| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags
(like SPARC ADI, subject to wiring up the arch code). The user will
have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
bits, if available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans
the Device Tree dma-ranges and the ACPI IORT information before
deciding on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override
(UAO) ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
perf/imx_ddr: Add system PMU identifier for userspace
bindings: perf: imx-ddr: add compatible string
arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mark __system_matches_cap as __maybe_unused
arm64: uaccess: remove vestigal UAO support
arm64: uaccess: remove redundant PAN toggling
arm64: uaccess: remove addr_limit_user_check()
arm64: uaccess: remove set_fs()
arm64: uaccess cleanup macro naming
arm64: uaccess: split user/kernel routines
arm64: uaccess: refactor __{get,put}_user
arm64: uaccess: simplify __copy_user_flushcache()
arm64: uaccess: rename privileged uaccess routines
arm64: sdei: explicitly simulate PAN/UAO entry
arm64: sdei: move uaccess logic to arch/arm64/
arm64: head.S: always initialize PSTATE
arm64: head.S: cleanup SCTLR_ELx initialization
arm64: head.S: rename el2_setup -> init_kernel_el
arm64: add C wrappers for SET_PSTATE_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 and membarrier fixes:
- Correct a few problems in the x86 and the generic membarrier
implementation. Small corrections for assumptions about visibility
which have turned out not to be true.
- Make the PAT bits for memory encryption correct vs 4K and 2M/1G
page table entries as they are at a different location.
- Fix a concurrency issue in the the local bandwidth readout of
resource control leading to incorrect values
- Fix the ordering of allocating a vector for an interrupt. The order
missed to respect the provided cpumask when the first attempt of
allocating node local in the mask fails. It then tries the node
instead of trying the full provided mask first. This leads to
erroneous error messages and breaking the (user) supplied affinity
request. Reorder it.
- Make the INT3 padding detection in optprobe work correctly"
* tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe to detect INT3 padding correctly
x86/apic/vector: Fix ordering in vector assignment
x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled
x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP
membarrier: Execute SYNC_CORE on the calling thread
membarrier: Explicitly sync remote cores when SYNC_CORE is requested
membarrier: Add an actual barrier before rseq_preempt()
x86/membarrier: Get rid of a dubious optimization
|
|
Remove bpf_ prefix, which causes these helpers to be reported in verifier
dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets
fix it as long as it is still possible before UAPI freezes on these helpers.
Fixes: eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kernel/elfcore.c only contains weak symbols, which triggers a bug with
clang in combination with recordmcount:
Cannot find symbol for section 2: .text.
kernel/elfcore.o: failed
Move the empty stubs into linux/elfcore.h as inline functions. As only
two architectures use these, just use the architecture specific Kconfig
symbols to key off the declaration.
Link: https://lkml.kernel.org/r/20201204165742.3815221-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Barret Rhoden <brho@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
1) IPsec compat fixes, from Dmitry Safonov.
2) Fix memory leak in xfrm_user_policy(). Fix from Yu Kuai.
3) Fix polling in xsk sockets by using sk_poll_wait() instead of
datagram_poll() which keys off of sk_wmem_alloc and such which xsk
sockets do not update. From Xuan Zhuo.
4) Missing init of rekey_data in cfgh80211, from Sara Sharon.
5) Fix destroy of timer before init, from Davide Caratti.
6) Missing CRYPTO_CRC32 selects in ethernet driver Kconfigs, from Arnd
Bergmann.
7) Missing error return in rtm_to_fib_config() switch case, from Zhang
Changzhong.
8) Fix some src/dest address handling in vrf and add a testcase. From
Stephen Suryaputra.
9) Fix multicast handling in Seville switches driven by mscc-ocelot
driver. From Vladimir Oltean.
10) Fix proto value passed to skb delivery demux in udp, from Xin Long.
11) HW pkt counters not reported correctly in enetc driver, from Claudiu
Manoil.
12) Fix deadlock in bridge, from Joseph Huang.
13) Missing of_node_pur() in dpaa2 driver, fromn Christophe JAILLET.
14) Fix pid fetching in bpftool when there are a lot of results, from
Andrii Nakryiko.
15) Fix long timeouts in nft_dynset, from Pablo Neira Ayuso.
16) Various stymmac fixes, from Fugang Duan.
17) Fix null deref in tipc, from Cengiz Can.
18) When mss is biog, coose more resonable rcvq_space in tcp, fromn Eric
Dumazet.
19) Revert a geneve change that likely isnt necessary, from Jakub
Kicinski.
20) Avoid premature rx buffer reuse in various Intel driversm from Björn
Töpel.
