| Age | Commit message (Collapse) | Author |
|---|
|
'fixes.2021.05.13a', 'kvfree_rcu.2021.05.10c', 'mmdumpobj.2021.05.10c', 'nocb.2021.05.12a', 'srcu.2021.05.12a', 'tasks.2021.05.18a' and 'torture.2021.05.10c' into HEAD
bitmaprange.2021.05.10c: Allow "all" for bitmap ranges.
doc.2021.05.10c: Documentation updates.
fixes.2021.05.13a: Miscellaneous fixes.
kvfree_rcu.2021.05.10c: kvfree_rcu() updates.
mmdumpobj.2021.05.10c: mem_dump_obj() updates.
nocb.2021.05.12a: RCU NOCB CPU updates, including limited deoffloading.
srcu.2021.05.12a: SRCU updates.
tasks.2021.05.18a: Tasks-RCU updates.
torture.2021.05.10c: Torture-test updates.
|
|
In some architectures, the no-op variant of show_rcu_tasks_gp_kthreads()
get "no previous prototype" compiler warnings. These are false positives
given that kernel/rcu/tasks.h is included only once. But why put up
with the compiler noise?
This commit therefore adds "static inline" to this definition to force
the compiler to accept this situation, while also moving it to its proper
place in kernel/rcu/rcu.h.
Reported-by: kernel test robot <lkp@intel.com>
[ paulmck: Update per Stephen Rothwell feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, rcu_torture_boost() runs CPU-bound at real-time priority
to force RCU priority inversions. It then checks that grace periods
progress during this CPU-bound time. If grace periods fail to progress,
it reports and RCU priority boosting failure.
However, it is possible (and sometimes does happen) that the grace period
fails to progress due to a CPU failing to pass through a quiescent state
for an extended time period (3.5 seconds by default). This can happen
due to vCPU preemption, long-running interrupts, and much else besides.
There is nothing that RCU priority boosting can do about these situations,
and so they should not be counted as RCU priority boosting failures.
This commit therefore checks for CPUs (as opposed to preempted tasks)
holding up a grace period, and flags the resulting RCU priority boosting
failures, but does not splat nor count them as errors. It does rate-limit
them to avoid flooding the console log.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
An srcu_struct structure that is initialized before rcu_init_geometry()
will have its srcu_node hierarchy based on CONFIG_NR_CPUS. Once
rcu_init_geometry() is called, this hierarchy is compressed as needed
for the actual maximum number of CPUs for this system.
Later on, that srcu_struct structure is confused, sometimes referring
to its initial CONFIG_NR_CPUS-based hierarchy, and sometimes instead
to the new num_possible_cpus() hierarchy. For example, each of its
->mynode fields continues to reference the original leaf rcu_node
structures, some of which might no longer exist. On the other hand,
srcu_for_each_node_breadth_first() traverses to the new node hierarchy.
There are at least two bad possible outcomes to this:
1) a) A callback enqueued early on an srcu_data structure (call it
*sdp) is recorded pending on sdp->mynode->srcu_data_have_cbs in
srcu_funnel_gp_start() with sdp->mynode pointing to a deep leaf
(say 3 levels).
b) The grace period ends after rcu_init_geometry() shrinks the
nodes level to a single one. srcu_gp_end() walks through the new
srcu_node hierarchy without ever reaching the old leaves so the
callback is never executed.
This is easily reproduced on an 8 CPUs machine with CONFIG_NR_CPUS >= 32
and "rcupdate.rcu_self_test=1". The srcu_barrier() after early tests
verification never completes and the boot hangs:
[ 5413.141029] INFO: task swapper/0:1 blocked for more than 4915 seconds.
