1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
|
/*
* stmark2.c -- Support for Sysam AMCORE open board
*
* (C) Copyright 2017, Angelo Dureghello <angelo@sysam.it>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi-fsl-dspi.h>
#include <linux/spi/flash.h>
#include <linux/dma-mapping.h>
#include <asm/mcfsim.h>
/*
* Partitioning of parallel NOR flash (39VF3201B)
*/
static struct mtd_partition stmark2_partitions[] = {
{
.name = "U-Boot (1024K)",
.size = 0x100000,
.offset = 0x0
}, {
.name = "Kernel+initramfs (7168K)",
.size = 0x700000,
.offset = MTDPART_OFS_APPEND
}, {
.name = "Flash Free Space (8192K)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND
}
};
static struct flash_platform_data stmark2_spi_flash_data = {
.name = "is25lp128",
.parts = stmark2_partitions,
.nr_parts = ARRAY_SIZE(stmark2_partitions),
.type = "is25lp128",
};
static struct spi_board_info stmark2_board_info[] __initdata = {
{
.modalias = "m25p80",
.max_speed_hz = 5000000,
.bus_num = 0,
.chip_select = 1,
.platform_data = &stmark2_spi_flash_data,
.mode = SPI_MODE_3,
}
};
/* SPI controller data, SPI (0) */
static struct fsl_dspi_platform_data dspi_spi0_info = {
.cs_num = 4,
.bus_num = 0,
.sck_cs_delay = 100,
.cs_sck_delay = 100,
};
static struct resource dspi_spi0_resource[] = {
[0] = {
.start = MCFDSPI_BASE0,
.end = MCFDSPI_BASE0 + 0xFF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 12,
.end = 13,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = MCF_IRQ_DSPI0,
.end = MCF_IRQ_DSPI0,
.flags = IORESOURCE_IRQ,
},
};
static u64 stmark2_dspi_mask = DMA_BIT_MASK(32);
/* SPI controller, id = bus number */
static struct platform_device dspi_spi0_device = {
.name = "fsl-dspi",
.id = 0,
.num_resources = ARRAY_SIZE(dspi_spi0_resource),
.resource = dspi_spi0_resource,
.dev = {
.platform_data = &dspi_spi0_info,
.dma_mask = &stmark2_dspi_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct platform_device *stmark2_devices[] __initdata = {
&dspi_spi0_device,
};
/*
* Note: proper pin-mux setup is mandatory for proper SPI functionality.
*/
static int __init init_stmark2(void)
{
/* DSPI0, all pins as DSPI, and using CS1 */
__raw_writeb(0x80, MCFGPIO_PAR_DSPIOWL);
__raw_writeb(0xfc, MCFGPIO_PAR_DSPIOWH);
/* Board gpio setup */
__raw_writeb(0x00, MCFGPIO_PAR_BE);
__raw_writeb(0x00, MCFGPIO_PAR_FBCTL);
__raw_writeb(0x00, MCFGPIO_PAR_CS);
__raw_writeb(0x00, MCFGPIO_PAR_CANI2C);
platform_add_devices(stmark2_devices, ARRAY_SIZE(stmark2_devices));
spi_register_board_info(stmark2_board_info,
ARRAY_SIZE(stmark2_board_info));
return 0;
}
late_initcall(init_stmark2);
|
