| Age | Commit message (Collapse) | Author |
|---|
|
It has 'if (err >0 )' statement in nlmsg_unicast(), so use nlmsg_unicast()
instead of netlink_unicast(), this looks more concise.
v2: remove the change in netfilter.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzbot reports that in mac80211 we have a potential deadlock
between our "local->stop_queue_reasons_lock" (spinlock) and
netlink's nl_table_lock (rwlock). This is because there's at
least one situation in which we might try to send a netlink
message with this spinlock held while it is also possible to
take the spinlock from a hardirq context, resulting in the
following deadlock scenario reported by lockdep:
CPU0 CPU1
---- ----
lock(nl_table_lock);
local_irq_disable();
lock(&local->queue_stop_reason_lock);
lock(nl_table_lock);
<Interrupt>
lock(&local->queue_stop_reason_lock);
This seems valid, we can take the queue_stop_reason_lock in
any kind of context ("CPU0"), and call ieee80211_report_ack_skb()
with the spinlock held and IRQs disabled ("CPU1") in some
code path (ieee80211_do_stop() via ieee80211_free_txskb()).
Short of disallowing netlink use in scenarios like these
(which would be rather complex in mac80211's case due to
the deep callchain), it seems the only fix for this is to
disable IRQs while nl_table_lock is held to avoid hitting
this scenario, this disallows the "CPU0" portion of the
reported deadlock.
Note that the writer side (netlink_table_grab()) already
disables IRQs for this lock.
Unfortunately though, this seems like a huge hammer, and
maybe the whole netlink table locking should be reworked.
Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When I added support to allow generic netlink multicast groups to be
restricted to subscribers with CAP_NET_ADMIN I was unaware that a
genl_bind implementation already existed in the past.
It was reverted due to ABBA deadlock:
1. ->netlink_bind gets called with the table lock held.
2. genetlink bind callback is invoked, it grabs the genl lock.
But when a new genl subsystem is (un)registered, these two locks are
taken in reverse order.
One solution would be to revert again and add a comment in genl
referring 1e82a62fec613, "genetlink: remove genl_bind").
This would need a second change in mptcp to not expose the raw token
value anymore, e.g. by hashing the token with a secret key so userspace
can still associate subflow events with the correct mptcp connection.
However, Paolo Abeni reminded me to double-check why the netlink table is
locked in the first place.
I can't find one. netlink_bind() is already called without this lock
when userspace joins a group via NETLINK_ADD_MEMBERSHIP setsockopt.
Same holds for the netlink_unbind operation.
Digging through the history, commit f773608026ee1
("netlink: access nlk groups safely in netlink bind and getname")
expanded the lock scope.
commit 3a20773beeeeade ("net: netlink: cap max groups which will be considered in netlink_bind()")
... removed the nlk->ngroups access that the lock scope
extension was all about.
Reduce the lock scope again and always call ->netlink_bind without
the table lock.
The Fixes tag should be vs. the patch mentioned in the link below,
but that one got squash-merged into the patch that came earlier in the
series.
Fixes: 4d54cc32112d8d ("mptcp: avoid lock_fast usage in accept path")
Link: https://lore.kernel.org/mptcp/20210213000001.379332-8-mathew.j.martineau@linux.intel.com/T/#u
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Sean Tranchetti <stranche@codeaurora.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Once event support is added this may need to allocate memory while msk
lock is held with softirqs disabled.
Not using lock_fast also allows to do the allocation with GFP_KERNEL.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Often userspace won't request the extack information, or they don't log it
because of log level or so, and even when they do, sometimes it's not
enough to know exactly what caused the error.
Netlink extack is the standard way of reporting erros with descriptive
error messages. With a trace point on it, we then can know exactly where
the error happened, regardless of userspace app. Also, we can even see if
the err msg was overwritten.
The wrapper do_trace_netlink_extack() is because trace points shouldn't be
called from .h files, as trace points are not that small, and the function
call to do_trace_netlink_extack() on the macros is not protected by
tracepoint_enabled() because the macros are called from modules, and this
would require exporting some trace structs. As this is error path, it's
better to export just the wrapper instead.
v2: removed leftover tracepoint declaration
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/4546b63e67b2989789d146498b13cc09e1fdc543.1612403190.git.marcelo.leitner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new attribute NLMSGERR_ATTR_POLICY to the extended ACK
to advertise the policy, e.g. if an attribute was out of range,
you'll know the range that's permissible.
