summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla4xxx
AgeCommit message (Collapse)Author
2021-06-18scsi: qla4xxx: Remove redundant continue statementColin Ian King
The continue statement at the end of a for-loop has no effect, remove it. Link: https://lore.kernel.org/r/20210617073743.151008-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Continue has no effect")
2021-06-02scsi: iscsi: Rel ref after iscsi_lookup_endpoint()Mike Christie
Subsequent commits allow the kernel to do ep_disconnect. In that case we will have to get a proper refcount on the ep so one thread does not delete it from under another. Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Stop queueing during ep_disconnectMike Christie
During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new I/O but every driver except cxgbi and iscsi_tcp can still get I/O from __iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before ep_disconnect. This could happen if we were terminating the session, and the logout timed out before it was even sent to libiscsi. Fix the issue by adding a helper which reverses the bind_conn call that allows new I/O to be queued. Drivers implementing ep_disconnect can use this to make sure new I/O is not queued to them when handling the disconnect. Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-10scsi: qla4xxx: Simplify conditionalWan Jiabing
Fix the following coccicheck warning: ./drivers/scsi/qla4xxx/ql4_83xx.c:475:23-25: WARNING !A || A && B is equivalent to !A || B Link: https://lore.kernel.org/r/20210414121726.12503-1-wanjiabing@vivo.com Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: qla4xxx: Remove an unused functionBart Van Assche
This was detected by building the kernel with clang and W=1. Link: https://lore.kernel.org/r/20210415220826.29438-13-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qla4xxx: Remove unneeded if-null-free checkQiheng Lin
Eliminate the following coccicheck warning: drivers/scsi/qla4xxx/ql4_os.c:4175:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:4196:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:4215:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:6400:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:6402:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:6555:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:6557:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:7838:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:7840:2-7: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/20210409120345.6447-1-linqiheng@huawei.com Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: qla4xxx: Fix kernel-doc formatting and misnaming issueLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_mbx.c:47: warning: wrong kernel-doc identifier on line: drivers/scsi/qla4xxx/ql4_mbx.c:947: warning: expecting prototype for qla4xxx_set_fwddb_entry(). Prototype was for qla4xxx_set_ddb_entry() instead Link: https://lore.kernel.org/r/20210303144631.3175331-20-lee.jones@linaro.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: qla4xxx: Fix formatting issues - missing '-' and '_'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_os.c:631: warning: expecting prototype for qla4xxx_create chap_list(). Prototype was for qla4xxx_create_chap_list() instead drivers/scsi/qla4xxx/ql4_os.c:9643: warning: expecting prototype for gets called if(). Prototype was for qla4xxx_pci_mmio_enabled() instead Link: https://lore.kernel.org/r/20210303144631.3175331-13-lee.jones@linaro.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-09scsi: qla4xxx: Fix a typoBhaskar Chowdhury
s/circuting/circuiting/ Link: https://lore.kernel.org/r/20210301131736.14236-1-unixbhaskar@gmail.com Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-08scsi: qla4xxx: Use iscsi_is_session_online()Mike Christie
__qla4xxx_is_chap_active() just wants to know if a session is online and does not care about why it's not, so this has it use iscsi_is_session_online(). This is not a bug now, but the next patch changes the behavior of iscsi_session_chkready() so this patch just prepares the driver for that change. Link: https://lore.kernel.org/r/20210207044608.27585-9-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: qla4xxx: Use standard SAM status definitionsHannes Reinecke
Use standard SAM status definitions and drop the driver-defined ones. Link: https://lore.kernel.org/r/20210113090500.129644-14-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: qla4xxx: Remove redundant assignment to variable rvalColin Ian King
