Age | Commit message (Collapse) | Author |
|
gb_pm_runtime_get_sync has increased the usage counter of the device here.
Forgetting to call gb_pm_runtime_put_noidle will result in usage counter
leak in the error branch of (gbcodec_hw_params and gbcodec_prepare). We
fixed it by adding it.
Fixes: c388ae7696992 ("greybus: audio: Update pm runtime support in dai_ops callback")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201109131347.1725288-2-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct code indentation and realignment as per the coding style
guidelines. Issue reported by checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20201022063230.GA351623@ubuntu204
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
snd_soc_pcm_stream.formats should use the bitmask SNDRV_PCM_FMTBIT_*
instead of the sequential integers SNDRV_PCM_FORMAT_* as explained by
commit e712bfca1ac1f63f622f87c2f33b57608f2a4d19
("ASoC: codecs: use SNDRV_PCM_FMTBIT_* for format bitmask").
Found by sparse,
$ make C=2 drivers/staging/greybus/
drivers/staging/greybus/audio_codec.c:691:36: warning: incorrect type in initializer (different base types)
drivers/staging/greybus/audio_codec.c:691:36: expected unsigned long long [usertype] formats
drivers/staging/greybus/audio_codec.c:691:36: got restricted snd_pcm_format_t [usertype]
drivers/staging/greybus/audio_codec.c:701:36: warning: incorrect type in initializer (different base types)
drivers/staging/greybus/audio_codec.c:701:36: expected unsigned long long [usertype] formats
drivers/staging/greybus/audio_codec.c:701:36: got restricted snd_pcm_format_t [usertype]
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20201002233057.74462-2-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Greybus Codec driver allows modules to be dynamically added and removed,
which further requires updating the DAPM configurations as well.
With current snd_soc architecture, dynamic audio modules is not yet
supported. This patch provides helper APIs to update DAPM configurations
in response to modules which are dynamically added or removed. The
source is primarily based on snd_dapm.c
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/35e1baaae10a3f2162e71be4c2f75a701584f0e6.1594290158.git.vaibhav.sr@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Due to dependencies on ASoC framework changes, GB dummy codec module
compilation is currently disabled. This patch updates codec driver as
per the latest ASoC APIs.
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/dd66a960fca186da055600fe1e622b7a814cb543.1594290158.git.vaibhav.sr@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As per the current implementation for GB codec driver, a jack list is
maintained for each module. And it expects the list to be populated by
the snd_soc_jack structure which would require modifications in
mainstream code.
However, this is not a necessary requirement and the list can be easily
maintained within gbaudio_module_info as well. This patch provides the
relevant changes for the same.
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/4ee030af7a8e203f89a6e513313e36f4e2991e5b.1594290158.git.vaibhav.sr@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
snd_soc_jack APIs are modified in recent kernel versions. This patch
updates the codec driver to resolve the compilation errors related to
jack framework.
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/896b8e24d990f2bca5aafaebd26e37095042951e.1594290158.git.vaibhav.sr@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
platform_driver_register will set the .owner field. So it is safe
to remove the redundant assignment.
The issue is detected with the help of Coccinelle.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following errors found by checkpatch.pl:
CHECK: Prefer kernel type 'u32' over 'uint32_t'
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
previous line
Fix the following error found by checkpatch.pl:
CHECK: Logical continuations should be on the previous line
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Space is required when using the question mark operator around ':'
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the blank lines.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup "Alignment should match open parenthesis" checkpatch.pl errors.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the SPDX tag is in all greybus files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/greybus files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
snd_soc_dai_ops are not supposed to change at runtime. All functions
working with snd_soc_dai_ops provided by <sound/soc-dai.h> work with
const snd_soc_dai_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes only obvious lines.
There are still more issues.
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Dummy codec register were initially added while populating dummy codec
mixer controls until module topology parser was available. Now, these
dummy registers are nowhere used and thus can be safely removed.
Since ASoC framework requires a valid callback for both read & write
register APIS, currently empty placeholders are kept to avoid panic.
Later, register mapping logic can be defined:
1. Assuming fixed number of maximum modules connected and register bits
corresponds to basic info of each module OR
2. With a logic to dynamically grow register_cache_size based on codec
modules added/removed.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Uninitialized variable sig_bits was used while configuring stream params
for codec module. These params are used to configure PCM settings for
APBridgeA.
Usually, this is dependent on codec capability and thus populated via
codec dai_driver definition. In our case, it is fixed to 16 based on the
data format, container supported.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove return statement that is immediately followed by the function
closing bracket.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added braces to else statement where checkpatch complained.
Signed-off-by: Chase Metzger <chasemetzger15@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Minor error spotted by checkpatch.pl in greybus
code indent should use tabs where possible
Signed-off-by: Richard Groux <rgroux@sauron-mordor.net>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Minor error spotted by checkpatch.pl in greybus
space required before the open brace '{'
Signed-off-by: Richard Groux <rgroux@sauron-mordor.net>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As suggested by checkpatch.pl:
CHECK: Prefer kernel type 'u16' over 'uint16_t'
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As suggested by checkpatch.pl:
CHECK: Prefer kernel type 'u8' over 'uint8_t'
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added extra fields namely jack_mask & button_mask for each module_info.
These fields are required while registering jack & reporting jack
events.
Earlier, these were hard coded values assuming fixed capabilities say
HEADSET, LINEOUT, etc. supported by GB-codec driver. Now these are
computed dynamically based on module's jack capability shared via
topology data.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
snd_jack will be registered based on real capabilities shared by
module's FW instead of parsing widgets and register it with fixed
capabilities. Remove module_info->num_jack, since it is no more
required.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The direction value passed to gb_audio_apbridgea_register_cport()
in the gbaudio_module_enable_rx() routine is TX and not RX like
it should be so fix it.
