| Age | Commit message (Collapse) | Author |
|---|
|
In LBR call stack mode, the depth of reconstructed LBR call stack limits
to the number of LBR registers.
For example, on skylake, the depth of reconstructed LBR call stack is
always <= 32.
# To display the perf.data header info, please use
# --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 6K of event 'cycles'
# Event count (approx.): 6487119731
#
# Children Self Command Shared Object Symbol
# ........ ........ ............... ..................
# ................................
99.97% 99.97% tchain_edit tchain_edit [.] f43
|
--99.64%--f11
f12
f13
f14
f15
f16
f17
f18
f19
f20
f21
f22
f23
f24
f25
f26
f27
f28
f29
f30
f31
f32
f33
f34
f35
f36
f37
f38
f39
f40
f41
f42
f43
For a call stack which is deeper than LBR limit, HW will overwrite the
LBR register with oldest branch. Only partial call stacks can be
reconstructed.
However, the overwritten LBRs may still be retrieved from previous
sample. At that moment, HW hasn't overwritten the LBR registers yet.
Perf tools can stitch those overwritten LBRs on current call stacks to
get a more complete call stack.
To determine if LBRs can be stitched, perf tools need to compare current
sample with previous sample.
- They should have identical LBR records (Same from, to and flags
values, and the same physical index of LBR registers).
- The searching starts from the base-of-stack of current sample.
Once perf determines to stitch the previous LBRs, the corresponding LBR
cursor nodes will be copied to 'lists'. The 'lists' is to track the LBR
cursor nodes which are going to be stitched.
When the stitching is over, the nodes will not be freed immediately.
They will be moved to 'free_lists'. Next stitching may reuse the space.
Both 'lists' and 'free_lists' will be freed when all samples are
processed.
Committer notes:
Fix the intel-pt.c initialization of the union with 'struct
branch_flags', that breaks the build with its unnamed union on older gcc
versions.
Uninline thread__free_stitch_list(), as it grew big and started dragging
includes to thread.h, so move it to thread.c where what it needs in
terms of headers are already there.
This fixes the build in several systems such as debian:experimental when
cross building to the MIPS32 architecture, i.e. in the other cases what
was needed was being included by sheer luck.
In file included from builtin-sched.c:11:
util/thread.h: In function 'thread__free_stitch_list':
util/thread.h:169:3: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration]
169 | free(pos);
| ^~~~
util/thread.h:169:3: error: incompatible implicit declaration of built-in function 'free' [-Werror]
util/thread.h:19:1: note: include '<stdlib.h>' or provide a declaration of 'free'
18 | #include "callchain.h"
+++ |+#include <stdlib.h>
19 |
util/thread.h:174:3: error: incompatible implicit declaration of built-in function 'free' [-Werror]
174 | free(pos);
| ^~~~
util/thread.h:174:3: note: include '<stdlib.h>' or provide a declaration of 'free'
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-13-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To retrieve the overwritten LBRs from previous sample for LBR stitching
approach, perf has to save the previous sample.
Only allocate the struct lbr_stitch once, when LBR stitching approach is
enabled and kernel supports hw_idx.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-11-kan.liang@linux.intel.com
[ Use zalloc()/zfree() for thread->lbr_stitch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The LBR stitch approach should be disabled by default. Because
- The stitching approach base on LBR call stack technology. The known
limitations of LBR call stack technology still apply to the approach,
e.g. Exception handing such as setjmp/longjmp will have calls/returns
not match.
- This approach is not foolproof. There can be cases where it creates
incorrect call stacks from incorrect matches. There is no attempt to
validate any matches in another way.
The 'lbr_stitch_enable' is used to indicate whether enable LBR stitch
approach, which is disabled by default. The following patch will
introduce a new option for each tools to enable the LBR stitch
approach.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-10-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-69vcr8pubpym90skxhmbwhiw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
And pick the shortest name: 'struct maps'.
The split existed because we used to have two groups of maps, one for
functions and one for variables, but that only complicated things,
sometimes we needed to figure out what was at some address and then had
to first try it on the functions group and if that failed, fall back to
the variables one.
