summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc2
AgeCommit message (Collapse)Author
2015-02-04Merge tag 'usb-for-v3.20' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.20 merge window Here's the big pull request for Gadgets and PHYs. It's a total of 217 non-merge commits with pretty much everything being touched. The most important bits are a ton of new documentation for almost all usb gadget functions, a new isp1760 UDC driver, several improvements to the old net2280 UDC driver, and some minor tracepoint improvements to dwc3. Other than that, a big list of minor cleanups, smaller bugfixes and new features all over the place. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-04usb: dwc2: Fix a bug in reading the endpoint directions from reg.Roshan Pius
According to the DWC2 datasheet, the HWCFG1 register stores the configured endpoint directions for endpoints 0-15 in bit positions 0-31. ========================== Endpoint Direction (EpDir) This 32-bit field uses two bits per endpoint to determine the endpoint direction. Endpoint Bits [31:30]: Endpoint 15 direction Bits [29:28]: Endpoint 14 direction .... Bits [3:2]: Endpoint 1 direction Bits[1:0]: Endpoint 0 direction (always BIDIR) ========================== The DWC2 driver is currently interpreting the contents of the register as directions for endpoints 1-15 which leads to an error in determining the configured endpoint directions in the core because the first 2 bits determine the direction of endpoint 0 and not 1. This is based on testing/next branch in Felipe's git. Signed-off-by: Roshan Pius <rpius@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-02Merge 3.19-rc7 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here to make merges easier. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-30usb: dwc2: fix USB core dependenciesArnd Bergmann
It is currently possible to configure the dwc2 driver as built-in when host mode or dual-role is enabled, but the USB core is a loadable module. This leads to a link failure: drivers/built-in.o: In function `_dwc2_hcd_start': :(.text+0x84538): undefined reference to `usb_hcd_resume_root_hub' drivers/built-in.o: In function `_dwc2_hcd_urb_dequeue': :(.text+0x84aa0): undefined reference to `usb_hcd_check_unlink_urb' :(.text+0x84e4c): undefined reference to `usb_hcd_unlink_urb_from_ep' :(.text+0x84e74): undefined reference to `usb_hcd_giveback_urb' drivers/built-in.o: In function `dwc2_assign_and_init_hc': :(.text+0x86b98): undefined reference to `usb_hcd_unmap_urb_for_dma' drivers/built-in.o: In function `_dwc2_hcd_urb_enqueue': :(.text+0x8717c): undefined reference to `usb_hcd_link_urb_to_ep' :(.text+0x872f4): undefined reference to `usb_hcd_unlink_urb_from_ep' drivers/built-in.o: In function `dwc2_host_complete': :(.text+0x875d4): undefined reference to `usb_hcd_unlink_urb_from_ep' :(.text+0x87600): undefined reference to `usb_hcd_giveback_urb' drivers/built-in.o: In function `dwc2_hcd_init': :(.text+0x87ba8): undefined reference to `usb_disabled' :(.text+0x87d38): undefined reference to `usb_create_hcd' :(.text+0x88094): undefined reference to `usb_add_hcd' :(.text+0x880dc): undefined reference to `usb_put_hcd' drivers/built-in.o: In function `dwc2_hcd_remove': :(.text+0x8821c): undefined reference to `usb_remove_hcd' :(.text+0x8823c): undefined reference to `usb_put_hcd' drivers/built-in.o: In function `dwc2_hc_handle_tt_clear.isra.10': :(.text+0x88e2c): undefined reference to `usb_hub_clear_tt_buffer' drivers/built-in.o: In function `dwc2_hcd_qtd_add': :(.text+0x8b554): undefined reference to `usb_calc_bus_time' To fix the problem, this patch changes the dependencies so that dwc2 host mode can only be enabled if either the USB core is built-in or both USB and dwc2 are modules. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: initialize controller in pullup callbackGregory Herrero
USB reset interrupt is no more used to reset the controller. Thus, reset the controller in pullup callback as described by Synopsys programming guide. Otherwise enumeration sometimes fails when usb configuration is switched without physical disconnection. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: replace constants with definesMian Yousaf Kaukab
Defines are more readable and searchable than constants. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: fix phy interface configurationMian Yousaf Kaukab
hsotg->phyif is set in dwc2_gadget_init according to phy interface width. Use it for configuration instead of hardcoded value. Moreover, set USB turnaround time according to phy width. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: fix debug message for zlpMian Yousaf Kaukab
Print debug message according to zlp direction. Always saying "Sending" is misleading. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: don't modify pullup status during resetGregory Herrero
Pullup doesn't need to be enabled during usb reset since it is already enabled. This leads to shorter chirp-k duration if done during usb reset. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: add reset flag in init functionGregory Herrero
Add a flag to request physical reset of the controller when s3c_hsotg_core_init_disconnected is called. During the usb reset, controller must not be fully reconfigured and resetted. Else this leads to shorter chirp-k duration during enumeration. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: add unaligned buffers supportMian Yousaf Kaukab
When using DMA, dwc2 requires buffers to be 4 bytes aligned. Use bounce buffers if they are not. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: remove hardcoded if (0) and if (1) checksMian Yousaf Kaukab