Testing Done: Recorded microphone data from a headset.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Fixes: c80e7c6fafa5 ("audio: Split helper APIs based on stream direction")
Tested-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewd-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
For GB module with jack slot supported, headset/headphone can still
be inserted at the time of module removal. In this case, above layer is
unaware about jack removal event which happened due to module removal.
This may lead to inconsistent state in above HAL layer. Fix this by
reporting jack removal event explicitly.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
For SPK module, each data connection corresponds to codec DAI. Now
stream state is maintained for each DAI. So, need to maintain stream
state for each DAI/data connection for individual module as well.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Runtime streams are required while configuring GB module plugged-in
during active stream. Currently, it is maintained for single stream.
However, this should be maintained for a stream corresponding to each
DAI. Fix this!
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Ensure pm runtime get_sync/put protection in codec_dai ops callback
functions before accessing apbridge.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently we are using dai->name to identify data connection from list
for a module. Now since we are enabling data path based on widget,
dai->name might be invalid by the time driver receives disable request
for a widget. So, use id fetched from AIF widget->sname to identify data
connection for a module.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently, SPK Amp switch is used to identify when to enable data path
between module and APB. With headset, other switch controls added, it is
not possible to use this switch to control data path. Instead path
should be established based on AIF widget.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Earlier, module path was enabled based on module's control switch e.g.
'SPK Amp switch'. Thus widget's name was sufficient to parse and
identify the direction. Now individual modules' path will be enabled
based on AIF widget status. So, it is required to get complete widget
details, say w->type is used to identify direction (playback/capture)
and w->sname is used to identify module's DATA connection used for
communication via greybus.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently, the stream name for the DAI driver is generically set to "GB
Audio Playback" and "GB Audio Capture". This is OK since we use a single
interface on APB1 but that could change in the future. Update the DAI
driver table entries to properly reflect the interface used.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Now, module is enabled/disabled based on widget event only and not
during startup/shutdown callbacks. Thus, we needn't compare codec_state
in enable/disable module helper APIs. Also, these can be further
simplified based on stream direction.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
As per current implementation, audio data is played from each individual
SPK module connected to endo frame. This is not a valid requirement in
case of capture/headset path. So, provide a mechanism to enable
individual module path based on it's control switch state.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
For most of the helper functions, goto statement is widely used. It was
originally used with an intent of single exit point for the function
with some cleanup required. This is no more the case. So, simplify code
by avoiding un-necessary gotos.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
It is suggested to avoid using ARA keyword externally. So we need to
update GB codec driver. Also, codec name is currently set to 'gb-codec'.
However, it makes more sense to name it as apb-dummy-codec, since it is
used to control various audio modules connected to APB via greybus.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
During shutdown sequence, in case all modules are already removed,
codec state is not updated. Though it's not causing any harm for now,
but it's good to maintain proper codec state. Fix this.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Alex Elder <elder@linaro.org>
|
|
In case module is removed dynamically with ongoing playback, during
module cleanup codec state is mistakenly modified. State should be
modified for module only. Fix this.
Fixes: 76414cb499b7 ("audio: Use single codec driver
registration")
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Alex Elder <elder@linaro.org>
|
|
The return statement immediately after the BUG_ON of the gbcodec_write()
call is added by mistake. It's not causing any errors right now due to
that gbcodec_reg is currently not being used.
Testing Done:
- Audio playback on EVT2
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This patch removes few blank lines across the repository at places where
two blank lines were present together or when a blank line is present at
the start or end of a routine.
Note that this doesn't remove most of them from greybus_protocols.h as
they were added on purpose.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
While reordering gb_deactivate sequence to avoid protocol error this was
mistakenly added even during shutdown_tx/rx. It is supposed to be done
immediately after stop_tx and only once.
Fixes: 739f25d5f490 ("audio: Reorder gb_deactivate sequence to avoid protocol error")
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently trigger callback is used to start/stop greybus tx/rx
path. This works well for almost all scenario except few
specially handled usecases by Android Audio subsystem.
In case of Music playback followed by Incoming ringtone, above
layer tries to trigger_pause from one FE dailink and start a
fresh playback via different FE dailink. Since, same BE dailink
is used for both cases, an invalid state transition is requested
i.e. from PAUSE->START. This fails & thus causes ringtone playback
failure. With built-in codec, trigger callback is not required to
initiate data xfer unlike gb-codec driver.
This state transition should be handled in Android layer, but
since it can lead to multiple side effects for various usecase
we are trying to avoid trigger callback in gbcodec driver as well.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
In case of audio mgmt connection failure, GB requests would fail giving
an error message within the driver and reporting error. However there is
no error handling in above HAL and it'll keep on triggering similar
request via GB codec driver. This may overflood serial console. In one
of the instance it locked CPU for >10sec and caused a watchdog bite.
Thus ratelimit those error messages.
Testing Done: compile tested
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Earlier codec->lock protects almost complete register/unregister
module function. This can be reduced to specific operations.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Modify sequence of register_module & unregister_module in bundle
driver. This would affect the uevent generated for above user
space. Accordingly, we need to modify snd_soc_xxx sequence in
register_module() in codec driver.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Each module maintains connected status & a lock to protect it.
Using codec->lock we can safely serialize ASoC specific callbacks
(in response to mixer_ctl update or dai_ops) and gb module
disconnect. Thus is_connected field can be removed.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|