That split is long gone, so for quite a while we had only one struct
maps per struct map_groups, simplify things by combining those structs.
First patch is the minimum needed to merge both, follow up patches will
rename 'thread->mg' to 'thread->maps', etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hom6639ro7020o708trhxh59@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To reduce boilerplate, provide a more compact form using an idiom
present in other trees of data structures.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-59gmq4kg1r68ou1wknyjl78x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So that we can reduce the header dependency tree further, in the process
noticed that lots of places were getting even things like build-id
routines and 'struct perf_tool' definition indirectly, so fix all those
too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With the movement of lots of stuff out of perf.h to other headers we
ended up not needing it in lots of places, remove it from those places.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c718m0sxxwp73lp9d8vpihb4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Even more, to have a "perf_record_" prefix, so that they match the
PERF_RECORD_ enum they map to.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-qbabmcz2a0pkzt72liyuz3p8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit e5adfc3e7e77 ("perf map: Synthesize maps only for thread group
leader") changed the recording side so that we no longer get mmap events
for threads other than the thread group leader (when synthesising these
events for threads which exist before perf is started).
When a file recorded after this change is loaded, the lack of mmap
records mean that unwinding is not set up for any other threads.
This can be seen in a simple record/report scenario:
perf record --call-graph=dwarf -t $TID
perf report
If $TID is a process ID then the report will show call graphs, but if
$TID is a secondary thread the output is as if --call-graph=none was
specified.
Following the rationale in that commit, move the libunwind fields into
struct map_groups and update the libunwind functions to take this
instead of the struct thread. This is only required for
unwind__finish_access which must now be called from map_groups__delete
and the others are changed for symmetry.
Note that unwind__get_entries keeps the thread argument since it is
required for symbol lookup and the libdw unwind provider uses the thread
ID.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: e5adfc3e7e77 ("perf map: Synthesize maps only for thread group leader")
Link: http://lkml.kernel.org/r/20190815100146.28842-2-john@metanate.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Threads synthesized from /proc have comms with a start time of zero, and
not marked as "exec". Currently, there can be 2 such comms. The first is
created by processing a synthesized fork event and is set to the
parent's comm string, and the second by processing a synthesized comm
event set to the thread's current comm string.
In the absence of an "exec" comm, thread__exec_comm() picks the last
(oldest) comm, which, in the case above, is the parent's comm string.
For a main thread, that is very probably wrong. Use the second-to-last
in that case.
This affects only db-export because it is the only user of
thread__exec_comm().
Example:
$ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1
$ sudo chown ahunter pt-a-sleep-1
Before:
$ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls
$ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view'
comm_id command thread_id pid tid
---------- ---------- ---------- ---------- ----------
1 swapper 1 0 0
2 rcu_sched 2 10 10
3 kthreadd 3 78 78
5 sudo 4 15180 15180
5 sudo 5 15180 15182
7 kworker/4: 6 10335 10335
8 kthreadd 7 55 55
10 systemd 8 865 865
10 systemd 9 865 875
13 perf 10 15181 15181
15 sleep 10 15181 15181
16 kworker/3: 11 14179 14179
17 kthreadd 12 29376 29376
19 systemd 13 746 746
21 systemd 14 401 401
23 systemd 15 879 879
23 systemd 16 879 945
25 kthreadd 17 556 556
27 kworker/u1 18 14136 14136
28 kworker/u1 19 15021 15021
29 kthreadd 20 509 509
31 systemd 21 836 836
31 systemd 22 836 967
33 systemd 23 1148 1148
33 systemd 24 1148 1163
35 kworker/2: 25 17988 17988
36 kworker/0: 26 13478 13478
After:
$ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls
$ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view'
comm_id command thread_id pid tid
---------- ---------- ---------- ---------- ----------
1 swapper 1 0 0
2 rcu_sched 2 10 10
3 kswapd0 3 78 78
4 perf 4 15180 15180
4 perf 5 15180 15182
6 kworker/4: 6 10335 10335
7 kcompactd0 7 55 55
8 accounts-d 8 865 865
8 accounts-d 9 865 875
10 perf 10 15181 15181
12 sleep 10 15181 15181
13 kworker/3: 11 14179 14179
14 kworker/1: 12 29376 29376
15 haveged 13 746 746
16 systemd-jo 14 401 401
17 NetworkMan 15 879 879
17 NetworkMan 16 879 945
19 irq/131-iw 17 556 556
20 kworker/u1 18 14136 14136
21 kworker/u1 19 15021 15021
22 kworker/u1 20 509 509
23 thermald 21 836 836
23 thermald 22 836 967
25 unity-sett 23 1148 1148
25 unity-sett 24 1148 1163
27 kworker/2: 25 17988 17988
28 kworker/0: 26 13478 13478
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec")
Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To allow for destructors to check if they're operating on a object still
in a list, and to avoid going from use after free list entries into
still valid, or even also other already removed from list entries.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-deh17ub44atyox3j90e6rksu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Threads are created when we either synthesize PERF_RECORD_FORK events
for pre-existing threads or when we receive PERF_RECORD_FORK events from
the kernel as new threads get created.
