summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Collapse)Author
2019-10-158250-men-mcb: fix error checking when get_num_ports returns -ENODEVColin Ian King
The current checking for failure on the number of ports fails when -ENODEV is returned from the call to get_num_ports. Fix this by making num_ports and loop counter i signed rather than unsigned ints. Also add check for num_ports being less than zero to check for -ve error returns. Addresses-Coverity: ("Unsigned compared against 0") Fixes: e2fea54e4592 ("8250-men-mcb: add support for 16z025 and 16z057") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Michael Moese <mmoese@suse.de> Link: https://lore.kernel.org/r/20191013220016.9369-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10tty: serial: imx: Use platform_get_irq_optional() for optional IRQsAnson Huang
All i.MX SoCs except i.MX1 have ONLY one necessary IRQ, use platform_get_irq_optional() to get second/third IRQ which are optional to avoid below error message during probe: [ 0.726219] imx-uart 30860000.serial: IRQ index 1 not found [ 0.731329] imx-uart 30860000.serial: IRQ index 2 not found Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1570614559-11900-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10serial: fix kernel-doc warning in commentsRandy Dunlap
Fix Sphinx warning in serial_core.c: ../drivers/tty/serial/serial_core.c:1969: WARNING: Definition list ends without a blank line; unexpected unindent. Fixes: 73abaf87f01b ("serial: earlycon: Refactor parse_options into serial core") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/e989641c-224a-1090-e596-e7cc800bed44@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07serial: 8250_omap: Fix gpio check for auto RTS/CTSAdam Ford
There are two checks to see if the manual gpio is configured, but these the check is seeing if the structure is NULL instead it should check to see if there are CTS and/or RTS pins defined. This patch uses checks for those individual pins instead of checking for the structure itself to restore auto RTS/CTS. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20191006163314.23191-2-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07serial: mctrl_gpio: Check for NULL pointerAdam Ford
When using mctrl_gpio_to_gpiod, it dereferences gpios into a single requested GPIO. This dereferencing can break if gpios is NULL, so this patch adds a NULL check before dereferencing it. If gpios is NULL, this function will also return NULL. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20191006163314.23191-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07tty: serial: fsl_lpuart: Fix lpuart_flush_buffer()Andrey Smirnov
Fix incorrect read-modify-write sequence in lpuart_flush_buffer() that was reading from UARTPFIFO and writing to UARTCFIFO instead of operating solely on the latter. Fixes: 9bc19af9dacb ("tty: serial: fsl_lpuart: Flush HW FIFOs in .flush_buffer") Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reported-by: Vivien Didelot <vivien.didelot@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Chris Healy <cphealy@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Jiri Slaby <jslaby@suse.com> Link: https://lore.kernel.org/r/20191004215537.5308-1-andrew.smirnov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: uartps: Fix uartps_major handlingMichal Simek
There are two parts which should be fixed. The first one is to assigned uartps_major at the end of probe() to avoid complicated logic when something fails. The second part is initialized uartps_major number to 0 when last device is removed. This will ensure that on next probe driver will ask for new dynamic major number. Fixes: ab262666018d ("serial: uartps: Use the same dynamic major number for all ports") Reported-by: Paul Thomas <pthomas8589@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d2652cda992833315c4f96f06953eb547f928918.1570194248.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: uartlite: fix exit path null pointerRandy Dunlap
Call uart_unregister_driver() conditionally instead of unconditionally, only if it has been previously registered. This uses driver.state, just as the sh-sci.c driver does. Fixes this null pointer dereference in tty_unregister_driver(), since the 'driver' argument is null: general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:tty_unregister_driver+0x25/0x1d0 Fixes: 238b8721a554 ("[PATCH] serial uartlite driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org> Cc: Peter Korsgaard <jacmet@sunsite.dk> Link: https://lore.kernel.org/r/9c8e6581-6fcc-a595-0897-4d90f5d710df@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: serial: linflexuart: Fix magic SysRq handlingStefan-gabriel Mirea
