summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-10-10drm/msm/mdp5: Remove set but not used variable 'hw_cfg' in modeset_initzhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c: In function modeset_init: drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c:458:28: warning: variable hw_cfg set but not used [-Wunused-but-set-variable] It is not used since commit 36d1364abbed ("drm/msm/mdp5: Clean up interface assignment") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1570630403-92371-1-git-send-email-zhengbin13@huawei.com
2019-10-10drm/msm/dsi: Remove set but not used variable 'lp'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/dsi/dsi_host.c: In function dsi_cmd_dma_rx: drivers/gpu/drm/msm/dsi/dsi_host.c:1302:7: warning: variable lp set but not used [-Wunused-but-set-variable] It is not used since commit a689554ba6ed ("drm/msm: Initial add DSI connector support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1570690506-83287-5-git-send-email-zhengbin13@huawei.com
2019-10-10drm/msm/dsi: Remove set but not used variable 'lpx'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c: In function msm_dsi_dphy_timing_calc_v2: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:156:17: warning: variable lpx set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c: In function msm_dsi_dphy_timing_calc_v3: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:273:17: warning: variable lpx set but not used [-Wunused-but-set-variable] 'lpx' in msm_dsi_dphy_timing_calc_v2 is not used since commit a4df68fa232e ("drm/msm/dsi: Add new method to calculate 14nm PHY timings") 'lpx' in msm_dsi_dphy_timing_calc_v3 is not used since commit f1fa7ff44056 ("drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1570690506-83287-4-git-send-email-zhengbin13@huawei.com
2019-10-10drm/msm/mdp5: Remove set but not used variable 'hw_cfg' in blend_setupzhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c: In function blend_setup: drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:225:28: warning: variable hw_cfg set but not used [-Wunused-but-set-variable] It is not used since commit 14be3200cd5f ("drm/msm: rename mdp->disp") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1570690506-83287-3-git-send-email-zhengbin13@huawei.com
2019-10-10drm/msm/mdp5: Remove set but not used variable 'fmt'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function mdp5_smp_calculate: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:134:6: warning: variable fmt set but not used [-Wunused-but-set-variable] It is not used since commit 24c478ead0bf ("drm/fourcc: Pass the format_info pointer to drm_format_plane_cpp") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1570690506-83287-2-git-send-email-zhengbin13@huawei.com
2019-10-10drm/msm: Sanitize the modeset_is_locked checks in dpuSean Paul
As Daniel mentions in his email [1], non-blocking commits don't hold the modeset locks, so we can safely access state as long as these functions are in the commit path. So remove the WARN_ON in dpu_kms_encoder_enable. In dpu_crtc_get_intf_mode, things are a bit more complicated. So keep the WARN_ON, but add a comment explaining the situation and hope someone comes along and fixes the issue. [1]- https://lists.freedesktop.org/archives/dri-devel/2019-October/239441.html Link to v1: https://patchwork.freedesktop.org/patch/msgid/20191010151351.126735-1-sean@poorly.run Changes in v2: - Restored the WARN_ON in get_intf_mode and added a clarifying comment (Daniel) Fixes: 1dfdb0e107db ("drm/msm: dpu: Add modeset lock checks where applicable") Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Rob Clark <robdclark@chromium.org> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191010181801.186069-1-sean@poorly.run
2019-10-07drm/msm/dpu: Remove set but not used variables 'mode', 'dpu_kms', 'priv'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function dpu_encoder_virt_disable: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1199:27: warning: variable mode set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function _dpu_encoder_init_debugfs: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1963:18: warning: variable dpu_kms set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function dpu_encoder_frame_done_timeout: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:2183:26: warning: variable priv set but not used [-Wunused-but-set-variable] They are not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove set but not used variables 'cmd_enc', 'priv'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_ctl_start_irq: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:136:31: warning: variable cmd_enc set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_irq_control: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:328:31: warning: variable cmd_enc set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_tearcheck_config: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:367:26: warning: variable priv set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_wait_for_tx_complete: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:662:31: warning: variable cmd_enc set but not used [-Wunused-but-set-variable] They are not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove set but not used variables 'dpu_cstate', 'priv'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c: In function dpu_core_perf_crtc_release_bw: drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:248:25: warning: variable dpu_cstate