[ 5413.147564] Not tainted 5.12.0-rc4+ #28
[ 5413.151927] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5413.159753] task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00004000
[ 5413.168099] Call Trace:
[ 5413.170555] __schedule+0x36c/0x930
[ 5413.174057] ? wait_for_completion+0x88/0x110
[ 5413.178423] schedule+0x46/0xf0
[ 5413.181575] schedule_timeout+0x284/0x380
[ 5413.185591] ? wait_for_completion+0x88/0x110
[ 5413.189957] ? mark_held_locks+0x61/0x80
[ 5413.193882] ? mark_held_locks+0x61/0x80
[ 5413.197809] ? _raw_spin_unlock_irq+0x24/0x50
[ 5413.202173] ? wait_for_completion+0x88/0x110
[ 5413.206535] wait_for_completion+0xb4/0x110
[ 5413.210724] ? srcu_torture_stats_print+0x110/0x110
[ 5413.215610] srcu_barrier+0x187/0x200
[ 5413.219277] ? rcu_tasks_verify_self_tests+0x50/0x50
[ 5413.224244] ? rdinit_setup+0x2b/0x2b
[ 5413.227907] rcu_verify_early_boot_tests+0x2d/0x40
[ 5413.232700] do_one_initcall+0x63/0x310
[ 5413.236541] ? rdinit_setup+0x2b/0x2b
[ 5413.240207] ? rcu_read_lock_sched_held+0x52/0x80
[ 5413.244912] kernel_init_freeable+0x253/0x28f
[ 5413.249273] ? rest_init+0x250/0x250
[ 5413.252846] kernel_init+0xa/0x110
[ 5413.256257] ret_from_fork+0x22/0x30
2) An srcu_struct structure that is initialized before rcu_init_geometry()
and used afterward will always have stale rdp->mynode references,
resulting in callbacks to be missed in srcu_gp_end(), just like in
the previous scenario.
This commit therefore causes init_srcu_struct_nodes to initialize the
geometry, if needed. This ensures that the srcu_node hierarchy is
properly built and distributed from the get-go.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Once srcu_init() is called, the SRCU core will make use of delayed
workqueues, which rely on timers. However init_timers() is called
several steps after rcu_init(). This means that a call_srcu() after
rcu_init() but before init_timers() would find itself within a dangerously
uninitialized timer core.
This commit therefore creates a separate call to srcu_init() after
init_timer() completes, which ensures that we stay in early SRCU mode
until timers are safe(r).
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
'kfree_rcu.2021.01.04a', 'mmdumpobj.2021.01.22a', 'nocb.2021.01.06a', 'rt.2021.01.04a', 'stall.2021.01.06a', 'torture.2021.01.12a' and 'tortureall.2021.01.06a' into HEAD
doc.2021.01.06a: Documentation updates.
fixes.2021.01.04b: Miscellaneous fixes.
kfree_rcu.2021.01.04a: kfree_rcu() updates.
mmdumpobj.2021.01.22a: Dump allocation point for memory blocks.
nocb.2021.01.06a: RCU callback offload updates and cblist segment lengths.
rt.2021.01.04a: Real-time updates.
stall.2021.01.06a: RCU CPU stall warning updates.
torture.2021.01.12a: Torture-test updates and polling SRCU grace-period API.
tortureall.2021.01.06a: Torture-test script updates.
|
|
This commit adds a lockdep_assert_irqs_disabled() call to the
helper macros that release the rcu_node structure's ->lock, namely
to raw_spin_unlock_rcu_node(), raw_spin_unlock_irq_rcu_node() and
raw_spin_unlock_irqrestore_rcu_node(). The point of this is to help track
down a situation where lockdep appears to be insisting that interrupts
are enabled while holding an rcu_node structure's ->lock.
Link: https://lore.kernel.org/lkml/20201111133813.GA81547@elver.google.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
At the end of the test and after rcu_torture_writer() stalls, rcutorture
invokes show_rcu_gp_kthreads() in order to dump out information on the
RCU grace-period kthread. This makes a lot of sense when testing vanilla
RCU, but not so much for the other flavors. This commit therefore allows
per-flavor kthread-dump functions to be specified.
