Age | Commit message (Collapse) | Author |
|
Add support for reading the LSI DEVID register which is present in
SYSC block of RZ/G2{L,LC} SoC's.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609163717.3083-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add ARCH_R9A07G044 as a configuration symbol for the new Renesas
RZ/G2L SoC variants.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609153230.6967-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Currently, there are two drivers binding to the R-Mobile System
Controller (SYSC):
- The rmobile-sysc driver registers PM domains from a core_initcall(),
and does not use a platform driver,
- The optional rmobile-reset driver registers a reset handler, and
does use a platform driver.
As fw_devlink only considers devices, commit bab2d712eeaf9d60 ("PM:
domains: Mark fwnodes when their powerdomain is added/removed") works
only for PM Domain drivers where the DT node is a real device node, and
not for PM Domain drivers using a hierarchical representation inside a
subnode. Hence if fw_devlink is enabled, probing of on-chip devices
that are part of the SYSC PM domain is deferred until the optional
rmobile-reset driver has been bound. If the rmobile-reset driver is
not available, this will never happen, and thus lead to complete system
boot failures.
Fix this by explicitly marking the fwnode initialized.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210216123958.3180014-1-geert+renesas@glider.be
|
|
As of commit b587288001f05c0e ("ARM: shmobile: R-Mobile: Remove legacy
PM Domain code"), the R-Mobile System Controller driver no longer
handles the adding of platform devices to PM Domains, but delegates that
to the PM Domain core code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210205132141.1920137-1-geert+renesas@glider.be
|
|
The R-Car System Controller (SYSC) driver registers PM domains from an
early_initcall(). It does not use a platform driver, as secondary CPU
startup on R-Car H1 needs to control the CPU power domains, before
initialization of the driver framework.
As fw_devlink only considers devices, it does not know that the System
Controller is ready. Hence probing of on-chip devices that are part of
the SYSC PM domain fails if fw_devlink is enabled:
probe deferral - supplier e6180000.system-controller not ready
Fix this by setting the OF_POPULATED flag for the SYSC device node after
successful initialization. This will make of_link_to_phandle() ignore
the SYSC device node as a dependency, and consumer devices will be
probed again.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210128082847.2205950-1-geert+renesas@glider.be
|
|
Replace the open-coded polling loops by calls to the
readl_poll_timeout_atomic() helper macro.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210125142606.1050130-1-geert+renesas@glider.be
|
|
There is no reason to keep on using the __raw_{read,write}l() I/O
accessors in Renesas ARM driver code. Switch to using the plain
{read,write}l() I/O accessors, to have a chance that this works on
big-endian.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201119125214.4065925-1-geert+renesas@glider.be
|
|
This code needs to call iounmap() on one error path.
Fixes: 2173fc7cb681 ("ARM: shmobile: R-Mobile: Add DT support for PM domains")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200923113142.GC1473821@mwanda
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for R-Car V3U (R8A779A0) SoC power areas and register
access, because register specification differs from R-Car Gen2/3.
Inspired by patches in the BSP by Tho Vu.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599810232-29035-5-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for R-Car V3U (R8A779A0) to the R-Car RST driver.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599470390-29719-12-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for identifying the R-Car V3U (R8A779A0) SoC.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599470390-29719-10-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This patch sorts each driver by description title in alphabetical order.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6y2v54o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
For easy understanding of architecture and alphabetical merging, this
patch uses ARM32/ARM64 for description.
This prepares for sorting the menu.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bliiv54u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Now, Renesas SoC drivers are under menu, but current descriptions are
not aligned.
This patch aligns them.
- Emma Mobile EV2
- RZ/A1H (R7S72100)
...
- R-Car H2 (R8A77900)
...
- Renesas R-Car H3 ES1.x SoC Platform
...
- R-Car H2 System Controller support
- R-Car M2-W/N System Controller support
- R-Car V2H System Controller support
- R-Car E2 System Controller support
- R-Car H3 System Controller support
- R-Car M3-W System Controller support
- R-Car M3-W+ System Controller support
- R-Car M3-N System Controller support
+ SoC Platform support for Emma Mobile EV2
+ SoC Platform support for RZ/A1H+
...
+ SoC Platform support for R-Car H2
...
+ SoC Platform support for R-Car H3 ES1.x
...
+ System Controller support for R-Car H2
+ System Controller support for R-Car M2-W/N
+ System Controller support for R-Car V2H
+ System Controller support for R-Car E2
+ System Controller support for R-Car H3
+ System Controller support for R-Car M3-W
+ System Controller support for R-Car M3-W+
+ System Controller support for R-Car M3-N
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zh6kyedc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Renesas related SoC settings are located on TOP level menu,
thus it is very verbose.
This patch groups Renesas related settings into
"Renesas SoC driver support" menu.