set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c: In function dpu_core_perf_crtc_update: drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:337:26: warning: variable priv set but not used [-Wunused-but-set-variable] They are not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove set but not used variable 'priv' in dpu_core_irq.czhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c: In function dpu_core_irq_preinstall: drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c:354:26: warning: variable priv set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c: In function dpu_core_irq_uninstall: drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c:390:26: warning: variable priv set but not used [-Wunused-but-set-variable] It is not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove set but not used variable 'priv' in dpu_encoder_phys_vid.czhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c: In function dpu_encoder_phys_vid_disable: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c:566:26: warning: variable priv set but not used [-Wunused-but-set-variable] It is not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove set but not used variable 'priv' in dpu_kms.czhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function _dpu_danger_signal_status: drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:80:26: warning: variable priv set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function dpu_kms_prepare_commit: drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:271:26: warning: variable priv set but not used [-Wunused-but-set-variable] It is not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm: include linux/sched/task.hArnd Bergmann
Without this header file, compile-testing may run into a missing declaration: drivers/gpu/drm/msm/msm_gpu.c:444:4: error: implicit declaration of function 'put_task_struct' [-Werror,-Wimplicit-function-declaration] Fixes: 482f96324a4e ("drm/msm: Fix task dump in gpu recovery") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dsi: Move static keyword to the front of declarationsKrzysztof Wilczynski
Move the static keyword to the front of declarations of msm_dsi_v2_host_ops, msm_dsi_6g_host_ops and msm_dsi_6g_v2_host_ops, and resolve the following compiler warnings that can be seen when building with warnings enabled (W=1): drivers/gpu/drm/msm/dsi/dsi_cfg.c:150:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] drivers/gpu/drm/msm/dsi/dsi_cfg.c:161:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] drivers/gpu/drm/msm/dsi/dsi_cfg.c:172:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm: Remove unused function argumentsDrew Davenport
The arguments related to IOMMU port name have been unused since commit 944fc36c31ed ("drm/msm: use upstream iommu") and can be removed. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
dpu_kms.dev will never be NULL, so don't bother checking. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
msm_drm_private.kms will only be NULL in the dummy headless case, so there is no need to check it in the dpu display driver. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
drm_crtc.dev will never be NULL, so no need to check it. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
drm_device.dev_private is set to a non-NULL msm_drm_private struct in msm_drm_init. Successful initialization of msm means that dev_private is non-NULL so there is no need to check it everywhere. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unused macroDrew Davenport
Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unused variablesDrew Davenport
Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/gpu: add ocmem init/cleanup functionsBrian Masney
The files a3xx_gpu.c and a4xx_gpu.c have ifdefs for the OCMEM support that was missing upstream. Add two new functions (adreno_gpu_ocmem_init and adreno_gpu_ocmem_cleanup) that removes some duplicated code. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Tested-by: Gabriel Francisco <frc.gabrielgmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07soc: qcom: add OCMEM driverBrian Masney
The OCMEM driver handles allocation and configuration of the On Chip MEMory that is present on some Snapdragon SoCs. Devices which have OCMEM do not have GMEM inside the GPU core, so the GPU must instead use OCMEM to be functional. Since the GPU is currently the only OCMEM user with an upstream driver, this is just a minimal implementation sufficient for statically allocating to the GPU it's chunk of OCMEM. This driver currently does not read the gmu-sram node that is described in the device tree bindings. The starting memory address of the GPU's reserved memory region is hardcoded to zero to match what the hardware expects. The driver can be updated to read the reserved memory regions from device tree once other users of OCMEM are added upstream. Signed-off-by: Brian Masney <masneyb@onstation.org> Co-developed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Gabriel Francisco <frc.gabrielgmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07firmware: qcom: scm: add support to restore secure config to qcm_scm-32Rob Clark
Add support to restore the secure configuration for qcm_scm-32.c. This is needed by the On Chip MEMory (OCMEM) that is present on some Snapdragon devices. Signed-off-by: Rob Clark <robdclark@gmail.com> [masneyb@onstation.org: ported to latest kernel; set ctx_bank_num to spare parameter.] Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Gabriel Francisco <frc.gabrielgmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07firmware: qcom: scm: add OCMEM lock/unlock interfaceRob Clark
