled;
};
struct sd_emmc_desc {
u32 cmd_cfg;
u32 cmd_arg;
u32 cmd_data;
u32 cmd_resp;
};
#define CMD_CFG_LENGTH_SHIFT 0
#define CMD_CFG_LENGTH_MASK 0x1ff
#define CMD_CFG_BLOCK_MODE BIT(9)
#define CMD_CFG_R1B BIT(10)
#define CMD_CFG_END_OF_CHAIN BIT(11)
#define CMD_CFG_TIMEOUT_SHIFT 12
#define CMD_CFG_TIMEOUT_MASK 0xf
#define CMD_CFG_NO_RESP BIT(16)
#define CMD_CFG_NO_CMD BIT(17)
#define CMD_CFG_DATA_IO BIT(18)
#define CMD_CFG_DATA_WR BIT(19)
#define CMD_CFG_RESP_NOCRC BIT(20)
#define CMD_CFG_RESP_128 BIT(21)
#define CMD_CFG_RESP_NUM BIT(22)
#define CMD_CFG_DATA_NUM BIT(23)
#define CMD_CFG_CMD_INDEX_SHIFT 24
#define CMD_CFG_CMD_INDEX_MASK 0x3f
#define CMD_CFG_ERROR BIT(30)
#define CMD_CFG_OWNER BIT(31)
#define CMD_DATA_MASK (~0x3)
#define CMD_DATA_BIG_ENDIAN BIT(1)
#define CMD_DATA_SRAM BIT(0)
#define CMD_RESP_MASK (~0x1)
#define CMD_RESP_SRAM BIT(0)
static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
{
struct mmc_host *mmc = host->mmc;
int ret;
u32 cfg;
if (clk_rate) {
if (WARN_ON(clk_rate > mmc->f_max))
clk_rate = mmc->f_max;
else if (WARN_ON(clk_rate < mmc->f_min))
clk_rate = mmc->f_min;
}
if (clk_rate == host->current_clock)
return 0;
/* stop clock */
cfg = readl(host->regs + SD_EMMC_CFG);
if (!(cfg & CFG_STOP_CLOCK)) {
cfg |= CFG_STOP_CLOCK;
writel(cfg, host->regs + SD_EMMC_CFG);
}
dev_dbg(host->dev, "change clock rate %u -> %lu\n",
mmc->actual_clock, clk_rate);
if (!clk_rate) {
mmc->actual_clock = 0;
host->current_clock = 0;
/* return with clock being stopped */
return 0;
}
ret = clk_set_rate(host->cfg_div_clk, clk_rate);
if (ret) {
dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
clk_rate, ret);
return ret;
}
mmc->actual_clock = clk_get_rate(host->cfg_div_clk);
host->current_clock = clk_rate;
if (clk_rate != mmc->actual_clock)
dev_dbg(host->dev,
"divider requested rate %lu != actual rate %u\n",
clk_rate, mmc->actual_clock);
/* (re)start clock */
cfg = readl(host->regs + SD_EMMC_CFG);
cfg &= ~CFG_STOP_CLOCK;
writel(cfg, host->regs + SD_EMMC_CFG);
return 0;
}
/*
* The SD/eMMC IP block has an internal mux and divider used for
* generating the MMC clock. Use the clock framework to create and
* manage these clocks.
