summaryrefslogtreecommitdiff
path: root/drivers/platform
AgeCommit message (Collapse)Author
2020-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ...
2020-10-23Merge tag 'tag-chrome-platform-for-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
2020-10-14Merge tag 'platform-drivers-x86-v5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Rather calm cycle for x86 platform drivers, all these have been in for-next for a couple of days with no bot complaints. Highlights: - PMC TigerLake fixes and new RocketLake support - various small fixes / updates in other drivers/tools" * tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: MAINTAINERS: update X86 PLATFORM DRIVERS entry with new kernel.org git repo platform/x86: mlx-platform: Add capability field to platform FAN description platform_data/mlxreg: Extend core platform structure platform_data/mlxreg: Update module license platform/x86: mlx-platform: Remove PSU EEPROM configuration MAINTAINERS: Update maintainers for pmc_core driver platform/x86: intel_pmc_core: fix: Replace dev_dbg macro with dev_info() platform/x86: intel_pmc_core: Add Intel RocketLake (RKL) support platform/x86: intel_pmc_core: Clean up: Remove the duplicate comments and reorganize platform/x86: intel_pmc_core: Fix the slp_s0 counter displayed value platform/x86: intel_pmc_core: Fix TigerLake power gating status map platform/x86: pmc_core: Use descriptive names for LPM registers tools/power/x86/intel-speed-select: Update version for v5.10 tools/power/x86/intel-speed-select: Fix missing base-freq core IDs platform/x86: hp-wmi: add support for thermal policy
2020-10-07platform/x86: mlx-platform: Add capability field to platform FAN descriptionVadim Pasternak
Set 'capability' field to FAN core platform data.. The content of 'capability' register allows to set the mapping between the drawers and tachometers. The motivation is to avoid adding a new code in the future in order to distinct between the systems types supporting a different kinds of the FAN drawers. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200923172053.26296-6-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: mlx-platform: Remove PSU EEPROM configurationVadim Pasternak
Remove PSU EEPROM configuration for systems class equipped with Mellanox chip Spectrume-2. Till now all the systems from this class used few types of power units, all equipped with EEPROM device with address space two bytes. Thus, all these devices have been handled by EEPROM driver "24c32". There is a new requirement is to support power unit replacement by "off the shelf" device, matching electrical required parameters. Such device could be equipped with different EEPROM type, which could be one byte address space addressing or even could be not equipped with EEPROM. In such case "24c32" will not work. Fixes: 1bd42d94ccab ("platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200923172053.26296-2-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: intel_pmc_core: fix: Replace dev_dbg macro with dev_info()Gayatri Kammela
dev_dbg macro is used to dump the debug registers in resume from an S0ix failure. However, when CONFIG_DYNAMIC_DEBUG is not set, the user may not be able to find the debug dump on an S0ix failure which defeats the purpose. The output of these messages is already controlled by a module parameter, warn_on_s0ix_failures, making it a 2 step process to enable anyway when CONFIG_DYNAMIC_DEBUG is set. Hence, replace dev_dbg with dev_info, allowing the control of the messages solely through the module parameter which is N by default. Fixes commit 913f984a8347 ("platform/x86: intel_pmc_core: Add an additional parameter to pmc_core_lpm_display()") Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20201007035108.31078-4-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: intel_pmc_core: Add Intel RocketLake (RKL) supportGayatri Kammela
Add RocketLake to the list of the platforms that intel_pmc_core driver supports for pmc_core device. RocketLake reuses all the TigerLake PCH IPs. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David E. Box <david.e.box@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Rui Zhang <rui.zhang@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20201007035108.31078-3-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: intel_pmc_core: Clean up: Remove the duplicate comments and ↵Gayatri Kammela
