path: root/arch/arm64/boot/dts/broadcom/ns2.dtsi

/*
 *  BSD LICENSE
 *
 *  Copyright (c) 2015 Broadcom.  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *
 *    * Redistributions of source code must retain the above copyright
 *      notice, this list of conditions and the following disclaimer.
 *    * Redistributions in binary form must reproduce the above copyright
 *      notice, this list of conditions and the following disclaimer in
 *      the documentation and/or other materials provided with the
 *      distribution.
 *    * Neither the name of Broadcom Corporation nor the names of its
 *      contributors may be used to endorse or promote products derived
 *      from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/bcm-ns2.h>

/ {
	compatible = "brcm,ns2";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		A57_0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a57", "arm,armv8";
			reg = <0 0>;
			enable-method = "psci";
			next-level-cache = <&CLUSTER0_L2>;
		};

		A57_1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a57", "arm,armv8";
			reg = <0 1>;
			enable-method = "psci";
			next-level-cache = <&CLUSTER0_L2>;
		};

		A57_2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a57", "arm,armv8";
			reg = <0 2>;
			enable-method = "psci";
			next-level-cache = <&CLUSTER0_L2>;
		};

		A57_3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a57", "arm,armv8";
			reg = <0 3>;
			enable-method = "psci";
			next-level-cache = <&CLUSTER0_L2>;
		};

		CLUSTER0_L2: l2-cache@000 {
			compatible = "cache";
		};
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
			      IRQ_TYPE_EDGE_RISING)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
			      IRQ_TYPE_EDGE_RISING)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
			      IRQ_TYPE_EDGE_RISING)>,
			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
			      IRQ_TYPE_EDGE_RISING)>;
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&A57_0>,
				     <&A57_1>,
				     <&A57_2>,
				     <&A57_3>;
	};

	pcie0: pcie@20020000 {
		compatible = "brcm,iproc-pcie";
		reg = <0 0x20020000 0 0x1000>;

		#interrupt-cells = <1>;
		interrupt-map-mask = <0 0 0 0>;
		interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>;

		linux,pci-domain = <0>;

		bus-range = <0x00 0xff>;

		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;

		brcm,pcie-ob;
		brcm,pcie-ob-oarr-size;
		brcm,pcie-ob-axi-offset = <0x00000000>;
		brcm,pcie-ob-window-size = <256>;

		status = "disabled";

		msi-parent = <&msi0>;
		msi0: msi@20020000 {
			compatible = "brcm,iproc-msi";
			msi-controller;
			interrupt-parent = <&gic>;
			interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>,
				     <GIC_SPI 278 IRQ_TYPE_NONE>,
				     <GIC_SPI 279 IRQ_TYPE_NONE>,
				     <GIC_SPI 280 IRQ_TYPE_NONE>;
			brcm,num-eq-region = <1>;
			brcm,num-msi-msg-region = <1>;
		};
	};

	pcie4: pcie@50020000 {
		compatible = "brcm,iproc-pcie";
		reg = <0 0x50020000 0 0x1000>;

		#interrupt-cells = <1>;
		interrupt-map-mask = <0 0 0 0>;
		interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>;

		linux,pci-domain = <4>;

		bus-range = <0x00 0xff>;

		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;

		brcm,pcie-ob;
		brcm,pcie-ob-oarr-size;
		brcm,pcie-ob-axi-offset = <0x30000000>;
		brcm,pcie-ob-window-size = <256>;

		status = "disabled";

		msi-parent = <&msi4>;
		msi4: msi@50020000 {
			compatible = "brcm,iproc-msi";
			msi-controller;
			interrupt-parent = <&gic>;
			interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>,
				     <GIC_SPI 302 IRQ_TYPE_NONE>,
				     <GIC_SPI 303 IRQ_TYPE_NONE>,
				     <GIC_SPI 304 IRQ_TYPE_NONE>;
		};
	};

	soc: soc {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0 0 0xffffffff>;

