summaryrefslogtreecommitdiff
path: root/include/linux/dw_dmac.h
AgeCommit message (Collapse)Author
2014-09-11dmaengine: dw: move dw_dmac.h to where it belongs toAndy Shevchenko
There is a common storage for platform data related structures and definitions inside kernel source tree. The patch moves file from include/linux to include/linux/platform_data and renames it acoordingly. The users are also updated. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [For the arch/avr32/.* and .*sound/atmel.*] Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-02-17dma: dw: remove leftovers in the comment blocksAndy Shevchenko
There is couple of leftovers in the comment blocks. This patch modifies the comments accordingly. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-28dmaengine: dw_dmac: move to generic DMA bindingArnd Bergmann
The original device tree binding for this driver, from Viresh Kumar unfortunately conflicted with the generic DMA binding, and did not allow to completely seperate slave device configuration from the controller. This is an attempt to replace it with an implementation of the generic binding, but it is currently completely untested, because I do not have any hardware with this particular controller. The patch applies on top of the slave-dma tree, which contains both the base support for the generic DMA binding, as well as the earlier attempt from Viresh. Both of these are currently not merged upstream however. This version incorporates feedback from Viresh Kumar, Andy Shevchenko and Russell King. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-07dmaengine: dw_dmac: Enhance device tree supportViresh Kumar
dw_dmac driver already supports device tree but it used to have its platform data passed the non-DT way. This patch does following changes: - pass platform data via DT, non-DT way still takes precedence if both are used. - create generic filter routine - Earlier slave information was made available by slave specific filter routines in chan->private field. Now, this information would be passed from within dmac DT node. Slave drivers would now be required to pass bus_id (a string) as parameter to this generic filter(), which would be compared against the slave data passed from DT, by the generic filter routine. - Update binding document Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Fixed __devinit usage] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2013-01-06dmaengine: dw_dmac: Update documentation style comments for dw_dma_platform_dataViresh Kumar
Documentation style comments were missing for few fields in struct dw_dma_platform_data. Add these. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-27dw_dmac: autoconfigure data_width or get it via platform dataAndy Shevchenko
Not all of the controllers support the 64 bit data width. Make it configurable via platform data. The driver will try to get a value from the component parameters, otherwise it will use the platform data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-27dw_dmac: autoconfigure block_size or use platform dataAndy Shevchenko
The maximum block size is a configurable parameter for the chip. So, driver will try to get it from the encoded component parameters. Otherwise it will come from the platform data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22dmaengine/dw_dmac: Remove unused fields in struct dw_dma_slaveViresh Kumar
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-27dmaengine: move drivers to dma_transfer_directionVinod Koul
fixup usage of dma direction by introducing dma_transfer_direction, this patch moves dma/drivers/* to use new enum Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Yong Wang <yong.y.wang@intel.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Cc: Boojin Kim <boojin.kim@samsung.com> Cc: Barry Song <Baohua.Song@csr.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-05-25dmaengine/dw_dmac: Update maintainer-shipViresh Kumar
Nobody is currently maintaining dw_dmac. We are using dw_dmac for SPEAr13xx and are currently maintaining it. After discussing with Vinod, sending this patch to update maintainer-ship of dw_dmac. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-07dw_dmac: Allow src/dst msize & flow controller to be configured at runtimeViresh KUMAR
Msize or Burst Size is peripheral dependent in case of prep_slave_sg and cyclic_prep transfers, and in case of memcpy transfers it is platform dependent. So msize configuration must come from platform data. Also some peripherals (ex: JPEG), need to be flow controller for dma transfers, so this information in case of slave_sg & cyclic_prep transfers must come from platform data. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-07dw_dmac: Changing type of src_master and dest_master to u8.Viresh Kumar
src_master & dest_master don't required u32 as they have values limited to u8 only. Also their description is missing from doc style comment. This patch fixes above mentioned issues. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-07dw_dmac: Pass Channel Priority from platform_dataViresh Kumar
In Synopsys designware, channel priority is programmable. This patch adds support for passing channel priority through platform data. By default Ascending channel priority will be followed, i.e. channel 0 will get highest priority and channel 7 will get lowest. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-07dw_dmac: Pass Channel Allocation Order from platform_dataViresh Kumar
In SPEAr Platform channels 4-7 have more Fifo depth. So we must get better channel first. This patch introduces concept of channel allocation order in dw_dmac. If user doesn't pass anything or 0, than normal (ascending) channel allocation will follow, else channels will be allocated in descending order. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-01-29dmaengine/dw_dmac: provide a mechanism to indicate private devicesJamie Iles
Some platforms (e.g. Picochip PC3XX) have multiple DMA controllers where some may be used for slave transfers and others for general purpose memcpy type transfers. Add a .is_private boolean to the platform data structure so that controllers can be marked as private so that the DMA_PRIVATE capability will be set for that controller. Signed-off-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-29dmaengine/dw_dmac: allow src/dst masters to be configured at runtimeJamie Iles
Some platforms have flexible mastering capabilities and this needs to be selected at runtime. If the platform has specified private data in the form of the dw_dma_slave then fetch the source and destination masters from here. If this isn't present, default to the previous of 0 and 1. v2: cleanup whitespace Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-04-01dw_dmac: add cyclic API to DW DMA driverHans-Christian Egtvedt
This patch adds a cyclic DMA interface to the DW DMA driver. This is very useful if you want to use the DMA controller in combination with a sound device which uses cyclic buffers. Using a DMA channel for cyclic DMA will disable the possibility to use it as a normal DMA engine until the user calls the cyclic free function on the DMA channel. Also a cyclic DMA list can not be prepared if the channel is already active. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06atmel-mci: convert to dma_request_channel and down-level dma_slaveDan Williams
dma_request_channel provides an exclusive channel, so we no longer need to pass slave data through dmaengine. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-08dmaengine: Driver for the Synopsys DesignWare DMA controllerHaavard Skinnemoen
This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>