We then keep them in machine->threads[].entries rb trees till when we
receive a PERF_RECORD_EXIT, i.e. that thread terminated.
The thread object has a reference count that is grabbed when, for
instance, we keep that thread referenced in struct hist_entry, in 'perf
report' and 'perf top'.
When we receive a PERF_RECORD_EXIT we remove the thread object from the
rb tree and move it to the corresponding machine->threads[].dead list,
then we do a thread__put(), dropping the reference we had for keeping it
in the rb tree.
In thread__put() we were assuming that when the reference count hit zero
we should remove it from the dead list by simply doing a
list_del_init(&thread->node).
That works well when all the thread lifetime is during the machine that
has the list heads lifetime, since we know that we can do the
list_del_init() and it will update the 'dead' list_head.
But in 'perf sched lat' we were doing:
machine__new() (via perf_session__new)
process events, grabbing refcounts to keep those thread objects
in 'perf sched' local data structures.
machine__exit() (via perf_session__delete) which would delete the
'dead' list heads.
And then doing the final thread__put() for the refcounts 'perf sched'
rightfully obtained for keeping those thread object references.
b00m, since thread__put() would do the list_del_init() touching
a dead dead list head.
Fix it by removing all the dead threads from machine->threads[].dead at
machine__exit(), since whatever is there should have refcounts taken by
things like 'perf sched lat', and make thread__put() check if the thread
is in a linked list before removing it from that list.
Reported-by: Wei Li <liwei391@huawei.com>
Link: https://lkml.kernel.org/r/20190508143648.8153-1-liwei391@huawei.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhipeng Xie <xiezhipeng1@huawei.com>
Link: https://lkml.kernel.org/r/20190704194355.GI10740@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The namespaces and comm fields of a thread are protected by rwsem and
require write access for it. So it ended up using a cast to remove
the const qualifier. Let's get rid of the const then.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Link: http://lkml.kernel.org/r/20190527061149.168640-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It seems that the current code lacks holding the namespace lock in
thread__namespaces(). Otherwise it can see inconsistent results.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Link: http://lkml.kernel.org/r/20190522053250.207156-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When compiled with libunwind, perf does some preparatory work when
processing side-band events. This is not needed when report actually
don't unwind dwarf callchains, so it's disabled with
dwarf_callchain_users bool.
However we could move that check to higher level and shield more
unwanted code for normal report processing, giving us following speed up
on kernel build profile:
Before:
$ perf record make -j40
...
$ ll ../../perf.data
-rw-------. 1 jolsa jolsa 461783932 Apr 26 09:11 perf.data
$ perf stat -e cycles:u,instructions:u perf report -i perf.data > out
Performance counter stats for 'perf report -i perf.data':
78,669,920,155 cycles:u
99,076,431,951 instructions:u # 1.26 insn per cycle
55.382823668 seconds time elapsed
27.512341000 seconds user
27.712871000 seconds sys
After:
$ perf stat -e cycles:u,instructions:u perf report -i perf.data > out
Performance counter stats for 'perf report -i perf.data':
59,626,798,904 cycles:u
88,583,575,849 instructions:u # 1.49 insn per cycle
21.296935559 seconds time elapsed
20.010191000 seconds user
1.202935000 seconds sys
The speed is higher with profile having many side-band events,
because these trigger libunwind preparatory code.