		#include "ns2-clock.dtsi"

		dma0: dma@61360000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x61360000 0x1000>;
			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			#dma-channels = <8>;
			#dma-requests = <32>;
			clocks = <&iprocslow>;
			clock-names = "apb_pclk";
		};

		smmu: mmu@64000000 {
			compatible = "arm,mmu-500";
			reg = <0x64000000 0x40000>;
			#global-interrupts = <2>;
			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
			mmu-masters;
		};

		pinctrl: pinctrl@6501d130 {
			compatible = "brcm,ns2-pinmux";
			reg = <0x6501d130 0x08>,
			      <0x660a0028 0x04>,
			      <0x660009b0 0x40>;
		};

		gpio_aon: gpio@65024800 {
			compatible = "brcm,iproc-gpio";
			reg = <0x65024800 0x50>,
			      <0x65024008 0x18>;
			ngpios = <6>;
			#gpio-cells = <2>;
			gpio-controller;
		};

		gic: interrupt-controller@65210000 {
			compatible = "arm,gic-400";
			#interrupt-cells = <3>;
			interrupt-controller;
			reg = <0x65210000 0x1000>,
			      <0x65220000 0x1000>,
			      <0x65240000 0x2000>,
			      <0x65260000 0x1000>;
			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
				      IRQ_TYPE_LEVEL_HIGH)>;
		};

		cci@65590000 {
			compatible = "arm,cci-400";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x65590000 0x1000>;
			ranges = <0 0x65590000 0x10000>;

			pmu@9000 {
				compatible = "arm,cci-400-pmu,r1",
					     "arm,cci-400-pmu";
				reg = <0x9000 0x4000>;
				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
			};
		};

		mdio_mux_iproc: mdio-mux@6602023c {
			compatible = "brcm,mdio-mux-iproc";
			reg = <0x6602023c 0x14>;
			#address-cells = <1>;
			#size-cells = <0>;

			mdio@0 {
				reg = <0x0>;
				#address-cells = <1>;
				#size-cells = <0>;

				pci_phy0: pci-phy@0 {
					compatible = "brcm,ns2-pcie-phy";
					reg = <0x0>;
					#phy-cells = <0>;
					status = "disabled";
				};
			};

			mdio@7 {
				reg = <0x7>;
				#address-cells = <1>;
				#size-cells = <0>;

				pci_phy1: pci-phy@0 {
					compatible = "brcm,ns2-pcie-phy";
					reg = <0x0>;
					#phy-cells = <0>;
					status = "disabled";
				};
			};

			mdio@10 {
				reg = <0x10>;
				#address-cells = <1>;
				#size-cells = <0>;
			};
		};

		timer0: timer@66030000 {
			compatible = "arm,sp804", "arm,primecell";
			reg = <0x66030000 0x1000>;
			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>,
				 <&iprocslow>,
				 <&iprocslow>;
			clock-names = "timer1", "timer2", "apb_pclk";
		};

		timer1: timer@66040000 {
			compatible = "arm,sp804", "arm,primecell";
			reg = <0x66040000 0x1000>;
			interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>,
				 <&iprocslow>,
				 <&iprocslow>;
			clock-names = "timer1", "timer2", "apb_pclk";
		};

		timer2: timer@66050000 {
			compatible = "arm,sp804", "arm,primecell";
			reg = <0x66050000 0x1000>;
			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>,
				 <&iprocslow>,
				 <&iprocslow>;
			clock-names = "timer1", "timer2", "apb_pclk";
		};

		timer3: timer@66060000 {
			compatible = "arm,sp804", "arm,primecell";
			reg = <0x66060000 0x1000>;
			interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>,
				 <&iprocslow>,
				 <&iprocslow>;
			clock-names = "timer1", "timer2", "apb_pclk";
		};

		i2c0: i2c@66080000 {
			compatible = "brcm,iproc-i2c";
			reg = <0x66080000 0x100>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
			clock-frequency = <100000>;
			status = "disabled";
		};