21) retain EcT bits during TIS reflection in tcp, from Wei Wang.
22) Fix Tso deferral wrt. cwnd limiting in tcp, from Neal Cardwell.
23) MPLS_OPT_LSE_LABEL attribute is 342 ot 8 bits, from Guillaume Nault
24) Fix propagation of 32-bit signed bounds in bpf verifier and add test
cases, from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
selftests: fix poll error in udpgro.sh
selftests/bpf: Fix "dubious pointer arithmetic" test
selftests/bpf: Fix array access with signed variable test
selftests/bpf: Add test for signed 32-bit bound check bug
bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds.
MAINTAINERS: Add entry for Marvell Prestera Ethernet Switch driver
net: sched: Fix dump of MPLS_OPT_LSE_LABEL attribute in cls_flower
net/mlx4_en: Handle TX error CQE
net/mlx4_en: Avoid scheduling restart task if it is already running
tcp: fix cwnd-limited bug for TSO deferral where we send nothing
net: flow_offload: Fix memory leak for indirect flow block
tcp: Retain ECT bits for tos reflection
ethtool: fix stack overflow in ethnl_parse_bitset()
e1000e: fix S0ix flow to allow S0i3.2 subset entry
ice: avoid premature Rx buffer reuse
ixgbe: avoid premature Rx buffer reuse
i40e: avoid premature Rx buffer reuse
igb: avoid transmit queue timeout in xdp path
igb: use xdp_do_flush
igb: skb add metasize for xdp
...
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-12-10
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 12 day(s) which contain
a total of 21 files changed, 163 insertions(+), 88 deletions(-).
The main changes are:
1) Fix propagation of 32-bit signed bounds from 64-bit bounds, from Alexei.
2) Fix ring_buffer__poll() return value, from Andrii.
3) Fix race in lwt_bpf, from Cong.
4) Fix test_offload, from Toke.
5) Various xsk fixes.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Cong Wang, Hulk Robot, Jakub Kicinski, Jean-Philippe Brucker, John
Fastabend, Magnus Karlsson, Maxim Mikityanskiy, Yonghong Song
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 64-bit signed bounds should not affect 32-bit signed bounds unless the
verifier knows that upper 32-bits are either all 1s or all 0s. For example the
register with smin_value==1 doesn't mean that s32_min_value is also equal to 1,
since smax_value could be larger than 32-bit subregister can hold.
The verifier refines the smax/s32_max return value from certain helpers in
do_refine_retval_range(). Teach the verifier to recognize that smin/s32_min
value is also bounded. When both smin and smax bounds fit into 32-bit
subregister the verifier can propagate those bounds.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
* arm64/for-next/fixes: (26 commits)
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mte: Fix typo in macro definition
arm64: entry: fix EL1 debug transitions
arm64: entry: fix NMI {user, kernel}->kernel transitions
arm64: entry: fix non-NMI kernel<->kernel transitions
arm64: ptrace: prepare for EL1 irq/rcu tracking
arm64: entry: fix non-NMI user<->kernel transitions
arm64: entry: move el1 irq/nmi logic to C
arm64: entry: prepare ret_to_user for function call
arm64: entry: move enter_from_user_mode to entry-common.c
arm64: entry: mark entry code as noinstr
arm64: mark idle code as noinstr
arm64: syscall: exit userspace before unmasking exceptions
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver
arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list
arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist
...
# Conflicts:
# arch/arm64/include/asm/exception.h
# arch/arm64/kernel/sdei.c
|
|
* arm64/for-next/scs:
arm64: sdei: Push IS_ENABLED() checks down to callee functions
arm64: scs: use vmapped IRQ and SDEI shadow stacks
scs: switch to vmapped shadow stacks
|
|
membarrier()'s MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE is documented as
syncing the core on all sibling threads but not necessarily the calling
thread. This behavior is fundamentally buggy and cannot be used safely.
Suppose a user program has two threads. Thread A is on CPU 0 and thread B
is on CPU 1. Thread A modifies some text and calls
membarrier(MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE).
Then thread B executes the modified code. If, at any point after
membarrier() decides which CPUs to target, thread A could be preempted and
replaced by thread B on CPU 0. This could even happen on exit from the
membarrier() syscall. If this happens, thread B will end up running on CPU
0 without having synced.
In principle, this could be fixed by arranging for the scheduler to issue
sync_core_before_usermode() whenever switching between two threads in the
same mm if there is any possibility of a concurrent membarrier() call, but
this would have considerable overhead. Instead, make membarrier() sync the
calling CPU as well.