Add support for the OCMEM lock/unlock interface that is needed by the On Chip MEMory (OCMEM) that is present on some Snapdragon devices. Signed-off-by: Rob Clark <robdclark@gmail.com> [masneyb@onstation.org: ported to latest kernel; minor reformatting.] Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Gabriel Francisco <frc.gabrielgmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-05Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few fixes this time around: - Fixup of some clock specifications for DRA7 (device-tree fix) - Removal of some dead/legacy CPU OPP/PM code for OMAP that throws warnings at boot - A few more minor fixups for OMAPs, most around display - Enable STM32 QSPI as =y since their rootfs sometimes comes from there - Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool - Fix of thermal zone definition for ux500 (5.4 regression)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support ARM: dts: ux500: Fix up the CPU thermal zone arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y ARM: dts: am4372: Set memory bandwidth limit for DISPC ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage() ARM: OMAP2+: Add missing LCDC midlemode for am335x ARM: OMAP2+: Fix missing reset done flag for am3 and am43 ARM: dts: Fix gpio0 flags for am335x-icev2 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable DRM_TI_TFP410 DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again ARM: dts: Fix wrong clocks for dra7 mcasp clk: ti: dra7: Fix mcasp8 clock bits
2019-10-05Merge tag 'kbuild-fixes-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - remove unneeded ar-option and KBUILD_ARFLAGS - remove long-deprecated SUBDIRS - fix modpost to suppress false-positive warnings for UML builds - fix namespace.pl to handle relative paths to ${objtree}, ${srctree} - make setlocalversion work for /bin/sh - make header archive reproducible - fix some Makefiles and documents * tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kheaders: make headers archive reproducible kbuild: update compile-test header list for v5.4-rc2 kbuild: two minor updates for Documentation/kbuild/modules.rst scripts/setlocalversion: clear local variable to make it work for sh namespace: fix namespace.pl script to support relative paths video/logo: do not generate unneeded logo C files video/logo: remove unneeded *.o pattern from clean-files integrity: remove pointless subdir-$(CONFIG_...) integrity: remove unneeded, broken attempt to add -fshort-wchar modpost: fix static EXPORT_SYMBOL warnings for UML build kbuild: correct formatting of header in kbuild module docs kbuild: remove SUBDIRS support kbuild: remove ar-option and KBUILD_ARFLAGS
2019-10-05Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Twelve patches mostly small but obvious fixes or cosmetic but small updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix Nport ID display value scsi: qla2xxx: Fix N2N link up fail scsi: qla2xxx: Fix N2N link reset scsi: qla2xxx: Optimize NPIV tear down process scsi: qla2xxx: Fix stale mem access on driver unload scsi: qla2xxx: Fix unbound sleep in fcport delete path. scsi: qla2xxx: Silence fwdump template message scsi: hisi_sas: Make three functions static scsi: megaraid: disable device when probe failed after enabled device scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue scsi: qedf: Remove always false 'tmp_prio < 0' statement scsi: ufs: skip shutdown if hba is not powered scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF
2019-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold. 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric Dumazet. 3) txq null deref in mac80211, from Miaoqing Pan. 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann. 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso. 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean. 7) Various xgmac fixes in stmmac driver from Jose Abreu. 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from Michal Kubecek. 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij. 10) Fix sleep while atomic in sja1105, from Vladimir Oltean. 11) Suspend/resume deadlock in stmmac, from Thierry Reding. 12) Various UDP GSO fixes from Josh Hunt. 13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric Dumazet. 14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern. 15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) selftests/net: add nettest to .gitignore net: qlogic: Fix memory leak in ql_alloc_large_buffers nfc: fix memory leak in llcp_sock_bind() sch_dsmark: fix potential NULL deref in dsmark_init() net: phy: at803x: use operating parameters from PHY-specific status net: phy: extract pause mode net: phy: extract link partner advertisement reading net: phy: fix write to mii-ctrl1000 register ipv6: Handle missing host route in __ipv6_ifa_notify net: phy: allow for reset line to be tied to a sleepy GPIO controller net: ipv4: avoid mixed n_redirects and rate_tokens usage r8152: Set macpassthru in reset_resume callback cxgb4:Fix out-of-bounds MSI-X info array access Revert "ipv6: Handle race in addrconf_dad_work" net: make sock_prot_memory_pressure() return "const char *" rxrpc: Fix rxrpc_recvmsg tracepoint qmi_wwan: add support for Cinterion CLS8 devices tcp: fix slab-out-of-bounds in tcp_zerocopy_receive() lib: textsearch: fix escapes in example code udp: only do GSO if # of segs > 1 ...
