summaryrefslogtreecommitdiff
path: root/net/mac80211/mlme.c
AgeCommit message (Collapse)Author
2021-07-23mac80211: fix enabling 4-address mode on a sta vif after assocFelix Fietkau
Notify the driver about the 4-address mode change and also send a nulldata packet to the AP to notify it about the change Fixes: 1ff4e8f2dec8 ("mac80211: notify the driver when a sta uses 4-address mode") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210702050111.47546-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23Revert "mac80211: HE STA disassoc due to QOS NULL not sent"Ping-Ke Shih
This reverts commit f39b07fdfb68 ("mac80211: HE STA disassoc due to QOS NULL not sent") Since iwlwifi specific workaround, which blocks to send NDP, is removed, we can revert this commit. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20210623134826.10318-2-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: notify driver on mgd TX completionJohannes Berg
We have mgd_prepare_tx(), but sometimes drivers may want/need to take action when the exchange finishes, whether successfully or not. Add a notification to the driver on completion, i.e. call the new method mgd_complete_tx(). To unify the two scenarios, and to add more information, make both of them take a struct that has the duration (prepare only), subtype (both) and success (complete only). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.5d94e78f6230.I6dc979606b6f28701b740d7aab725f7853a5a155@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: add vendor-specific capabilities to assoc requestJohannes Berg
When sending an association request, add any vendor specific capabilities at the end of the frame. This way, mac80211 is still completely in charge of building the frame, but drivers can determine what should be added depending on the band and interface type. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.80d716d69a5f.I28097ff19be6b22aebdc33a72795d2662755d41f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: fix some spelling mistakesZheng Yongjun
Fix some spelling mistakes in comments: freeed ==> freed addreses ==> addresses containging ==> containing capablity ==> capability sucess ==> success atleast ==> at least Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20210607150047.2855962-1-zhengyongjun3@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: remove use of ieee80211_get_he_sta_cap()Johannes Berg
All uses of ieee80211_get_he_sta_cap() were actually wrong, in net/mac80211/mlme.c they were wrong because that code is also used for P2P (which is a different interface type), in net/mac80211/main.c that should check all interface types. Fix all that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.ede114bc8b46.Ibcd9a5d98430e936344eb6d242ef8a65c2f59b74@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: improve AP disconnect messageJohannes Berg
If the AP changes capability/bandwidth in some fashion, the message might be somewhat misleading and we don't know what really changed. Modify the message to speak about "caps/bw" instead of just "bandwidth", and print out the flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.dc22c48985fa.I4bf5fbc17ec783c21d4b50c8c35b1de390896ccd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: add to bss_conf if broadcast TWT is supportedShaul Triebitz
Add to struct ieee80211_bss_conf a twt_broadcast field. Set it to true if both STA and AP support broadcast TWT. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.f7c105237541.I50b302044e2b35e5ed4d3fb8bc7bd3d8bb89b1e1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: handle rate control (RC) racing with chanctx definitionMordechay Goodstein
chanctx represents the current phy configuration and rate scale uses it for achieving max throughput, so if phy changes bandwidth to narrow bandwidth, RC should be _first_ updated to avoid using the wider bandwidth before updating the phy, and vice versa. We assume in the patch that station interface is always updated before updating phy context by calling ieee80211_vif_update_chandef. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.fc4e24496aa2.Ic40ea947c2f65739ea4b5fe3babd0a544240ced6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: move SMPS mode setting after ieee80211_prep_connectionShaul Triebitz
ieee80211_mgd_assoc calls ieee80211_prep_connection which might call ieee80211_prep_channel and set smps_mode to OFF. That will override the previous setting of smps_mode in ieee80211_mgd_assoc and HT SMPS will be set to "disabled" in the association request frame. Move the setting of smps_mode in ieee80211_mgd_assoc to after the call to ieee80211_prep_connection. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.d8e5cc4b527f.Icf3a67fffbdd8c408c0cadfe43f8f4cffdc90acb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: remove iwlwifi specific workaround that broke sta NDP txFelix Fietkau
