| Age | Commit message (Collapse) | Author |
|---|
|
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-901207693
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210818164435.99821-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-900263115
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210817154628.84992-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Asus TP200s / E205SA 360 degree hinges 2-in-1 supports reporting
SW_TABLET_MODE info through the ASUS_WMI_DEVID_LID_FLIP WMI device-id.
Add a quirk to enable this.
BugLink: https://gitlab.freedesktop.org/libinput/libinput/-/issues/639
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210812145513.39117-2-hdegoede@redhat.com
|
|
module option
Unfortunately we have been unable to find a reliable way to detect if
and how SW_TABLET_MODE reporting is supported, so we are relying on
DMI quirks for this.
Add a module-option to specify the SW_TABLET_MODE method so that this can
be easily tested without needing to rebuild the kernel.
BugLink: https://gitlab.freedesktop.org/libinput/libinput/-/issues/639
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210812145513.39117-1-hdegoede@redhat.com
|
|
gpio-lookup tables
The gpiod_lookup_table.table passed to gpiod_add_lookup_table() must
be terminated with an empty entry, add this.
Note we have likely been getting away with this not being present because
the GPIO lookup code first matches on the dev_id, causing most lookups to
skip checking the table and the lookups which do check the table will
find a matching entry before reaching the end. With that said, terminating
these tables properly still is obviously the correct thing to do.
Fixes: f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210806115515.12184-1-hdegoede@redhat.com
|
|
360 degree hinges devices with dual KIOX010A + KIOX020A accelerometers
always have both a KIOX010A and a KIOX020A ACPI device (one for each
accel).
Theoretical some vendor may re-use some DSDT for a non-convertible
stripping out just the KIOX020A ACPI device from the DSDT. Check that
both ACPI devices are present to make the check more robust.
Fixes: 153cca9caa81 ("platform/x86: Add and use a dual_accel_detect() helper")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210802141000.978035-1-hdegoede@redhat.com
|
|
Various 360 degree hinges (yoga) style 2-in-1 devices use 2 accelerometers
to allow the OS to determine the angle between the display and the base of
the device.
On Windows these are read by a special HingeAngleService process which
calls undocumented ACPI methods, to let the firmware know if the 2-in-1 is
in tablet- or laptop-mode. The firmware may use this to disable the kbd and
touchpad to avoid spurious input in tablet-mode as well as to report
SW_TABLET_MODE info to the OS.
Since Linux does not call these undocumented methods, the SW_TABLET_MODE
info reported by various pdx86 drivers is incorrect on these devices.
Before this commit the intel-hid and thinkpad_acpi code already had 2
hardcoded checks for ACPI hardware-ids of dual-accel sensors to avoid
reporting broken info.
And now we also have a bug-report about the same problem in the intel-vbtn
code. Since there are at least 3 different ACPI hardware-ids in play, add
a new dual_accel_detect() helper which checks for all 3, rather then
adding different hardware-ids to the drivers as bug-reports trickle in.
Having shared code which checks all known hardware-ids is esp. important
for the intel-hid and intel-vbtn drivers as these are generic drivers
which are used on a lot of devices.
The BOSC0200 hardware-id requires special handling, because often it is
used for a single-accelerometer setup. Only in a few cases it refers to
a dual-accel setup, in which case there will be 2 I2cSerialBus resources
in the device's resource-list, so the helper checks for this.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209011
Reported-and-tested-by: Julius Lehmann <julius@devpi.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210729082134.6683-1-hdegoede@redhat.com
|
|
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-879398883
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210726153630.65213-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Alder Lake has a new ACPI ID for Intel HID event filter device.
Signed-off-by: Ping Bao <ping.a.bao@intel.com>
Link: https://lore.kernel.org/r/20210721225615.20575-1-ping.a.bao@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix 2 possible memleaks on error-exits from tlmi_analyze():
1. If the kzalloc of pwd_power fails, then not only free the atributes,
but also the allocated pwd_admin struct.