2019-10-05Merge tag 's390-5.4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - defconfig updates - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i" constraint for function arguments. Two kvm changes acked-by Christian Borntraeger. - Fix -Wunused-but-set-variable warnings in mm code. - Avoid a constant misuse in qdio. - Handle a case when cpumf is temporarily unavailable. * tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: KVM: s390: mark __insn32_query() as __always_inline KVM: s390: fix __insn32_query() inline assembly s390: update defconfigs s390/pci: mark function(s) __always_inline s390/mm: mark function(s) __always_inline s390/jump_label: mark function(s) __always_inline s390/cpu_mf: mark function(s) __always_inline s390/atomic,bitops: mark function(s) __always_inline s390/mm: fix -Wunused-but-set-variable warnings s390: mark __cpacf_query() as __always_inline s390/qdio: clarify size of the QIB parm area s390/cpumf: Fix indentation in sampling device driver s390/cpumsf: Check for CPU Measurement sampling s390/cpumf: Use consistant debug print format
2019-10-05video/logo: do not generate unneeded logo C filesMasahiro Yamada
Currently, all the logo C files are generated irrespective of the CONFIG options. Adding them to extra-y is wrong. What we need to do here is to add them to 'targets' so that if_changed works properly. Files listed in 'targets' are cleaned, so clean-files is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-05video/logo: remove unneeded *.o pattern from clean-filesMasahiro Yamada
The pattern *.o is cleaned up globally by the top Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-04net: qlogic: Fix memory leak in ql_alloc_large_buffersNavid Emamdoost
In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb. This skb should be released if pci_dma_mapping_error fails. Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: at803x: use operating parameters from PHY-specific statusRussell King
Read the PHY-specific status register for the current operating mode (speed and duplex) of the PHY. This register reflects the actual mode that the PHY has resolved depending on either the advertisements of autoneg is enabled, or the forced mode if autoneg is disabled. This ensures that phylib's software state always tracks the hardware state. It seems both AR8033 (which uses the AR8031 ID) and AR8035 support this status register. AR8030 is not known at the present time. This patch depends on "net: phy: extract pause mode" and "net: phy: extract link partner advertisement reading". Reported-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: tinywrkb <tinywrkb@gmail.com> Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: extract pause modeRussell King
Extract the update of phylib's software pause mode state from genphy_read_status(), so that we can re-use this functionality with PHYs that have alternative ways to read the negotiation results. Tested-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: extract link partner advertisement readingRussell King
Move reading the link partner advertisement out of genphy_read_status() into its own separate function. This will allow re-use of this code by PHY drivers that are able to read the resolved status from the PHY. Tested-by: tinywrkb <tinywrkb@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: fix write to mii-ctrl1000 registerRussell King
When userspace writes to the MII_ADVERTISE register, we update phylib's advertising mask and trigger a renegotiation. However, writing to the MII_CTRL1000 register, which contains the gigabit advertisement, does neither. This can lead to phylib's copy of the advertisement becoming de-synced with the values in the PHY register set, which can result in incorrect negotiation resolution. Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: allow for reset line to be tied to a sleepy GPIO controllerAndrea Merello
mdio_device_reset() makes use of the atomic-pretending API flavor for handling the PHY reset GPIO line. I found no hint that mdio_device_reset() is called from atomic context and indeed it uses usleep_range() since long time, so I would assume that it is OK to sleep there. This patch switch to gpiod_set_value_cansleep() in mdio_device_reset(). This is relevant if e.g. the PHY reset line is tied to a I2C GPIO controller. This has been tested on a ZynqMP board running an upstream 4.19 kernel and then hand-ported on current kernel tree. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04r8152: Set macpassthru in reset_resume callbackKai-Heng Feng
r8152 may fail to establish network connection after resume from system suspend. If the USB port connects to r8152 lost its power during system suspend, the MAC address was written before is lost. The reason is that The MAC address doesn't get written again in its reset_resume callback. So let's set MAC address again in reset_resume callback. Also remove unnecessary lock as no other locking attempt will happen during reset_resume. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04cxgb4:Fix out-of-bounds MSI-X info array accessVishal Kulkarni
When fetching free MSI-X vectors for ULDs, check for the error code before accessing MSI-X info array. Otherwise, an out-of-bounds access is attempted, which results in kernel panic. Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04qmi_wwan: add support for Cinterion CLS8 devicesReinhard Speyerer