As an optimization, this avoids an extra smp_mb() in the default
barrier-only mode and an extra rseq preempt on the caller.
Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/250ded637696d490c69bef1877148db86066881c.1607058304.git.luto@kernel.org
|
|
membarrier() does not explicitly sync_core() remote CPUs; instead, it
relies on the assumption that an IPI will result in a core sync. On x86,
this may be true in practice, but it's not architecturally reliable. In
particular, the SDM and APM do not appear to guarantee that interrupt
delivery is serializing. While IRET does serialize, IPI return can
schedule, thereby switching to another task in the same mm that was
sleeping in a syscall. The new task could then SYSRET back to usermode
without ever executing IRET.
Make this more robust by explicitly calling sync_core_before_usermode()
on remote cores. (This also helps people who search the kernel tree for
instances of sync_core() and sync_core_before_usermode() -- one might be
surprised that the core membarrier code doesn't currently show up in a
such a search.)
Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/776b448d5f7bd6b12690707f5ed67bcda7f1d427.1607058304.git.luto@kernel.org
|
|
It seems that most RSEQ membarrier users will expect any stores done before
the membarrier() syscall to be visible to the target task(s). While this
is extremely likely to be true in practice, nothing actually guarantees it
by a strict reading of the x86 manuals. Rather than providing this
guarantee by accident and potentially causing a problem down the road, just
add an explicit barrier.
Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d3e7197e034fa4852afcf370ca49c30496e58e40.1607058304.git.luto@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix userstacktrace option for instances
While writing an application that requires user stack trace option to
work in instances, I found that the instance option has a bug that
makes it a nop. The check for performing the user stack trace in an
instance, checks the top level options (not the instance options) to
determine if a user stack trace should be performed or not.
This is not only incorrect, but also confusing for users. It confused
me for a bit!"
* tag 'trace-v5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix userstacktrace option for instances
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- Make multiqueue devices which use the managed interrupt affinity
infrastructure work on PowerPC/Pseries. PowerPC does not use the
generic infrastructure for setting up PCI/MSI interrupts and the
multiqueue changes failed to update the legacy PCI/MSI
infrastructure. Make this work by passing the affinity setup
information down to the mapping and allocation functions.
- Move Jason Cooper from MAINTAINERS to CREDITS as his mail is
bouncing and he's not reachable. We hope all is well with him and
say thanks for his work over the years"
* tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc/pseries: Pass MSI affinity to irq_create_mapping()
genirq/irqdomain: Add an irq_create_mapping_affinity() function
MAINTAINERS: Move Jason Cooper to CREDITS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.10:
- Three commits fixing possible missed TLB invalidations for
multi-threaded processes when CPUs are hotplugged in and out.
- A fix for a host crash triggerable by host userspace (qemu) in KVM
on Power9.
- A fix for a host crash in machine check handling when running HPT
guests on a HPT host.
- One commit fixing potential missed TLB invalidations when using the
hash MMU on Power9 or later.
- A regression fix for machines with CPUs on node 0 but no memory.
Thanks to Aneesh Kumar K.V, Cédric Le Goater, Greg Kurz, Milan
Mohanty, Milton Miller, Nicholas Piggin, Paul Mackerras, and Srikar
Dronamraju"
* tag 'powerpc-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCE
KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity check
powerpc/numa: Fix a regression on memoryless node 0
powerpc/64s: Trim offlined CPUs from mm_cpumasks
kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling
powerpc/64s/pseries: Fix hash tlbiel_all_isa300 for guest kernels
powerpc/64s: Fix hash ISA v3.0 TLBIEL instruction generation
|
|
When the instances were able to use their own options, the userstacktrace
option was left hardcoded for the top level. This made the instance
userstacktrace option bascially into a nop, and will confuse users that set
it, but nothing happens (I was confused when it happened to me!)
Cc: stable@vger.kernel.org
Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
* tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always check to put back before stamp when crossing pages
ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
ftrace: Fix updating FTRACE_FL_TRAMP
tracing: Fix alignment of static buffer
tracing: Remove WARN_ON in start_thread()
samples/ftrace: Mark my_tramp[12]? global
ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()
ring-buffer: Update write stamp with the correct ts
docs: bootconfig: Update file format on initrd image
tools/bootconfig: Align the bootconfig applied initrd image size to 4
tools/bootconfig: Fix to check the write failure correctly
tools/bootconfig: Fix errno reference after printf()
|
|
The kernel currently uses kmem_cache to allocate shadow call stacks,
which means an overflows may not be immediately detected and can
potentially result in another task's shadow stack to be overwritten.