Sending nulldata packets is important for sw AP link probing and detecting 4-address mode links. The checks that dropped these packets were apparently added to work around an iwlwifi firmware bug with multi-TID aggregation. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-18mac80211: reset profile_periodicity/ema_apJohannes Berg
Apparently we never clear these values, so they'll remain set since the setting of them is conditional. Clear the values in the relevant other cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618133832.316e32d136a9.I2a12e51814258e1e1b526103894f4b9f19a91c8d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-20Merge tag 'mac80211-next-for-net-next-2021-04-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of updates, all over the map: * set sk_pacing_shift for 802.3->802.11 encap offload * some monitor support for 802.11->802.3 decap offload * HE (802.11ax) spec updates * userspace API for TDLS HE support * along with various other small features, cleanups and fixups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19mac80211: drop the connection if firmware crashed while in CSANaftali Goldstein
Don't bother keeping the link in that case. It is way too complicated to keep the connection. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.a126c8833398.I677bdac314dd50d90474a90593902c17f9410cc4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19mac80211: properly drop the connection in case of invalid CSA IEEmmanuel Grumbach
In case the frequency is invalid, ieee80211_parse_ch_switch_ie will fail and we may not even reach the check in ieee80211_sta_process_chanswitch. Drop the connection in case ieee80211_parse_ch_switch_ie failed, but still take into account the CSA mode to remember not to send a deauth frame in case if it is forbidden to. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.34712ef96a0a.I75d7ad7f1d654e8b0aa01cd7189ff00a510512b3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211: clear the beacon's CRC after channel switchEmmanuel Grumbach
After channel switch, we should consider any beacon with a CSA IE as a new switch. If the CSA IE is a leftover from before the switch that the AP forgot to remove, we'll get a CSA-to-Self. This caused issues in iwlwifi where the firmware saw a beacon with a CSA-to-Self with mode = 1 on the new channel after a switch. The firmware considered this a new switch and closed its queues. Since the beacon didn't change between before and after the switch, we wouldn't handle it (the CRC is the same) and we wouldn't let the firmware open its queues again or disconnect if the CSA IE stays for too long. Clear the CRC valid state after we switch to make sure that we handle the beacon and handle the CSA IE as required. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf610c6046a1fd732b4c28@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-08mac80211: fix time-is-after bug in mlmeBen Greear
The incorrect timeout check caused probing to happen when it did not need to happen. This in turn caused tx performance drop for around 5 seconds in ath10k-ct driver. Possibly that tx drop is due to a secondary issue, but fixing the probe to not happen when traffic is running fixes the symptom. Signed-off-by: Ben Greear <greearb@candelatech.com> Fixes: 9abf4e49830d ("mac80211: optimize station connection monitor") Acked-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210330230749.14097-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-16mac80211: Allow HE operation to be longer than expected.Brian Norris
We observed some Cisco APs sending the following HE Operation IE in associate response: ff 0a 24 f4 3f 00 01 fc ff 00 00 00 Its HE operation parameter is 0x003ff4, so the expected total length is 7 which does not match the actual length = 10. This causes association failing with "HE AP is missing HE Capability/operation." According to P802.11ax_D4 Table9-94, HE operation is extensible, and according to 802.11-2016 10.27.8, STA should discard the part beyond the maximum length and parse the truncated element. Allow HE operation element to be longer than expected to handle this case and future extensions. Fixes: e4d005b80dee ("mac80211: refactor extended element parsing") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Yen-lin Lai <yenlinlai@chromium.org> Link: https://lore.kernel.org/r/20210223051926.2653301-1-yenlinlai@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12cfg80211/mac80211: Support disabling HE modeBen Greear
Allow user to disable HE mode, similar to how VHT and HT can be disabled. Useful for testing. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20210204144610.25971-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: mlme: save ssid info to ieee80211_bss_conf while assocWen Gong
