1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/phy/phy-cadence-sierra.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Cadence Sierra PHY binding
description:
This binding describes the Cadence Sierra PHY. Sierra PHY supports multilink
multiprotocol combinations including protocols such as PCIe, USB etc.
maintainers:
- Swapnil Jakhade <sjakhade@cadence.com>
- Yuti Amonkar <yamonkar@cadence.com>
properties:
compatible:
enum:
- cdns,sierra-phy-t0
- ti,sierra-phy-t0
'#address-cells':
const: 1
'#size-cells':
const: 0
'#clock-cells':
const: 1
resets:
minItems: 1
maxItems: 2
items:
- description: Sierra PHY reset.
- description: Sierra APB reset. This is optional.
reset-names:
minItems: 1
maxItems: 2
items:
- const: sierra_reset
- const: sierra_apb
reg:
maxItems: 1
description:
Offset of the Sierra PHY configuration registers.
reg-names:
const: serdes
clocks:
minItems: 2
maxItems: 4
clock-names:
minItems: 2
items:
- const: cmn_refclk_dig_div
- const: cmn_refclk1_dig_div
- const: pll0_refclk
- const: pll1_refclk
assigned-clocks:
minItems: 1
maxItems: 2
assigned-clock-parents:
minItems: 1
maxItems: 2
cdns,autoconf:
type: boolean
description:
A boolean property whose presence indicates that the PHY registers will be
configured by hardware. If not present, all sub-node optional properties
must be provided.
patternProperties:
'^phy@[0-9a-f]$':
type: object
description:
Each group of PHY lanes with a single master lane should be represented as
a sub-node. Note that the actual configuration of each lane is determined
by hardware strapping, and must match the configuration specified here.
properties:
reg:
description:
The master lane number. This is the lowest numbered lane in the lane group.
minimum: 0
maximum: 15
resets:
minItems: 1
maxItems: 4
description:
Contains list of resets, one per lane, to get all the link lanes out of reset.
"#phy-cells":
const: 0
cdns,phy-type:
description:
Specifies the type of PHY for which the group of PHY lanes is used.
Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4]
cdns,num-lanes:
description:
Number of lanes in this group. The group is made up of consecutive lanes.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 16
required:
- reg
- resets
- "#phy-cells"
additionalProperties: false
required:
- compatible
- "#address-cells"
- "#size-cells"
- reg
- resets
- reset-names
additionalProperties: false
examples:
- |
#include <dt-bindings/phy/phy.h>
bus {
#address-cells = <2>;
#size-cells = <2>;
sierra-phy@fd240000 {
compatible = "cdns,sierra-phy-t0";
reg = <0x0 0xfd240000 0x0 0x40000>;
resets = <&phyrst 0>, <&phyrst 1>;
reset-names = "sierra_reset", "sierra_apb";
clocks = <&cmn_refclk_dig_div>, <&cmn_refclk1_dig_div>;
clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
#address-cells = <1>;
#size-cells = <0>;
pcie0_phy0: phy@0 {
reg = <0>;
resets = <&phyrst 2>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
};
pcie0_phy1: phy@2 {
reg = <2>;
resets = <&phyrst 4>;
cdns,num-lanes = <1>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
};
};
};
|