[ paulmck: Apply feedback from kernel test robot <lkp@intel.com>. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This should make it harder for the kernel to corrupt the debug object
descriptor, used to call functions to fixup state and track debug objects,
by moving the structure to read-only memory.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815004027.2046113-3-swboyd@chromium.org
|
|
'rcu-tasks.2020.04.27a', 'stall.2020.04.27a' and 'torture.2020.05.07a' into HEAD
fixes.2020.04.27a: Miscellaneous fixes.
kfree_rcu.2020.04.27a: Changes related to kfree_rcu().
rcu-tasks.2020.04.27a: Addition of new RCU-tasks flavors.
stall.2020.04.27a: RCU CPU stall-warning updates.
torture.2020.05.07a: Torture-test updates.
|
|
This commit provides an rcutorture.stall_gp_kthread module parameter
to allow rcutorture to starve the grace-period kthread. This allows
testing the code that detects such starvation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Systems running CPU-bound real-time task do not want IPIs sent to CPUs
executing nohz_full userspace tasks. Battery-powered systems don't
want IPIs sent to idle CPUs in low-power mode. Unfortunately, RCU tasks
trace can and will send such IPIs in some cases.
Both of these situations occur only when the target CPU is in RCU
dyntick-idle mode, in other words, when RCU is not watching the
target CPU. This suggests that CPUs in dyntick-idle mode should use
memory barriers in outermost invocations of rcu_read_lock_trace()
and rcu_read_unlock_trace(), which would allow the RCU tasks trace
grace period to directly read out the target CPU's read-side state.
One challenge is that RCU tasks trace is not targeting a specific
CPU, but rather a task. And that task could switch from one CPU to
another at any time.
This commit therefore uses try_invoke_on_locked_down_task()
and checks for task_curr() in trc_inspect_reader_notrunning().
When this condition holds, the target task is running and cannot move.
If CONFIG_TASKS_TRACE_RCU_READ_MB=y, the new rcu_dynticks_zero_in_eqs()
function can be used to check if the specified integer (in this case,
t->trc_reader_nesting) is zero while the target CPU remains in that same
dyntick-idle sojourn. If so, the target task is in a quiescent state.
If not, trc_read_check_handler() must indicate failure so that the
grace-period kthread can take appropriate action or retry after an
appropriate delay, as the case may be.
With this change, given CONFIG_TASKS_TRACE_RCU_READ_MB=y, if a given
CPU remains idle or a given task continues executing in nohz_full mode,
the RCU tasks trace grace-period kthread will detect this without the
need to send an IPI.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds state for each RCU-tasks flavor to the rcutorture
writer stall output. The initial state is minimal, but you have to
start somewhere.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Fixes based on feedback from kbuild test robot. ]
|
|
This commit adds the definitions required to torture the tracing flavor
of RCU tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds the definitions required to torture the rude flavor of
RCU tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
'kfree_rcu.2020.02.20a', 'locktorture.2020.02.20a', 'ovld.2020.02.20a', 'rcu-tasks.2020.02.20a', 'srcu.2020.02.20a' and 'torture.2020.02.20a' into HEAD
doc.2020.02.27a: Documentation updates.
fixes.2020.03.21a: Miscellaneous fixes.
kfree_rcu.2020.02.20a: Updates to kfree_rcu().
locktorture.2020.02.20a: Lock torture-test updates.
ovld.2020.02.20a: Updates to callback-overload handling.
rcu-tasks.2020.02.20a: RCU-tasks updates.
srcu.2020.02.20a: SRCU updates.
torture.2020.02.20a: Torture-test updates.