This change switches SCS to use virtually mapped shadow stacks for
tasks, which increases shadow stack size to a full page and provides
more robust overflow detection, similarly to VMAP_STACK.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130233442.2562064-2-samitolvanen@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The current ring buffer logic checks to see if the updating of the event
buffer was interrupted, and if it is, it will try to fix up the before stamp
with the write stamp to make them equal again. This logic is flawed, because
if it is not interrupted, the two are guaranteed to be different, as the
current event just updated the before stamp before allocation. This
guarantees that the next event (this one or another interrupting one) will
think it interrupted the time updates of a previous event and inject an
absolute time stamp to compensate.
The correct logic is to always update the timestamps when traversing to a
new sub buffer.
Cc: stable@vger.kernel.org
Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
DYNAMIC_FTRACE_WITH_DIRECT_CALLS should depend on
DYNAMIC_FTRACE_WITH_REGS since we need ftrace_regs_caller().
Link: https://lkml.kernel.org/r/fc4b257ea8689a36f086d2389a9ed989496ca63a.1606412433.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: 763e34e74bb7d5c ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in
ftrace_get_addr_new() followed by the below message:
Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001)
The set of steps leading to this involved:
- modprobe ftrace-direct-too
- enable_probe
- modprobe ftrace-direct
- rmmod ftrace-direct <-- trigger
The problem turned out to be that we were not updating flags in the
ftrace record properly. From the above message about the trampoline
accounting being bad, it can be seen that the ftrace record still has
FTRACE_FL_TRAMP set though ftrace-direct module is going away. This
happens because we are checking if any ftrace_ops has the
FTRACE_FL_TRAMP flag set _before_ updating the filter hash.
The fix for this is to look for any _other_ ftrace_ops that also needs
FTRACE_FL_TRAMP.
Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
With 5.9 kernel on ARM64, I found ftrace_dump output was broken but
it had no problem with normal output "cat /sys/kernel/debug/tracing/trace".
With investigation, it seems coping the data into temporal buffer seems to
break the align binary printf expects if the static buffer is not aligned
with 4-byte. IIUC, get_arg in bstr_printf expects that args has already
right align to be decoded and seq_buf_bprintf says ``the arguments are saved
in a 32bit word array that is defined by the format string constraints``.
So if we don't keep the align under copy to temporal buffer, the output
will be broken by shifting some bytes.
This patch fixes it.
Link: https://lkml.kernel.org/r/20201125225654.1618966-1-minchan@kernel.org
Cc: <stable@vger.kernel.org>
Fixes: 8e99cf91b99bb ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This patch reverts commit 978defee11a5 ("tracing: Do a WARN_ON()
if start_thread() in hwlat is called when thread exists")
.start hook can be legally called several times if according
tracer is stopped
screen window 1
[root@localhost ~]# echo 1 > /sys/kernel/tracing/events/kmem/kfree/enable
[root@localhost ~]# echo 1 > /sys/kernel/tracing/options/pause-on-trace
[root@localhost ~]# less -F /sys/kernel/tracing/trace
screen window 2
[root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on
0
[root@localhost ~]# echo hwlat > /sys/kernel/debug/tracing/current_tracer
[root@localhost ~]# echo 1 > /sys/kernel/debug/tracing/tracing_on
[root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on
0
[root@localhost ~]# echo 2 > /sys/kernel/debug/tracing/tracing_on
triggers warning in dmesg:
WARNING: CPU: 3 PID: 1403 at kernel/trace/trace_hwlat.c:371 hwlat_tracer_start+0xc9/0xd0
Link: https://lkml.kernel.org/r/bd4d3e70-400d-9c82-7b73-a2d695e86b58@virtuozzo.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
In the slow path of __rb_reserve_next() a nested event(s) can happen
between evaluating the timestamp delta of the current event and updating
write_stamp via local_cmpxchg(); in this case the delta is not valid
anymore and it should be set to 0 (same timestamp as the interrupting
event), since the event that we are currently processing is not the last
event in the buffer.
Link: https://lkml.kernel.org/r/X8IVJcp1gRE+FJCJ@xps-13-7390
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lwn.net/Articles/831207
Fixes: a389d86f7fd0 ("ring-buffer: Have nested events still record running time stamp")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The write stamp, used to calculate deltas between events, was updated with
the stale "ts" value in the "info" structure, and not with the updated "ts"
variable. This caused the deltas between events to be inaccurate, and when
crossing into a new sub buffer, had time go backwards.
Link: https://lkml.kernel.org/r/20201124223917.795844-1-elavila@google.com
Cc: stable@vger.kernel.org
Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp")
Reported-by: "J. Avila" <elavila@google.com>
Tested-by: Daniel Mentz <danielmentz@google.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
There is currently no way to convey the affinity of an interrupt
via irq_create_mapping(), which creates issues for devices that
expect that affinity to be managed by the kernel.