Add new NL_SET_ERR_MSG_ATTR_POL() and NL_SET_ERR_MSG_ATTR_POL()
macros to set this, since realistically it's only useful to do
this when the bad attribute (offset) is also returned.
Use it in lib/nlattr.c which practically does all the policy
validation.
v2:
- add and use netlink_policy_dump_attr_size_estimate()
v3:
- remove redundant break
v4:
- really remove redundant break ... sorry
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the per-attribute policy writing into a new
helper function, to be used later for dumping out the
policy of a rejected attribute.
v2:
- fix some indentation
v3:
- change variable order in netlink_policy_dump_write()
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We don't have good validation policy for existing unsigned int attrs
which serve as flags (for new ones we could use NLA_BITFIELD32).
With increased use of policy dumping having the validation be
expressed as part of the policy is important. Add validation
policy in form of a mask of supported/valid bits.
Support u64 in the uAPI to be future-proof, but really for now
the embedded mask member can only hold 32 bits, so anything with
bit 32+ set will always fail validation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Right now CTRL_CMD_GETPOLICY can only dump the family-wide
policy. Support dumping policy of a specific op.
v3:
- rebase after per-op policy export and handle that
v2:
- make cmd U32, just in case.
v1:
- don't echo op in the output in a naive way, this should
make it cleaner to extend the output format for dumping
policies for all the commands at once in the future.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20201001225933.1373426-11-kuba@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for per-op policy dumping. The data is pretty much
as before, except that now the assumption that the policy with
index 0 is "the" policy no longer holds - you now need to look
at the new CTRL_ATTR_OP_POLICY attribute which is a nested attr
(indexed by op) containing attributes for do and dump policies.
When a single op is requested, the CTRL_ATTR_OP_POLICY will be
added in the same way, since do and dump policies may differ.
v2:
- conditionally advertise per-command policies only if there
actually is a policy being used for the do/dump and it's
present at all
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We'll need this later for the per-op policy index dump.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rework the policy dump code a bit to support adding multiple
policies to a single dump, in order to e.g. support per-op
policies in generic netlink.
v2:
- move kernel-doc to implementation [Jakub]
- squash the first patch to not flip-flop on the prototype
[Jakub]
- merge netlink_policy_dump_get_policy_idx() with the old
get_policy_idx() we already had
- rebase without Jakub's patch to have per-op dump
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The maxtype is really an integral part of the policy, and while we
haven't gotten into a situation yet where this happens, it seems
that some developer might eventually have two places pointing to
identical policies, with different maxattr to exclude some attrs
in one of the places.
Even if not, it's really the right thing to compare both since the
two data items fundamentally belong together.
v2:
- also do the proper comparison in get_policy_idx()
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for adding a new attribute to CTRL_CMD_GETPOLICY
split the policies for getpolicy and getfamily apart.
This will cause a slight user-visible change in that dumping
the policies will switch from per family to per op, but
supposedly sniffer-type applications (which are the main use
case for policy dumping thus far) should support both, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Attributes are already parsed based on the policy specified
in the family and ready-to-use in info->attrs. No need to
call genlmsg_parse() again.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add policy to the struct genl_ops structure, this time
with maxattr, so it can be used properly.
Propagate .policy and .maxattr from the family
in genl_get_cmd() if needed, this way the rest of the
code does not have to worry if the policy is per op
or global.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The structure of ctrl_dumppolicy() is clearly split into
init and dumping. Move the init to a .start callback
for clarity, it's a more idiomatic netlink dump code structure.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Whenever netlink dump uses more than 2 cb->args[] entries
code gets hard to read. We're about to add more state to
ctrl_dumppolicy() so create a structure.
