summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Expand)Author
2018-07-29Merge tag 'linux-can-next-for-4.19-20180727' of ssh://gitolite.kernel.org/pub...David S. Miller
2018-07-29qed: remove redundant functions qed_set_gft_event_id_cm_hdrYueHaibing
2018-07-29liquidio: remove redundant function cn23xx_dump_vf_iq_regsYueHaibing
2018-07-28net: mvneta: Improve the buffer allocation method for SWBMYelena Krivosheev
2018-07-28net: mvneta: Verify hardware checksum only when offload checksum feature is setYelena Krivosheev
2018-07-28net: mvneta: Allocate page for the descriptorGregory CLEMENT
2018-07-28net: mvneta: discriminate error cause for missed packetGregory CLEMENT
2018-07-28net: mvneta: increase number of buffers in RX and TX queueYelena Krivosheev
2018-07-28net: mvneta: remove data pointer usage from device_node structureGregory CLEMENT
2018-07-28net: mvneta: fix mtu change on port without linkYelena Krivosheev
2018-07-28net: ethernet: mvneta: Fix napi structure mixup on armada 3700Andrew Lunn
2018-07-27net: usb: sr9700: Replace mdelay() with msleep() in sr9700_bind()Jia-Ju Bai
2018-07-27net: usb: pegasus: Replace mdelay() with msleep() in setup_pegasus_II()Jia-Ju Bai
2018-07-27net: phy: marvell: Replace mdelay() with msleep() in m88e1116r_config_init()Jia-Ju Bai
2018-07-27net: nvidia: forcedeth: Replace GFP_ATOMIC with GFP_KERNEL in nv_probe()Jia-Ju Bai
2018-07-27net: jme: Replace mdelay() with msleep() and usleep_range() in jme_wait_link()Jia-Ju Bai
2018-07-27net: hisilicon: hns: Replace mdelay() with msleep()Jia-Ju Bai
2018-07-27net: amd: pcnet32: Replace GFP_ATOMIC with GFP_KERNEL in pcnet32_alloc_ring()Jia-Ju Bai
2018-07-27cxgb4: print ULD queue information managed by LLDRahul Lakkireddy
2018-07-27mlxsw: spectrum: Support ieee_setapp, ieee_delappPetr Machata
2018-07-27mlxsw: reg: Add QoS Priority to DSCP Mapping RegisterPetr Machata
2018-07-27mlxsw: reg: Add QoS ReWrite Enable RegisterPetr Machata
2018-07-27mlxsw: reg: Add QoS Priority Trust State RegisterPetr Machata
2018-07-27mlxsw: reg: Add QoS Port DSCP to Priority Mapping RegisterPetr Machata
2018-07-27can: kvaser_usb: Simplify struct kvaser_cmd_cardinfoJimmy Assarsson
2018-07-27can: kvaser_usb: Add support for Kvaser USB hydra familyJimmy Assarsson
2018-07-27can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.cJimmy Assarsson
2018-07-27can: kvaser_usb: Add SPDX GPL-2.0 license identifierJimmy Assarsson
2018-07-27can: kvaser_usb: Fix typosJimmy Assarsson
2018-07-27can: kvaser_usb: Improve logging messagesJimmy Assarsson
2018-07-27can: kvaser_usb: Refactor kvaser_usb_init_one()Jimmy Assarsson
2018-07-27can: kvaser_usb: Refactor kvaser_usb_get_endpoints()Jimmy Assarsson
2018-07-27can: kvaser_usb: Add pointer to struct usb_interface into struct kvaser_usbJimmy Assarsson
2018-07-27can: kvaser_usb: Replace USB timeout constants with one defineJimmy Assarsson
2018-07-27can: kvaser_usb: Rename message/msg to command/cmdJimmy Assarsson
2018-07-27can: kvaser_usb: Remove unused commands and definesJimmy Assarsson
2018-07-27can: kvaser_usb: Remove unnecessary returnJimmy Assarsson
2018-07-27can: peak_canfd: rearrange the way resources are releasedStephane Grosjean
2018-07-27can: peak_canfd: fix typo in error messageStephane Grosjean
2018-07-27can: peak_canfd: use ndev irq instead of pci_dev oneStephane Grosjean
2018-07-27can: peak_canfd: remove useless defined symbolsStephane Grosjean
2018-07-27can: peak_canfd: improves 32-bit alignmentStephane Grosjean
2018-07-27can: peak_usb: mark expected switch fall-throughsGustavo A. R. Silva
2018-07-27can: xilinx_can: add support for Xilinx CAN FD coreAnssi Hannula
2018-07-27can: xilinx_can: refactor code in preparation for CAN FD supportAnssi Hannula
2018-07-27can: xilinx_can: update stats.tx_bytes after transmissionAnssi Hannula
2018-07-27can: xilinx_can: use can_change_state()Anssi Hannula
2018-07-27can: xilinx_can: only report warning and passive states on state changesAnssi Hannula
2018-07-27can: sja1000: Replace mdelay with usleep_range in pcan_add_channelsJia-Ju Bai
2018-07-27can: sja1000: Replace mdelay with usleep_range in peak_pci_probeJia-Ju Bai
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 16:29:55 +0000