Remove dead code as well. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: fix a typo in commentGregory Herrero
s3c_hsotg_process_req_feature comments was not correct Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: add TEST_MODE feature supportGregory Herrero
Handle SET_FEATURE TEST_MODE request sent by the host. Slightly rework FEATURE request handling to allow parsing other request types than Endpoint. Also add a debugfs to change test mode value from user space. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: gadget: fix clear halt feature handlingGregory Herrero
When clearing HALT on an endpoint, req->complete of in progress requests must be called with locks off. New request should only be started if there is not already a pending request on the endpoint. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: dwc2: host: resume root hub on remote wakeupGregory Herrero
When a remote wakeup happens during bus_suspend, hcd needs to resume its root hub. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-25dwc2: hcd: use HUB_CHAR_*Sergei Shtylyov
Fix using the bare number to set the 'wHubCharacteristics' field of the Hub Descriptor while the values are #define'd in <linux/usb/ch11.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-19usb: dwc2: hcd: use HUB_CHAR_*Sergei Shtylyov
Fix using the bare number to set the 'wHubCharacteristics' field of the Hub Descriptor while the values are #define'd in <linux/usb/ch11.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-19Revert "usb: dwc2: add bus suspend/resume for dwc2"Paul Zimmerman
This reverts commit 0cf884e819e05437287a668b9bfcc198bab6329c. Even after applying the follow-on patch at https://patchwork.kernel.org/patch/5325111 there are still problems with device connect on the Altera SOCFPGA platform at least. One possible fix would be to add a whitelist to enable suspend/resume on platforms where it does work correctly. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-19Merge tag 'v3.19-rc5' into nextFelipe Balbi
Linux 3.19-rc5 Conflicts: drivers/usb/dwc2/gadget.c drivers/usb/gadget/udc/bdc/bdc_ep.c
2015-01-19usb: dwc2: call dwc2_is_controller_alive() under spinlockRobert Baldyga
This patch fixes the following problem: data transmission in direction IN break unless the GSNPSID register access is done with spinlock held. This issue occurs at least in Exynos4412 SoC, probably in many SoC's from Exynos familly. The problem is described here: https://lkml.org/lkml/2014/12/22/185 And there is linux mailing list discussion: https://lkml.org/lkml/2015/1/14/17 Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: report disconnection after resetMian Yousaf Kaukab
If usb bus is reset without a physical disconnection, all endpoints will remain open. Call s3c_hsotg_disconnect() from reset handler to report a disconnect to gadget framework. hsotg->connected is checked in s3c_hsotg_disconnect() before processing disconnect. In some cases, USBRst is seen before EnumDone and after it as well. So move setting of hsotg->connected to set-address to avoid reporting extra disconnection in this case. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: force gadget initialization in dev modeGregory Herrero
When booting with id pin grounded, dwc2 default to host mode. Thus, force device mode prior initializing gadget part. Else fifo init will fail since fifo values are not correct in host mode. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: add vbus_draw supportGregory Herrero
This callback informs the driver about the total amount of current it is allowed to draw. Share this information with the phy so that current limits can be set for charging for example. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: fix pullup handlingGregory Herrero
Gadget must be informed about disconnection when pullup is removed. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: reset fifo_map when initializing fifosGregory Herrero
After all endpoints are disabled, fifo_map should have reached 0. Its a bug if if didn't, so warn about it and reset it to 0 so that driver can continue using all the fifos. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: fix fifo allocation leakMian Yousaf Kaukab
When selecting different alt setting, s3c_hsotg_ep_enable can be called with fifo already allocated. Allocate fifo again only if required and after deallocating the previous fifo. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: pick smallest acceptable fifoMian Yousaf Kaukab
Current algorithm picks the first fifo which is equal to or greater than the required size. This can result in bigger fifos assigned to endpoints with smaller maxps. Change the algorithm to pick the smallest fifo which is greater than or equal to the required size. Moreover, only use signed variables when required. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: rename sent_zlp to send_zlpMian Yousaf Kaukab
This flag is set before sending the zlp. So use present tense instead of the past tense. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: add vbus_session supportGregory Herrero
Enable phy driver to report vbus session. This allows us to remove D+ pullup when vbus is not present. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: don't block after fifo flush timeoutGregory Herrero
Can't stay in the loop forever. Break it after timeout. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: dont warn if endpoint is not enabledMian Yousaf Kaukab