Following an incorrect indentation reported to me by Dan Carpenter, I noticed that the SysRq lines were inherited from the lpuart driver[1] (note how the 'continue' is aligned to 'sport->port.sysrq = 0') and we have never actually tested the SysRq support. 'sport->sysrq = 0' is not necessary neither before nor after 'continue', because sysrq will already be 0 after uart_handle_sysrq_char() will finish. Also, since the LINFlexD driver never called uart_handle_break(), sysrq would have never been set to a nonzero value, so uart_handle_sysrq_char() was not going to do anything. Break conditions are detected based on a null data byte along with a framing error (stop bit sampled to 0). [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/serial/fsl_lpuart.c?h=b3e3bf2ef2c74f5ce5c19510edbbb9bfc1d249c2#n659 Fixes: 09864c1cdf5c ("tty: serial: Add linflexuart driver for S32V234") Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190918184439.7465-1-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: sh-sci: Use platform_get_irq_optional() for optional interruptsGeert Uytterhoeven
As platform_get_irq() now prints an error when the interrupt does not exist, scary warnings may be printed for optional interrupts: sh-sci e6550000.serial: IRQ index 1 not found sh-sci e6550000.serial: IRQ index 2 not found sh-sci e6550000.serial: IRQ index 3 not found sh-sci e6550000.serial: IRQ index 4 not found sh-sci e6550000.serial: IRQ index 5 not found Fix this by calling platform_get_irq_optional() instead for all but the first interrupts, which are optional. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191001180743.1041-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial/sifive: select SERIAL_EARLYCONChristoph Hellwig
The sifive serial driver implements earlycon support, but unless another driver is built in that supports earlycon support it won't be usable. Explicitly select SERIAL_EARLYCON instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Link: https://lore.kernel.org/r/20190910055923.28384-1-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()'Christophe JAILLET
'exit' functions should be marked as __exit, not __init. Fixes: c10b13325ced ("tty: serial: Add RDA8810PL UART driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190910041702.7357-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'Christophe JAILLET
'exit' functions should be marked as __exit, not __init. Fixes: fc60a8b675bd ("tty: serial: owl: Implement console driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190910041129.6978-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-28Merge branch 'next-lockdown' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-09-18Merge tag 'tty-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Even in this age, people are still making new serial port silicon, why... Anyway, here's the TTY and Serial driver update for 5.4-rc1. Lots of changes in here for a number of embedded serial port devices that are being worked on because people really like to see those console logs... Other than that, nothing major here, no core tty changes that anyone should care about. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (125 commits) serial: tegra: Add PIO mode support serial: tegra: report clk rate errors serial: tegra: add support to adjust baud rate serial: tegra: DT for Adjusted baud rates serial: tegra: add support to use 8 bytes trigger serial: tegra: set maximum num of uart ports to 8 serial: tegra: check for FIFO mode enabled status dt-binding: serial: tegra: add new chips serial: tegra: report error to upper tty layer serial: tegra: flush the RX fifo on frame error serial: tegra: avoid reg access when clk disabled serial: tegra: add support to ignore read serial: sprd: correct the wrong sequence of arguments dt-bindings: serial: Convert riscv,sifive-serial to json-schema serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control serial: max310x: Properly set flags in AutoCTS mode tty: serial: fix platform_no_drv_owner.cocci warnings dt-bindings: serial: Document Freescale LINFlexD UART serial: fsl_linflexuart: Update compatible string tty: n_gsm: avoid recursive locking with async port hangup ...
2019-09-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...
2019-09-16Merge tag 'please-pull-ia64_for_5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 updates from Tony Luck: "The big change here is removal of support for SGI Altix" * tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits) genirq: remove the is_affinity_mask_valid hook ia64: remove CONFIG_SWIOTLB ifdefs ia64: remove support for machvecs ia64: move the screen_info setup to common code ia64: move the ROOT_DEV setup to common code ia64: rework iommu probing ia64: remove the unused sn_coherency_id symbol ia64: remove the SGI UV simulator support ia64: remove the zx1 swiotlb machvec ia64: remove CONFIG_ACPI ifdefs ia64: remove CONFIG_PCI ifdefs ia64: remove the hpsim platform ia64: remove now unused machvec indirections ia64: remove support for the SGI SN2 platform drivers: remove the SGI SN2 IOC4 base support drivers: remove the SGI SN2 IOC3 base support qla2xxx: remove SGI SN2 support qla1280: remove SGI SN2 support misc/sgi-xp: remove SGI SN2 support char/mspec: remove SGI SN2 support ...