Add support for Cinterion CLS8 devices. Use QMI_QUIRK_SET_DTR as required for Qualcomm MDM9x07 chipsets. T: Bus=01 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 25 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b0 Rev= 3.18 S: Manufacturer=GEMALTO S: Product=USB Modem C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04Merge tag 'for-linus-5.4-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: - a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some cases, plus a follow-on cleanup series for that driver - a patch for introducing non-blocking EFI callbacks in Xen's EFI driver, plu a cleanup patch for Xen EFI handling merging the x86 and ARM arch specific initialization into the Xen EFI driver - a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning up after a user process has died - a fix for Xen on ARM after removal of ZONE_DMA - a cleanup patch for avoiding build warnings for Xen on ARM * tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: fix self-deadlock after killing user process xen/efi: have a common runtime setup function arm: xen: mm: use __GPF_DMA32 for arm64 xen/balloon: Clear PG_offline in balloon_retrieve() xen/balloon: Mark pages PG_offline in balloon_append() xen/balloon: Drop __balloon_append() xen/balloon: Set pages PageOffline() in balloon_add_region() ARM: xen: unexport HYPERVISOR_platform_op function xen/efi: Set nonblocking callbacks
2019-10-04Merge tag 'drm-fixes-2019-10-04' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Been offline for 3 days, got back and had some fixes queued up. Nothing too major, the i915 dp-mst fix is important, and amdgpu has a bulk move speedup fix and some regressions, but nothing too insane for an rc2 pull. The intel fixes are also 2 weeks worth, they missed the boat last week. core: - writeback fixes i915: - Fix DP-MST crtc_mask - Fix dsc dpp calculations - Fix g4x sprite scaling stride check with GTT remapping - Fix concurrence on cases where requests where getting retired at same time as resubmitted to HW - Fix gen9 display resolutions by setting the right max plane width - Fix GPU hang on preemption - Mark contents as dirty on a write fault. This was breaking cursor sprite with dumb buffers. komeda: - memory leak fix tilcdc: - include fix amdgpu: - Enable bulk moves - Power metrics fixes for Navi - Fix S4 regression - Add query for tcc disabled mask - Fix several leaks in error paths - randconfig fixes - clang fixes" * tag 'drm-fixes-2019-10-04' of git://anongit.freedesktop.org/drm/drm: (21 commits) Revert "drm/i915: Fix DP-MST crtc_mask" drm/omap: fix max fclk divider for omap36xx drm/i915: Fix g4x sprite scaling stride check with GTT remapping drm/i915/dp: Fix dsc bpp calculations, v5. drm/amd/display: fix dcn21 Makefile for clang drm/amd/display: hide an unused variable drm/amdgpu: display_mode_vba_21: remove uint typedef drm/amdgpu: hide another #warning drm/amdgpu: make pmu support optional, again drm/amd/display: memory leak drm/amdgpu: fix multiple memory leaks in acp_hw_init drm/amdgpu: return tcc_disabled_mask to userspace drm/amdgpu: don't increment vram lost if we are in hibernation Revert "drm/amdgpu: disable stutter mode for renoir" drm/amd/powerplay: add sensor lock support for smu drm/amd/powerplay: change metrics update period from 1ms to 100ms drm/amdgpu: revert "disable bulk moves for now" drm/tilcdc: include linux/pinctrl/consumer.h again drm/komeda: prevent memory leak in komeda_wb_connector_add drm: Clear the fence pointer when writeback job signaled ...
2019-10-04Merge tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Mandate timespec64 for the io_uring timeout ABI (Arnd) - Set of NVMe changes via Sagi: - controller removal race fix from Balbir - quirk additions from Gabriel and Jian-Hong - nvme-pci power state save fix from Mario - Add 64bit user commands (for 64bit registers) from Marta - nvme-rdma/nvme-tcp fixes from Max, Mark and Me - Minor cleanups and nits from James, Dan and John - Two s390 dasd fixes (Jan, Stefan) - Have loop change block size in DIO mode (Martijn) - paride pg header ifdef guard (Masahiro) - Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned devices and suboptimal performance on others (Ming) * tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits) block: sed-opal: fix sparse warning: convert __be64 data block: sed-opal: fix sparse warning: obsolete array init. block: pg: add header include guard Revert "s390/dasd: Add discard support for ESE volumes" s390/dasd: Fix error handling during online processing io_uring: use __kernel_timespec in timeout ABI loop: change queue block size to match when using DIO blk-mq: apply normal plugging for HDD blk-mq: honor IO scheduler for multiqueue devices nvme-rdma: fix possible use-after-free in connect timeout nvme: Move ctrl sqsize to generic space nvme: Add ctrl attributes for queue_count and sqsize nvme: allow 64-bit results in passthru commands nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T nvmet-tcp: remove superflous check on request sgl Added QUIRKs for ADATA XPG SX8200 Pro 512GB nvme-rdma: Fix max_hw_sectors calculation nvme: fix an error code in nvme_init_subsystem() nvme-pci: Save PCI state before putting drive into deepest state nvme-tcp: fix wrong stop condition in io_work ...