In order to sort this out, rename irq_create_mapping() to
irq_create_mapping_affinity() with an additional affinity parameter that
can be passed down to irq_domain_alloc_descs().
irq_create_mapping() is re-implemented as a wrapper around
irq_create_mapping_affinity().
No functional change.
Fixes: e75eafb9b039 ("genirq/msi: Switch to new irq spreading infrastructure")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kurz <groug@kaod.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201126082852.1178497-2-lvivier@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two more places which invoke tracing from RCU disabled regions in the
idle path.
Similar to the entry path the low level idle functions have to be
non-instrumentable"
* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Fix intel_idle() vs tracing
sched/idle: Fix arch_cpu_idle() vs tracing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- do not lose trailing newline in pr_cont() calls
- two trivial fixes for a dead store and a config description
* tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: finalize records with trailing newlines
printk: remove unneeded dead-store assignment
init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description
|
|
|
|
Any record with a trailing newline (LOG_NEWLINE flag) cannot
be continued because the newline has been stripped and will
not be visible if the message is appended. This was already
handled correctly when committing in log_output() but was
not handled correctly when committing in log_store().
Fixes: f5f022e53b87 ("printk: reimplement log_cont using record extension")
Link: https://lore.kernel.org/r/20201126114836.14750-1-john.ogness@linutronix.de
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
powerpc/64s keeps a counter in the mm which counts bits set in
mm_cpumask as well as other things. This means it can't use generic code
to clear bits out of the mask and doesn't adjust the arch specific
counter.
Add an arch override that allows powerpc/64s to use
clear_tasks_mm_cpumask().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126102530.691335-4-npiggin@gmail.com
|
|
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
|
|
Architectures that support address tagging, such as arm64, may want to
expose fault address tag bits to the signal handler to help diagnose
memory errors. However, these bits have not been previously set,
and their presence may confuse unaware user applications. Therefore,
introduce a SA_EXPOSE_TAGBITS flag bit in sa_flags that a signal
handler may use to explicitly request that the bits are set.
The generic signal handler APIs expect to receive tagged addresses.
Architectures may specify how to untag addresses in the case where
SA_EXPOSE_TAGBITS is clear by defining the arch_untagged_si_addr
function.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://linux-review.googlesource.com/id/I16dd0ed2081f091fce97be0190cb8caa874c26cb
Link: https://lkml.kernel.org/r/13cf24d00ebdd8e1f55caf1821c7c29d54100191.1605904350.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Define a sa_flags bit, SA_UNSUPPORTED, which will never be supported
in the uapi. The purpose of this flag bit is to allow userspace to
distinguish an old kernel that does not clear unknown sa_flags bits
from a kernel that supports every flag bit.
In other words, if userspace does something like:
act.sa_flags |= SA_UNSUPPORTED;
sigaction(SIGSEGV, &act, 0);
sigaction(SIGSEGV, 0, &oldact);
and finds that SA_UNSUPPORTED remains set in oldact.sa_flags, it means
that the kernel cannot be trusted to have cleared unknown flag bits
from sa_flags, so no assumptions about flag bit support can be made.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ic2501ad150a3a79c1cf27fb8c99be342e9dffbcb
Link: https://lkml.kernel.org/r/bda7ddff8895a9bc4ffc5f3cf3d4d37a32118077.1605582887.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Previously we were not clearing non-uapi flag bits in
sigaction.sa_flags when storing the userspace-provided sa_flags or
when returning them via oldact. Start doing so.
This allows userspace to detect missing support for flag bits and
allows the kernel to use non-uapi bits internally, as we are already
doing in arch/x86 for two flag bits. Now that this change is in
place, we no longer need the code in arch/x86 that was hiding these
bits from userspace, so remove it.
This is technically a userspace-visible behavior change for sigaction, as
the unknown bits returned via oldact.sa_flags are no longer set. However,
we are free to define the behavior for unknown bits exactly because
their behavior is currently undefined, so for now we can define the
meaning of each of them to be "clear the bit in oldact.sa_flags unless
the bit becomes known in the future". Furthermore, this behavior is
consistent with OpenBSD [1], illumos [2] and XNU [3] (FreeBSD [4] and
NetBSD [5] fail the syscall if unknown bits are set). So there is some
precedent for this behavior in other kernels, and in particular in XNU,
which is probably the most popular kernel among those that I looked at,
which means that this change is less likely to be a compatibility issue.