The ssid info of ieee80211_bss_conf is filled in ieee80211_start_ap() for AP mode. For STATION mode, it is empty, save the info from struct ieee80211_mgd_assoc_data, the struct ieee80211_mgd_assoc_data will be freed after assoc, so the ssid info of ieee80211_mgd_assoc_data can not access after assoc, save ssid info to ieee80211_bss_conf, then ssid info can be still access after assoc. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1607312195-3583-2-git-send-email-wgong@codeaurora.org [reset on disassoc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: don't filter out beacons once we start CSAEmmanuel Grumbach
I hit a bug in which we started a CSA with an action frame, but the AP changed its mind and didn't change the beacon. The CSA wasn't cancelled and we lost the connection. The beacons were ignored because they never changed: they never contained any CSA IE. Because they never changed, the CRC of the beacon didn't change either which made us ignore the beacons instead of processing them. Now what happens is: 1) beacon has CRC X and it is valid. No CSA IE in the beacon 2) as long as beacon's CRC X, don't process their IEs 3) rx action frame with CSA 4) invalidate the beacon's CRC 5) rx beacon, CRC is still X, but now it is invalid 6) process the beacon, detect there is no CSA IE 7) abort CSA Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.83470b8407e6.I739b907598001362744692744be15335436b8351@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: ignore country element TX power on 6 GHzJohannes Berg
Updates to the 802.11ax draft are coming that deprecate the country element in favour of the transmit power envelope element, and make the maximum transmit power level field in the triplets reserved, so if we parse them we'd use 0 dBm transmit power. Follow suit and completely ignore the element on 6 GHz for purposes of determining TX power. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.9abf9f6b4f88.Icb6e52af586edcc74f1f0360e8f6fc9ef2bfe8f5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: support driver-based disconnect with reconnect hintJohannes Berg
Support the driver indicating that a disconnection needs to be performed, and pass through the reconnect hint in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.5c8dab7a22a0.I58459fdf6968b16c90cab9c574f0f04ca22b0c79@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: support immediate reconnect request hintJohannes Berg
There are cases where it's necessary to disconnect, but an immediate reconnection is desired. Support a hint to userspace that this is the case, by including a new attribute in the deauth or disassoc event. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.58d33941fb9d.I0e7168c205c7949529c8e3b86f3c9b12c01a7017@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: include block-tx flag in channel switch started eventJohannes Berg
In the NL80211_CMD_CH_SWITCH_STARTED_NOTIFY event, include the NL80211_ATTR_CH_SWITCH_BLOCK_TX flag attribute if block-tx was requested by the AP. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.8953ef22cc64.Ifee9cab337a4369938545920ba5590559e91327a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: disallow band-switch during CSAJohannes Berg
If the AP advertises a band switch during CSA, we will not have the right information to continue working with it, since it will likely (have to) change its capabilities and we don't track any capability changes at all. Additionally, we store e.g. supported rates per band, and that information would become invalid. Since this is a fringe scenario, just disconnect explicitly. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.0e2327107c06.I461adb07704e056b054a4a7c29b80c95a9f56637@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: Skip entries with SAE H2E only membership selectorIlan Peer
When parsing supported rates IE. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.8228e2be791e.I626c93241fef66bc71aa0cb9719aba1b11232cf1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: he: remove non-bss-conf fields from bss_confShaul Triebitz
ack_enabled and multi_sta_back_32bit are station capabilities and should not be in the bss_conf structure. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.69a7f7753444.I405c4b5245145e24577512c477f19131d4036489@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-30mac80211: don't require VHT elements for HE on 2.4 GHzJohannes Berg
After the previous similar bugfix there was another bug here, if no VHT elements were found we also disabled HE. Fix this to disable HE only on the 5 GHz band; on 6 GHz it was already not disabled, and on 2.4 GHz there need (should) not be any VHT. Fixes: 57fa5e85d53c ("mac80211: determine chandef from HE 6 GHz operation") Link: https://lore.kernel.org/r/20201013140156.535a2fc6192f.Id6e5e525a60ac18d245d86f4015f1b271fce6ee6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-08mac80211: initialize last_rate for S1G STAsThomas Pedersen