2. Freeing the attributes should also free the possible_values strings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210717143607.3580-3-hdegoede@redhat.com
|
|
tlmi_sysfs_init() calls tlmi_release_attr() on errors which calls
kobject_put() for attributes created by tlmi_analyze(), but if we
bail early because of an error, then this means that some of the
kobjects will not have been initialized yet; and we should thus not
call kobject_put() on them.
Switch from using kobject_init_and_add() inside tlmi_sysfs_init() to
initializing all the created kobjects directly in tlmi_analyze() and
only adding them from tlmi_sysfs_init(). This way all kobjects will
always be initialized when tlmi_release_attr() gets called.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210717143607.3580-2-hdegoede@redhat.com
|
|
Move the pending_reboot node under attributes dir where it should live, as
documented in: Documentation/ABI/testing/sysfs-class-firmware-attributes.
Also move the create / remove code to be together with the other code
populating / cleaning the attributes sysfs dir. In the removal path this
is necessary so that the remove is done before the
kset_unregister(tlmi_priv.attribute_kset) call.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210717143607.3580-1-hdegoede@redhat.com
|
|
It was reported that on i386 config
------
on i386:
ld: drivers/platform/x86/amd-pmc.o: in function `s0ix_stats_show':
amd-pmc.c:(.text+0x100): undefined reference to `__udivdi3'
-------
The reason for this is that 64-bit integer division is not supported
on 32-bit architecture. Use do_div macro to fix this.
Fixes: b9a4fa6978be ("platform/x86: amd-pmc: Add support for logging s0ix counters")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org> # and build-tested
Link: https://lore.kernel.org/r/20210716153802.2929670-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the missing unlock before return from function amd_pmc_send_cmd()
in the error handling case.
Fixes: 95e1b60f8dc8 ("platform/x86: amd-pmc: Fix command completion code")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210715074327.1966083-1-yangyingliang@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This driver is no longer specific to HP laptops so "hp" in the error
message is no longer applicable.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Link: https://lore.kernel.org/r/20210710190810.313104-1-alex.hung@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Right now the driver will still return success even if the OS_HINT
command failed to send to the SMU. In the rare event of a failure,
the suspend should really be aborted here so that relevant logs
can may be captured.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20210707141647.8871-1-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The upcoming PMC controller would have a newer acpi id, add that to
the supported acpid device list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210629084803.248498-8-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some newer BIOSes have added another ACPI ID for the uPEP device.
SMU statistics behave identically on this device.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210629084803.248498-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Even the FCH SSC registers provides certain level of information
about the s0ix entry and exit times which comes handy when the SMU
fails to report the statistics via the mailbox communication.
This information is captured via a new debugfs file "s0ix_stats".
A non-zero entry in this counters would mean that the system entered
the s0ix state.
If s0ix entry time and exit time don't change during suspend to idle,
the silicon has not entered the deepest state.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210629084803.248498-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
SMU provides a way to dump the s0ix debug statistics in the form of a
metrics table via a of set special mailbox commands.
Add support to the driver which can send these commands to SMU and expose
the information received via debugfs. The information contains the s0ix
entry/exit, active time of each IP block etc.
As a side note, SMU subsystem logging is not supported on Picasso based
SoC's.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210629084803.248498-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Currently amd_pmc_dump_registers() routine is being called at
multiple places. The best to call it is after command submission
to SMU.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210629084803.248498-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It was lately understood that the current mechanism available in the
driver to get SMU firmware info works only on internal SMU builds and
there is a separate way to get all the SMU logging counters (addressed
in the next patch). Hence remove all the smu info shown via debugfs as it
is no more useful.
Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210629084803.248498-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The protocol to submit a job request to SMU is to wait for
AMD_PMC_REGISTER_RESPONSE to return 1,meaning SMU is ready to take
requests. PMC driver has to make sure that the response code is always
AMD_PMC_RESULT_OK before making any command submissions.