Link: [1] https://github.com/openbsd/src/blob/f634a6a4b5bf832e9c1de77f7894ae2625e74484/sys/kern/kern_sig.c#L278
Link: [2] https://github.com/illumos/illumos-gate/blob/76f19f5fdc974fe5be5c82a556e43a4df93f1de1/usr/src/uts/common/syscall/sigaction.c#L86
Link: [3] https://github.com/apple/darwin-xnu/blob/a449c6a3b8014d9406c2ddbdc81795da24aa7443/bsd/kern/kern_sig.c#L480
Link: [4] https://github.com/freebsd/freebsd/blob/eded70c37057857c6e23fae51f86b8f8f43cd2d0/sys/kern/kern_sig.c#L699
Link: [5] https://github.com/NetBSD/src/blob/3365779becdcedfca206091a645a0e8e22b2946e/sys/kern/sys_sig.c#L473
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://linux-review.googlesource.com/id/I35aab6f5be932505d90f3b3450c083b4db1eca86
Link: https://lkml.kernel.org/r/878dbcb5f47bc9b11881c81f745c0bef5c23f97f.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A couple of scheduler fixes:
- Make the conditional update of the overutilized state work
correctly by caching the relevant flags state before overwriting
them and checking them afterwards.
- Fix a data race in the wakeup path which caused loadavg on ARM64
platforms to become a random number generator.
- Fix the ordering of the iowaiter accounting operations so it can't
be decremented before it is incremented.
- Fix a bug in the deadline scheduler vs. priority inheritance when a
non-deadline task A has inherited the parameters of a deadline task
B and then blocks on a non-deadline task C.
The second inheritance step used the static deadline parameters of
task A, which are usually 0, instead of further propagating task
B's parameters. The zero initialized parameters trigger a bug in
the deadline scheduler"
* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix priority inheritance with multiple scheduling classes
sched: Fix rq->nr_iowait ordering
sched: Fix data-race in wakeup
sched/fair: Fix overutilized update in enqueue_task_fair()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single fix for lockdep which makes the recursion protection cover
graph lock/unlock"
* tag 'locking-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Put graph lock/unlock under lock_recursion protection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This gets the seccomp selftests running again on powerpc and sh, and
fixes an audit reporting oversight noticed in both seccomp and ptrace.
- Fix typos in seccomp selftests on powerpc and sh (Kees Cook)
- Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël
Salaün)"
* tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: sh: Fix register names
selftests/seccomp: powerpc: Fix typo in macro variable name
seccomp: Set PF_SUPERPRIV when checking capability
ptrace: Set PF_SUPERPRIV when checking capability
|
|
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc5, including fixes from the WiFi
(mac80211), can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid
crash
- lan743x:
- prevent interrupt storm on open
- fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths, mostly
detected by the Hulk Robot"
* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
net/smc: fix matching of existing link groups
ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
libbpf: Fix VERSIONED_SYM_COUNT number parsing
net/mlx4_core: Fix init_hca fields offset
atm: nicstar: Unmap DMA on send error
page_frag: Recover from memory pressure
net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
mlxsw: core: Use variable timeout for EMAD retries
mlxsw: Fix firmware flashing
net: Have netpoll bring-up DSA management interface
atl1e: fix error return code in atl1e_probe()
atl1c: fix error return code in atl1c_probe()
ah6: fix error return code in ah6_input()
net: usb: qmi_wwan: Set DTR quirk for MR400
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
...
|
|
Alexei Starovoitov says:
====================
1) libbpf should not attempt to load unused subprogs, from Andrii.
2) Make strncpy_from_user() mask out bytes after NUL terminator, from Daniel.
3) Relax return code check for subprograms in the BPF verifier, from Dmitrii.
4) Fix several sockmap issues, from John.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
libbpf: Fix VERSIONED_SYM_COUNT number parsing
bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list
bpf, sockmap: Handle memory acct if skb_verdict prog redirects to self
bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self
bpf, sockmap: Use truesize with sk_rmem_schedule()
bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect
bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made
selftests/bpf: Fix error return code in run_getsockopt_test()
bpf: Relax return code check for subprograms
tools, bpftool: Add missing close before bpftool net attach exit
MAINTAINERS/bpf: Update Andrii's entry.
selftests/bpf: Fix unused attribute usage in subprogs_unused test
bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_id
bpf: Fix passing zero to PTR_ERR() in bpf_btf_printf_prepare
libbpf: Don't attempt to load unused subprog as an entry-point BPF program
====================
Link: https://lore.kernel.org/r/20201119200721.288-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a mutex_unlock() issue where before copy_from_user() is
not called mutex_locked.