|
|
In normal production, an RCU CPU stall warning at boottime is often
just as bad as at any other time. In fact, given the desire for fast
boot, any sort of long-term stall at boot is a bad idea. However,
heavy rcutorture testing on large hyperthreaded systems can generate
boottime RCU CPU stalls as a matter of course. This commit therefore
provides a kernel boot parameter that suppresses reporting of boottime
RCU CPU stall warnings and similarly of rcutorture writer stalls.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The for_each_leaf_node_cpu_mask() and for_each_leaf_node_possible_cpu()
macros must be invoked only on leaf rcu_node structures. Failing to
abide by this restriction can result in infinite loops on systems with
more than 64 CPUs (or for more than 32 CPUs on 32-bit systems). This
commit therefore adds WARN_ON_ONCE() calls to make misuse of these two
macros easier to debug.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
'kfree_rcu.2020.01.24a', 'list.2020.01.10a', 'preempt.2020.01.24a' and 'torture.2019.12.09a' into HEAD
doc.2019.12.10a: Documentations updates
exp.2019.12.09a: Expedited grace-period updates
fixes.2020.01.24a: Miscellaneous fixes
kfree_rcu.2020.01.24a: Batch kfree_rcu() work
list.2020.01.10a: RCU-protected-list updates
preempt.2020.01.24a: Preemptible RCU updates
torture.2019.12.09a: Torture-test updates
|
|
The C preprocessor macros SRCU and TINY_RCU should instead be CONFIG_SRCU
and CONFIG_TINY_RCU, respectively in the #f in kernel/rcu/rcu.h. But
there is no harm when "TINY_RCU" is wrongly used, which are always
non-defined, which makes "!defined(TINY_RCU)" always true, which means
the code block is always included, and the included code block doesn't
cause any compilation error so far in CONFIG_TINY_RCU builds. It is
also the reason this change should not be taken in -stable.
This commit adds the needed "CONFIG_" prefix to both macros.
Not for -stable.
Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit removes kfree_rcu() special-casing and the lazy-callback
handling from Tree RCU. It moves some of this special casing to Tiny RCU,
the removal of which will be the subject of later commits.
This results in a nice negative delta.
Suggested-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ paulmck: Add slab.h #include, thanks to kbuild test robot <lkp@intel.com>. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently PREEMPT_RCU and TREE_RCU are mutually exclusive Kconfig
options. But PREEMPT_RCU actually specifies a kind of TREE_RCU,
namely a preemptible TREE_RCU. This commit therefore makes PREEMPT_RCU
be a modifer to the TREE_RCU Kconfig option. This has the benefit of
simplifying several of the #if expressions that formerly needed to
check both, but now need only check one or the other.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
'replace.2019.10.30a', 'torture.2019.10.05a' and 'lkmm.2019.10.05a' into HEAD
doc.2019.10.29a: RCU documentation updates.
fixes.2019.10.30a: RCU miscellaneous fixes.
nohz.2019.10.28a: RCU NO_HZ and NO_HZ_FULL updates.
replace.2019.10.30a: Replace rcu_swap_protected() with rcu_replace().
torture.2019.10.05a: RCU torture-test updates.
lkmm.2019.10.05a: Linux kernel memory model updates.
|
|
New tools bring new warnings, and with v5.3 comes:
kernel/rcu/srcutree.c: warning: 'levelspread[<U aa0>]' may be used uninitialized in this function [-Wuninitialized]: => 121:34
This commit suppresses this warning by initializing the full array
to INT_MIN, which will result in failures should any out-of-bounds
references appear.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The function rcutorture_record_progress() is declared in rcu.h, but is
never used. This commit therefore removes rcutorture_record_progress()
to clean code.