The variable rval is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Link: https://lore.kernel.org/r/20201204191810.1150995-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unused value")
2020-12-01scsi: qla4xxx: Remove in_interrupt() from qla4_82xx_rom_lock()Ahmed S. Darwish
qla4_82xx_rom_lock() spins on a certain hardware state until it is updated. At the end of each spin, if in_interrupt() is true, it does 20 loops of cpu_relax(). Otherwise, it yields the CPU. While in_interrupt() is ill-defined and does not provide what the name suggests, it is not needed here: qla4_82xx_rom_lock() is always called from process context. Below is an analysis of its callers: - ql4_nx.c: qla4_82xx_rom_fast_read(), all process context callers: => ql4_nx.c: qla4_82xx_pinit_from_rom(), GFP_KERNEL allocation => ql4_nx.c: qla4_82xx_load_from_flash(), msleep() in a loop - ql4_nx.c: qla4_82xx_pinit_from_rom(), earlier discussed - ql4_nx.c: qla4_82xx_rom_lock_recovery(), bound to "isp_operations" ->rom_lock_recovery() hook, which has one process context caller, qla4_8xxx_device_bootstrap(), with callers: => ql4_83xx.c: qla4_83xx_need_reset_handler(), process, msleep() => ql4_nx.c: qla4_8xxx_device_state_handler(), multiple msleep()s - ql4_nx.c: qla4_82xx_read_flash_data(), has cond_resched() Remove the in_interrupt() check. Mark, qla4_82xx_rom_lock(), and the ->rom_lock_recovery() hook, with "Context: task, can sleep". Change qla4_82xx_rom_lock() implementation to sleep 20ms, instead of a schedule(), for each spin. This is more deterministic, and it matches the other implementations bound to ->rom_lock_recovery(). Link: https://lore.kernel.org/r/20201126132952.2287996-9-bigeasy@linutronix.de Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: <GR-QLogic-Storage-Upstream@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-01scsi: qla4xxx: Remove in_interrupt() from qla4_82xx_idc_lock()Ahmed S. Darwish
qla4_82xx_idc_lock() spins on a certain hardware state until it is updated. At the end of each spin, if in_interrupt() is true, it does 20 loops of cpu_relax(). Otherwise, it yields the CPU. While in_interrupt() is ill-defined and does not provide what the name suggests, it is not needed here: qla4_82xx_idc_lock() is always called from process context. Below is an analysis of its callers: - ql4_nx.c: qla4_82xx_need_reset_handler(), 1-second msleep() in a loop. - ql4_nx.c: qla4_82xx_isp_reset(), calls qla4_8xxx_device_state_handler(), which has multiple msleep()s. Beside direct calls, qla4_82xx_idc_lock() is also bound to isp_operations ->idc_lock() hook. Other functions which are bound to the same hook, e.g. qla4_83xx_drv_lock(), also have an msleep(). For completeness, below is an analysis of all callers of that hook: - ql4_83xx.c: qla4_83xx_need_reset_handler(), has an msleep() - ql4_83xx.c: qla4_83xx_isp_reset(), calls qla4_8xxx_device_state_handler(), which has multiple msleep()s. - ql4_83xx.c: qla4_83xx_disable_pause(), all process context callers: => ql4_mbx.c: qla4xxx_mailbox_command(), msleep(), mutex_lock() => ql4_os.c: qla4xxx_recover_adapter(), schedule_timeout() in loop => ql4_os.c: qla4xxx_do_dpc(), workqueue context - ql4_attr.c: qla4_8xxx_sysfs_write_fw_dump(), sysfs bin_attribute ->write() hook, process context - ql4_mbx.c: qla4xxx_mailbox_command(), earlier discussed - ql4_nx.c: qla4_8xxx_device_bootstrap(), callers: => ql4_83xx.c: qla4_83xx_need_reset_handler(), process, msleep() => ql4_nx.c: qla4_8xxx_device_state_handler(), earlier discussed - ql4_nx.c: qla4_8xxx_need_qsnt_handler(), callers: => ql4_nx.c: qla4_8xxx_device_state_handler(), multiple msleep()s => ql4_os.c: qla4xxx_do_dpc(), workqueue context - ql4_nx.c: qla4_8xxx_update_idc_reg(), callers: => ql4_nx.c: qla4_8xxx_device_state_handler(), earlier discussed => ql4_os.c: qla4_8xxx_error_recovery(), only called by qla4xxx_pci_slot_reset(), which is bound to PCI ->slot_reset() process-context hook - ql4_nx.c: qla4_8xxx_device_state_handler(), earlier discussed - ql4_os.c: qla4xxx_recover_adapter(), earlier discussed - ql4_os.c: qla4xxx_do_dpc(), earlier discussed Remove the in_interrupt() check. Mark, qla4_82xx_idc_lock(), and the ->idc_lock() hook itself, with "Context: task, can sleep". Change qla4_82xx_idc_lock() implementation to sleep 100ms, instead of a schedule(), for each spin. This is more deterministic, and it matches other PCI HW locking functions in the driver. Link: https://lore.kernel.org/r/20201126132952.2287996-8-bigeasy@linutronix.de Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: <GR-QLogic-Storage-Upstream@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-01scsi: qla4xxx: Remove in_interrupt()Ahmed S. Darwish