*/
static int meson_mmc_clk_init(struct meson_host *host)
{
struct clk_init_data init;
char clk_name[32];
int i, ret = 0;
const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
const char *clk_div_parents[1];
u32 clk_reg, cfg;
/* get the mux parents */
for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
struct clk *clk;
char name[16];
snprintf(name, sizeof(name), "clkin%d", i);
clk = devm_clk_get(host->dev, name);
if (IS_ERR(clk)) {
if (clk != ERR_PTR(-EPROBE_DEFER))
dev_err(host->dev, "Missing clock %s\n", name);
return PTR_ERR(clk);
}
mux_parent_names[i] = __clk_get_name(clk);
}
/* create the mux */
snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
init.name = clk_name;
init.ops = &clk_mux_ops;
init.flags = 0;
init.parent_names = mux_parent_names;
init.num_parents = MUX_CLK_NUM_PARENTS;
host->mux.reg = host->regs + SD_EMMC_CLOCK;
host->mux.shift = CLK_SRC_SHIFT;
host->mux.mask = CLK_SRC_MASK;
host->mux.flags = 0;
host->mux.table = NULL;
host->mux.hw.init = &init;
host->mux_clk = devm_clk_register(host->dev, &host->mux.hw);
if (WARN_ON(IS_ERR(host->mux_clk)))
return PTR_ERR(host->mux_clk);
/* create the divider */
snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
init.name = clk_name;
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
clk_div_parents[0] = __clk_get_name(host->mux_clk);
init.parent_names = clk_div_parents;
init.num_parents = ARRAY_SIZE(clk_div_parents);
host->cfg_div.reg = host->regs + SD_EMMC_CLOCK;
host->cfg_div.shift = CLK_DIV_SHIFT;
host->cfg_div.width = CLK_DIV_WIDTH;
host->cfg_div.hw.init = &init;
host->cfg_div.flags = CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_ALLOW_ZERO;
host->cfg_div_clk = devm_clk_register(host->dev, &host->cfg_div.hw);
if (WARN_ON(PTR_ERR_OR_ZERO(host->cfg_div_clk)))
return PTR_ERR(host->cfg_div_clk);
/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
clk_reg = 0;
clk_reg |= CLK_PHASE_180 << CLK_PHASE_SHIFT;
clk_reg |= CLK_SRC_XTAL << CLK_SRC_SHIFT;
clk_reg |= CLK_DIV_MAX << CLK_DIV_SHIFT;
clk_reg &= ~CLK_ALWAYS_ON;
writel(clk_reg, host->regs + SD_EMMC_CLOCK);
/* Ensure clock starts in "auto" mode, not "always on" */
cfg = readl(host->regs + SD_EMMC_CFG);
cfg &= ~CFG_CLK_ALWAYS_ON;
cfg |= CFG_AUTO_CLK;
writel(cfg, host->regs + SD_EMMC_CFG);
ret = clk_prepare_enable(host->cfg_div_clk);
if (ret)
return ret;
/* Get the nearest minimum clock to 400KHz */
host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
ret = meson_mmc_clk_set(host, host->mmc->f_min);
if (ret)
clk_disable_unprepare(host->cfg_div_clk);
return ret;
}
static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct meson_host *host = mmc_priv(mmc);
u32 bus_width;
u32 val, orig;
/*
* GPIO regulator, only controls switching between 1v8 and
* 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON.
*/
switch (ios->power_mode) {
case MMC_POWER_OFF:
if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
regulator_disable(mmc->supply.vqmmc);
host->vqmmc_enabled = false;
}
break;
case MMC_POWER_UP:
if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
break;
case MMC_POWER_ON:
if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
int ret = regulator_enable(mmc->supply.vqmmc);
if (ret < 0)
dev_err(mmc_dev(mmc),
"failed to enable vqmmc regulator\n");
else
host->vqmmc_enabled = true;
}
break;
}
meson_mmc_clk_set(host, ios->clock);
/* Bus width */
switch (ios->bus_width) {
case MMC_BUS_WIDTH_1:
bus_width = CFG_BUS_WIDTH_1;
break;
case MMC_BUS_WIDTH_4:
bus_width = CFG_BUS_WIDTH_4;
break;
case MMC_BUS_WIDTH_8:
