1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
/*
* STMicroelectronics st_lsm6dsx sensor driver
*
* Copyright 2016 STMicroelectronics Inc.
*
* Lorenzo Bianconi <lorenzo.bianconi@st.com>
* Denis Ciocca <denis.ciocca@st.com>
*
* Licensed under the GPL-2.
*/
#ifndef ST_LSM6DSX_H
#define ST_LSM6DSX_H
#include <linux/device.h>
#define ST_LSM6DS3_DEV_NAME "lsm6ds3"
#define ST_LSM6DSM_DEV_NAME "lsm6dsm"
enum st_lsm6dsx_hw_id {
ST_LSM6DS3_ID,
ST_LSM6DSM_ID,
ST_LSM6DSX_MAX_ID,
};
#define ST_LSM6DSX_CHAN_SIZE 2
#define ST_LSM6DSX_SAMPLE_SIZE 6
#define ST_LSM6DSX_SAMPLE_DEPTH (ST_LSM6DSX_SAMPLE_SIZE / \
ST_LSM6DSX_CHAN_SIZE)
#if defined(CONFIG_SPI_MASTER)
#define ST_LSM6DSX_RX_MAX_LENGTH 256
#define ST_LSM6DSX_TX_MAX_LENGTH 8
struct st_lsm6dsx_transfer_buffer {
u8 rx_buf[ST_LSM6DSX_RX_MAX_LENGTH];
u8 tx_buf[ST_LSM6DSX_TX_MAX_LENGTH] ____cacheline_aligned;
};
#endif /* CONFIG_SPI_MASTER */
struct st_lsm6dsx_transfer_function {
int (*read)(struct device *dev, u8 addr, int len, u8 *data);
int (*write)(struct device *dev, u8 addr, int len, u8 *data);
};
struct st_lsm6dsx_reg {
u8 addr;
u8 mask;
};
struct st_lsm6dsx_settings {
u8 wai;
u16 max_fifo_size;
enum st_lsm6dsx_hw_id id[ST_LSM6DSX_MAX_ID];
};
enum st_lsm6dsx_sensor_id {
ST_LSM6DSX_ID_ACC,
ST_LSM6DSX_ID_GYRO,
ST_LSM6DSX_ID_MAX,
};
enum st_lsm6dsx_fifo_mode {
ST_LSM6DSX_FIFO_BYPASS = 0x0,
ST_LSM6DSX_FIFO_CONT = 0x6,
};
/**
* struct st_lsm6dsx_sensor - ST IMU sensor instance
* @id: Sensor identifier.
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
* @gain: Configured sensor sensitivity.
* @odr: Output data rate of the sensor [Hz].
* @watermark: Sensor watermark level.
* @sip: Number of samples in a given pattern.
* @decimator: FIFO decimation factor.
* @decimator_mask: Sensor mask for decimation register.
* @delta_ts: Delta time between two consecutive interrupts.
* @ts: Latest timestamp from the interrupt handler.
*/
struct st_lsm6dsx_sensor {
enum st_lsm6dsx_sensor_id id;
struct st_lsm6dsx_hw *hw;
u32 gain;
u16 odr;
u16 watermark;
u8 sip;
u8 decimator;
u8 decimator_mask;
s64 delta_ts;
s64 ts;
};
/**
* struct st_lsm6dsx_hw - ST IMU MEMS hw instance
* @dev: Pointer to instance of struct device (I2C or SPI).
* @irq: Device interrupt line (I2C or SPI).
* @lock: Mutex to protect read and write operations.
* @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
* @fifo_mode: FIFO operating mode supported by the device.
* @enable_mask: Enabled sensor bitmask.
* @sip: Total number of samples (acc/gyro) in a given pattern.
* @iio_devs: Pointers to acc/gyro iio_dev instances.
* @settings: Pointer to the specific sensor settings in use.
* @tf: Transfer function structure used by I/O operations.
* @tb: Transfer buffers used by SPI I/O operations.
*/
struct st_lsm6dsx_hw {
struct device *dev;
int irq;
struct mutex lock;
struct mutex fifo_lock;
enum st_lsm6dsx_fifo_mode fifo_mode;
u8 enable_mask;
u8 sip;
struct iio_dev *iio_devs[ST_LSM6DSX_ID_MAX];
const struct st_lsm6dsx_settings *settings;
const struct st_lsm6dsx_transfer_function *tf;
#if defined(CONFIG_SPI_MASTER)
struct st_lsm6dsx_transfer_buffer tb;
#endif /* CONFIG_SPI_MASTER */
};
int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
const struct st_lsm6dsx_transfer_function *tf_ops);
int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor);
int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor);
int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw);
int st_lsm6dsx_write_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, u8 mask,
u8 val);
int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor,
u16 watermark);
#endif /* ST_LSM6DSX_H */
|