2019-09-05serial: tegra: Add PIO mode supportKrishna Yarlagadda
Add PIO mode support in receive and transmit path with RX interrupt trigger of 16 bytes for Tegra194 and older chips. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-13-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: report clk rate errorsKrishna Yarlagadda
Standard UART controllers support +/-4% baud rate error tolerance. Tegra186 only supports 0% to +4% error tolerance whereas other Tegra chips support standard +/-4% rate. Add chip data for knowing error tolerance level for each soc. Creating new compatible for Tegra194 chip as it supports baud rate error tolerance of -2 to +2%, different from older chips. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-12-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: add support to adjust baud rateKrishna Yarlagadda
Add support to adjust baud rates to fall under supported tolerance range through DT. Tegra186 chip has a hardware issue resulting in frame errors when tolerance level for baud rate is negative. Provided entries to adjust baud rate to be within acceptable range and work with devices that can send negative baud rate. Also report error when baud rate set is out of tolerance range of controller updated in device tree. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-11-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: add support to use 8 bytes triggerKrishna Yarlagadda
Add support to use 8 bytes trigger for Tegra186 SOC. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-9-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: set maximum num of uart ports to 8Krishna Yarlagadda
Set maximum number of UART ports to 8 as older chips have 5 ports and Tergra186 and later chips will have 8 ports. Add this info to chip data. Read device tree compatible of this driver and register uart driver with max ports of matching chip data. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-8-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: check for FIFO mode enabled statusKrishna Yarlagadda
Chips prior to Tegra186 needed delay of 3 UART clock cycles to avoid data loss. This issue is fixed in Tegra186 and a new flag is added to check if FIFO mode is enabled. chip data updated to check if this flag is available for a chip. Tegra186 has new compatible to enable this flag. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-7-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: report error to upper tty layerKrishna Yarlagadda
Report overrun/parity/frame/break errors to top tty layer. Add support to ignore break character if IGNBRK is set. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-5-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: flush the RX fifo on frame errorShardar Shariff Md
FIFO reset/flush code implemented now does not follow programming guidelines. RTS line has to be turned off while flushing FIFOs to avoid new transfers. Also check LSR bits UART_LSR_TEMT and UART_LSR_DR to confirm FIFOs are flushed. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-4-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: avoid reg access when clk disabledAhung Cheng
This avoids two race conditions from the UART shutdown sequence both leading to 'Machine check error in AXI2APB' and kernel oops. One was that the clock was disabled before the DMA was terminated making it possible for the DMA callbacks to be called after the clock was disabled. These callbacks could write to the UART registers causing timeout. The second was that the clock was disabled before the UART was completely flagged as closed. This is done after the shutdown is called and a new write could be started after the clock was disabled. tegra_uart_start_pio_tx could be called causing timeout. Given that the baud rate is reset at the end of shutdown sequence, this fix is to examine the baud rate to avoid register access from both race conditions. Besides, terminate the DMA before disabling the clock. Signed-off-by: Ahung Cheng <ahcheng@nvidia.com> Signed-off-by: Shardar Mohammed <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-3-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: add support to ignore readShardar Shariff Md
Add support to ignore read characters if CREAD flag is not set. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-2-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: sprd: correct the wrong sequence of argumentsChunyan Zhang
The sequence of arguments which was passed to handle_lsr_errors() didn't match the parameters defined in that function, &lsr was passed to flag and &flag was passed to lsr, this patch fixed that. Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190905074151.5268-1-zhang.lyra@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: max310x: turn off transmitter before activating AutoCTS or auto ↵Christoph Vogtländer
transmitter flow control As documented in the data-sheet, the transmitter must be disabled before activating AutoCTS or auto transmitter flow control. Accordingly, the transmitter must be enabled after AutoCTS or auto transmitter flow control gets deactivated. Signed-off-by: Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com> Link: https://lore.kernel.org/r/20190904121746.4641-1-c.vogtlaender@sigma-surface-science.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: max310x: Properly set flags in AutoCTS modeChristoph Vogtländer