bus_width = CFG_BUS_WIDTH_8;
break;
default:
dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n",
ios->bus_width);
bus_width = CFG_BUS_WIDTH_4;
}
val = readl(host->regs + SD_EMMC_CFG);
orig = val;
val &= ~(CFG_BUS_WIDTH_MASK << CFG_BUS_WIDTH_SHIFT);
val |= bus_width << CFG_BUS_WIDTH_SHIFT;
val &= ~CFG_DDR;
if (ios->timing == MMC_TIMING_UHS_DDR50 ||
ios->timing == MMC_TIMING_MMC_DDR52 ||
ios->timing == MMC_TIMING_MMC_HS400)
val |= CFG_DDR;
val &= ~CFG_CHK_DS;
if (ios->timing == MMC_TIMING_MMC_HS400)
val |= CFG_CHK_DS;
if (val != orig) {
writel(val, host->regs + SD_EMMC_CFG);
dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
__func__, orig, val);
}
}
static void meson_mmc_request_done(struct mmc_host *mmc,
struct mmc_request *mrq)
{
struct meson_host *host = mmc_priv(mmc);
host->cmd = NULL;
mmc_request_done(host->mmc, mrq);
}
static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct meson_host *host = mmc_priv(mmc);
struct sd_emmc_desc *desc, desc_tmp;
u32 cfg;
u8 blk_len, cmd_cfg_timeout;
unsigned int xfer_bytes = 0;
/* Setup descriptors */
dma_rmb();
desc = &desc_tmp;
memset(desc, 0, sizeof(struct sd_emmc_desc));
desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) <<
CMD_CFG_CMD_INDEX_SHIFT;
desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
desc->cmd_arg = cmd->arg;
/* Response */
if (cmd->flags & MMC_RSP_PRESENT) {
desc->cmd_cfg &= ~CMD_CFG_NO_RESP;
if (cmd->flags & MMC_RSP_136)
desc->cmd_cfg |= CMD_CFG_RESP_128;
desc->cmd_cfg |= CMD_CFG_RESP_NUM;
desc->cmd_resp = 0;
if (!(cmd->flags & MMC_RSP_CRC))
desc->cmd_cfg |= CMD_CFG_RESP_NOCRC;
if (cmd->flags & MMC_RSP_BUSY)
desc->cmd_cfg |= CMD_CFG_R1B;
} else {
desc->cmd_cfg |= CMD_CFG_NO_RESP;
}
/* data? */
if (cmd->data) {
desc->cmd_cfg |= CMD_CFG_DATA_IO;
if (cmd->data->blocks > 1) {
desc->cmd_cfg |= CMD_CFG_BLOCK_MODE;
desc->cmd_cfg |=
(cmd->data->blocks & CMD_CFG_LENGTH_MASK) <<
CMD_CFG_LENGTH_SHIFT;
/* check if block-size matches, if not update */
cfg = readl(host->regs + SD_EMMC_CFG);
blk_len = cfg & (CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT);
blk_len >>= CFG_BLK_LEN_SHIFT;
if (blk_len != ilog2(cmd->data->blksz)) {
dev_dbg(host->dev, "%s: update blk_len %d -> %d\n",
__func__, blk_len,
ilog2(cmd->data->blksz));
blk_len = ilog2(cmd->data->blksz);
cfg &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT);
cfg |= blk_len << CFG_BLK_LEN_SHIFT;
writel(cfg, host->regs + SD_EMMC_CFG);
}
} else {
desc->cmd_cfg &= ~CMD_CFG_BLOCK_MODE;
desc->cmd_cfg |=
(cmd->data->blksz & CMD_CFG_LENGTH_MASK) <<
CMD_CFG_LENGTH_SHIFT;
}
cmd->data->bytes_xfered = 0;
xfer_bytes = cmd->data->blksz * cmd->data->blocks;
if (cmd->data->flags & MMC_DATA_WRITE) {
desc->cmd_cfg |= CMD_CFG_DATA_WR;
WARN_ON(xfer_bytes > host->bounce_buf_size);
sg_copy_to_buffer(cmd->data->sg, cmd->data->sg_len,
host->bounce_buf, xfer_bytes);
cmd->data->bytes_xfered = xfer_bytes;
dma_wmb();
} else {
desc->cmd_cfg &= ~CMD_CFG_DATA_WR;
}
desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA);
} else {
desc->cmd_cfg &= ~CMD_CFG_DATA_IO;
cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT);
}
desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) <<
CMD_CFG_TIMEOUT_SHIFT;
host->cmd = cmd;
/* Last descriptor */
desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN;
writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT);
writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP);
wmb(); /* ensure descriptor is written before kicked */
writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG);
}