qla4_82xx_crb_win_lock() spins on a certain hardware state until it's updated. At the end of each spin, if in_interrupt() is true, it does 20 loops of cpu_relax(). Otherwise, it yields the CPU. The in_interrupt() macro is ill-defined as it does not provide what the name suggests, and it does not catch the intended use-case here. qla4_82xx_crb_win_lock() is always invoked with scsi_qla_host::hw_lock acquired, with disabled interrupts. If the caller is in process context, as in qla4_82xx_need_reset_handler(), then in_interrupt() will return false even though it is not allowed to call schedule(). Remove the in_interrupt() check. Change qla4_82xx_crb_win_lock() specification to a purely atomic function. Mark it as static, remove its forward declaration, and move it above its callers. To avoid hammering the PCI bus while spinning, use a 10 micro-second delay instead of cpu_relax(). Link: https://lore.kernel.org/r/20201126132952.2287996-4-bigeasy@linutronix.de Fixes: f4f5df23bf72 ("[SCSI] qla4xxx: Added support for ISP82XX") Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: <GR-QLogic-Storage-Upstream@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-17scsi: qla4xxx: Remove redundant assignment to variable rvalJing Xiangfeng
The variable rval has been initialized with 'QLA_ERROR'. The assignment is redundant in an error path. Remove it. Link: https://lore.kernel.org/r/20201103120137.109717-1-jingxiangfeng@huawei.com Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-23Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "The set of core changes here is Christoph's submission path cleanups. These introduced a couple of regressions when first proposed so they got held over from the initial merge window pull request to give more testing time, which they've now had and Syzbot has confirmed the regression it detected is fixed. The other main changes are two driver updates (arcmsr, pm80xx) and assorted minor clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: qla2xxx: Fix return of uninitialized value in rval scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands scsi: sr: Initialize ->cmd_len scsi: arcmsr: Update driver version to v1.50.00.02-20200819 scsi: arcmsr: Add support for ARC-1886 series RAID controllers scsi: arcmsr: Fix device hot-plug monitoring timer stop scsi: arcmsr: Remove unnecessary syntax scsi: pm80xx: Driver version update scsi: pm80xx: Increase the number of outstanding I/O supported to 1024 scsi: pm80xx: Remove DMA memory allocation for ccb and device structures scsi: pm80xx: Increase number of supported queues scsi: sym53c8xx_2: Fix sizeof() mismatch scsi: isci: Fix a typo in a comment scsi: qla4xxx: Fix inconsistent format argument type scsi: myrb: Fix inconsistent format argument types scsi: myrb: Remove redundant assignment to variable timeout scsi: bfa: Fix error return in bfad_pci_init() scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup() scsi: snic: Simplify the return expression of svnic_cq_alloc() scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc() ...
2020-10-14Merge tag 'spdx-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are some SPDX-specific changes for 5.10-rc1. They include: - driver fixes to make spdxcheck.pl work properly - add GFDL licenses as "deprecated" but required due to some of our documentation using them - add Zlib license as "deprecated" but required because we have code with this license in the tree. - convert some drivers to have SPDX identifiers that previously didn't have them. All have been in linux-next for a very long time with no reported issues" * tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: scripts/spdxcheck.py: handle license identifiers in XML comments net/mlx5: IPsec: make spdxcheck.py happy LICENSES/deprecated: add Zlib license text LICENSE: add GFDL deprecated licenses net/qla3xxx: Convert to SPDX license identifiers net/qlge: Convert to SPDX license identifiers net/qlcnic: Convert to SPDX license identifiers scsi/qla2xxx: Convert to SPDX license identifiers scsi/qla4xxx: Convert to SPDX license identifiers
2020-10-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ...
