path: root/arch/unicore32/mm/mmu.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * linux/arch/unicore32/mm/mmu.c
 *
 * Code specific to PKUnity SoC and UniCore ISA
 *
 * Copyright (C) 2001-2010 GUAN Xue-tao
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/fs.h>
#include <linux/io.h>

#include <asm/cputype.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <linux/sizes.h>
#include <asm/tlb.h>
#include <asm/memblock.h>

#include <mach/map.h>

#include "mm.h"

/*
 * empty_zero_page is a special page that is used for
 * zero-initialized data and COW.
 */
struct page *empty_zero_page;
EXPORT_SYMBOL(empty_zero_page);

/*
 * The pmd table for the upper-most set of pages.
 */
pmd_t *top_pmd;

pgprot_t pgprot_user;
EXPORT_SYMBOL(pgprot_user);

pgprot_t pgprot_kernel;
EXPORT_SYMBOL(pgprot_kernel);

static int __init noalign_setup(char *__unused)
{
	cr_alignment &= ~CR_A;
	cr_no_alignment &= ~CR_A;
	set_cr(cr_alignment);
	return 1;
}
__setup("noalign", noalign_setup);

void adjust_cr(unsigned long mask, unsigned long set)
{
	unsigned long flags;

	mask &= ~CR_A;

	set &= mask;

	local_irq_save(flags);

	cr_no_alignment = (cr_no_alignment & ~mask) | set;
	cr_alignment = (cr_alignment & ~mask) | set;

	set_cr((get_cr() & ~mask) | set);

	local_irq_restore(flags);
}

struct map_desc {
	unsigned long virtual;
	unsigned long pfn;
	unsigned long length;
	unsigned int type;
};

#define PROT_PTE_DEVICE		(PTE_PRESENT | PTE_YOUNG |	\
				PTE_DIRTY | PTE_READ | PTE_WRITE)
#define PROT_SECT_DEVICE	(PMD_TYPE_SECT | PMD_PRESENT |	\
				PMD_SECT_READ | PMD_SECT_WRITE)

static struct mem_type mem_types[] = {
	[MT_DEVICE] = {		  /* Strongly ordered */
		.prot_pte	= PROT_PTE_DEVICE,
		.prot_l1	= PMD_TYPE_TABLE | PMD_PRESENT,
		.prot_sect	= PROT_SECT_DEVICE,
	},
	/*
	 * MT_KUSER: pte for vecpage -- cacheable,
	 *       and sect for unigfx mmap -- noncacheable
	 */
	[MT_KUSER] = {
		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
				PTE_CACHEABLE | PTE_READ | PTE_EXEC,
		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
		.prot_sect = PROT_SECT_DEVICE,
	},
	[MT_HIGH_VECTORS] = {
		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
				PTE_CACHEABLE | PTE_READ | PTE_WRITE |
				PTE_EXEC,
		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
	},
	[MT_MEMORY] = {
		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
				PTE_WRITE | PTE_EXEC,
		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
		.prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
				PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC,
	},
	[MT_ROM] = {
		.prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
				PMD_SECT_READ,
	},
};

const struct mem_type *get_mem_type(unsigned int type)
{
	return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
}
EXPORT_SYMBOL(get_mem_type);

/*
 * Adjust the PMD section entries according to the CPU in use.
 */
static void __init build_mem_type_table(void)
{
	pgprot_user   = __pgprot(PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE);
	pgprot_kernel = __pgprot(PTE_PRESENT | PTE_YOUNG |
				 PTE_DIRTY | PTE_READ | PTE_WRITE |
				 PTE_EXEC | PTE_CACHEABLE);
}

#define vectors_base()	(vectors_high() ? 0xffff0000 : 0)

static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
		unsigned long prot)
{
	if (pmd_none(*pmd)) {
		size_t size = PTRS_PER_PTE * sizeof(pte_t);
		pte_t *pte = memblock_alloc(size, size);

		if (!pte)
			panic("%s: Failed to allocate %zu bytes align=%zx\n",
			      __func__, size, size);

		__pmd_populate(pmd, __pa(pte) | prot);
	}
	BUG_ON(pmd_bad(*pmd));
	return pte_offset_kernel(pmd, addr);
}

static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
				  unsigned long end, unsigned long pfn,
				  const struct mem_type *type)
{
	pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
	do {
		set_pte(pte, pfn_pte(pfn, __pgprot(type->prot_pte)));
		pfn++;
	} while (pte++, addr += PAGE_SIZE, addr != end);
}

static void __init alloc_init_section(pgd_t *pgd, unsigned long addr,
				      unsigned long end, unsigned long phys,
				      const struct mem_type *type)
{
	pmd_t *pmd = pmd_offset((pud_t *)pgd, addr);