Since the structure is typed and clearly named we can remove
the local fam_id variable and use ctx->fam_id directly.
v3:
- rebase onto explicit free fix
v1:
- s/nl_policy_dump/netlink_policy_dump_state/
- forward declare struct netlink_policy_dump_state,
and move from passing unsigned long to actual pointer type
- add build bug on
- u16 fam_id
- s/args/ctx/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We want to add maxattr and policy back to genl_ops, to enable
dumping per command policy to user space. This, however, would
cause bloat for all the families with global policies. Introduce
smaller version of ops (half the size of genl_ops). Translate
these smaller ops into a full blown struct before use in the
core.
v1:
- use struct assignment
- put a full copy of the op in struct genl_dumpit_info
- s/light/small/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-10-02
1) Add a full xfrm compatible layer for 32-bit applications on
64-bit kernels. From Dmitry Safonov.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
[ Upstream commit a95bc734e60449e7b073ff7ff70c35083b290ae9 ]
If userspace doesn't complete the policy dump, we leak the
allocated state. Fix this.
Fixes: d07dcf9aadd6 ("netlink: add infrastructure to expose policies to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modules those use netlink may supply a 2nd skb, (via frag_list)
that contains an alternative data set meant for applications
using 32bit compatibility mode.
In such a case, netlink_recvmsg will use this 2nd skb instead of the
original one.
Without this patch, such compat applications will retrieve
all netlink dump data, but will then get an unexpected EOF.
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
It's hard to read the code without spaces around '&',
for better reading, add spaces around '&'.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
|
|
In the policy export for binary attributes I erroneously used
a != NLA_VALIDATE_NONE comparison instead of checking for the
two possible values, which meant that if a validation function
pointer ended up aliasing the min/max as negatives, we'd hit
a warning in nla_get_range_unsigned().
Fix this to correctly check for only the two types that should
be handled here, i.e. range with or without warn-too-long.
Reported-by: syzbot+353df1490da781637624@syzkaller.appspotmail.com
Fixes: 8aa26c575fb3 ("netlink: make NLA_BINARY validation more flexible")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The data races were reported by KCSAN:
BUG: KCSAN: data-race in netlink_recvmsg / skb_queue_tail
write (marked) to 0xffff8c0986e5a8c8 of 8 bytes by interrupt on cpu 3:
skb_queue_tail+0xcc/0x120
__netlink_sendskb+0x55/0x80
netlink_broadcast_filtered+0x465/0x7e0
nlmsg_notify+0x8f/0x120
rtnl_notify+0x8e/0xb0
__neigh_notify+0xf2/0x120
neigh_update+0x927/0xde0
arp_process+0x8a3/0xf50
arp_rcv+0x27c/0x3b0
__netif_receive_skb_core+0x181c/0x1840
__netif_receive_skb+0x38/0xf0
netif_receive_skb_internal+0x77/0x1c0
napi_gro_receive+0x1bd/0x1f0
e1000_clean_rx_irq+0x538/0xb20 [e1000]
e1000_clean+0x5e4/0x1340 [e1000]
net_rx_action+0x310/0x9d0
__do_softirq+0xe8/0x308
irq_exit+0x109/0x110
do_IRQ+0x7f/0xe0
ret_from_intr+0x0/0x1d
0xffffffffffffffff
read to 0xffff8c0986e5a8c8 of 8 bytes by task 1463 on cpu 0:
netlink_recvmsg+0x40b/0x820
sock_recvmsg+0xc9/0xd0
___sys_recvmsg+0x1a4/0x3b0
__sys_recvmsg+0x86/0x120
__x64_sys_recvmsg+0x52/0x70
do_syscall_64+0xb5/0x360
entry_SYSCALL_64_after_hwframe+0x65/0xca
0xffffffffffffffff
Since the write is under sk_receive_queue->lock but the read
is done as lockless. so fix it by using skb_queue_empty_lockless()
instead of skb_queue_empty() for the read in netlink_rcv_wake()
Signed-off-by: zhudi <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Drop duplicated words in net/netlink/.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
|
|
Evidently, when I did this previously, we didn't have more than
10 policies and didn't run into the reallocation path, because
it's missing a memset() for the unused policies. Fix that.
Fixes: d07dcf9aadd6 ("netlink: add infrastructure to expose policies to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add range validation for NLA_BINARY, allowing validation of any
combination of combination minimum or maximum lengths, using the
existing NLA_POLICY_RANGE()/NLA_POLICY_FULL_RANGE() macros, just
like for integers where the value is checked.
Also make NLA_POLICY_EXACT_LEN(), NLA_POLICY_EXACT_LEN_WARN()
and NLA_POLICY_MIN_LEN() special cases of this, removing the old
types NLA_EXACT_LEN and NLA_MIN_LEN.