This does not apply for perf compiled with libdw for dwarf unwind,
only for build with libunwind.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190426073804.17238-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
intel-bts code
Add a utility function to fetch executable code. Convert one
user over to it. There are more places doing that, but they
do significantly different actions, so they are not
easy to fit into a single library function.
Committer changes:
. No need to cast around, make 'buf' be a void pointer.
. Rename it to thread__memcpy() to reflect the fact it is about copying
a chunk of memory from a thread, i.e. from its address space.
. No need to have it in a separate object file, move it to thread.[ch]
. Check the return of map__load(), the original code didn't do it, but
since we're moving this around, check that as well.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20190305144758.12397-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Several places were using definitions found in symbols.h but not
including it, getting it by sheer luck from some other headers that now
are in the process of removing that include because they don't need it
or because simply having struct forward declarations is enough, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xbcvvx296d70kpg9wb0qmeq9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When looking at PT or brstackinsn traces with 'perf script' it can be
very useful to see the source code. This adds a simple facility to print
them with 'perf script', if the information is available through dwarf
% perf record ...
% perf script -F insn,ip,sym,srccode
...
4004c6 main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004c6 main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004b3 main
6 v++;
% perf record -b ...
% perf script -F insn,ip,sym,srccode,brstackinsn
...
main+22:
0000000000400543 insn: e8 ca ff ff ff # PRED
|18 f1();
f1:
0000000000400512 insn: 55
|10 {
0000000000400513 insn: 48 89 e5
0000000000400516 insn: b8 00 00 00 00
|11 f2();
000000000040051b insn: e8 d6 ff ff ff # PRED
f2:
00000000004004f6 insn: 55
|5 {
00000000004004f7 insn: 48 89 e5
00000000004004fa insn: 8b 05 2c 0b 20 00
|6 c = a / b;
0000000000400500 insn: 8b 0d 2a 0b 20 00
0000000000400506 insn: 99
0000000000400507 insn: f7 f9
0000000000400509 insn: 89 05 29 0b 20 00
000000000040050f insn: 90
|7 }
0000000000400510 insn: 5d
0000000000400511 insn: c3 # PRED
f1+14:
0000000000400520 insn: b8 00 00 00 00
|12 f2();
0000000000400525 insn: e8 cc ff ff ff # PRED
f2:
00000000004004f6 insn: 55
|5 {
00000000004004f7 insn: 48 89 e5
00000000004004fa insn: 8b 05 2c 0b 20 00
|6 c = a / b;
Not supported for callchains currently, would need some layout changes
there.
Committer notes:
Fixed the build on Alpine Linux (3.4 .. 3.8) by addressing this
warning:
In file included from util/srccode.c:19:0:
/usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
#warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
^~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181204001848.24769-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When synthesizing FORK events, we are trying to create thread objects
for the already running tasks on the machine.
Normally, for a kernel FORK event, we want to clone the parent's maps
because that is what the kernel just did.
But when synthesizing, this should not be done. If we do, we end up
with overlapping maps as we process the sythesized MMAP2 events that
get delivered shortly thereafter.
Use the FORK event misc flags in an internal way to signal this
situation, so we can elide the map clone when appropriate.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/20181030.222404.2085088822877051075.davem@davemloft.net
[ Added comment about flag use in machine__process_fork_event(),
use ternary op in thread__clone_map_groups() as suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove the split of symbol tables for data (MAP__VARIABLE) and for
functions (MAP__FUNCTION), its unneeded and there were various places
doing two lookups to find a symbol, so simplify this.
We still will consider only the symbols that matched the filters in
place, i.e. see the (elf_(sec,sym)|symbol_type)__filter() routines in
the patch, just so that we consider only the same symbols as before,
to reduce the possibility of regressions.
All the tests on 50-something build environments, in varios versions
of lots of distros and cross build environments were performed without
build regressions, as usual with all pull requests the other tests were
also performed: 'perf test' and 'make -C tools/perf build-test'.