2020-10-07scsi: qla4xxx: Fix inconsistent format argument typeYe Bin
Fix the following warning: [drivers/scsi/qla4xxx/ql4_nx.c:3228]: (warning) %ld in format string (no. 1) requires 'long' but the argument type is 'unsigned long'. Link: https://lore.kernel.org/r/20200930022228.2840587-1-yebin10@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-02scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changedYe Bin
Fixes coccicheck warning: drivers/scsi/qla4xxx/ql4_init.c:1173:5-11: Unneeded variable: "status". Return "QLA_ERROR" on line 1195 Link: https://lore.kernel.org/r/20200916022749.348923-1-yebin10@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-16scsi/qla4xxx: Convert to SPDX license identifiersThomas Gleixner
All files in this driver directory contain the following notice: See LICENSE.qla4xxx for copyright and licensing details. LICENSE.qla4xxx can be found in Documentation/scsi/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). - The full GPLv2 license text This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qla4xxx file. Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-24scsi: qla4xxx: Fix an error handling path in 'qla4xxx_get_host_stats()'Christophe JAILLET
Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()'. Link: https://lore.kernel.org/r/20200802101527.676054-1-christophe.jaillet@wanadoo.fr Fixes: 4161cee52df8 ("[SCSI] qla4xxx: Add host statistics support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-24scsi: qla4xxx: Rename function parameter descriptionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_process_vendor_specific' drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Excess function parameter 'job' description in 'qla4xxx_process_vendor_specific' drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_bsg_request' drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Excess function parameter 'job' description in 'qla4xxx_bsg_request' Link: https://lore.kernel.org/r/20200723122446.1329773-18-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Remove set but unused variable 'status'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_83xx.c: In function ‘qla4_83xx_dump_pause_control_regs’: drivers/scsi/qla4xxx/ql4_83xx.c:1409:9: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] 1409 | int i, status = QLA_SUCCESS; | ^~~~~~ Link: https://lore.kernel.org/r/20200723122446.1329773-15-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Supply description for 'code'Lee Jones
Demote other headers which are clearly not kerneldoc. Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_nx.c:983: warning: Function parameter or member 'ha' not described in 'qla4_82xx_pinit_from_rom' drivers/scsi/qla4xxx/ql4_nx.c:983: warning: Function parameter or member 'verbose' not described in 'qla4_82xx_pinit_from_rom' drivers/scsi/qla4xxx/ql4_nx.c:3225: warning: Function parameter or member 'code' not described in 'qla4_8xxx_uevent_emit' drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'ha' not described in 'qla4_82xx_read_optrom_data' drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'buf' not described in 'qla4_82xx_read_optrom_data' drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'offset' not described in 'qla4_82xx_read_optrom_data' drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'length' not described in 'qla4_82xx_read_optrom_data' Link: https://lore.kernel.org/r/20200721164148.2617584-34-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Remove three set but unused variablesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_rddfe’: drivers/scsi/qla4xxx/ql4_nx.c:2648:23: warning: variable ‘data_size’ set but not used [-Wunused-but-set-variable] 2648 | uint32_t poll, mask, data_size, modify_mask; | ^~~~~~~~~ drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_rdmdio’: drivers/scsi/qla4xxx/ql4_nx.c:2745:11: warning: variable ‘poll’ set but not used [-Wunused-but-set-variable] 2745 | uint32_t poll, mask; | ^~~~ drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_pollwr’: drivers/scsi/qla4xxx/ql4_nx.c:2816:47: warning: variable ‘mask’ set but not used [-Wunused-but-set-variable] 2816 | uint32_t addr1, addr2, value1, value2, poll, mask, r_value; | ^~~~ Link: https://lore.kernel.org/r/20200721164148.2617584-33-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Document qla4xxx_process_ddb()'s 'conn_err'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_init.c:1170: warning: Function parameter or member 'conn_err' not described in 'qla4xxx_process_ddb_changed' Link: https://lore.kernel.org/r/20200721164148.2617584-30-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Repair function documentation headersLee Jones