last_rate is initialized to zero by sta_info_alloc(), but this indicates legacy bitrate for the last TX rate (and invalid for the last RX rate). To avoid a warning when decoding the last rate as legacy (before a data frame has been sent), initialize them as S1G MCS. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201005164522.18069-2-thomas@adapt-ip.com [rename to ieee80211_s1g_sta_rate_init(), seems more appropriate] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-02mac80211: avoid processing non-S1G elements on S1G bandThomas Pedersen
In ieee80211_determine_chantype(), the sband->ht_cap was being processed before S1G Operation element. Since the HT capability element should not be present on the S1G band, avoid processing potential garbage by moving the call to ieee80211_apply_htcap_overrides() to after the S1G block. Also, in case of a missing S1G Operation element, we would continue trying to process non-S1G elements (and return with a channel width of 20MHz). Instead, just assume primary channel is equal to operating and infer the operating width from the BSS channel, then return. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201001174748.24520-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: fix regression in sta connection monitorFelix Fietkau
When a frame was acked and probe frames were sent, the connection monitoring needs to be reset, otherwise it will keep probing until the connection is considered dead, even though frames have been acked in the mean time. Fixes: 9abf4e49830d ("mac80211: optimize station connection monitor") Reported-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200927105605.97954-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G associationThomas Pedersen
The changes required for associating in S1G are: - apply S1G BSS channel info before assoc - mark all S1G STAs as QoS STAs - include and parse AID request element - handle new Association Response format - don't fail assoc if supported rates element is missing Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-15-thomas@adapt-ip.com [pass skb to ieee80211_add_aid_request_ie(), remove unused variable 'bss'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: receive and process S1G beaconsThomas Pedersen
S1G beacons are 802.11 Extension Frames, so the fixed header part differs from regular beacons. Add a handler to process S1G beacons and abstract out the fetching of BSSID and element start locations in the beacon body handler. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-14-thomas@adapt-ip.com [don't rename, small coding style cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: encode listen interval for S1GThomas Pedersen
S1G allows listen interval up to 2^14 * 10000 beacon intervals. In order to do this listen interval needs a scaling factor applied to the lower 14 bits. Calculate this and properly encode the listen interval for S1G STAs. See IEEE802.11ah-2016 Table 9-44a for reference. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-10-thomas@adapt-ip.com [move listen_int_usf into function using it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: support S1G STA capabilitiesThomas Pedersen
Include the S1G Capabilities element in an association request, and support the cfg80211 capability overrides. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-5-thomas@adapt-ip.com [pass skb to ieee80211_add_s1g_capab_ie(), small code style edits] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18mac80211: optimize station connection monitorFelix Fietkau
Calling mod_timer for every rx/tx packet can be quite expensive. Instead of constantly updating the timer, we can simply let it run out and check the timestamp of the last ACK or rx packet to re-arm it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-9-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: notify the driver when a sta uses 4-address modeFelix Fietkau
This is needed for encapsulation offload of 4-address mode packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-14-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: do not disable HE if HT is missing on 2.4 GHzWen Gong
VHT is not supported on 2.4 GHz, but HE is; don't disable HE if HT is missing there, do that only on 5 GHz (6 GHz is only HE). Fixes: 57fa5e85d53ce51 ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/010101747cb617f2-593c5410-1648-4a42-97a0-f3646a5a6dd1-000000@us-west-2.amazonses.com [rewrite the commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac80211: Do not report beacon loss if beacon filtering enabledLoic Poulain
