summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/max310x.c
AgeCommit message (Expand)Author
2018-06-28serial: max310x: Check the clock readinessJan Kundrát
2018-02-28gpio: serial: max310x: Use HW type for gpio_chip's labelJan Kundrát
2018-01-09gpio: serial: max310x: Support open-drain configuration for GPIOsJan Kundrát
2017-12-19serial: max310x: Reduce RX work starvationJan Kundrát
2017-12-19serial: max310x: Use batched reads when reasonably safeJan Kundrát
2017-12-19serial: max310x: use a batch write op for UART transmitJan Kundrát
2017-12-19serial: max310x: Support IRQ sharing with other devicesJan Kundrát
2017-12-19serial: max310x: Do not hard-code the IRQ typeJan Kundrát
2017-12-15serial: max310x: Fix invalid memory access during GPIO initJan Kundrát
2017-11-08tty: serial: Remove redundant license textGreg Kroah-Hartman
2017-11-08tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman
2017-01-12serial: max310x: Add support for newer silicon revisionsAlexander Shiyan
2016-09-15serial: max310x: Set IRQF_TRIGGER_FALLING flag when dev.of_node is not NULLLiu Xiang
2016-06-25serial: max310x: Assign port line automaticallyAlexander Shiyan
2016-06-25serial: max310x: Unregister UARTs on errorAlexander Shiyan
2016-06-25serial: max310x: Remove duplicate bits definitionAlexander Shiyan
2016-06-25serial: max310x: Register UART driver at module_initAlexander Shiyan
2016-06-25serial: max310x: Using resource-managed function for GPIOAlexander Shiyan
2016-06-25serial: max310x: Fix RS485 handlingAlexander Shiyan
2016-04-26serial: max310x: use gpiochip data pointerLinus Walleij
2015-11-19gpio: change member .dev to .parentLinus Walleij
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
2014-11-06drivers/max310: Use the rs485 functions on serial_coreRicardo Ribalda Delgado
2014-11-05serial/max310x: Remove obsolete #ifset TIOC[SG]RS485Ricardo Ribalda Delgado
2014-11-05max310x: max3109_detect should use indirect addressing in SPI mode for REVID ...Gregory Hermant
2014-09-18driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe
2014-07-09serial: treewide: Remove empty implementations of enable_ms()Alexander Shiyan
2014-06-19serial: Fix IGNBRK handlingPeter Hurley
2014-03-17serial: max310x: Add missing #include <linux/uaccess.h>Geert Uytterhoeven
2014-02-15serial: max310x: Fix sparse warningsAlexander Shiyan
2014-02-13serial: max310x: Fix build errorAlexander Shiyan
2014-02-13Revert "serial: max310x: Fix build error"Greg Kroah-Hartman
2014-02-13serial: max310x: Fix build warningAlexander Shiyan
2014-02-13serial: max310x: Fix build errorAlexander Shiyan
2014-02-13serial: max310x: Add devicetree supportAlexander Shiyan
2014-02-13serial: max310x: Driver cleanupAlexander Shiyan
2014-02-13serial: max310x: Add support for RS-485 modeAlexander Shiyan
2014-02-13serial: max310x: Add missing mutex_destroy() on driver exitAlexander Shiyan
2014-02-13serial: max310x: Always use dynamic GPIO ID assignmentAlexander Shiyan
2014-02-13serial: max310x: Migrate to CLK APIAlexander Shiyan
2014-02-13serial: max310x: Move all SPI-dependent stuff in one placeAlexander Shiyan
2014-02-13serial: max310x: Remove IRQ validationAlexander Shiyan
2014-02-13serial: max310x: Add the loopback mode supportAlexander Shiyan
2014-02-13serial: max310x: Remove excess port configure at startupAlexander Shiyan
2014-02-13serial: max310x: Remove init() and exit() callbacksAlexander Shiyan
2014-02-13serial: max310x: Setup baud rate generator more preciselyAlexander Shiyan
2013-10-16tty: Remove unnecessary semicolonsJoe Perches
2013-07-29serial: max310x: Fix dev_pm_opsAlexander Shiyan
2013-07-26serial: max310x: Add MAX14830 supportAlexander Shiyan
2013-07-26serial: max310x: Add MAX3109 supportAlexander Shiyan