When we submit a message to SMU, we have to wait until it processes
the request. Adding a read_poll_timeout() check as this was missing in
the existing code.
Also, add a mutex to protect amd_pmc_send_cmd() calls to SMU.
Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210629084803.248498-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Think-lmi driver was missing pending_reboot support as it wasn't
available from the BIOS. Turns out this is really useful to have from
user space so implementing from a purely SW point of view.
Thanks to Mario Limonciello for guidance on how fwupd would use this.
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210628222846.8830-1-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core changes from Greg KH:
"Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues"
* tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
docs: ABI: testing: sysfs-firmware-memmap: add some memmap types.
devres: Enable trace events
devres: No need to call remove_nodes() when there none present
devres: Use list_for_each_safe_from() in remove_nodes()
devres: Make locking straight forward in release_nodes()
kernfs: move revalidate to be near lookup
drivers/base: Constify static attribute_group structs
firmware_loader: remove unneeded 'comma' macro
devcoredump: remove contact information
driver core: Drop helper devm_platform_ioremap_resource_wc()
component: Rename 'dev' to 'parent'
component: Drop 'dev' argument to component_match_realloc()
device property: Don't check for NULL twice in the loops
driver core: auxiliary bus: Fix typo in the docs
drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
debugfs: remove return value of debugfs_create_ulong()
debugfs: remove return value of debugfs_create_bool()
scsi: snic: debugfs: remove local storage of debugfs files
b43: don't save dentries for debugfs
b43legacy: don't save dentries for debugfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- patch series that ensures that hid-multitouch driver disables touch
and button-press reporting on hid-mt devices during suspend when the
device is not configured as a wakeup-source, from Hans de Goede
- support for ISH DMA on Intel EHL platform, from Even Xu
- support for Renoir and Cezanne SoCs, Ambient Light Sensor and Human
Presence Detection sensor for amd-sfh driver, from Basavaraj Natikar
- other assorted code cleanups and device-specific fixes/quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (45 commits)
HID: thrustmaster: Switch to kmemdup() when allocate change_request
HID: multitouch: Disable event reporting on suspend when the device is not a wakeup-source
HID: logitech-dj: Implement may_wakeup ll-driver callback
HID: usbhid: Implement may_wakeup ll-driver callback
HID: core: Add hid_hw_may_wakeup() function
HID: input: Add support for Programmable Buttons
HID: wacom: Correct base usage for capacitive ExpressKey status bits
HID: amd_sfh: Add initial support for HPD sensor
HID: amd_sfh: Extend ALS support for newer AMD platform
HID: amd_sfh: Extend driver capabilities for multi-generation support
HID: surface-hid: Fix get-report request
HID: sony: fix freeze when inserting ghlive ps3/wii dongles
HID: usbkbd: Avoid GFP_ATOMIC when GFP_KERNEL is possible
HID: amd_sfh: change in maintainer
HID: intel-ish-hid: ipc: Specify that EHL no cache snooping
HID: intel-ish-hid: ishtp: Add dma_no_cache_snooping() callback
HID: intel-ish-hid: Set ISH driver depends on x86
HID: hid-input: add Surface Go battery quirk
HID: intel-ish-hid: Fix minor typos in comments
HID: usbmouse: Avoid GFP_ATOMIC when GFP_KERNEL is possible
...
|
|
- support for ISH DMA on EHL platform from Even Xu
- various code style fixes and cleanups from Lee Jones and Uwe Kleine-König
|
|
Password is modified
Whenever user has changed an Admin/System Password using the sysfs,
then we are automatically copying the new password to existing
password field.
Co-developed-by: Divya Bharathi <divya.bharathi@dell.com>
Signed-off-by: Divya Bharathi <divya.bharathi@dell.com>
Signed-off-by: Prasanth KSR <prasanth.ksr@dell.com>
Link: https://lore.kernel.org/r/20210628084906.4233-1-prasanth.ksr@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
skl_int3472_handle_gpio_resources()
This function returns negative error codes, zero (to indicate that
everything has been completed successfully) and one (to indicate that
more resources need to be handled still).