	/*
	 * Try a section mapping - end, addr and phys must all be aligned
	 * to a section boundary.
	 */
	if (((addr | end | phys) & ~SECTION_MASK) == 0) {
		pmd_t *p = pmd;

		do {
			set_pmd(pmd, __pmd(phys | type->prot_sect));
			phys += SECTION_SIZE;
		} while (pmd++, addr += SECTION_SIZE, addr != end);

		flush_pmd_entry(p);
	} else {
		/*
		 * No need to loop; pte's aren't interested in the
		 * individual L1 entries.
		 */
		alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
	}
}

/*
 * Create the page directory entries and any necessary
 * page tables for the mapping specified by `md'.  We
 * are able to cope here with varying sizes and address
 * offsets, and we take full advantage of sections.
 */
static void __init create_mapping(struct map_desc *md)
{
	unsigned long phys, addr, length, end;
	const struct mem_type *type;
	pgd_t *pgd;

	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
		printk(KERN_WARNING "BUG: not creating mapping for "
		       "0x%08llx at 0x%08lx in user region\n",
		       __pfn_to_phys((u64)md->pfn), md->virtual);
		return;
	}

	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
	    md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
		printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
		       "overlaps vmalloc space\n",
		       __pfn_to_phys((u64)md->pfn), md->virtual);
	}

	type = &mem_types[md->type];

	addr = md->virtual & PAGE_MASK;
	phys = (unsigned long)__pfn_to_phys(md->pfn);
	length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));

	if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
		printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
		       "be mapped using pages, ignoring.\n",
		       __pfn_to_phys(md->pfn), addr);
		return;
	}

	pgd = pgd_offset_k(addr);
	end = addr + length;
	do {
		unsigned long next = pgd_addr_end(addr, end);

		alloc_init_section(pgd, addr, next, phys, type);

		phys += next - addr;
		addr = next;
	} while (pgd++, addr != end);
}

static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);

/*
 * vmalloc=size forces the vmalloc area to be exactly 'size'
 * bytes. This can be used to increase (or decrease) the vmalloc
 * area - the default is 128m.
 */
static int __init early_vmalloc(char *arg)
{
	unsigned long vmalloc_reserve = memparse(arg, NULL);

	if (vmalloc_reserve < SZ_16M) {
		vmalloc_reserve = SZ_16M;
		printk(KERN_WARNING
			"vmalloc area too small, limiting to %luMB\n",
			vmalloc_reserve >> 20);
	}

	if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
		vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
		printk(KERN_WARNING
			"vmalloc area is too big, limiting to %luMB\n",
			vmalloc_reserve >> 20);
	}

	vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
	return 0;
}
early_param("vmalloc", early_vmalloc);

static phys_addr_t lowmem_limit __initdata = SZ_1G;

static void __init sanity_check_meminfo(void)
{
	int i, j;

	lowmem_limit = __pa(vmalloc_min - 1) + 1;
	memblock_set_current_limit(lowmem_limit);

	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
		struct membank *bank = &meminfo.bank[j];
		*bank = meminfo.bank[i];
		j++;
	}
	meminfo.nr_banks = j;
}

static inline void prepare_page_table(void)
{
	unsigned long addr;
	phys_addr_t end;

	/*
	 * Clear out all the mappings below the kernel image.
	 */
	for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
		pmd_clear(pmd_off_k(addr));

	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
		pmd_clear(pmd_off_k(addr));

	/*
	 * Find the end of the first block of lowmem.
	 */
	end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
	if (end >= lowmem_limit)
		end = lowmem_limit;

	/*
	 * Clear out all the kernel space mappings, except for the first
	 * memory bank, up to the end of the vmalloc region.
	 */
	for (addr = __phys_to_virt(end);
	     addr < VMALLOC_END; addr += PGDIR_SIZE)
		pmd_clear(pmd_off_k(addr));
}

/*
 * Reserve the special regions of memory
 */
void __init uc32_mm_memblock_reserve(void)
{
	/*
	 * Reserve the page tables.  These are already in use,
	 * and can only be in node 0.
	 */
	memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
}

/*
 * Set up device the mappings.  Since we clear out the page tables for all
 * mappings above VMALLOC_END, we will remove any debug device mappings.
 * This means you have to be careful how you debug this function, or any
 * called function.  This means you can't use any function or debugging
 * method which may touch any device, otherwise the kernel _will_ crash.
 */
static void __init devicemaps_init(void)
{
	struct map_desc map;
	unsigned long addr;
	void *vectors;