Fixes: 4b1a29a7f542 ("error-injection: Support fault injection framework")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/160570737118.263807.8358435412898356284.stgit@devnote2
|
|
do_strncpy_from_user() may copy some extra bytes after the NUL
terminator into the destination buffer. This usually does not matter for
normal string operations. However, when BPF programs key BPF maps with
strings, this matters a lot.
A BPF program may read strings from user memory by calling the
bpf_probe_read_user_str() helper which eventually calls
do_strncpy_from_user(). The program can then key a map with the
destination buffer. BPF map keys are fixed-width and string-agnostic,
meaning that map keys are treated as a set of bytes.
The issue is when do_strncpy_from_user() overcopies bytes after the NUL
terminator, it can result in seemingly identical strings occupying
multiple slots in a BPF map. This behavior is subtle and totally
unexpected by the user.
This commit masks out the bytes following the NUL while preserving
long-sized stride in the fast path.
Fixes: 6ae08ae3dea2 ("bpf: Add probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/21efc982b3e9f2f7b0379eed642294caaa0c27a7.1605642949.git.dxu@dxuuu.xyz
|
|
Replace the use of security_capable(current_cred(), ...) with
ns_capable_noaudit() which set PF_SUPERPRIV.
Since commit 98f368e9e263 ("kernel: Add noaudit variant of
ns_capable()"), a new ns_capable_noaudit() helper is available. Let's
use it!
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Will Drewry <wad@chromium.org>
Cc: stable@vger.kernel.org
Fixes: e2cfabdfd075 ("seccomp: add system call filtering using BPF")
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201030123849.770769-3-mic@digikod.net
|
|
Commit 69f594a38967 ("ptrace: do not audit capability check when outputing
/proc/pid/stat") replaced the use of ns_capable() with
has_ns_capability{,_noaudit}() which doesn't set PF_SUPERPRIV.
Commit 6b3ad6649a4c ("ptrace: reintroduce usage of subjective credentials in
ptrace_has_cap()") replaced has_ns_capability{,_noaudit}() with
security_capable(), which doesn't set PF_SUPERPRIV neither.
Since commit 98f368e9e263 ("kernel: Add noaudit variant of ns_capable()"), a
new ns_capable_noaudit() helper is available. Let's use it!
As a result, the signature of ptrace_has_cap() is restored to its original one.
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: stable@vger.kernel.org
Fixes: 6b3ad6649a4c ("ptrace: reintroduce usage of subjective credentials in ptrace_has_cap()")
Fixes: 69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat")
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201030123849.770769-2-mic@digikod.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"A single commit that fixes a bug that was introduced a couple of merge
windows ago, but which rather more recently converged to an
agreed-upon fix. The bug is that interrupts can be incorrectly enabled
while holding an irq-disabled spinlock. This can of course result in
self-deadlocks.
The bug is a bit difficult to trigger. It requires that a preempted
task be blocking a preemptible-RCU grace period long enough to trigger
an RCU CPU stall warning. In addition, an interrupt must occur at just
the right time, and that interrupt's handler must acquire that same
irq-disabled spinlock. Still, a deadlock is a deadlock.
Furthermore, we do now have a fix, and that fix survives kernel test
robot, -next, and rcutorture testing. It has also been verified by
Sebastian as fixing the bug. Therefore..."
* 'urgent-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled
|
|
A warning was hit when running xfstests/generic/068 in a Hyper-V guest:
[...] ------------[ cut here ]------------
[...] DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled())
[...] WARNING: CPU: 2 PID: 1350 at kernel/locking/lockdep.c:5280 check_flags.part.0+0x165/0x170
[...] ...
[...] Workqueue: events pwq_unbound_release_workfn
[...] RIP: 0010:check_flags.part.0+0x165/0x170
[...] ...
[...] Call Trace:
[...] lock_is_held_type+0x72/0x150
[...] ? lock_acquire+0x16e/0x4a0
[...] rcu_read_lock_sched_held+0x3f/0x80
[...] __send_ipi_one+0x14d/0x1b0
[...] hv_send_ipi+0x12/0x30
[...] __pv_queued_spin_unlock_slowpath+0xd1/0x110
[...] __raw_callee_save___pv_queued_spin_unlock_slowpath+0x11/0x20
[...] .slowpath+0x9/0xe
[...] lockdep_unregister_key+0x128/0x180
[...] pwq_unbound_release_workfn+0xbb/0xf0
[...] process_one_work+0x227/0x5c0
[...] worker_thread+0x55/0x3c0
[...] ? process_one_work+0x5c0/0x5c0
[...] kthread+0x153/0x170
[...] ? __kthread_bind_mask+0x60/0x60
[...] ret_from_fork+0x1f/0x30
The cause of the problem is we have call chain lockdep_unregister_key()