		wdt0: watchdog@66090000 {
			compatible = "arm,sp805", "arm,primecell";
			reg = <0x66090000 0x1000>;
			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>, <&iprocslow>;
			clock-names = "wdogclk", "apb_pclk";
		};

		gpio_g: gpio@660a0000 {
			compatible = "brcm,iproc-gpio";
			reg = <0x660a0000 0x50>;
			ngpios = <32>;
			#gpio-cells = <2>;
			gpio-controller;
			interrupt-controller;
			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
		};

		i2c1: i2c@660b0000 {
			compatible = "brcm,iproc-i2c";
			reg = <0x660b0000 0x100>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
			clock-frequency = <100000>;
			status = "disabled";
		};

		uart0: serial@66100000 {
			compatible = "snps,dw-apb-uart";
			reg = <0x66100000 0x100>;
			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>;
			reg-shift = <2>;
			reg-io-width = <4>;
			status = "disabled";
		};

		uart1: serial@66110000 {
			compatible = "snps,dw-apb-uart";
			reg = <0x66110000 0x100>;
			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>;
			reg-shift = <2>;
			reg-io-width = <4>;
			status = "disabled";
		};

		uart2: serial@66120000 {
			compatible = "snps,dw-apb-uart";
			reg = <0x66120000 0x100>;
			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>;
			reg-shift = <2>;
			reg-io-width = <4>;
			status = "disabled";
		};

		uart3: serial@66130000 {
			compatible = "snps,dw-apb-uart";
			reg = <0x66130000 0x100>;
			interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
			reg-shift = <2>;
			reg-io-width = <4>;
			clocks = <&osc>;
			status = "disabled";
		};

		ssp0: ssp@66180000 {
			compatible = "arm,pl022", "arm,primecell";
			reg = <0x66180000 0x1000>;
			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>, <&iprocslow>;
			clock-names = "spiclk", "apb_pclk";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		ssp1: ssp@66190000 {
			compatible = "arm,pl022", "arm,primecell";
			reg = <0x66190000 0x1000>;
			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>, <&iprocslow>;
			clock-names = "spiclk", "apb_pclk";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		hwrng: hwrng@66220000 {
			compatible = "brcm,iproc-rng200";
			reg = <0x66220000 0x28>;
		};

		sata_phy: sata_phy@663f0100 {
			compatible = "brcm,iproc-ns2-sata-phy";
			reg = <0x663f0100 0x1f00>,
			      <0x663f004c 0x10>;
			reg-names = "phy", "phy-ctrl";
			#address-cells = <1>;
			#size-cells = <0>;

			sata_phy0: sata-phy@0 {
				reg = <0>;
				#phy-cells = <0>;
				status = "disabled";
			};

			sata_phy1: sata-phy@1 {
				reg = <1>;
				#phy-cells = <0>;
				status = "disabled";
			};
		};

		sata: ahci@663f2000 {
			compatible = "brcm,iproc-ahci", "generic-ahci";
			reg = <0x663f2000 0x1000>;
			reg-names = "ahci";
			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";

			sata0: sata-port@0 {
				reg = <0>;
				phys = <&sata_phy0>;
				phy-names = "sata-phy";
			};

			sata1: sata-port@1 {
				reg = <1>;
				phys = <&sata_phy1>;
				phy-names = "sata-phy";
			};
		};

		sdio0: sdhci@66420000 {
			compatible = "brcm,sdhci-iproc-cygnus";
			reg = <0x66420000 0x100>;
			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
			bus-width = <8>;
			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
			status = "disabled";
		};

		sdio1: sdhci@66430000 {
			compatible = "brcm,sdhci-iproc-cygnus";
			reg = <0x66430000 0x100>;
			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
			bus-width = <8>;
			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
			status = "disabled";
		};

		nand: nand@66460000 {
			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
			reg = <0x66460000 0x600>,
			      <0x67015408 0x600>,
			      <0x66460f00 0x20>;
			reg-names = "nand", "iproc-idm", "iproc-ext";
			interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;

			#address-cells = <1>;
			#size-cells = <0>;

			brcm,nand-has-wp;
		};
	};
};