Commit 391f93f2ec9f ("serial: core: Rework hw-assisted flow control support") has changed the way the AutoCTS mode is handled. According to that change, serial drivers which enable H/W AutoCTS mode must set UPSTAT_AUTORTS, UPSTAT_AUTOCTS and UPSTAT_AUTOXOFF to prevent the serial core from inadvertently disabling RX or TX. This patch adds proper handling of UPSTAT_AUTORTS, UPSTAT_AUTOCTS and UPSTAT_AUTOXOFF flags. Signed-off-by: Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com> Link: https://lore.kernel.org/r/20190904121141.4570-1-c.vogtlaender@sigma-surface-science.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: serial: fix platform_no_drv_owner.cocci warningskbuild test robot
drivers/tty/serial/fsl_linflexuart.c:907:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Fixes: b953815b819b ("tty: serial: Add linflexuart driver for S32V234") CC: Stefan-gabriel Mirea <stefan-gabriel.mirea@nxp.com> Signed-off-by: kbuild test robot <lkp@intel.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20190825142837.zt3hpa22c7iofg3v@48261080c7f1 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: fsl_linflexuart: Update compatible stringStefan-gabriel Mirea
The "fsl,s32-linflexuart" compatible string is too generic. Make it SoC specific. Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Link: https://lore.kernel.org/r/20190823191115.18490-4-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: sprd: keep console alive even if missing the 'enable' clockChunyan Zhang
The sprd serial console can work with only 26M fixed clock, but the probe() is returning fail if the clock "enable" is not configured in device tree. This patch will fix the problem to let the uart device which is used for console can be initialized even missing "enable" clock configured in devicetree. We should make sure the debug function as available as we can. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/20190826072929.7696-4-zhang.lyra@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: sprd: add console_initcall in sprd's uart driverChunyan Zhang
Use console_initcall to save the console index we selected on the command line to sprd_console before probe finished. Thus we can make different processes to the uart devices during initialization according to whether it is used for console. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/20190826072929.7696-3-zhang.lyra@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: sprd: check the right port and membaseChunyan Zhang
When calling sprd_console_setup(), sprd_uart_port probably is NULL, we should check that first instead of checking its items directly. Also we should check membase to avoid accessing uart device before its initialization finished. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/20190826072929.7696-2-zhang.lyra@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty/serial: atmel: remove unneeded atmel_get_lines_status functionRichard Genoud
Since commit 18dfef9c7f87 ("serial: atmel: convert to irq handling provided mctrl-gpio"), the GPIOs interrupts are handled by mctrl_gpio_irq_handle(). So, atmel_get_lines_status() can be completely killed and replaced by : atmel_uart_readl(port, ATMEL_US_CSR); Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/20190826071752.30396-1-richard.genoud@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: imx: use Tx ready rather than Tx empty irqSergey Organov
This should help to avoid unnecessary gaps in transmission while adding little overhead due to low default Tx threshold level (2 bytes). Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1567017475-11919-6-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: imx: fix data breakage on termios changeSergey Organov
imx_set_termios(): avoid writing baud rate divider registers when the values to be written are the same as current. Any writing seems to restart transmission/receiving logic in the hardware, that leads to data breakage even when rate doesn't in fact change. E.g., user switches RTS/CTS handshake and suddenly gets broken bytes. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1567017475-11919-5-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: imx: do not disable individual irqs during termios changeSergey Organov
imx_set_termios(): disabling individual interrupt requests in UART for duration of the routine is pointless. Get rid of it. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1567017475-11919-4-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: imx: do not stop Rx/Tx on termios changeSergey Organov
imx_set_termios(): stopping receiver and transmitter does harm when something that doesn't touch transmission format/rate changes, such as RTS/CTS handshake. OTOH, it does no good on baud rate or format change, as synchronization on upper-level protocols is still required to do it right. Therefore, just stop doing it. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1567017475-11919-3-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: imx: get rid of unbounded busy-waiting loopSergey Organov