Also this was done at a great granularity so that regressions can be
bisected more easily.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hiq0fy2rsleupnqqwuojo1ne@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
All callers are for MAP__FUNCTION, so just ditch it and use
thread__find_symbol(), that already ditched MAP__FUNCTION, i.e.
internally uses it till we ditch it for good.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-i0ocxs00b4a0tlrx31lyh2cs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Out of thread__find_addr_location(..., MAP__FUNCTION, ...), idea here is to
continue removing references to MAP__{FUNCTION,VARIABLE} ahead of
getting both types of symbols in the same rbtree, as various places do
two lookups, looking first at MAP__FUNCTION, then at MAP__VARIABLE.
So thread__find_symbol() will eventually do just that, and 'struct
symbol' will have the symbol type, for code that cares about that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-n7528en9e08yd3flzmb26tth@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Conflicts:
tools/perf/arch/arm/annotate/instructions.c
tools/perf/arch/arm64/annotate/instructions.c
tools/perf/arch/powerpc/annotate/instructions.c
tools/perf/arch/s390/annotate/instructions.c
tools/perf/arch/x86/tests/intel-cqm.c
tools/perf/ui/tui/progress.c
tools/perf/util/zlib.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add two locks to protect namespaces_list and comm_list.
The lock is only needed for multithreaded code, so using mutex wrappers
provided by perf tool.
Not all the comm_list/namespaces_list accessing are protected, e.g.
thread__exec_comm. Because the multithread code for perf top event
synthesizing does not touch them. They don't need a lock.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1506696477-146932-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Andi reported a performance drop in single threaded perf tools such as
'perf script' due to the growing number of locks being put in place to
allow for multithreaded tools, so wrap the POSIX threads rwlock routines
with the names used for such kinds of locks in the Linux kernel and then
allow for tools to ask for those locks to be used or not.
I.e. a tool may have a multithreaded phase and then switch to single
threaded, like the upcoming patches for the synthesizing of
PERF_RECORD_{FORK,MMAP,etc} for pre-existing processes to then switch to
single threaded mode in 'perf top'.
The init routines will not be conditional, this way starting as single
threaded to then move to multi threaded mode should be possible.
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170404161739.GH12903@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Teach perf how to resolve symbols from binaries that are in a different
mount namespace from the tool. This allows perf to generate meaningful
stack traces even if the binary resides in a different mount namespace
from the tool.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-2-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.
Committer notes:
Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.
Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:
util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
^
Testing it:
# perf record --namespaces -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
#
# perf report -D
<SNIP>
3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
0x1151e0 [0x30]: event: 9
.
. ... raw event: size 48 bytes
. 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h....
. 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c....
. 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................
<SNIP>
NAMESPACES events: 1
<SNIP>
#
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-9-git-send-email-elena.reshetova@intel.com
[ Did missing conversion in __machine__remove_thread() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Experimenting a bit using cppcheck[1], a static checker brought to my
attention by Colin, reducing the scope of some variables, reducing the
line of source code lines in the process:
$ cppcheck --enable=style tools/perf/util/thread.c
Checking tools/perf/util/thread.c...
[tools/perf/util/thread.c:17]: (style) The scope of the variable 'leader' can be reduced.
[tools/perf/util/thread.c:133]: (style) The scope of the variable 'err' can be reduced.
[tools/perf/util/thread.c:273]: (style) The scope of the variable 'err' can be reduced.
Will continue later, but these are already useful, keep them.
1: https://sourceforge.net/p/cppcheck/wiki/Home/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ixws7lbycihhpmq9cc949ti6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently we call unwind__prepare_access for map event. In case we
report fork event the thread inherits its parent's maps and
unwind__prepare_access is never called for the thread.
This causes unwind__get_entries seeing uninitialized
unwind_libunwind_ops and thus returning no callchain.
Adding unwind__prepare_access calls for fork even processing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding initialized arg into unwind__prepare_access to get feedback about
the initialization state.
It's not possible to get it from error code, because we return 0 even in
case we don't recognize dso, which is valid.