Fix one formatting issue, one misspelling and three missing descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_isr.c:588: warning: Excess function parameter 'ret' description in 'qla4_83xx_loopback_in_progress' drivers/scsi/qla4xxx/ql4_isr.c:661: warning: Function parameter or member 'mbox_status' not described in 'qla4xxx_isr_decode_mailbox' drivers/scsi/qla4xxx/ql4_isr.c:661: warning: Excess function parameter 'mailbox_status' description in 'qla4xxx_isr_decode_mailbox' drivers/scsi/qla4xxx/ql4_isr.c:1053: warning: Function parameter or member 'intr_status' not described in 'qla4_82xx_interrupt_service_routine' drivers/scsi/qla4xxx/ql4_isr.c:1078: warning: Function parameter or member 'intr_status' not described in 'qla4xxx_interrupt_service_routine' Link: https://lore.kernel.org/r/20200721164148.2617584-28-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Fix some kerneldoc parameter documentation issuesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_os.c:4551: warning: Function parameter or member 't' not described in 'qla4xxx_timer' drivers/scsi/qla4xxx/ql4_os.c:4551: warning: Excess function parameter 'ha' description in 'qla4xxx_timer' drivers/scsi/qla4xxx/ql4_os.c:5312: warning: Function parameter or member 'work' not described in 'qla4xxx_do_dpc' drivers/scsi/qla4xxx/ql4_os.c:5312: warning: Excess function parameter 'data' description in 'qla4xxx_do_dpc' drivers/scsi/qla4xxx/ql4_os.c:8627: warning: Function parameter or member 'ent' not described in 'qla4xxx_probe_adapter' drivers/scsi/qla4xxx/ql4_os.c:8627: warning: Excess function parameter 'pci_device_id' description in 'qla4xxx_probe_adapter' drivers/scsi/qla4xxx/ql4_os.c:9008: warning: Function parameter or member 'pdev' not described in 'qla4xxx_remove_adapter' drivers/scsi/qla4xxx/ql4_os.c:9008: warning: Excess function parameter 'pci_dev' description in 'qla4xxx_remove_adapter' drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Function parameter or member 'stgt' not described in 'qla4xxx_eh_wait_for_commands' drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Function parameter or member 'sdev' not described in 'qla4xxx_eh_wait_for_commands' drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Excess function parameter 't' description in 'qla4xxx_eh_wait_for_commands' drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Excess function parameter 'l' description in 'qla4xxx_eh_wait_for_commands' drivers/scsi/qla4xxx/ql4_os.c:9646: warning: Function parameter or member 'pdev' not described in 'qla4xxx_pci_mmio_enabled' Link: https://lore.kernel.org/r/20200721164148.2617584-27-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Fix incorrectly named function parameterLee Jones
Fixes the following W=1 kernel build warning(s): from drivers/scsi/qla4xxx/ql4_iocb.c:8: drivers/scsi/qla4xxx/ql4_iocb.c:87: warning: Function parameter or member 'mrkr_mod' not described in 'qla4xxx_send_marker_iocb' drivers/scsi/qla4xxx/ql4_iocb.c:87: warning: Excess function parameter 'marker_type' description in 'qla4xxx_send_marker_iocb' Link: https://lore.kernel.org/r/20200721164148.2617584-23-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Fix-up incorrectly documented parameterLee Jones
Also demote incomplete header from kerneldoc. Fixes the following W=1 kernel build warning(s): from drivers/scsi/qla4xxx/ql4_mbx.c:9: drivers/scsi/qla4xxx/ql4_mbx.c:53: warning: Excess function parameter 'ret' description in 'qla4xxx_is_intr_poll_mode' drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'fw_ddb_entry_dma' not described in 'qla4xxx_get_fwddb_entry' drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'conn_err_detail' not described in 'qla4xxx_get_fwddb_entry' drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'tcp_source_port_num' not described in 'qla4xxx_get_fwddb_entry' drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'connection_id' not described in 'qla4xxx_get_fwddb_entry' drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Function parameter or member 'ddb_entry' not described in 'qla4xxx_reset_target' drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Excess function parameter 'db_entry' description in 'qla4xxx_reset_target' drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Excess function parameter 'un_entry' description in 'qla4xxx_reset_target' Link: https://lore.kernel.org/r/20200721164148.2617584-22-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Move 'qla4_82xx_reg_tbl' to the only place its usedLee Jones