The warning is probably good but it has false positives in both dma and non-dma cases. So its not very helpful in either. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: fix zero length packet transfersMian Yousaf Kaukab
According to programming guide, zero length packet should be programmed on its own and should not be counted in DIEPTSIZ.PktCnt with other packets. For ep0, this is the zlp for DATA IN stage (if required) and not for the STATUS stage. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: manage ep0 state in softwareMian Yousaf Kaukab
Manage ep0 state in software to add handling of status OUT stage. Just toggling hsotg->setup in s3c_hsotg_handle_outdone leaves it in wrong state in 2-stage control transfers. Moreover, ensure that for setup-packet s3c_hsotg_handle_outdone is called either from SetupDone or OutDone but not both. Dwc2 ip v3.00a generates both SetupDone and OutDone on setup packets. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: kill requests after disabling epMian Yousaf Kaukab
kill_all_requests() can flush the fifo. Call it after disabling the endpoint. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: consider all tx fifosMian Yousaf Kaukab
When matching tx fifo to endpoint, consider all fifos instead of hard limiting to 8 Moreover, print error in case no fifo could be found. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: fix debug loop limitsMian Yousaf Kaukab
< 15 check doesn't show debug information for endpoint 15. It is possible to have less than 15 endpoints so use limit provided by hardware configuration. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: remove unused members from hsotg_reqMian Yousaf Kaukab
These members are only occupying space. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: configure fifos from device treeGregory Herrero
As fifo size can vary between SOCs, add possibility to configure them from device tree. Fifo sizes used by the legacy driver will be used If they are not provided by the device tree. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Reviewed-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: check interrupts for all endpointsMian Yousaf Kaukab
Current code does not check endpoint 15 interrupt. Use number of endpoint configured in hardware instead of the hardcoded value. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: add bi-directional endpoint supportMian Yousaf Kaukab
GHWCFG1 provides hardware configuration of each endpoint. Use it to configure the endpoints instead of assuming all even endpoint are OUT and all odd endpoints are IN. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: add device tree property to enable dmaGregory Herrero
* Add an of specific function to parse device node properties. * Enable dma usage only if device tree property 'g_use_dma' is present. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: don't erase gahbcfg register when enabling dmaGregory Herrero
Do a read-modify-write instead of only setting DMAEn bit. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: write correct value in ahbcfg registerGregory Herrero
HBstLen is GAHBCFG[4:1]. Use GAHBCFG_HBSTLEN_SHIFT to write burst- length at correct position. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: fix error path in dwc2_gadget_initMian Yousaf Kaukab
In the error path, s3c_hsotg_phy_disable should be called after a call to s3c_hsotg_phy_enable is made. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: don't embed ep0 buffersMian Yousaf Kaukab
When using DMA, data of the previous setup packet can be read back from cache because ep0 and ctrl buffers are embedded in struct s3c_hsotg. Allocate buffers instead of embedding them. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Reviewed-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: don't process XferCompl on setup packetMian Yousaf Kaukab
Only process DOEPINT.XferCompl on data packet as DOEPINTn.SetUp can occur with or without DOEPINT.XferCompl. When DOEPINT.SetUp occurs with DOEPINT.XferCompl, only DOEPINT.SetUp needs to be handled. Moreover, ignore DOEPINT.XferCompl when it occurs with DOEPINT.StupPktRcvd as driver needs to wait for DOEPINT.SetUp to continue. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: mask fifo empty irq with dmaMian Yousaf Kaukab
When using DMA, keep fifo empty interrupt disabled. Otherwise core is flooded by interrupts. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: register gadget handle to the phyGregory Herrero
Bind peripheral controller to the phy on udc_start. Unbind on udc_stop. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12drivers: usb: dwc2: remove 'force' parameter from kill_all_requests()Robert Baldyga
This patch fixes in simpler way the bug described in [1] and [2]. It looks like DWC2 is the only UDC driver that doesn't force usb requests to complete in ep_disable() function. This causes described problem, because we have no guarantee that all requests will be completed before unbind of usb function. To fix this problem we force all requests of disabled endpoint to complete. Also currently running request is not handled. This allowed to simplify code of kill_all_requests() function, because 'force' parameter is always set to true, so we don't need it anymore. In s3c_hsotg_rx_data() we change function used to print message when active request is NULL from dev_warn() to dev_dbg(), because such situation is harmless for driver and now it can take place during normal endpoint disabling. [1] https://lkml.org/lkml/2014/12/9/283 [2] https://lkml.org/lkml/2014/12/12/360 Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 09:14:05 +0000