Signed-off-by: Ethan Hansen <1ethanhansen@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a rcu_cpu_stall_ftrace_dump kernel boot parameter, that,
when set, causes the trace buffer to be dumped after an RCU CPU stall
warning is printed. This kernel boot parameter is disabled by default,
maintaining compatibility with previous behavior.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
|
|
I have been showing off a trivial RCU implementation for non-preemptive
environments for some time now:
#define rcu_read_lock()
#define rcu_read_unlock()
#define rcu_dereference(p) READ_ONCE(p)
#define rcu_assign_pointer(p, v) smp_store_release(&(p), (v))
void synchronize_rcu(void)
{
int cpu;
for_each_online_cpu(cpu)
sched_setaffinity(current->pid, cpumask_of(cpu));
}
Trivial or not, as the old saying goes, "if it ain't tested, it don't
work!". This commit therefore adds a "trivial" flavor to rcutorture
and a corresponding TRIVIAL test scenario. This variant does not handle
CPU hotplug, which is unconditionally enabled on x86 for post-v5.1-rc3
kernels, which is why the TRIVIAL.boot says "rcutorture.onoff_interval=0".
This commit actually does handle CONFIG_PREEMPT=y kernels, but only
because it turns back the Linux-kernel clock in order to provide these
alternative definitions (or the moral equivalent thereof):
#define rcu_read_lock() preempt_disable()
#define rcu_read_unlock() preempt_enable()
In CONFIG_PREEMPT=n kernels without debugging, these are equivalent to
empty macros give or take a compiler barrier. However, the have been
successfully tested with actual empty macros as well.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Fix symbol issue reported by kbuild test robot <lkp@intel.com>. ]
[ paulmck: Work around sched_setaffinity() issue noted by Andrea Parri. ]
[ paulmck: Add rcutorture.shuffle_interval=0 to TRIVIAL.boot to fix
interaction with shuffler task noted by Peter Zijlstra. ]
Tested-by: Andrea Parri <andrea.parri@amarulasolutions.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The major changes in this tracing update includes:
- Removal of non-DYNAMIC_FTRACE from 32bit x86
- Removal of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on
config options
And other minor fixes and clean ups"
* tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
x86: Hide the int3_emulate_call/jmp functions from UML
livepatch: Remove klp_check_compiler_support()
ftrace/x86: Remove mcount support
ftrace/x86_32: Remove support for non DYNAMIC_FTRACE
tracing: Simplify "if" macro code
tracing: Fix documentation about disabling options using trace_options
tracing: Replace kzalloc with kcalloc
tracing: Fix partial reading of trace event's id file
tracing: Allow RCU to run between postponed startup tests
tracing: Fix white space issues in parse_pred() function
tracing: Eliminate const char[] auto variables
ring-buffer: Fix mispelling of Calculate
tracing: probeevent: Fix to make the type of $comm string
tracing: probeevent: Do not accumulate on ret variable
tracing: uprobes: Re-enable $comm support for uprobe events
ftrace/x86_64: Emulate call function while updating in breakpoint handler
x86_64: Allow breakpoints to emulate call instructions
x86_64: Add gap to int3 to allow for call emulation
tracing: kdb: Allow ftdump to skip all but the last few entries
tracing: Add trace_total_entries() / trace_total_entries_cpu()
...
|
|
When CONFIG_RCU_TRACE is not set, all these tracepoints are defined as
do-nothing macro.
We'd better make those inline functions that take proper arguments.
As RCU_TRACE() is defined as do-nothing marco as well when
CONFIG_RCU_TRACE is not set, so we can clean it up.
Link: http://lkml.kernel.org/r/1553602391-11926-4-git-send-email-laoar.shao@gmail.com
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The RCU CPU stall-warning code for normal grace periods is currently
scattered across three files, due to earlier Tiny RCU support for RCU
CPU stall warnings and for old Kconfig options that have long since
been retired. Given that it is hard for the lead RCU maintainer to
find relevant stall-warning code, it would be good to consolidate it.
This commit starts this process by moving stall-warning code from
kernel/rcu/update.c to a new kernel/rcu/tree_stall.h file.