Fixes the following W=1 kernel build warning(s): In file included from drivers/scsi/qla4xxx/ql4_def.h:43, from drivers/scsi/qla4xxx/ql4_mbx.c:9: drivers/scsi/qla4xxx/ql4_nx.h:602:23: warning: ‘qla4_82xx_reg_tbl’ defined but not used [-Wunused-const-variable=] 602 | static const uint32_t qla4_82xx_reg_tbl[] = { | ^~~~~~~~~~~~~~~~~ [...] NB: Lots of these Link: https://lore.kernel.org/r/20200721164148.2617584-20-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: pm8001: Remove a bunch of set but unused variablesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_eh_cmd_timed_out’: drivers/scsi/qla4xxx/ql4_os.c:1865:24: warning: variable ‘sess’ set but not used [-Wunused-but-set-variable] 1865 | struct iscsi_session *sess; | ^~~~ drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_session_create’: drivers/scsi/qla4xxx/ql4_os.c:3079:19: warning: variable ‘dst_addr’ set but not used [-Wunused-but-set-variable] 3079 | struct sockaddr *dst_addr; | ^~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4_8xxx_iospace_config’: drivers/scsi/qla4xxx/ql4_os.c:5512:44: warning: variable ‘db_len’ set but not used [-Wunused-but-set-variable] 5512 | unsigned long mem_base, mem_len, db_base, db_len; | ^~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5512:35: warning: variable ‘db_base’ set but not used [-Wunused-but-set-variable] 5512 | unsigned long mem_base, mem_len, db_base, db_len; | ^~~~~~~ drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_get_param_ddb’: drivers/scsi/qla4xxx/ql4_os.c:6269:24: warning: variable ‘ha’ set but not used [-Wunused-but-set-variable] 6269 | struct scsi_qla_host *ha; | ^~ Link: https://lore.kernel.org/r/20200721164148.2617584-19-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Move 'qla4_83xx_reg_tbl' from shared headerLee Jones
'qla4_83xx_reg_tbl' is only used in 'drivers/scsi/qla4xxx/ql4_os.c', move it there. Fixes the following W=1 kernel build warning(s): In file included from drivers/scsi/qla4xxx/ql4_def.h:46, from drivers/scsi/qla4xxx/ql4_init.c:9: At top level: drivers/scsi/qla4xxx/ql4_83xx.h:90:23: warning: ‘qla4_83xx_reg_tbl’ defined but not used [-Wunused-const-variable=] 90 | static const uint32_t qla4_83xx_reg_tbl[] = { | ^~~~~~~~~~~~~~~~~ In file included from drivers/scsi/qla4xxx/ql4_def.h:46, from drivers/scsi/qla4xxx/ql4_mbx.c:9: drivers/scsi/qla4xxx/ql4_83xx.h:90:23: warning: ‘qla4_83xx_reg_tbl’ defined but not used [-Wunused-const-variable=] 90 | static const uint32_t qla4_83xx_reg_tbl[] = { | ^~~~~~~~~~~~~~~~~ [...] NB: Lots of these - snipped for brevity. Link: https://lore.kernel.org/r/20200721164148.2617584-15-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Check return value of pci_set_mwi()Lee Jones
pci_set_mwi() has 'warn_unused_result' so the result should be checked. Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’: drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] And if 'status' is removed: drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’: drivers/scsi/qla4xxx/ql4_init.c:666:2: warning: ignoring return value of ‘pci_set_mwi’, declared with attribute warn_unused_result [-Wunused-result] 666 | pci_set_mwi(ha->pdev); | ^~~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20200721164148.2617584-14-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: qla4xxx: Remove set but unused variable 'func_number'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’: drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200721164148.2617584-13-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qla4xxx: Provide a missing function param description and fix formattingLee Jones
Kerneldoc function parameter references need to be in the format '@.*: ', else the kerneldoc checker gets confused. Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’: drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable] drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’: drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] from drivers/scsi/qla4xxx/ql4_init.c:9: from drivers/scsi/qla4xxx/ql4_init.c:9: drivers/scsi/qla4xxx/ql4_init.c:953: warning: Function parameter or member 'is_reset' not described in 'qla4xxx_initialize_adapter' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'ha' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'fw_ddb_index' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'state' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'conn_err' not described in 'qla4xxx_process_ddb_changed' Link: https://lore.kernel.org/r/20200713074645.126138-30-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-24scsi: qla4xxx: Remove unneeded semicolon in ql4_os.cJason Yan