This allows us to save some code where both minimum and maximum
lengths are requires, currently the policy only allows maximum
(NLA_BINARY), minimum (NLA_MIN_LEN) or exact (NLA_EXACT_LEN), so
a range of lengths cannot be accepted and must be checked by the
code that consumes the attributes later.
Also, this allows advertising the correct ranges in the policy
export to userspace. Here, NLA_MIN_LEN and NLA_EXACT_LEN already
were special cases of NLA_BINARY with min and min/max length
respectively.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add support to enable/disable the thermal zones resulting on core
code and drivers cleanup (Andrzej Pietrasiewicz)
- Add generic netlink support for userspace notifications: events,
temperature and discovery commands (Daniel Lezcano)
- Fix redundant initialization for a ret variable (Colin Ian King)
- Remove the clock cooling code as it is used nowhere (Amit Kucheria)
- Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian
Rotariu)
- Replace all references to thermal.txt in the documentation to the
corresponding yaml files (Amit Kucheria)
- Add maintainer entry for the IPA (Lukasz Luba)
- Add support for MSM8939 for the tsens (Shawn Guo)
- Update power allocator and devfreq cooling to SPDX licensing (Lukasz
Luba)
- Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)
- Add tsensor support for V2 mediatek thermal system (Henry Yen)
- Fix thermal zone lookup by ID for the core code (Thierry Reding)
* tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits)
thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support
thermal: mediatek: Add tsensor support for V2 thermal system
thermal: mediatek: Prepare to add support for other platforms
thermal: Update power allocator and devfreq cooling to SPDX licensing
MAINTAINERS: update entry to thermal governors file name prefixing
thermal: core: Add thermal zone enable/disable notification
thermal: qcom: tsens-v0_1: Add support for MSM8939
dt-bindings: tsens: qcom: Document MSM8939 compatible
thermal: core: Fix thermal zone lookup by ID
thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id
thermal: imx8mm: Support module autoloading
thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
MAINTAINERS: Add maintenance information for IPA
thermal: rcar_gen3_thermal: Do not shadow thcode variable
dt-bindings: thermal: Get rid of thermal.txt and replace references
thermal: core: Move initialization after core initcall
thermal: netlink: Improve the initcall ordering
net: genetlink: Move initialization to core_initcall
thermal: rcar_gen3_thermal: Add r8a774e1 support
thermal/drivers/clock_cooling: Remove clock_cooling code
...
|
|
There is no functionality change for this patch.
Struct bpf_iter_reg is used to register a bpf_iter target,
which includes information for both prog_load, link_create
and seq_file creation.
This patch puts fields related seq_file creation into
a different structure. This will be useful for map
elements iterator where one iterator covers different
map types and different map types may have different
seq_ops, init/fini private_data function and
private_data size.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184109.590030-1-yhs@fb.com
|
|
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One additional field btf_id is added to struct
bpf_ctx_arg_aux to store the precomputed btf_ids.
The btf_id is computed at build time with
BTF_ID_LIST or BTF_ID_LIST_GLOBAL macro definitions.
All existing bpf iterators are changed to used
pre-compute btf_ids.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720163403.1393551-1-yhs@fb.com
|
|
The generic netlink is initialized far after the netlink protocol
itself at subsys_initcall. The devlink is initialized at the same
level, but after, as shown by a disassembly of the vmlinux:
[ ... ]
374 ffff8000115f22c0 <__initcall_devlink_init4>:
375 ffff8000115f22c4 <__initcall_genl_init4>:
[ ... ]
The function devlink_init() calls genl_register_family() before the
generic netlink subsystem is initialized.
As the generic netlink initcall level is set since 2005, it seems that
was not a problem, but now we have the thermal framework initialized
at the core_initcall level which creates the generic netlink family
and sends a notification which leads to a subtle memory corruption
only detectable when the CONFIG_INIT_ON_ALLOC_DEFAULT_ON option is set
with the earlycon at init time.
The thermal framework needs to be initialized early in order to begin
the mitigation as soon as possible. Moving it to postcore_initcall is
acceptable.