Note that the definitions of rcu_cpu_stall_suppress and
rcu_cpu_stall_timeout must remain in kernel/rcu/update.h to provide
compatibility for kernel boot parameter lists.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
|
|
'spdx.2019.02.09a', 'srcu.2019.01.26a' and 'torture.2019.01.26a' into HEAD
doc.2019.01.26a: Documentation updates.
fixes.2019.01.26a: Miscellaneous fixes.
sil.2019.01.26a: Removal of a few more spin_is_locked() instances.
spdx.2019.02.09a: Add SPDX identifiers to RCU files
srcu.2019.01.26a: SRCU updates.
torture.2019.01.26a: Torture-test updates.
|
|
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This commit updates the DYNTICK_IRQ_NONIDLE header comment to remove
the obsolete commentary about unmatched rcu_irq_{enter,exit}().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
|
|
Now that the RCU flavors have been consolidated, RCU_BH_FLAVOR and
RCU_SCHED_FLAVOR are no longer used. This commit therefore saves a
few lines by removing them.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
|
|
This commit adds an OOM notifier during rcutorture forward-progress
testing. If this notifier is invoked, it dumps out some grace-period
state to help debug the forward-progress problem.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
|
|
This commit affinities the forward-progress tests to avoid hogging a
housekeeping CPU on the theory that the offloaded callbacks will be
running on those housekeeping CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Fix NULL-pointer issue located by kbuild test robot. ]
Tested-by: Rong Chen <rong.a.chen@intel.com>
|
|
and 'torture.2018.08.29a' into HEAD
doc.2018.08.30a: Documentation updates
dynticks.2018.08.30b: RCU flavor consolidation updates and cleanups
srcu.2018.08.30b: SRCU updates
torture.2018.08.29a: Torture-test updates
|
|
Event tracing is moving to SRCU in order to take advantage of the fact
that SRCU may be safely used from idle and even offline CPUs. However,
event tracing can invoke call_srcu() very early in the boot process,
even before workqueue_init_early() is invoked (let alone rcu_init()).
Therefore, call_srcu()'s attempts to queue work fail miserably.
This commit therefore detects this situation, and refrains from attempting
to queue work before rcu_init() time, but does everything else that it
would have done, and in addition, adds the srcu_struct to a global list.
The rcu_init() function now invokes a new srcu_init() function, which
is empty if CONFIG_SRCU=n. Otherwise, srcu_init() queues work for
each srcu_struct on the list. This all happens early enough in boot
that there is but a single CPU with interrupts disabled, which allows
synchronization to be dispensed with.
Of course, the queued work won't actually be invoked until after
workqueue_init() is invoked, which happens shortly after the scheduler
is up and running. This means that although call_srcu() may be invoked
any time after per-CPU variables have been set up, there is still a very
narrow window when synchronize_srcu() won't work, and this window
extends from the time that the scheduler starts until the time that
workqueue_init() returns. This can be fixed in a manner similar to
the fix for synchronize_rcu_expedited() and friends, but until someone
actually needs to use synchronize_srcu() during this window, this fix
is added churn for no benefit.
Finally, note that Tree SRCU's new srcu_init() function invokes
queue_work() rather than the queue_delayed_work() function that is
invoked post-boot. The reason is that queue_delayed_work() will (as you
would expect) post a timer, and timers have not yet been initialized.
So use of queue_work() avoids the complaints about use of uninitialized
spinlocks that would otherwise result. Besides, some delay is already
provide by the aforementioned fact that the queued work won't actually
be invoked until after the scheduler is up and running.
Requested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This commit adds rcu_head_init() and rcu_head_after_call_rcu() functions
to help RCU users detect when another CPU has passed the specified
rcu_head structure and function to call_rcu(). The rcu_head_init()
should be invoked before making the structure visible to RCU readers,
and then the rcu_head_after_call_rcu() may be invoked from within
an RCU read-side critical section on an rcu_head structure that
was obtained during a traversal of the data structure in question.
The rcu_head_after_call_rcu() function will return true if the rcu_head
structure has already been passed (with the specified function) to
call_rcu(), otherwise it will return false.