mac80211.h says: Beacon filter support is advertised with the IEEE80211_VIF_BEACON_FILTER interface capability. The driver needs to enable beacon filter support whenever power save is enabled, that is IEEE80211_CONF_PS is set. When power save is enabled, the stack will not check for beacon loss and the driver needs to notify about loss of beacons with ieee80211_beacon_loss(). Some controllers may want to dynamically enable the beacon filter capabilities on power save entry (CONF_PS) and disable it on exit. This is the case for the wcn36xx driver which only supports beacon filtering in PS mode (no CONNECTION_MONITOR support). When the mac80211 beacon monitor timer expires, the beacon filter flag must be checked again in case it as been changed in between (e.g. vif moved to PS mode). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1592471863-31402-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac80211: Handle special status codes in SAE commitJouni Malinen
SAE authentication has been extended with H2E (IEEE 802.11 REVmd) and PK (WFA) options. Those extensions use special status code values in the SAE commit messages (Authentication frame with transaction sequence number 1) to identify which extension is in use. mac80211 was interpreting those new values as the AP denying authentication and that resulted in failure to complete SAE authentication in some cases. Fix this by adding exceptions for the new status code values 126 and 127. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200731183830.18735-1-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31cfg80211: invert HE BSS color 'disabled' to 'enabled'Johannes Berg
This is in fact 'disabled' in the spec, but there it's in a place where that actually makes sense. In our internal data structures, it doesn't really make sense, and in fact the previous commit just fixed a bug in that area. Make this safer by inverting the polarity from 'disabled' to 'enabled'. Link: https://lore.kernel.org/r/20200730130051.5d8399545bd9.Ie62fdcd1a6cd9c969315bc124084a494ca6c8df3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31cfg80211/mac80211: avoid bss color setting in non-HE modesP Praneesh
Adding bss-color configuration is only valid in HE mode. Earlier we have enabled it by default, irrespective of capabilities/mode. Fix that. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Link: https://lore.kernel.org/r/1594262781-21444-1-git-send-email-ppranees@codeaurora.org [fix up commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707204548.GA9320@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-05mac80211: initialize return flags in HE 6 GHz operation parsingJohannes Berg
Dan points out that if ieee80211_chandef_he_6ghz_oper() succeeds, we don't initialize 'ret'. Initialize it to 0 in this case, since everything went fine and nothing has to be disabled. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 57fa5e85d53c ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200603111500.bd2a5ff37b83.I2c3f338ce343b581db493eb9a0d988d1b626c8fb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: set short_slot for 6 GHz bandTova Mussai
Set short slot also for 6 GHz band, just like 5 GHz. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Link: https://lore.kernel.org/r/20200528213443.75f38e6f5efd.I272fbae402b03123f04e9ae69204eeab960c70cd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: Consider 6 GHz band when handling power constraintIlan Peer
Treat it like the 5 GHz band. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20200528213443.889e5c9dd006.Id8ed3bb8000ba8738be5df05639415eb2e23c61a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: use HE 6 GHz band capability and pass it to the driverJohannes Berg
In order to handle 6 GHz AP side, take the HE 6 GHz band capability data and pass it to the driver (which needs it for A-MPDU spacing and A-MPDU length). Link: https://lore.kernel.org/r/1589399105-25472-6-git-send-email-rmanohar@codeaurora.org Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/20200528213443.784e4890d82f.I5f1230d5ab27e84e7bbe88e3645b24ea15a0c146@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: check the correct bit for EMA APShaul Triebitz
An AP supporting EMA (Enhanced Multi-BSSID advertisement) should set bit 83 in the extended capabilities IE (9.4.2.26 in the 802.11ax D5 spec). So the *3rd* bit of the 10th byte should be checked. Also, in one place, the wrong byte was checked. (cfg80211_find_ie returns a pointer to the beginning of the IE, so the data really starts at ie[2], so the 10th byte should be ie[12]. To avoid this confusion, use cfg80211_find_elem instead). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Link: https://lore.kernel.org/r/20200528213443.4316121fa2a3.I9745582f8d41ad8e689dac0fefcd70b276d7c1ea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-28 22:26:59 +0000