This patch changes the initialization level for the generic netlink
family to the core_initcall and comes after the netlink protocol
initialization.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/20200715074120.8768-1-daniel.lezcano@linaro.org
|
|
A potential deadlock can occur during registering or unregistering a
new generic netlink family between the main nl_table_lock and the
cb_lock where each thread wants the lock held by the other, as
demonstrated below.
1) Thread 1 is performing a netlink_bind() operation on a socket. As part
of this call, it will call netlink_lock_table(), incrementing the
nl_table_users count to 1.
2) Thread 2 is registering (or unregistering) a genl_family via the
genl_(un)register_family() API. The cb_lock semaphore will be taken for
writing.
3) Thread 1 will call genl_bind() as part of the bind operation to handle
subscribing to GENL multicast groups at the request of the user. It will
attempt to take the cb_lock semaphore for reading, but it will fail and
be scheduled away, waiting for Thread 2 to finish the write.
4) Thread 2 will call netlink_table_grab() during the (un)registration
call. However, as Thread 1 has incremented nl_table_users, it will not
be able to proceed, and both threads will be stuck waiting for the
other.
genl_bind() is a noop, unless a genl_family implements the mcast_bind()
function to handle setting up family-specific multicast operations. Since
no one in-tree uses this functionality as Cong pointed out, simply removing
the genl_bind() function will remove the possibility for deadlock, as there
is no attempt by Thread 1 above to take the cb_lock semaphore.
Fixes: c380d9a7afff ("genetlink: pass multicast bind/unbind to families")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
genl_family_rcv_msg_attrs_parse() reuses the global family->attrbuf
when family->parallel_ops is false. However, family->attrbuf is not
protected by any lock on the genl_family_rcv_msg_doit() code path.
This leads to several different consequences, one of them is UAF,
like the following:
genl_family_rcv_msg_doit(): genl_start():
genl_family_rcv_msg_attrs_parse()
attrbuf = family->attrbuf
__nlmsg_parse(attrbuf);
genl_family_rcv_msg_attrs_parse()
attrbuf = family->attrbuf
__nlmsg_parse(attrbuf);
info->attrs = attrs;
cb->data = info;
netlink_unicast_kernel():
consume_skb()
genl_lock_dumpit():
genl_dumpit_info(cb)->attrs
Note family->attrbuf is an array of pointers to the skb data, once
the skb is freed, any dereference of family->attrbuf will be a UAF.
Maybe we could serialize the family->attrbuf with genl_mutex too, but
that would make the locking more complicated. Instead, we can just get
rid of family->attrbuf and always allocate attrbuf from heap like the
family->parallel_ops==true code path. This may add some performance
overhead but comparing with taking the global genl_mutex, it still
looks better.
Fixes: 75cdbdd08900 ("net: ieee802154: have genetlink code to parse the attrs during dumpit")
Fixes: 057af7071344 ("net: tipc: have genetlink code to parse the attrs during dumpit")
Reported-and-tested-by: syzbot+3039ddf6d7b13daf3787@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+80cad1e3cb4c41cde6ff@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+736bcbcb11b60d0c0792@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+520f8704db2b68091d44@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+c96e4dfb32f8987fdeed@syzkaller.appspotmail.com
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
genl_family_rcv_msg_attrs_parse() and genl_family_rcv_msg_attrs_free()
take a boolean parameter to determine whether allocate/free the family
attrs. This is unnecessary as we can just check family->parallel_ops.
More importantly, callers would not need to worry about pairing these
parameters correctly after this patch.
And this fixes a memory leak, as after commit c36f05559104
("genetlink: fix memory leaks in genl_family_rcv_msg_dumpit()")
we call genl_family_rcv_msg_attrs_parse() for both parallel and
non-parallel cases.
Fixes: c36f05559104 ("genetlink: fix memory leaks in genl_family_rcv_msg_dumpit()")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are two kinds of memory leaks in genl_family_rcv_msg_dumpit():
1. Before we call ops->start(), whenever an error happens, we forget
to free the memory allocated in genl_family_rcv_msg_dumpit().
2. When ops->start() fails, the 'info' has been already installed on
the per socket control block, so we should not free it here. More
importantly, nlk->cb_running is still false at this point, so
netlink_sock_destruct() cannot free it either.
The first kind of memory leaks is easier to resolve, but the second
one requires some deeper thoughts.