This code prints an uninitialized error message when the function
returns one which potentially leads to an Oops.
Fixes: 5de691bffe57 ("platform/x86: Add intel_skl_int3472 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/YNXTkLNtiTDlFlZa@mwanda
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
tlmi_attr_setting_release()
We must not free the possible_values string before we have called
sysfs_remove_group(kobj, &tlmi_attr_group) otherwise there is a race
where a sysfs read of possible_values could reference the free-ed
memory.
Move the kfree(setting->possible_values) together with the free of the
actual tlmi_attr_setting struct to avoid this race.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Currently attributes will show things like:
`BootOrderLock,Disable`
rather than just
`Disable`.
Of course this works, but the attribute is intended to be read by
userspace tools and not require further processing. That is a userspace
tool can display a drop down of `possible_values` and `current_value` is
one of them from the list.
This also aligns `think-lmi` with how `dell-wmi-sysman` works.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210622200755.12379-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On an AMD based Lenovo T14, I find that the module doesn't work at
all, and instead has a traceback with messages like:
```
sysfs: cannot create duplicate filename '/devices/virtual/firmware-attributes/thinklmi/attributes/Reserved'
```
Duplicate and reserved values showing up appear to be a firmware bug,
but they shouldn't make the driver explode. So catch them and skip
them.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210622200755.12379-2-mario.limonciello@amd.com
[hdegoede@redhat.com: Add missing kfree(tlmi_priv.setting[i])]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
string
Commit 0ddcf3a6b442 ("platform/x86: think-lmi: Avoid potential read before
start of the buffer") moved the length == 0 up to before stripping the '\n'
which typically gets added when users echo a value to a sysfs-attribute
from the shell.
This avoids a potential buffer-underrun, but it also causes a behavioral
change, prior to this change "echo > kbdlang", iow writing just a single
'\n' would result in an EINVAL error, but after the change this gets
accepted setting kbdlang to an empty string.
Fix this by replacing the manual '\n' check with using strchrnul() to get
the length till '\n' or terminating 0 in one go; and then do the
length != 0 check after this.
Fixes: 0ddcf3a6b442 ("platform/x86: think-lmi: Avoid potential read before start of the buffer")
Reported-by: Juha Leppänen <juha_efku@dnainternet.net>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210621193648.44138-1-hdegoede@redhat.com
|
|
Since we have started collecting Intel x86 specific drivers in their own
folder, move intel_cht_int33fe to its own subfolder there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Start collecting Intel x86 related drivers in its own subfolder.
Move intel_skl_int3472 first.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
For the sake of APIs to be properly layered provide
skl_int3472_unregister_clock().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210618125516.53510-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
For the sake of APIs to be properly layered provide
skl_int3472_unregister_regulator().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210618125516.53510-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When we call acpi_gpio_get_io_resource(), the output will be
the pointer to the ACPI GPIO resource. Use it directly instead of
dereferencing the generic resource.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210618125516.53510-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Besides the fact that COMMON_CLK selects CLKDEV_LOOKUP, the latter
is going to be removed from clock framework.
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
We may free ACPI device resources immediately after use.
Refactor skl_int3472_parse_crs() accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210618125516.53510-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Linus already once did that for PDx86, don't repeat our mistakes.
TL;DR: 'n' *is* the default 'default'.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There is a problem in mapping CPU to a PCI device instance when the
bus numbers are reused in different packages. This was observed on
some Sapphire Rapids systems.
The current implementation reads bus number assigned to a CPU package
via MSR 0x128. This allows to establish relationship between a CPU
and a PCI device. This allows to update power related parameters to a
MMIO offset in a PCI device space which is unique to a CPU. But if
two packages uses same bus number then this mapping will not be unique.
When bus number is reused, PCI device will use different domain number
or segment number. So we need to be aware of this domain information
while matching CPU to PCI bus number. This domain information is not
available via any MSR. So need to use ACPI numa node information.