And it aligns config menu names.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0xxho7t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for RZ/G2H (R8A774E1) to the R-Car RST driver.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This patch adds support for identifying the RZ/G2H (r8a774e1) SoC.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add configuration option for the RZ/G2H (R8A774E1) SoC.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for RZ/G2H (R8A774E1) SoC power areas to the R-Car SYSC
driver.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594138692-16816-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add configuration option for the RZ/G1H (R8A77420) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1588197415-13747-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for RZ/G1H (R8A7742) to the R-Car RST driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1587678050-23468-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for RZ/G1H (R8A7742) SoC power areas to the R-Car SYSC driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1587678050-23468-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
|
|
Replace the final user of CONFIG_ARCH_R8A7795 by CONFIG_ARCH_R8A77950 ||
CONFIG_ARCH_R8A77951, and remove the now unused CONFIG_ARCH_R8A7795
symbol definition.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200218112449.5723-1-geert+renesas@glider.be
|
|
This patch corrects the SPDX License Identifier style in
header file related to Renesas Soc driver support.
It assigns explicit block comment to the SPDX License Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Link: https://lore.kernel.org/r/20200118124856.GA3421@nishad
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
SH-Mobile AG5 and R-Car H1 SoCs are based on the Cortex-A9 MPCore, which
includes a global timer.
Enable the ARM global timer on these SoCs, which will be used for:
- the scheduler clock, improving scheduler accuracy from 10 ms to 3 or
4 ns,
- delay loops, allowing removal of calls to shmobile_init_delay() from
the corresponding machine vectors.
Note that when using an old DTB lacking the global timer, the kernel
will still work. However, loops-per-jiffies will no longer be preset,
and the delay loop will need to be calibrated during boot.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191211135222.26770-5-geert+renesas@glider.be
|
|
Despite using the same compatible values ("r8a7795"-based) because of
historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+
(R8A77951) are really different SoCs, with different part numbers.
Reflect this in the SoC configuration, by adding CONFIG_ARCH_R8A77950
and CONFIG_ARCH_R8A77951 as new config symbols. These are intended to
replace CONFIG_ARCH_R8A7795, and will allow making support for early SoC
revisions optional.
Note that for now, CONFIG_ARCH_R8A7795 is retained, and just selects
CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951. This relaxes
dependencies of other subsystems on the SoC configuration symbol, and
provides a smooth transition path for config files through "make
oldconfig".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191217183841.432-6-geert+renesas@glider.be
|
|
The configure call back takes a register pointer, so should
have been marked with __iomem. Add this to silence the
following sparse warnings:
drivers/soc/renesas/rcar-rst.c:33:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
drivers/soc/renesas/rcar-rst.c:33:22: expected int ( *configure )( ... )
drivers/soc/renesas/rcar-rst.c:33:22: got int ( * )( ... )
drivers/soc/renesas/rcar-rst.c:97:40: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/renesas/rcar-rst.c:97:40: expected void *base
drivers/soc/renesas/rcar-rst.c:97:40: got void [noderef] <asn:2> *[assigned] base
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20191218135230.2610161-1-ben.dooks@codethink.co.uk
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
All users of CONFIG_ARCH_R8A7796 have been updated to use
CONFIG_ARCH_R8A77960, so the former can be removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191211100510.7182-1-geert+renesas@glider.be
|
|
Add support for the power areas in the Renesas R-Car M3-W+ (R8A77961)
SoC to the R-Car System Controller driver.
R-Car M3-W+ (aka R-Car M3-W ES3.0) is very similar to R-Car
M3-W (R8A77960), which allows for both SoCs to share a driver:
- R-Car M3-W+ lacks the A2VC power area, so its area must be
nullified,
- The existing support for the SYSCEXTMASK register added in commit
9bd645af9d2a49ac ("soc: renesas: r8a7796-sysc: Fix power request
conflicts") applies to ES3.0 and later only.
As R-Car M3-W+ uses a different compatible value, differentiate
based on that, instead of on the ES version.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-7-geert+renesas@glider.be
|
|
Add support for the Reset block in the R-Car M3-W+ (R8A77961) SoC to the
Renesas R-Car RST driver.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-6-geert+renesas@glider.be
|
|
Add support for identifying the R-Car M3-W+ (R8A77961) SoC, which shares
the Product ID Number with R-Car M3-W (R8A77960), but differs in CUT
Number (Ver. 3.0), and uses a different compatible value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-5-geert+renesas@glider.be
|
|
Add CONFIG_ARCH_R8A77961 as a configuration symbol for the new Renesas
R-Car M3-W+ (R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-4-geert+renesas@glider.be
|
|
Add CONFIG_ARCH_R8A77960 as a new config symbol for R-Car M3-W
(R8A77960), to replace CONFIG_ARCH_R8A7796, and avoid confusion with
R-Car M3-W+ (R8A77961), which will use CONFIG_ARCH_R8A77961.