After reviewing how netfilter handles this, the most elegant solution
I find is just to use a similar way to allocate the memory, that is,
moving memory allocations from caller into ops->start(). With this,
we can solve both kinds of memory leaks: for 1), no memory allocation
happens before ops->start(); for 2), ops->start() handles its own
failures and 'info' is installed to the socket control block only
when success. The only ugliness here is we have to pass all local
variables on stack via a struct, but this is not hard to understand.
Alternatively, we can introduce a ops->free() to solve this too,
but it is overkill as only genetlink has this problem so far.
Fixes: 1927f41a22a0 ("net: genetlink: introduce dump info struct to be available during dumpit op")
Reported-by: syzbot+21f04f481f449c8db840@syzkaller.appspotmail.com
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Shaochun Chen <cscnull@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit b121b341e598 ("bpf: Add PTR_TO_BTF_ID_OR_NULL
support") adds a field btf_id_or_null_non0_off to
bpf_prog->aux structure to indicate that the
first ctx argument is PTR_TO_BTF_ID reg_type and
all others are PTR_TO_BTF_ID_OR_NULL.
This approach does not really scale if we have
other different reg types in the future, e.g.,
a pointer to a buffer.
This patch enables bpf_iter targets registering ctx argument
reg types which may be different from the default one.
For example, for pointers to structures, the default reg_type
is PTR_TO_BTF_ID for tracing program. The target can register
a particular pointer type as PTR_TO_BTF_ID_OR_NULL which can
be used by the verifier to enforce accesses.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513180221.2949882-1-yhs@fb.com
|
|
Currently bpf_iter_reg_target takes parameters from target
and allocates memory to save them. This is really not
necessary, esp. in the future we may grow information
passed from targets to bpf_iter manager.
The patch refactors the code so target reg_info
becomes static and bpf_iter manager can just take
a reference to it.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200513180219.2949605-1-yhs@fb.com
|
|
This patch added netlink and ipv6_route targets, using
the same seq_ops (except show() and minor changes for stop())
for /proc/net/{netlink,ipv6_route}.
The net namespace for these targets are the current net
namespace at file open stage, similar to
/proc/net/{netlink,ipv6_route} reference counting
the net namespace at seq_file open stage.
Since module is not supported for now, ipv6_route is
supported only if the IPV6 is built-in, i.e., not compiled
as a module. The restriction can be lifted once module
is properly supported for bpf_iter.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175910.2476329-1-yhs@fb.com
|
|
Add, and use in generic netlink, helpers to dump out a netlink
policy to userspace, including all the range validation data,
nested policies etc.
This lets userspace discover what the kernel understands.
For families/commands other than generic netlink, the helpers
need to be used directly in an appropriate command, or we can
add some infrastructure (a new netlink family) that those can
register their policies with for introspection. I'm not that
familiar with non-generic netlink, so that's left out for now.
The data exposed to userspace also includes min and max length
for binary/string data, I've done that instead of letting the
userspace tools figure out whether min/max is intended based
on the type so that we can extend this later in the kernel, we
might want to just use the range data for example.
Because of this, I opted to not directly expose the NLA_*
values, even if some of them are already exposed via BPF, as
with min/max length we don't need to have different types here
for NLA_BINARY/NLA_MIN_LEN/NLA_EXACT_LEN, we just make them
all NL_ATTR_TYPE_BINARY with min/max length optionally set.
Similarly, we don't really need NLA_MSECS, and perhaps can
remove it in the future - but not if we encode it into the
userspace API now. It gets mapped to NL_ATTR_TYPE_U64 here.
Note that the exposing here corresponds to the strict policy
interpretation, and NLA_UNSPEC items are omitted entirely.
To get those, change them to NLA_MIN_LEN which behaves in
exactly the same way, but is exposed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit ba0dc5f6e0ba ("netlink: allow sending extended ACK with cookie on
success") introduced a cookie which can be sent to userspace as part of
extended ack message in the form of NLMSGERR_ATTR_COOKIE attribute.
Currently the cookie is ignored if error code is non-zero but there is
no technical reason for such limitation and it can be useful to provide
machine parseable information as part of an error message.
Include NLMSGERR_ATTR_COOKIE whenever the cookie has been set,
regardless of error code.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