There is an interface already available in the Linux to read numa
node for a CPU and a PCI device. This change uses this interface
to check the numa node of a match PCI device with bus number.
If the bus number and numa node matches with the CPU's assigned
bus number and numa node, the matched PCI device instance will be
returned to the caller.
It is possible that before Sapphire Rapids, the numa node is not
defined for the Speed Select PCI device in some OEM systems. In this
case to restore old behavior, return the last matched PCI device
for domain 0 unlsess there are more than one matches.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210616221329.1909276-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It was observed that some of the high performance benchmarks are spending
more time in kernel depending on which CPU package they are executing.
The difference is significant and benchmark scores varies more than 10%.
These benchmarks adjust class of service to improve thread performance
which run in parallel. This class of service change causes access to
MMIO region of Intel Speed Select PCI devices depending on the CPU
package they are executing.
This mapping from CPU to PCI device instance uses a standard Linux PCI
interface "pci_get_domain_bus_and_slot()". This function does a linear
search to get to a PCI device. Since these platforms have 100+ PCI
devices, this search can be expensive in fast path for benchmarks.
Since the device and function of PCI device is fixed for Intel
Speed Select PCI devices, the CPU to PCI device information can be cached
at the same time when bus number for the CPU is read. In this way during
runtime the cached information can be used. This improves performance
of these benchmarks significantly.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210616221329.1909276-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
ACPI devices with _HID INT3472 are currently matched to the tps68470
driver, however this does not cover all situations in which that _HID
occurs. We've encountered three possibilities:
1. On Chrome OS devices, an ACPI device with _HID INT3472 (representing
a physical TPS68470 device) that requires a GPIO and OpRegion driver
2. On devices designed for Windows, an ACPI device with _HID INT3472
(again representing a physical TPS68470 device) which requires GPIO,
Clock and Regulator drivers.
3. On other devices designed for Windows, an ACPI device with _HID
INT3472 which does **not** represent a physical TPS68470, and is instead
used as a dummy device to group some system GPIO lines which are meant
to be consumed by the sensor that is dependent on this entry.
This commit adds a new module, registering a platform driver to deal
with the 3rd scenario plus an i2c driver to deal with #1 and #2, by
querying the CLDB buffer found against INT3472 entries to determine
which is most appropriate.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210603224007.120560-6-djrscally@gmail.com
[hdegoede@redhat.com Make skl_int3472_tps68470_calc_type() static]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
|
|
Signed tag for the immutable platform-drivers-x86-goodix branch for merging into the input subsystem.
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1623811809-65099-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
If length equals 0 then reading buf[length-1] will read before the start
of the buffer.
Avoid this by moving the length == 0 check up.
Cc: Mark Pearson <markpearson@lenovo.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609151752.156902-2-hdegoede@redhat.com
|
|
tlmi_priv.pwd_admin->password is an array (not a pointer), so the correct
way to check for the password being set is to check for
tlmi_priv.pwd_admin->password[0] != 0.
For the second check, replace the check with checking that auth_str is
set instead.
Cc: Mark Pearson <markpearson@lenovo.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505158 ("NO_EFFECT")
Fixes: a7314b3b1d8a ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609151752.156902-1-hdegoede@redhat.com
|
|
The dell-wmi-sysman and think-lmi kernel modules both have a global
struct class *fw_attr_class variable, leading to the following compile
errors when both are builtin:
ld: drivers/platform/x86/think-lmi.o:(.bss+0x0): multiple definition of `fw_attr_class'; drivers/platform/x86/dell/dell-wmi-sysman/sysman.o:(.bss+0x0): first defined here
In both cases the variable is only used in the file where it is declared.
Make both declarations static to avoid the linker error.
Cc: Mark Pearson <markpearson@lenovo.com>
Cc: Dell.Client.Kernel@dell.com
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609145952.113393-1-hdegoede@redhat.com
|