-> <irq disabled by raw_local_irq_save()> lockdep_unlock() ->
arch_spin_unlock() -> __pv_queued_spin_unlock_slowpath() -> pv_kick() ->
__send_ipi_one() -> trace_hyperv_send_ipi_one().
Although this particular warning is triggered because Hyper-V has a
trace point in ipi sending, but in general arch_spin_unlock() may call
another function having a trace point in it, so put the arch_spin_lock()
and arch_spin_unlock() after lock_recursion protection to fix this
problem and avoid similiar problems.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201113110512.1056501-1-boqun.feng@gmail.com
|
|
Glenn reported that "an application [he developed produces] a BUG in
deadline.c when a SCHED_DEADLINE task contends with CFS tasks on nested
PTHREAD_PRIO_INHERIT mutexes. I believe the bug is triggered when a CFS
task that was boosted by a SCHED_DEADLINE task boosts another CFS task
(nested priority inheritance).
------------[ cut here ]------------
kernel BUG at kernel/sched/deadline.c:1462!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 12 PID: 19171 Comm: dl_boost_bug Tainted: ...
Hardware name: ...
RIP: 0010:enqueue_task_dl+0x335/0x910
Code: ...
RSP: 0018:ffffc9000c2bbc68 EFLAGS: 00010002
RAX: 0000000000000009 RBX: ffff888c0af94c00 RCX: ffffffff81e12500
RDX: 000000000000002e RSI: ffff888c0af94c00 RDI: ffff888c10b22600
RBP: ffffc9000c2bbd08 R08: 0000000000000009 R09: 0000000000000078
R10: ffffffff81e12440 R11: ffffffff81e1236c R12: ffff888bc8932600
R13: ffff888c0af94eb8 R14: ffff888c10b22600 R15: ffff888bc8932600
FS: 00007fa58ac55700(0000) GS:ffff888c10b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa58b523230 CR3: 0000000bf44ab003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? intel_pstate_update_util_hwp+0x13/0x170
rt_mutex_setprio+0x1cc/0x4b0
task_blocks_on_rt_mutex+0x225/0x260
rt_spin_lock_slowlock_locked+0xab/0x2d0
rt_spin_lock_slowlock+0x50/0x80
hrtimer_grab_expiry_lock+0x20/0x30
hrtimer_cancel+0x13/0x30
do_nanosleep+0xa0/0x150
hrtimer_nanosleep+0xe1/0x230
? __hrtimer_init_sleeper+0x60/0x60
__x64_sys_nanosleep+0x8d/0xa0
do_syscall_64+0x4a/0x100
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fa58b52330d
...
---[ end trace 0000000000000002 ]—
He also provided a simple reproducer creating the situation below:
So the execution order of locking steps are the following
(N1 and N2 are non-deadline tasks. D1 is a deadline task. M1 and M2
are mutexes that are enabled * with priority inheritance.)
Time moves forward as this timeline goes down:
N1 N2 D1
| | |
| | |
Lock(M1) | |
| | |
| Lock(M2) |
| | |
| | Lock(M2)
| | |
| Lock(M1) |
| (!!bug triggered!) |
Daniel reported a similar situation as well, by just letting ksoftirqd
run with DEADLINE (and eventually block on a mutex).
Problem is that boosted entities (Priority Inheritance) use static
DEADLINE parameters of the top priority waiter. However, there might be
cases where top waiter could be a non-DEADLINE entity that is currently
boosted by a DEADLINE entity from a different lock chain (i.e., nested
priority chains involving entities of non-DEADLINE classes). In this
case, top waiter static DEADLINE parameters could be null (initialized
to 0 at fork()) and replenish_dl_entity() would hit a BUG().
Fix this by keeping track of the original donor and using its parameters
when a task is boosted.
Reported-by: Glenn Elliott <glenn@aurora.tech>
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201117061432.517340-1-juri.lelli@redhat.com
|
|
schedule() ttwu()
deactivate_task(); if (p->on_rq && ...) // false
atomic_dec(&task_rq(p)->nr_iowait);
if (prev->in_iowait)
atomic_inc(&rq->nr_iowait);
Allows nr_iowait to be decremented before it gets incremented,
resulting in more dodgy IO-wait numbers than usual.
Note that because we can now do ttwu_queue_wakelist() before
p->on_cpu==0, we lose the natural ordering and have to further delay
the decrement.
Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/20201117093829.GD3121429@hirez.programming.kicks-ass.net
|