reorganize Some of the Cannon Lake PCH IPs are reused by most of the platforms such as Ice Lake, Tiger Lake, Elkhart Lake, Jasper Lake and can be reused by future platforms as well. The same was mentioned via comments not once but twice in an array of bit map structs for Cannon Lake (cnp_pfear_map). Hence, remove the duplicate comments and reorganize them. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David E. Box <david.e.box@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Rui Zhang <rui.zhang@intel.com> Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20201007035108.31078-2-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: intel_pmc_core: Fix the slp_s0 counter displayed valueGayatri Kammela
slp_s0 counter value displayed via debugfs interface is calculated by multiplying the granularity for crystal oscillator tick as 100us with the value read from using slp_s0 offset. But the granularity of the tick varies from platform to platform and it needs to be fixed. Hence, specify granularity of the tick for each platform, so that the value of the slp_s0 counter is accurate. Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201006224702.12697-4-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: intel_pmc_core: Fix TigerLake power gating status mapGayatri Kammela
TigerLake's LPM power gating status register has errors in the bit-to-name mapping as well as with the marked reserved bits according to the actual implementation. Hence, update the right bit-to-name mapping and the reserved bits in accordance with actual implementation. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David E. Box <david.e.box@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201006224702.12697-3-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: pmc_core: Use descriptive names for LPM registersDavid E. Box
TigerLake Lower Power Mode (LPM) registers are grouped by functionality but were given simple enumerated names in the code (lpm0, lpm1, ...). Instead, give the register blocks names that describe their usage. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201006224702.12697-2-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: hp-wmi: add support for thermal policyElia Devito
HP Spectre notebooks (and probably other model as well) support up to 4 thermal policy: - HP Recommended - Performance - Cool - Quiet at least on HP Spectre x360 Convertible 15-df0xxx the firmware sets the thermal policy to default but hardcode the odvp0 variable to 1, this causes thermald to choose the wrong DPTF profile witch result in low performance when notebook is on AC, calling thermal policy write command allow firmware to correctly set the odvp0 variable. Signed-off-by: Elia Devito <eliadevito@gmail.com> Link: https://lore.kernel.org/r/20201004211305.11628-1-eliadevito@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-06Merge tag 'platform-drivers-x86-v5.9-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull another x86 platform driver fix from Hans de Goede: "One final pdx86 fix for Tablet Mode reporting regressions (which make the keyboard and touchpad unusable) on various Asus notebooks. These regressions were caused by the asus-nb-wmi and the intel-vbtn drivers both receiving recent patches to start reporting Tablet Mode / to report it on more models. Due to a miscommunication between Andy and me, Andy's earlier pull-req only contained the fix for the intel-vbtn driver and not the fix for the asus-nb-wmi code. This fix has been tested as a downstream patch in Fedora kernels for approx two weeks with no problems being reported" * tag 'platform-drivers-x86-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: asus-wmi: Fix SW_TABLET_MODE always reporting 1 on many different models
2020-10-06platform/x86: asus-wmi: Fix SW_TABLET_MODE always reporting 1 on many ↵Hans de Goede
different models Commit b0dbd97de1f1 ("platform/x86: asus-wmi: Add support for SW_TABLET_MODE") added support for reporting SW_TABLET_MODE using the Asus 0x00120063 WMI-device-id to see if various transformer models were docked into their keyboard-dock (SW_TABLET_MODE=0) or if they were being used as a tablet. The new SW_TABLET_MODE support (naively?) assumed that non Transformer devices would either not support the 0x00120063 WMI-device-id at all, or would NOT set ASUS_WMI_DSTS_PRESENCE_BIT in their reply when querying the device-id. Unfortunately this is not true and we have received many bug reports about this change causing the asus-wmi driver to always report SW_TABLET_MODE=1 on non Transformer devices. This causes libinput to think that these are 360 degree hinges style 2-in-1s folded into