net: phy: extract link partner advertisement reading

Move reading the link partner advertisement out of genphy_read_status()
into its own separate function.  This will allow re-use of this code by
PHY drivers that are able to read the resolved status from the PHY.

Tested-by: tinywrkb <tinywrkb@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 40 insertions, 25 deletions

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d347ddcac45b..9d2bbb13293e 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1783,32 +1783,9 @@ done:
 }
 EXPORT_SYMBOL(genphy_update_link);
 
-/**
- * genphy_read_status - check the link status and update current link state
- * @phydev: target phy_device struct
- *
- * Description: Check the link, then figure out the current state
- *   by comparing what we advertise with what the link partner
- *   advertises.  Start by checking the gigabit possibilities,
- *   then move on to 10/100.
- */
-int genphy_read_status(struct phy_device *phydev)
+int genphy_read_lpa(struct phy_device *phydev)
 {
-	int lpa, lpagb, err, old_link = phydev->link;
-
-	/* Update the link, but return if there was an error */
-	err = genphy_update_link(phydev);
-	if (err)
-		return err;
-
-	/* why bother the PHY if nothing can have changed */
-	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
-		return 0;
-
-	phydev->speed = SPEED_UNKNOWN;
-	phydev->duplex = DUPLEX_UNKNOWN;
-	phydev->pause = 0;
-	phydev->asym_pause = 0;
+	int lpa, lpagb;
 
 	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
 		if (phydev->is_gigabit_capable) {
@@ -1838,6 +1815,44 @@ int genphy_read_status(struct phy_device *phydev)
 			return lpa;
 
 		mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(genphy_read_lpa);
+
+/**
+ * genphy_read_status - check the link status and update current link state
+ * @phydev: target phy_device struct
+ *
+ * Description: Check the link, then figure out the current state
+ *   by comparing what we advertise with what the link partner
+ *   advertises.  Start by checking the gigabit possibilities,
+ *   then move on to 10/100.
+ */
+int genphy_read_status(struct phy_device *phydev)
+{
+	int err, old_link = phydev->link;
+
+	/* Update the link, but return if there was an error */
+	err = genphy_update_link(phydev);
+	if (err)
+		return err;
+
+	/* why bother the PHY if nothing can have changed */
+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+		return 0;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	err = genphy_read_lpa(phydev);
+	if (err < 0)
+		return err;
+
+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
 		phy_resolve_aneg_linkmode(phydev);
 	} else if (phydev->autoneg == AUTONEG_DISABLE) {
 		int bmcr = phy_read(phydev, MII_BMCR);