static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct meson_host *host = mmc_priv(mmc);
/* Stop execution */
writel(0, host->regs + SD_EMMC_START);
if (mrq->sbc)
meson_mmc_start_cmd(mmc, mrq->sbc);
else
meson_mmc_start_cmd(mmc, mrq->cmd);
}
static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct meson_host *host = mmc_priv(mmc);
if (cmd->flags & MMC_RSP_136) {
cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3);
cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2);
cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1);
cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP);
} else if (cmd->flags & MMC_RSP_PRESENT) {
cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
}
}
static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
{
struct meson_host *host = dev_id;
struct mmc_command *cmd;
u32 irq_en, status, raw_status;
irqreturn_t ret = IRQ_HANDLED;
if (WARN_ON(!host))
return IRQ_NONE;
cmd = host->cmd;
if (WARN_ON(!cmd))
return IRQ_NONE;
spin_lock(&host->lock);
irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
raw_status = readl(host->regs + SD_EMMC_STATUS);
status = raw_status & irq_en;
if (!status) {
dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n",
raw_status, irq_en);
ret = IRQ_NONE;
goto out;
}
cmd->error = 0;
if (status & IRQ_RXD_ERR_MASK) {
dev_dbg(host->dev, "Unhandled IRQ: RXD error\n");
cmd->error = -EILSEQ;
}
if (status & IRQ_TXD_ERR) {
dev_dbg(host->dev, "Unhandled IRQ: TXD error\n");
cmd->error = -EILSEQ;
}
if (status & IRQ_DESC_ERR)
dev_dbg(host->dev, "Unhandled IRQ: Descriptor error\n");
if (status & IRQ_RESP_ERR) {
dev_dbg(host->dev, "Unhandled IRQ: Response error\n");
cmd->error = -EILSEQ;
}
if (status & IRQ_RESP_TIMEOUT) {
dev_dbg(host->dev, "Unhandled IRQ: Response timeout\n");
cmd->error = -ETIMEDOUT;
}
if (status & IRQ_DESC_TIMEOUT) {
dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n");
cmd->error = -ETIMEDOUT;
}
if (status & IRQ_SDIO)
dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n");
if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS))
ret = IRQ_WAKE_THREAD;
else {
dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC CMD%u arg=0x%08x flags=0x%08x stop=%d\n",
status, cmd->opcode, cmd->arg,
cmd->flags, cmd->mrq->stop ? 1 : 0);
if (cmd->data) {
struct mmc_data *data = cmd->data;
dev_warn(host->dev, "\tblksz %u blocks %u flags 0x%08x (%s%s)",
data->blksz, data->blocks, data->flags,
data->flags & MMC_DATA_WRITE ? "write" : "",
data->flags & MMC_DATA_READ ? "read" : "");
}
}
out:
/* ack all (enabled) interrupts */
writel(status, host->regs + SD_EMMC_STATUS);
if (ret == IRQ_HANDLED) {
meson_mmc_read_resp(host->mmc, cmd);
meson_mmc_request_done(host->mmc, cmd->mrq);
}
spin_unlock(&host->lock);
return ret;
}
static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
{
struct meson_host *host = dev_id;
struct mmc_command *cmd = host->cmd;
struct mmc_data *data;
unsigned int xfer_bytes;
if (WARN_ON(!cmd))
return IRQ_NONE;
data = cmd->data;
if (data && data->flags & MMC_DATA_READ) {
xfer_bytes = data->blksz * data->blocks;
WARN_ON(xfer_bytes > host->bounce_buf_size);
sg_copy_from_buffer(data->sg, data->sg_len,
host->bounce_buf, xfer_bytes);
data->bytes_xfered = xfer_bytes;
}
meson_mmc_read_resp(host->mmc, cmd);
if (!data || !data->stop || cmd->mrq->sbc)
meson_mmc_request_done(host->mmc, cmd->mrq);
else
meson_mmc_start_cmd(host->mmc, data->stop);
return IRQ_HANDLED;
}
/*
* NOTE: we only need this until the GPIO/pinctrl driver can handle
* interrupts. For now, the MMC core will use this for polling.