tablet-mode. Making libinput suppress keyboard and touchpad events from the builtin keyboard and touchpad. So effectively this causes the keyboard and touchpad to not work on many non Transformer Asus models. This commit fixes this by using the existing DMI based quirk mechanism in asus-nb-wmi.c to allow using the 0x00120063 device-id for reporting SW_TABLET_MODE on Transformer models and ignoring it on all other models. Fixes: b0dbd97de1f1 ("platform/x86: asus-wmi: Add support for SW_TABLET_MODE") Link: https://patchwork.kernel.org/patch/11780901/ BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209011 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1876997 Reported-by: Samuel Čavoj <samuel@cavoj.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-05Merge tag 'platform-drivers-x86-v5.9-2' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: "We have some fixes for Tablet Mode reporting in particular, that users are complaining a lot about. Summary: - Attempt #3 of enabling Tablet Mode reporting w/o regressions - Improve battery recognition code in ASUS WMI driver - Fix Kconfig dependency warning for Fujitsu and LG laptop drivers - Add fixes in Thinkpad ACPI driver for _BCL method and NVRAM polling - Fix power supply extended topology in Mellanox driver - Fix memory leak in OLPC EC driver - Avoid static struct device in Intel PMC core driver - Add support for the touchscreen found in MPMAN Converter9 2-in-1 - Update MAINTAINERS to reflect the real state of affairs" * tag 'platform-drivers-x86-v5.9-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse MAINTAINERS: Add Mark Gross and Hans de Goede as x86 platform drivers maintainers platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360" platform/x86: intel_pmc_core: do not create a static struct device platform/x86: mlx-platform: Fix extended topology configuration for power supply units platform/x86: pcengines-apuv2: Fix typo on define of AMD_FCH_GPIO_REG_GPIO55_DEVSLP0 platform/x86: fix kconfig dependency warning for FUJITSU_LAPTOP platform/x86: fix kconfig dependency warning for LG_LAPTOP platform/x86: thinkpad_acpi: initialize tp_nvram_state variable platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360 platform/x86: asus-wmi: Add BATC battery name to the list of supported platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA" platform/x86: touchscreen_dmi: Add info for the MPMAN Converter9 2-in-1 Documentation: laptops: thinkpad-acpi: fix underline length build warning Platform: OLPC: Fix memleak in olpc_ec_probe
2020-10-05platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuseAaron Ma
Evaluating ACPI _BCL could fail, then ACPI buffer size will be set to 0. When reuse this ACPI buffer, AE_BUFFER_OVERFLOW will be triggered. Re-initialize buffer size will make ACPI evaluate successfully. Fixes: 46445b6b896fd ("thinkpad-acpi: fix handle locate for video and query of _BCL") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-10-02platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reportingHans de Goede
2 recent commits: cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type") 1fac39fd0316 ("platform/x86: intel-vbtn: Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types") Enabled reporting of SW_TABLET_MODE on more devices since the vbtn ACPI interface is used by the firmware on some of those devices to report this. Testing has shown that unconditionally enabling SW_TABLET_MODE reporting on all devices with a chassis type of 8 ("Portable") or 10 ("Notebook") which support the VGBS method is a very bad idea. Many of these devices are normal laptops (non 2-in-1) models with a VGBS which always returns 0, which we translate to SW_TABLET_MODE=1. This in turn causes userspace (libinput) to suppress events from the builtin keyboard and touchpad, making the laptop essentially unusable. Since the problem of wrongly reporting SW_TABLET_MODE=1 in combination with libinput, leads to a non-usable system. Where as OTOH many people will not even notice when SW_TABLET_MODE is not being reported, this commit changes intel_vbtn_has_switches() to use a DMI based allow-list. The new DMI based allow-list matches on the 31 ("Convertible") and 32 ("Detachable") chassis-types, as these clearly are 2-in-1s and so far if they support the intel-vbtn ACPI interface they all have properly working SW_TABLET_MODE reporting. Besides these 2 generic matches, it also contains model specific matches for 2-in-1 models which use a different chassis-type and which are known to have properly working SW_TABLET_MODE reporting. This has been tested on the following 2-in-1 devices: Dell Venue 11 Pro 7130 vPro HP Pavilion X2 10-p002nd HP Stream x360 Convertible PC 11 Medion E1239T Fixes: cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type") BugLink: https://forum.manjaro.org/t/keyboard-and-touchpad-only-work-on-kernel-5-6/22668 BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175599 Cc: Barnabás Pőcze <pobrn@protonmail.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-10-02platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on ↵Andy Shevchenko