2019-10-04Merge tag 'drm-intel-fixes-2019-10-03-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix DP-MST crtc_mask - Fix dsc dpp calculations - Fix g4x sprite scaling stride check with GTT remapping Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191003193051.GA26421@intel.com
2019-10-04Merge tag 'drm-misc-fixes-2019-10-03' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - One include fix for tilcdc - A clock fix for OMAP - A memory leak fix for Komeda - Some fixes for resources cleanups with writeback Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191003081031.oykms5fg4tijvdri@gilmour
2019-10-03Revert "drm/i915: Fix DP-MST crtc_mask"Ville Syrjälä
This reverts commit 4eaceea3a00f8e936a7f48dcd0c975a57f88930f. Several userspace clients (modesetting ddx and mutter+wayland at least) handle encoder.possible_crtcs incorrectly. What they essentially do is the following: possible_crtcs = ~0; for_each_possible_encoder(connector) possible_crtcs &= encoder->possible_crtcs; Ie. they calculate the intersection of the possible_crtcs for the connector when they really should be calculating the union instead. In our case each MST encoder now has just one unique bit set, and so the intersection is always zero. The end result is that MST connectors can't be lit up because no crtc can be found to drive them. I've submitted a fix for the modesetting ddx [1], and complained on #wayland about mutter, so hopefully the situation will improve in the future. In the meantime we have regression, and so must go back to the old way of misconfiguring possible_crtcs in the kernel. [1] https://gitlab.freedesktop.org/xorg/xserver/merge_requests/277 Cc: Jonas Ådahl <jadahl@gmail.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111507 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903154018.26357-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit e838bfa8e170415fa3cc8e83ecb171e809c0c422) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-03Merge tag 'omap-for-v5.4/fixes-rc1-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.4-rc cycle Here are fixes for omaps to deal with few regressions, and to fix more boot time errors and warnings: - The recent ti-sysc interconnect target module driver changes had incorrect clock bits for both clocks and dts that cause warnings - For omap3-gta04, gpio changes caused the LCD to break a while back, and after discussing things the right fix is to set spi-cs-high - Recent omapdrm changes to use generic panels caused tfp410 to be disabled as we now must enable the generic support for it in defconfig - Recent omapdrm and backlight changes also finally made droid4 LCD to work, so let's enable it in the defconfig it can be used out of the box. This is not strictly a fix, but we still also have the older CONFIG_MFD_TI_LMU options available so this cuts down the confusion for trying to guess which display and which backlight is needed - Recent ti-sysc interconnect target module changes need the gpio module disabled on some boards, but this now needs to happen at the module level, not at the gpio driver level - Recent changes to probe system timers with ti-sysc caused warnings about mismatch in syconfig registers, so let's configure the option for RESET_STATUS as available in the TRMs - Recent changes to probe LCDC with ti-sysc caused warnings about mismatch in sysconfig registers, so let's configure the missing idlemodes for both platform data and dts as documented in TRMs - Since we moved mach-omap2 to probe with device tree, we've been getting voltage controller warnings. Turns out this code is no longer needed, so let's just remove omap2_set_init_voltage() to get rid of the pointless warnings - Configure am4372 dispc memory bandwidth to avoid underflow errors * tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Set memory bandwidth limit for DISPC ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage() ARM: OMAP2+: Add missing LCDC midlemode for am335x ARM: OMAP2+: Fix missing reset done flag for am3 and am43 ARM: dts: Fix gpio0 flags for am335x-icev2 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable DRM_TI_TFP410 DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again ARM: dts: Fix wrong clocks for dra7 mcasp clk: ti: dra7: Fix mcasp8 clock bits Link: https://lore.kernel.org/r/pull-1570040410-308159@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-03Merge drm-misc-next-fixes-2019-10-02 into drm-misc-fixesMaxime Ripard
One tilcdc fix was left out in drm-misc-next-fixes and didn't make it during the merge window. Let's bring it into drm-misc-fixes. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-03Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard
We haven't backmerged for a while, let's start the -rc period by pulling rc1. Signed-off-by: Maxime Ripard <mripard@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-22 06:40:52 +0000