Fix the following coccicheck warning: drivers/scsi/qla4xxx/ql4_os.c:969:3-4: Unneeded semicolon Link: https://lore.kernel.org/r/20200421034038.28113-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: qla4xxx: Adjust indentation in qla4xxx_mem_freeNathan Chancellor
Clang warns: ../drivers/scsi/qla4xxx/ql4_os.c:4148:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (ha->fw_dump) ^ ../drivers/scsi/qla4xxx/ql4_os.c:4144:2: note: previous statement is here if (ha->queues) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 068237c87c64 ("[SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure") Link: https://github.com/ClangBuiltLinux/linux/issues/819 Link: https://lore.kernel.org/r/20191218015252.20890-1-natechancellor@gmail.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: iscsi: qla4xxx: fix double free in probeDan Carpenter
On this error path we call qla4xxx_mem_free() and then the caller also calls qla4xxx_free_adapter() which calls qla4xxx_mem_free(). It leads to a couple double frees: drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed Fixes: afaf5a2d341d ("[SCSI] Initial Commit of qla4xxx") Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountain Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-11-19scsi: qla4xxx: fix double free bugPan Bian
The variable init_fw_cb is released twice, resulting in a double free bug. The call to the function dma_free_coherent() before goto is removed to get rid of potential double free. Fixes: 2a49a78ed3c8 ("[SCSI] qla4xxx: added IPv6 support.") Link: https://lore.kernel.org/r/1572945927-27796-1-git-send-email-bianpan2016@163.com Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-12Merge branch '5.1/scsi-fixes' into 5.2/mergeMartin K. Petersen
We have a few submissions for 5.2 that depend on fixes merged post 5.1-rc1. Merge the fixes branch into queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-25scsi: qla4xxx: fix a potential NULL pointer dereferenceKangjie Lu
In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-25scsi: qla4xxx: avoid freeing unallocated dma memoryArnd Bergmann
Clang -Wuninitialized notices that on is_qla40XX we never allocate any DMA memory in get_fw_boot_info() but attempt to free it anyway: drivers/scsi/qla4xxx/ql4_os.c:5915:7: error: variable 'buf_dma' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (!(val & 0x07)) { ^~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5985:47: note: uninitialized use occurs here dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma); ^~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5915:3: note: remove the 'if' if its condition is always true if (!(val & 0x07)) { ^~~~~~~~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5885:20: note: initialize the variable 'buf_dma' to silence this warning dma_addr_t buf_dma; ^ = 0 Skip the call to dma_free_coherent() here. Fixes: 2a991c215978 ("[SCSI] qla4xxx: Boot from SAN support for open-iscsi") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-01-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A set of 17 fixes. Most of these are minor or trivial. The one fix that may be serious is the isci one: the bug can cause hba parameters to be set from uninitialized memory. I don't think it's exploitable, but you never know" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxgb4i: add wait_for_completion() scsi: qla1280: set 64bit coherent mask scsi: ufs: Fix geometry descriptor size scsi: megaraid_sas: Retry reads of outbound_intr_status reg scsi: qedi: Add ep_state for login completion on un-reachable targets scsi: ufs: Fix system suspend status scsi: qla2xxx: Use correct number of vectors for online CPUs scsi: hisi_sas: Set protection parameters prior to adding SCSI host scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes scsi: isci: initialize shost fully before calling scsi_add_host() scsi: lpfc: lpfc_sli: Mark expected switch fall-throughs scsi: smartpqi_init: fix boolean expression in pqi_device_remove_start scsi: core: Synchronize request queue PM status only on successful resume scsi: pm80xx: reduce indentation scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param scsi: megaraid_sas: correct an info message scsi: target/iscsi: fix error msg typo when create lio_qr_cache failed scsi: sd: Fix cache_type_store()
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 00:47:49 +0000