the HP Pavilion 11 x360" After discussion, see the Link tag, it appears that this is not good enough. So, revert it now and apply a better fix. This reverts commit d823346876a970522ff9e4d2b323c9b734dcc4de. Link: https://lore.kernel.org/platform-driver-x86/s5hft71klxl.wl-tiwai@suse.de/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-29platform/chrome: Use kobj_to_dev() instead of container_of()Wang Qing
Use kobj_to_dev() instead of container_of(). Signed-off-by: Wang Qing <wangqing@vivo.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-09-24platform/x86: intel_pmc_core: do not create a static struct deviceGreg Kroah-Hartman
A struct device is a dynamic structure, with reference counting. "Tricking" the kernel to make a dynamic structure static, by working around the driver core release detection logic, is not nice. Because of this, this code has been used as an example for others on "how to do things", which is just about the worst thing possible to have happen. Fix this all up by making the platform device dynamic and providing a real release function. Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Cc: Vishwanath Somayaji <vishwanath.somayaji@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Rajat Jain <rajatja@google.com> Cc: platform-driver-x86@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-by: Maximilian Luz <luzmaximilian@gmail.com> Fixes: b02f6a2ef0a1 ("platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rajat Jain <rajatja@google.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: mlx-platform: Fix extended topology configuration for power ↵Vadim Pasternak
supply units Fix topology configuration for power supply units in structure 'mlxplat_mlxcpld_ext_pwr_items_data', due to hardware change. Note: no need to backport the fix, since there is no such hardware yet (equipped with four power) at the filed. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: pcengines-apuv2: Fix typo on define of ↵Ed Wildgoose
AMD_FCH_GPIO_REG_GPIO55_DEVSLP0 Schematics show that the GPIO number is 55 (not 59). Trivial typo. Signed-off-by: Ed Wildgoose <lists@wildgooses.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: fix kconfig dependency warning for FUJITSU_LAPTOPNecip Fazil Yildiran
When FUJITSU_LAPTOP is enabled and NEW_LEDS is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for LEDS_CLASS Depends on [n]: NEW_LEDS [=n] Selected by [y]: - FUJITSU_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] || ACPI_VIDEO [=n]=n) The reason is that FUJITSU_LAPTOP selects LEDS_CLASS without depending on or selecting NEW_LEDS while LEDS_CLASS is subordinate to NEW_LEDS. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Reported-by: Hans de Goede <hdegoede@redhat.com> Fixes: d89bcc83e709 ("platform/x86: fujitsu-laptop: select LEDS_CLASS") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: fix kconfig dependency warning for LG_LAPTOPNecip Fazil Yildiran
When LG_LAPTOP is enabled and NEW_LEDS is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for LEDS_CLASS Depends on [n]: NEW_LEDS [=n] Selected by [y]: - LG_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && ACPI_WMI [=y] && INPUT [=y] The reason is that LG_LAPTOP selects LEDS_CLASS without depending on or selecting NEW_LEDS while LEDS_CLASS is subordinate to NEW_LEDS. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: dbf0c5a6b1f8 ("platform/x86: Add LG Gram laptop special features driver") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: mark gross <mgross@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: thinkpad_acpi: initialize tp_nvram_state variableTom Rix
clang static analysis flags this represenative problem thinkpad_acpi.c:2523:7: warning: Branch condition evaluates to a garbage value if (!oldn->mute || ^~~~~~~~~~~ In hotkey_kthread() mute is conditionally set by hotkey_read_nvram() but unconditionally checked by hotkey_compare_and_issue_event(). So the tp_nvram_state variable s[2] needs to be initialized. Fixes: 01e88f25985d ("ACPI: thinkpad-acpi: add CMOS NVRAM polling for hot keys (v9)") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: mark gross <mgross@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on the HP ↵Hans de Goede