The 'initialized' value is used in following patch to speedup
unwind__prepare_access calls logic in fork path.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-4-git-send-email-jolsa@kernel.org
[ Remove ; after static inline function signatures, fixes build break ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, 'perf script' uses host unwind methods to parse perf.data
callchain info without taking the target architecture into account, i.e.
assuming the perf.data file was generated on the same machine where the
analysis is being performed. So we get wrong result without any warnings
when unwinding callchains of x86(32-bit) on x86(64-bit) machine.
This patch adds an extra step that checks the target platform before
assigning unwind methods. In later patches in this series, we can use
this info to assign the right unwind methods for supported platforms.
Committer note:
After fixing it to register the local unwinder for live mode tools
('perf trace', 'perf top'), i.e. tools that don't use a perf.data file,
it works as intended and passes the 'perf test unwind' test:
# perf trace -e nanosleep --call dwarf usleep 1
0.328 ( 0.058 ms): usleep/11115 nanosleep(rqtp: 0x7fff083fa480) = 0
__nanosleep_nocancel+0x7 (/usr/lib64/libc-2.22.so)
usleep+0x34 (/usr/lib64/libc-2.22.so)
main+0x1eb (/usr/bin/usleep)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
_start+0x29 (/usr/bin/usleep)
# perf test 48
48: Test dwarf unwind : Ok
#
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-11-git-send-email-hekuang@huawei.com
[ Fixed exit path for 'live' mode tools, where we need to default to local unwinding ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To determine the libunwind methods to use, we should get the
32bit/64bit information from maps of a thread. When a thread is newly
created, the information is not prepared. This patch moves
unwind__prepare_access() into thread__insert_map() so we can get the
information we need from maps. Meanwhile, let thread__insert_map()
return value and show messages on error.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-5-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the get_main_thread function from db-export.c to thread.c so that
it can be used elsewhere.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464051145-19968-2-git-send-email-andi@firstfloor.org
[ Removed leftover bits from db-export.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Will be used for lazy comm loading in 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7ogbkuoka1y2qsmcckqxvl5m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461577678-29517-1-git-send-email-eric.engestrom@imgtec.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We should always return from thread__new(), the constructor, with the
object with a reference count of one, so that:
struct thread *thread = thread__new();
thread__put(thread);
Will call thread__delete().
If any reference is made to that 'thread' variable, it better use
thread__get(thread) to hold a reference.
We were returning with thread->refcnt set to zero, fix it and some cases
where thread__delete() was being called, which were not a problem
because just one reference was being used, now that we set it to 1, use
thread__put() instead.
Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4b9mkuk66to4ecckpmpvqx6s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Attempting to clone map groups onto themselves will deadlock.
It only happens because of other bugs, but the code should protect
itself anyway.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439994561-27436-2-git-send-email-adrian.hunter@intel.com
[ Use pr_debug() instead of dump_fprintf() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A thread moves from a rb tree to a list, but can't be on both, because
those linkage members are in a union. This is leftover from when I was
debugging thread refcounting and had nuked that union.
It is harmless duplication, as RB_CLEAR_NODE() does again what
INIT_LIST_HEAD does.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hmma9lmip6qlhzhgkhp9tzd1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixing bugs in 'perf top' where the used thread unsafe 'struct thread'
refcount implementation was falling apart because we really use two
threads.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hil2hol294u5ntcuof4jhmn6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It is set by calling thread__set_comm right before the removed line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1425396581-17716-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need to do that to stop accumulating entries in the dead_threads
linked list, i.e. we were keeping references to threads in struct hists
that continue to exist even after a thread exited and was removed from
the machine threads rbtree.
We still keep the dead_threads list, but just for debugging, allowing us
to iterate at any given point over the threads that still are referenced
by things like struct hist_entry.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3ejvfyed0r7ue61dkurzjux4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Events may still be ordered even if there are no timestamps e.g. if the
data is recorded per-thread.
Also synthesized COMM events have a timestamp of zero.
Consequently it is better to keep comm entries even if they have a
timestamp of zero.
However, when a struct thread is created the command string is not known
and a comm entry with a string of the form ":<tid>" is used.
In that case thread->comm_set is false and the comm entry should be
overridden.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415715423-15563-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