imx_set_termios(): remove busy-waiting "drain Tx FIFO" loop. Worse yet, it was potentially unbounded wait due to RTS/CTS (hardware) handshake. Let user space ensure draining is done before termios change, if draining is needed in the first place. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1567017475-11919-2-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: max310x: fix off-by-one buffer access when storing overrunJan Kundrát
A recent change split the insertion loop into two parts. The first part accessed bytes 0, 1, ... (rxlen - 2), and the second part by mistake took offset `rxlen` instead of the correct `rxlen - 1`. So one byte was not stored, and the final access wrote past the end of the rx_buf. Fixes: 9c12d739d69b (tty: max310x: Split uart characters insertion loop) Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/13ea227620aaad8a7231d42ed03a8508297d4eb3.1567027079.git.jan.kundrat@cesnet.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: serial: linflexuart: Use DEFINE_SPINLOCK() for spinlockWei Yongjun
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20190827114614.102037-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: 8250_pci: Implement MSI(-X) supportRalf Ramsauer
There may be setups, where legacy interrupts are not available. This is the caese, e.g., when Linux runs as guest (aka. non-root cell) of the partitioning hypervisor Jailhouse. There, only MSI(-X) interrupts are available for guests. But the 8250_pci driver currently only supports legacy ints. So let's enable MSI(-X) interrupts. Nevertheless, this needs to handled with care: while many 8250 devices actually claim to support MSI(-X) interrupts it should not be enabled be default. I had at least one device in my hands with broken MSI implementation. So better introduce a whitelist with devices that are known to support MSI(-X) interrupts. I tested all devices mentioned in the patch. Signed-off-by: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de> Link: https://lore.kernel.org/r/20190812112152.693622-1-ralf.ramsauer@oth-regensburg.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: 8250_pci: Add F81504A series SupportJi-Ze Hong (Peter Hong)
Fintek F81504A/508A/512A is PCIE to 4/8/12 UARTs device. It's support IO/MMIO/PCIE conf to access all functions. The old F81504/508/512 is only support IO. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Link: https://lore.kernel.org/r/1565933249-23076-1-git-send-email-hpeter+linux_kernel@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: mctrl_gpio: Use gpiod flags directlyAndy Shevchenko
Description of the modem line control GPIOs contain a boolean type to set direction of the line. Since GPIO library provides an enumerator type of flags, we may utilize it and allow a bit more flexibility on the choice of the type of the line parameters. It also removes an additional layer of value conversion. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190814140759.17486-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: serial: add dependence for CONFIG_SERIAL_FSL_LINFLEXUARTMao Wenan
When CONFIG_SERIAL_FSL_LINFLEXUART=y and CONFIG_PRINTK is not set, one compilation error is found as below: drivers/tty/serial/fsl_linflexuart.c: In function linflex_earlycon_putchar: drivers/tty/serial/fsl_linflexuart.c:608:31: error: CONFIG_LOG_BUF_SHIFT undeclared (first use in this function); did you mean CONFIG_ISA_BUS_API? if (earlycon_buf.len >= 1 << CONFIG_LOG_BUF_SHIFT) ^~~~~~~~~~~~~~~~~~~~ CONFIG_ISA_BUS_API This because CONFIG_LOG_BUF_SHIFT is depended on CONFIG_PRINTK, fix this by adding dependence for CONFIG_SERIAL_FSL_LINFLEXUART. Fixes: b953815b819b ("tty: serial: Add linflexuart driver for S32V234") Signed-off-by: Mao Wenan <maowenan@huawei.com> Link: https://lore.kernel.org/r/20190820124015.28409-1-maowenan@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: 8250_pci: Merge 8250_moxa to 8250_pciKai-Heng Feng
Moxa serial boards only need a special setup function, we can use generic 8250 framework for other parts. So let's merge 8250_moxa to 8250_pci. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20190816165124.16942-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: sprd: Add loopback function supportBaolin Wang
Add loopback function support for Spreadtrum serial controller. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/1275cd9968f1ceb5ac049cc23f1e508025cd552f.1566375260.git.baolin.wang@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: mxs-auart: Don't check for mctrl_gpio_to_gpiod() returning errorGeert Uytterhoeven
Since commit 1d267ea6539f2663 ("serial: mctrl-gpio: simplify init routine"), mctrl_gpio_init() returns failure if the assignment to any member of the gpio array results in an error pointer. Since commit c359522194593815 ("serial: mctrl_gpio: Avoid probe failures in case of missing gpiolib"), mctrl_gpio_to_gpiod() returns NULL in the !CONFIG_GPIOLIB case. Hence there is no longer a need to check for mctrl_gpio_to_gpiod() returning an error value. A simple NULL check is sufficient. This follows the spirit of commit 445df7ff3fd1a0a9 ("serial: mctrl-gpio: drop usages of IS_ERR_OR_NULL") in the mctrl-gpio core. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190814092924.13857-3-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 13:04:16 +0000