Note that for now, CONFIG_ARCH_R8A7796 is retained, and just selects
CONFIG_ARCH_R8A77960. This relaxes dependencies of other subsystems on
the SoC configuration symbol, and provides a smooth transition path for
config files through "make oldconfig".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-3-geert+renesas@glider.be
|
|
Rename CONFIG_SYSC_R8A7796 for R-Car M3-W (R8A77960) to
CONFIG_SYSC_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
which will use CONFIG_SYSC_R8A77961.
Rename r8a7796_sysc_info and r8a7796_sysc_init for consistency.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-2-geert+renesas@glider.be
|
|
If the DTB for a device with an RZ/A2 SoC lacks a device node for the
BSID register, the ID validation code falls back to using a register at
address 0x0, which leads to undefined behavior (e.g. reading back a
random value).
This could be fixed by letting fam_rza2.reg point to the actual BSID
register. However, the hardcoded fallbacks were meant for backwards
compatibility with old DTBs only, not for new SoCs. Hence fix this by
validating renesas_family.reg before using it.
Fixes: 175f435f44b724e3 ("soc: renesas: identify RZ/A2")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191016143306.28995-1-geert+renesas@glider.be
|
|
Add support for RZ/G2N (R8A774B1) SoC power areas to the R-Car SYSC
driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Link: https://lore.kernel.org/r/1569223780-54304-1-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
No R-Car or RZ/G SYSC driver uses any of the definitions provided by
<linux/bug.h>, hence there is no need to include this header file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190920144705.27394-1-geert+renesas@glider.be
|
|
Describe the location and contents of the SYSCEXTMASK register on
RZ/G2E, to prevent conflicts between internal and external power
requests.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190920143523.23125-1-geert+renesas@glider.be
|
|
Add support for RZ/G2N (R8A774B1) to the R-Car RST driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Link: https://lore.kernel.org/r/1568881036-4404-5-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This patch adds support for identifying the RZ/G2N (r8a774b1) SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Link: https://lore.kernel.org/r/1567675844-19247-3-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add configuration option for the RZ/G2N (R8A774B1) SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Link: https://lore.kernel.org/r/1567675844-19247-4-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Describe the location and contents of the SYSCEXTMASK register on R-Car
E3, to prevent conflicts between internal and external power requests.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-8-geert+renesas@glider.be
|
|
Describe the location and contents of the SYSCEXTMASK register on R-Car
V3H, to prevent conflicts between internal and external power requests.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-7-geert+renesas@glider.be
|
|
Describe the location and contents of the SYSCEXTMASK register on R-Car
V3M, to prevent conflicts between internal and external power requests.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-6-geert+renesas@glider.be
|
|
Describe the location and contents of the SYSCEXTMASK register on R-Car
M3-N, to prevent conflicts between internal and external power requests.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-5-geert+renesas@glider.be
|
|
Describe the location and contents of the SYSCEXTMASK register on R-Car
M3-W, to prevent conflicts between internal and external power requests.
This register does not exist on R-Car M3-W ES1.x.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-4-geert+renesas@glider.be
|
|
Describe the location and contents of the SYSCEXTMASK register on R-Car
H3, to prevent conflicts between internal and external power requests.
This register does not exist on R-Car H3 ES1.x and ES2.x.
Based on a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-3-geert+renesas@glider.be
|
|
Recent R-Car Gen3 SoCs added an External Request Mask Register to the
System Controller (SYSC). This register allows to mask external power
requests for CPU or 3DG domains, to prevent conflicts between powering
off CPU cores or the 3D Graphics Engine, and changing the state of
another power domain through SYSC, which could lead to CPG state machine
lock-ups.
Add support for making use of this register. Take into account that the
register is optional, and that its location and contents are
SoC-specific.
Note that the issue fixed by this cannot happen in the upstream kernel,
as upstream has no support for graphics acceleration yet. SoCs lacking
the External Request Mask Register may need a different mitigation in
the future.
Inspired by a patch in the BSP by Dien Pham <dien.pham.ry@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190828113618.6672-2-geert+renesas@glider.be
|
|
ARM Erratum 754322 affects Cortex-A9 revisions r2p* and r3p*.
Automatically enable support code to mitigate the erratum when compiling
a kernel for any of the affected Renesas SoCs:
- RZ/A1: r3p0,
- R-Mobile A1: r2p4,
- R-Car M1A: r2p2-00rel0,
- R-Car H1: r3p0,
- SH-Mobile AG5: r2p2.
EMMA Mobile EV2 (r1p3) and RZ/A2 (r4p1) are not affected.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
|