Pavilion 11 x360 Commit cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type") restored SW_TABLET_MODE reporting on the HP stream x360 11 series on which it was previously broken by commit de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's"). It turns out that enabling SW_TABLET_MODE reporting on devices with a chassis-type of 10 ("Notebook") causes SW_TABLET_MODE to always report 1 at boot on the HP Pavilion 11 x360, which causes libinput to disable the kbd and touchpad. The HP Pavilion 11 x360's ACPI VGBS method sets bit 4 instead of bit 6 when NOT in tablet mode at boot. Inspecting all the DSDTs in my DSDT collection shows only one other model, the Medion E1239T ever setting bit 4 and it always sets this together with bit 6. So lets treat bit 4 as a second bit which when set indicates the device not being in tablet-mode, as we already do for bit 6. While at it also prefix all VGBS constant defines with "VGBS_". Fixes: cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: asus-wmi: Add BATC battery name to the list of supportedMarius Iacob
The Intel Atom Cherry Trail platform reports a new battery name (BATC). Tested on ASUS Transformer Mini T103HAF. Signed-off-by: Marius Iacob <themariusus@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA"Hans de Goede
The WMI INIT method on for some reason turns on the camera LED on these 2-in-1s, without the WMI interface allowing further control over the LED. To fix this commit b5f7311d3a2e ("platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA") added a blacklist with these 2 models on it since the WMI driver did not add any extra functionality to these models. Recently I've been working on making more 2-in-1 models report their tablet-mode (SW_TABLET_MODE) to userspace; and I've found that these 2 Asus models report this through WMI. This commit reverts the adding of the blacklist, so that the Asus WMI driver can be used on these models to report their tablet-mode. I have another patch fixing the LED issue in a different manner. Note this is the second time the we revert the adding of the asus_nb_wmi_blacklist. It was reverted before in commit: aab9e7896ec9 ("platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA")" But some how (accidentally re-applying of the patch?) it got re-added again in commit 3bd12da7f50b ("platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA"), so now we need to revert it again. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: touchscreen_dmi: Add info for the MPMAN Converter9 2-in-1Hans de Goede
Add touchscreen info for the MPMAN Converter9 2-in-1. This device uses the same case as the ITworks TW891, but it uses a different digitizer, so it needs its own firmware. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24Platform: OLPC: Fix memleak in olpc_ec_probeDinghao Liu
When devm_regulator_register() fails, ec should be freed just like when olpc_ec_cmd() fails. Fixes: 231c0c216172a ("Platform: OLPC: Add a regulator for the DCON") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-21platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer()Prashant Malani
Since cros_ec_cmd_xfer_status() now returns Linux error codes and all other files use that command, remove the now-unused function cros_ec_cmd_xfer(). Signed-off-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-09-21platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sitesPrashant Malani
Since all the other call-sites of cros_ec_cmd_xfer() have been converted to use cros_ec_cmd_xfer_status() instead, update the remaining call-sites to prepare for the merge of cros_ec_cmd_xfer() into cros_ec_cmd_xfer_status(). As part of this update, change the error handling inside cros_ec_get_sensor_count() such that the legacy LPC interface is tried on all error values, not just when msg->result != EC_RESULT_SUCCESS. Note that there is a slight change in API in cros_ec_get_sensor_count(): it will return a negative number of sensors when there are no sensors on arm platform when MOTIONSENSE_CMD_DUMP is not supported (typical for sensorless chromebook) instead of 0. However, this is not a problem when probing the EC as we ignore errors only looking for cros_ec_get_sensor_count() returning a positive number of sensors. Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-09-08platform/x86: thinkpad_acpi: Map Clipping tool hotkey to ↵Hans de Goede