*/
static int meson_mmc_get_cd(struct mmc_host *mmc)
{
int status = mmc_gpio_get_cd(mmc);
if (status == -ENOSYS)
return 1; /* assume present */
return status;
}
static void meson_mmc_cfg_init(struct meson_host *host)
{
u32 cfg = 0;
cfg |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
cfg |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
cfg |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
writel(cfg, host->regs + SD_EMMC_CFG);
}
static const struct mmc_host_ops meson_mmc_ops = {
.request = meson_mmc_request,
.set_ios = meson_mmc_set_ios,
.get_cd = meson_mmc_get_cd,
};
static int meson_mmc_probe(struct platform_device *pdev)
{
struct resource *res;
struct meson_host *host;
struct mmc_host *mmc;
int ret, irq;
mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev);
if (!mmc)
return -ENOMEM;
host = mmc_priv(mmc);
host->mmc = mmc;
host->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, host);
spin_lock_init(&host->lock);
/* Get regulators and the supported OCR mask */
host->vqmmc_enabled = false;
ret = mmc_regulator_get_supply(mmc);
if (ret == -EPROBE_DEFER)
goto free_host;
ret = mmc_of_parse(mmc);
if (ret) {
if (ret != -EPROBE_DEFER)
dev_warn(&pdev->dev, "error parsing DT: %d\n", ret);
goto free_host;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->regs)) {
ret = PTR_ERR(host->regs);
goto free_host;
}
irq = platform_get_irq(pdev, 0);
if (!irq) {
dev_err(&pdev->dev, "failed to get interrupt resource.\n");
ret = -EINVAL;
goto free_host;
}
host->core_clk = devm_clk_get(&pdev->dev, "core");
if (IS_ERR(host->core_clk)) {
ret = PTR_ERR(host->core_clk);
goto free_host;
}
ret = clk_prepare_enable(host->core_clk);
if (ret)
goto free_host;
ret = meson_mmc_clk_init(host);
if (ret)
goto err_core_clk;
/* Stop execution */
writel(0, host->regs + SD_EMMC_START);
/* clear, ack, enable all interrupts */
writel(0, host->regs + SD_EMMC_IRQ_EN);
writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
/* set config to sane default */
meson_mmc_cfg_init(host);
ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
meson_mmc_irq_thread, IRQF_SHARED,
DRIVER_NAME, host);
if (ret)
goto err_div_clk;
mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
/* data bounce buffer */
host->bounce_buf_size = mmc->max_req_size;
host->bounce_buf =
dma_alloc_coherent(host->dev, host->bounce_buf_size,
&host->bounce_dma_addr, GFP_KERNEL);
if (host->bounce_buf == NULL) {
dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
ret = -ENOMEM;
goto err_div_clk;
}
mmc->ops = &meson_mmc_ops;
mmc_add_host(mmc);
return 0;
err_div_clk:
clk_disable_unprepare(host->cfg_div_clk);
err_core_clk:
clk_disable_unprepare(host->core_clk);
free_host:
mmc_free_host(mmc);
return ret;
}
static int meson_mmc_remove(struct platform_device *pdev)
{
struct meson_host *host = dev_get_drvdata(&pdev->dev);
mmc_remove_host(host->mmc);
/* disable interrupts */
writel(0, host->regs + SD_EMMC_IRQ_EN);
dma_free_coherent(host->dev, host->bounce_buf_size,
host->bounce_buf, host->bounce_dma_addr);
clk_disable_unprepare(host->cfg_div_clk);
clk_disable_unprepare(host->core_clk);
mmc_free_host(host->mmc);
return 0;
}
static const struct of_device_id meson_mmc_of_match[] = {
{ .compatible = "amlogic,meson-gx-mmc", },
{ .compatible = "amlogic,meson-gxbb-mmc", },
{ .compatible = "amlogic,meson-gxl-mmc", },
{ .compatible = "amlogic,meson-gxm-mmc", },
{}
};
MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
static struct platform_driver meson_mmc_driver = {
.probe = meson_mmc_probe,
.remove = meson_mmc_remove,
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(meson_mmc_of_match),
},
};
module_platform_driver(meson_mmc_driver);
MODULE_DESCRIPTION("Amlogic S905*/GX* SD/eMMC driver");
MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>");
MODULE_LICENSE("GPL v2");
|