summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/pstore
AgeCommit message (Collapse)Author
2020-05-30pstore/platform: Use backend name for console registrationKees Cook
If the pstore backend changes, there's no indication in the logs what the console is (it always says "pstore"). Instead, pass through the active backend's name. (Also adjust the selftest to match.) Link: https://lore.kernel.org/lkml/20200510202436.63222-5-keescook@chromium.org/ Link: https://lore.kernel.org/lkml/20200526135429.GQ12456@shao2-debian Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 472Thomas Gleixner
Based on 1 normalized pattern(s): released under the terms of the gpl v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081203.398003637@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-18selftests: pstore: return Kselftest Skip code for skipped testsShuah Khan (Samsung OSG)
When pstore_post_reboot test gets skipped because of unmet dependencies and/or unsupported configuration, it returns 0 which is treated as a pass by the Kselftest framework. This leads to false positive result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-02-13selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=mNaresh Kamboju
pstore_tests and pstore_post_reboot_tests need CONFIG_PSTORE_RAM=m Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-02selftests: pstore: add .gitignore for generated filesShuah Khan
Add .gitignore for generated files. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-05selftests: add EXTRA_CLEAN for clean targetbamvor.zhangjian@huawei.com
Some testcases need the clean extra data after running. This patch introduce the "EXTRA_CLEAN" variable to address this requirement. After KBUILD_OUTPUT is enabled in later patch, it will be easy to decide to if we need do the cleanup in the KBUILD_OUTPUT path(if the testcase ran immediately after compiled). Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-02-25selftests: create test-specific kconfig fragmentsBamvor Jian Zhang
Create the config file in each directory of testcase which need more kernel configuration than the default defconfig. User could use these configs with merge_config.sh script: Enable config for specific testcase: (export ARCH=xxx #for cross compiling) ./scripts/kconfig/merge_config.sh .config \ tools/testing/selftests/xxx/config Enable configs for all testcases: (export ARCH=xxx #for cross compiling) ./scripts/kconfig/merge_config.sh .config \ tools/testing/selftests/*/config Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-10-15selftests/pstore: add pstore test scripts going with rebootHiraku Toyooka
To test pstore in earnest, we have to cause kernel crash and check pstore filesystem after reboot. We add two scripts: - pstore_crash_test This script causes kernel crash and reboot. It is executed by 'make run_pstore_crash' in selftests. It can also be used with kdump. - pstore_post_reboot_tests This script includes test cases which check pstore's behavior after crash and reboot. It is executed together with pstore_tests by 'make run_tests [-C pstore]' in selftests. The test cases in pstore_post_reboot_tests are currently following. - Check pstore backend is registered - Mount pstore filesystem - Check dmesg/console/pmsg files exist in pstore filesystem - Check dmesg/console files contain oops end marker - Check pmsg file properly keeps the content written before crash - Remove all files in pstore filesystem Example usage is following. (before reboot) # cd /path/to/selftests # make run_tests -C pstore === Pstore unit tests (pstore_tests) === UUID=b49b02cf-b0c2-4309-be43-b08c3971e37f ... selftests: pstore_tests [PASS] === Pstore unit tests (pstore_post_reboot_tests) === UUID=953eb1bc-8e03-48d7-b27a-6552b24c5b7e Checking pstore backend is registered ... ok backend=ramoops cmdline=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=768M ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000 pstore_crash_test has not been executed yet. we skip further tests. selftests: pstore_post_reboot_tests [PASS] # make run_pstore_crash === Pstore unit tests (pstore_crash_test) === UUID=93c8972d-1466-430b-8c4a-28d8681e74c6 Checking pstore backend is registered ... ok backend=ramoops cmdline=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=768M ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000 Causing kernel crash ... (kernel crash and reboot) ... (after reboot) # make run_tests -C pstore === Pstore unit tests (pstore_tests) === UUID=8e511e77-2285-499f-8bc0-900d9af1fbcc ... selftests: pstore_tests [PASS] === Pstore unit tests (pstore_post_reboot_tests) === UUID=2dcc2132-4f3c-45aa-a38f-3b54bff8cef1 Checking pstore backend is registered ... ok backend=ramoops cmdline=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=768M ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000 Mounting pstore filesystem ... ok Checking dmesg files exist in pstore filesystem ... ok dmesg-ramoops-0 dmesg-ramoops-1 Checking console files exist in pstore filesystem ... ok console-ramoops-0 Checking pmsg files exist in pstore filesystem ... ok pmsg-ramoops-0 Checking dmesg files contain oops end marker dmesg-ramoops-0 ... ok dmesg-ramoops-1 ... ok Checking console file contains oops end marker ... ok Checking pmsg file properly keeps the content written before crash ... ok Removing all files in pstore filesystem console-ramoops-0 ... ok dmesg-ramoops-0 ... ok dmesg-ramoops-1 ... ok pmsg-ramoops-0 ... ok selftests: pstore_post_reboot_tests [PASS] Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Seiji Aguchi <seiji.aguchi.tr@hitachi.com> Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-10-15selftests/pstore: add pstore test script for pre-rebootHiraku Toyooka
The pstore_tests script includes test cases which check pstore's behavior before crash (and reboot). The test cases are currently following. - Check pstore backend is registered - Check pstore console is registered - Check /dev/pmsg0 exists - Write unique string to /dev/pmsg0 The unique string written to /dev/pmsg includes UUID. The UUID is also left in 'uuid' file in order to enable us to check if the pmsg keeps the string correctly after reboot. Example usage is following. # cd /path/to/selftests # make run_tests -C pstore (or just .pstore/pstore_tests) make: Entering directory '/path/to/selftests/pstore' === Pstore unit tests (pstore_tests) === UUID=b49b02cf-b0c2-4309-be43-b08c3971e37f Checking pstore backend is registered ... ok backend=ramoops cmdline=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=768M ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000 Checking pstore console is registered ... ok Checking /dev/pmsg0 exists ... ok Writing unique string to /dev/pmsg0 ... ok selftests: pstore_tests [PASS] make: Leaving directory '/path/to/selftests/pstore' We can also see test logs later. # cat pstore/logs/20151001-072718_b49b02cf-b0c2-4309-be43-b08c3971e37f/pstore_tests.log Thu Oct 1 07:27:18 UTC 2015 === Pstore unit tests (pstore_tests) === UUID=b49b02cf-b0c2-4309-be43-b08c3971e37f Checking pstore backend is registered ... ok backend=ramoops cmdline=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=768M ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000 Checking pstore console is registered ... ok Checking /dev/pmsg0 exists ... ok Writing unique string to /dev/pmsg0 ... ok Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Seiji Aguchi <seiji.aguchi.tr@hitachi.com> Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>