If rcu_head_init() has not been invoked on the rcu_head structure
or if the rcu_head (AKA callback) has already been invoked, then
rcu_head_after_call_rcu() will do WARN_ON_ONCE().
Reported-by: NeilBrown <neilb@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Apply neilb naming feedback. ]
|
|
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit removes rcu_sched_get_gp_seq(), rcu_bh_get_gp_seq(),
rcu_exp_batches_completed_sched(), rcu_sched_force_quiescent_state(),
and rcu_bh_force_quiescent_state(), which are no longer used because
rcutorture no longer does "rcu_bh" and "rcu_sched" torture types.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
There now is only one rcu_state structure in a given build of the Linux
kernel, so there is no need to pass it as a parameter to RCU's rcu_node
tree's accessor macros. This commit therefore removes the rsp parameter
from those macros in kernel/rcu/rcu.h, and removes some now-unused rsp
local variables while in the area.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
fixes1.2018.07.12b: Post-gp_seq miscellaneous fixes
torture1.2018.07.12b: Post-gp_seq torture-test updates
|
|
When rcutorture is built in to the kernel, an earlier patch detects
that and raises the priority of RCU's kthreads to allow rcutorture's
RCU priority boosting tests to succeed.
However, if rcutorture is built as a module, those priorities must be
raised manually via the rcutree.kthread_prio kernel boot parameter.
If this manual step is not taken, rcutorture's RCU priority boosting
tests will fail due to kthread starvation. One approach would be to
raise the default priority, but that risks breaking existing users.
Another approach would be to allow runtime adjustment of RCU's kthread
priorities, but that introduces numerous "interesting" race conditions.
This patch therefore instead detects too-low priorities, and prints a
message and disables the RCU priority boosting tests in that case.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Back when RCU had a debugfs interface, there was a test version and
sequence number that allowed associating debugfs data with a particular
test run, where the test run started with modprobe and ended with rmmod,
which was how tests were run back on the old ABAT system within IBM.
But rcutorture testing no longer runs on ABAT, and there is no longer an
RCU debugfs interface, so there is no longer any need for test versions
and sequence numbers.
This commit therefore removes the rcutorture_record_test_transition()
and rcutorture_record_progress() functions, and along with them the
rcutorture_testseq and rcutorture_vernum variables that they update.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The current implementatation of rcu_seq_diff() follows tradition in
providing a rough-and-ready approximation of the number of elapsed grace
periods between the two rcu_seq values. However, this difference is
used to flag RCU-failure "near misses", which can be a valuable debugging
aid, so more exactitude would be an improvement. This commit therefore
improves the accuracy of rcu_seq_diff().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
rcu_seq_snap may be tricky to decipher. Lets document how it works with
an example to make it easier.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Shrink comment as suggested by Peter Zijlstra. ]
|
|
The new ->gq_seq grace-period sequence numbers must be shifted down,
which give artifacts when these numbers wrap. This commit therefore
enables rcutorture and rcuperf to handle grace-period sequence numbers
even if they do wrap. It does this by allowing a special subtraction
function to be specified, and this function subtracts before shifting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
In the old days of ->gpnum and ->completed, the code requesting a new
grace period checked to see if that grace period had already started,
bailing early if so. The new-age ->gp_seq approach instead checks
whether the grace period has already finished. A compensating change
pushed the requested grace period down to the bottom of the tree, thus
reducing lock contention and even eliminating it in some cases. But why
not further reduce contention, especially on large systems, by doing both,
especially given that the cost of doing both is extremely small?
This commit therefore adds a new rcu_seq_started() function that checks
whether a specified grace period has already started. It then uses
this new function in place of rcu_seq_done() in the rcu_start_this_gp()
function's funnel locking code.
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
SRCU has long used ->srcu_gp_seq, and now RCU uses ->gp_seq. This
commit therefore moves the rcutorture_get_gp_data() function from
a ->gpnum / ->completed pair to ->gp_seq.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