	/*
	 * Allocate the vector page early.
	 */
	vectors = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
	if (!vectors)
		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
		      __func__, PAGE_SIZE, PAGE_SIZE);

	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
		pmd_clear(pmd_off_k(addr));

	/*
	 * Create a mapping for the machine vectors at the high-vectors
	 * location (0xffff0000).  If we aren't using high-vectors, also
	 * create a mapping at the low-vectors virtual address.
	 */
	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
	map.virtual = VECTORS_BASE;
	map.length = PAGE_SIZE;
	map.type = MT_HIGH_VECTORS;
	create_mapping(&map);

	/*
	 * Create a mapping for the kuser page at the special
	 * location (0xbfff0000) to the same vectors location.
	 */
	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
	map.virtual = KUSER_VECPAGE_BASE;
	map.length = PAGE_SIZE;
	map.type = MT_KUSER;
	create_mapping(&map);

	/*
	 * Finally flush the caches and tlb to ensure that we're in a
	 * consistent state wrt the writebuffer.  This also ensures that
	 * any write-allocated cache lines in the vector page are written
	 * back.  After this point, we can start to touch devices again.
	 */
	local_flush_tlb_all();
	flush_cache_all();
}

static void __init map_lowmem(void)
{
	struct memblock_region *reg;

	/* Map all the lowmem memory banks. */
	for_each_memblock(memory, reg) {
		phys_addr_t start = reg->base;
		phys_addr_t end = start + reg->size;
		struct map_desc map;

		if (end > lowmem_limit)
			end = lowmem_limit;
		if (start >= end)
			break;

		map.pfn = __phys_to_pfn(start);
		map.virtual = __phys_to_virt(start);
		map.length = end - start;
		map.type = MT_MEMORY;

		create_mapping(&map);
	}
}

/*
 * paging_init() sets up the page tables, initialises the zone memory
 * maps, and sets up the zero page, bad page and bad page tables.
 */
void __init paging_init(void)
{
	void *zero_page;

	build_mem_type_table();
	sanity_check_meminfo();
	prepare_page_table();
	map_lowmem();
	devicemaps_init();

	top_pmd = pmd_off_k(0xffff0000);

	/* allocate the zero page. */
	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
	if (!zero_page)
		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
		      __func__, PAGE_SIZE, PAGE_SIZE);

	bootmem_init();

	empty_zero_page = virt_to_page(zero_page);
	__flush_dcache_page(NULL, empty_zero_page);
}

/*
 * In order to soft-boot, we need to insert a 1:1 mapping in place of
 * the user-mode pages.  This will then ensure that we have predictable
 * results when turning the mmu off
 */
void setup_mm_for_reboot(void)
{
	unsigned long base_pmdval;
	pgd_t *pgd;
	int i;

	/*
	 * We need to access to user-mode page tables here. For kernel threads
	 * we don't have any user-mode mappings so we use the context that we
	 * "borrowed".
	 */
	pgd = current->active_mm->pgd;

	base_pmdval = PMD_SECT_WRITE | PMD_SECT_READ | PMD_TYPE_SECT;

	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
		unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
		pmd_t *pmd;

		pmd = pmd_off(pgd, i << PGDIR_SHIFT);
		set_pmd(pmd, __pmd(pmdval));
		flush_pmd_entry(pmd);
	}

	local_flush_tlb_all();
}

/*
 * Take care of architecture specific things when placing a new PTE into
 * a page table, or changing an existing PTE.  Basically, there are two
 * things that we need to take care of:
 *
 *  1. If PG_dcache_clean is not set for the page, we need to ensure
 *     that any cache entries for the kernels virtual memory
 *     range are written back to the page.
 *  2. If we have multiple shared mappings of the same space in
 *     an object, we need to deal with the cache aliasing issues.
 *
 * Note that the pte lock will be held.
 */
void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
	pte_t *ptep)
{
	unsigned long pfn = pte_pfn(*ptep);
	struct address_space *mapping;
	struct page *page;

	if (!pfn_valid(pfn))
		return;

	/*
	 * The zero page is never written to, so never has any dirty
	 * cache lines, and therefore never needs to be flushed.
	 */
	page = pfn_to_page(pfn);
	if (page == ZERO_PAGE(0))
		return;

	mapping = page_mapping_file(page);
	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
		__flush_dcache_page(mapping, page);
	if (mapping)
		if (vma->vm_flags & VM_EXEC)
			__flush_icache_all();
}