KEY_SELECTIVE_SCREENSHOT Commit 696c6523ec8f ("platform/x86: thinkpad_acpi: add mapping for new hotkeys") added support for a bunch of new hotkeys, but the clipping/snipping tool hotkey got ignored because there was no good key-code to map it to. Recently a new KEY_SELECTIVE_SCREENSHOT keycode was added by commit 3b059da9835c ("Input: allocate keycode for "Selective Screenshot" key") quoting from the commit message: "New Chrome OS keyboards have a "snip" key that is basically a selective screenshot (allows a user to select an area of screen to be copied). Allocate a keycode for it." Support for this "snip" key seems like it is also a good match for the clipping/snipping tool hotkey, so map this hotkey to the new KEY_SELECTIVE_SCREENSHOT key-code. Reviewed-by: Bastien Nocera <hadess@hadess.net> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200908135147.4044-5-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-08platform/x86: thinkpad_acpi: Add support for new hotkeys found on X1C8 / T14Hans de Goede
New Lenovo Thinkpad models, e.g. the X1 Carbon 8th gen and the new T14 gen1 models have 3 new symbols / shortcuts on their F9-F11 keys (and the thinkpad_acpi driver receives 3 new hkey events for these): F9: Has a symbol resembling a rectangular speech balloon, the manual says the hotkey functions shows or hides the notification center F10: Has a symbol of a telephone horn which has been picked up from the receiver, the manual says: "Answer incoming calls" F11: Has a symbol of a telephone horn which is resting on the receiver, the manual says: "Decline incoming calls" And these Thinkpad models also send a new 0x1316 hkey events when the Fn + right Shift key-combo is pressed. This commit adds support for these 4 new hkey events. Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200908135147.4044-4-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-04platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC configEnric Balletbo i Serra
The MFD_CROS_EC config was a transitional Kconfig option to not break current defconfigs in the kernel. Now, this is not required anymore because all the defconfigs have been removed this option and migrated to enable the CrOS EC parts individually. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org>
2020-09-04platform/chrome: cros_ec_lightbar: Reduce ligthbar get version commandGwendal Grignou
By default, the lightbar commands are set to the biggest lightbar command and response. That length is greater than 128 bytes and may not work on all machines. But all EC are probed for lightbar by sending a get version request. Set that request size precisely. Before the command would be: cros_ec_cmd: version: 0, command: EC_CMD_LIGHTBAR_CMD, outsize: 194, insize: 128, result: 0 Afer: cros_ec_cmd: version: 0, command: EC_CMD_LIGHTBAR_CMD, outsize: 1, insize: 8, result: 0 Fixes: a841178445bb7 ("mfd: cros_ec: Use a zero-length array for command data") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-31platform/chrome: cros_ec_trace: Add fields to command tracesGwendal Grignou
In ftrace, add more fields to the cros_ec command event: - Add size of commands to check if they are properly set. - Add offset (in case an EC is cascaded being another EC), to allow proper command output With: echo 1 > events/cros_ec/cros_ec_cmd/enable We now have (on samus) Invalid command for the sensor stack: ectool-6942 [002] .... 3082.783116: cros_ec_request_done: version: 3, offset: 0, command: EC_CMD_MOTION_SENSE_CMD, outsize: 2, insize: 19, ec result: EC_RES_INVALID_PARAM, retval: 0 Powerd accessing PD EC being the main EC: powerd-1272 [002] .... 40.644026: cros_ec_request_done: version: 0, offset: 1, command: EC_CMD_USB_PD_POWER_INFO, outsize: 1, insize: 16, ec result: EC_RES_SUCCESS, retval: 16 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-24platform/chrome: cros_ec_typec: Re-order connector configuration stepsAzhar Shaikh
As per USB Type-C Spec R2.0 section 4.5.1.2 (Connecting Sources and Sinks) and section 4.5.2.2 (Connection State Machine Requirements), the typical flow for configuring a device connected to a typeC port is as below: 1. Source/sink detection 2. Orientation 3. Data role 4. VCONN 5. VBUS (USB Type-C currents) 6. The connector is now configured. We can start the PD communication that should lead into configuration of the mux if we enter a mode. But in existing code data role was set after the connector and mux are already configured. So fix this by following the spec to set the data role before the connector and mux are configured. Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Reviewed-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-24platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnectAzhar Shaikh
On disconnect port partner is removed and usb role is set to NONE. But then in cros_typec_port_update() the role is set again. Avoid this by moving usb_role_switch_set_role() to cros_typec_configure_mux(). Suggested-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-24platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()Azhar Shaikh
usb_role_switch_set_role() has the second argument as enum for usb_role. Currently depending upon the data role i.e. UFP(0) or DFP(1) is sent. This eventually translates to USB_ROLE_NONE in case of UFP and USB_ROLE_DEVICE in case of DFP. Correct this by sending correct enum values as USB_ROLE_DEVICE in case of UFP and USB_ROLE_HOST in case of DFP. Fixes: 7e7def15fa4b ("platform/chrome: cros_ec_typec: Add USB mux control") Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Cc: Prashant Malani <pmalani@chromium.org> Reviewed-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-24platform/chrome: cros_ec_typec: USB4 supportHeikki Krogerus
With USB4 mode the mux driver needs the Enter_USB Data Object (EUDO) that was used when the USB mode was entered. Though the object is not available in the driver, it is possible to construct it from the information we have. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-24platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codesGuenter Roeck
The EC reports a variety of error codes. Most of those, with the exception of EC_RES_INVALID_VERSION, are converted to -EPROTO. As result, the actual EC error code gets lost. Introduce cros_ec_map_error() to map EC error codes to Linux error codes, and use it in cros_ec_cmd_xfer_status() to report more meaningful errors to the caller. With this change, callers of cros_ec_cmd_xfer_status() can implement a more distinguished action without having to rely on the EC error code. At the same time, debugging is improved in situations where the Linux error code is reported to userspace and/or in the kernel log. Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org> Cc: Prashant Malani <pmalani@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-24platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPTGuenter Roeck
-ENOTSUPP is not a SUSV4 error code and should not be used. Use -ENOPROTOOPT instead to report EC_RES_INVALID_VERSION responses from the EC. This matches match the NFS response for unsupported protocol versions. Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org> Cc: Prashant Malani <pmalani@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-24platform/chrome: cros_ec_sysfs: Report range of error codes from ECGuenter Roeck
Since commit c5cd2b47b203 ("platform/chrome: cros_ec_proto: Report command not supported") we can no longer assume that cros_ec_cmd_xfer_status() reports -EPROTO for all errors returned by the EC itself. A follow-up patch will change cros_ec_cmd_xfer_status() to report additional errors reported by the EC as distinguished Linux error codes. Prepare for this change by always reporting both the Linux error code and the EC error code in sysfs attributes. Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org> Cc: Prashant Malani <pmalani@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-24cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_statusGuenter Roeck
Since commit c5cd2b47b203 ("platform/chrome: cros_ec_proto: Report command not supported") we can no longer assume that cros_ec_cmd_xfer_status() reports -EPROTO for all errors returned by the EC itself. A follow-up patch will change cros_ec_cmd_xfer_status() to report additional errors reported by the EC as distinguished Linux error codes. Handle this change by no longer assuming that -EPROTO is used to report all errors returned by the EC itself. Since errors reported by the EC are already reported in text form through sysfs attributes, extend this form of error reporting to all errors reported by cros_ec_cmd_xfer_status(). Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org> Cc: Prashant Malani <pmalani@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-12Merge tag 'linux-watchdog-5.9-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - f71808e_wdt imporvements - dw_wdt improvements - mlx-wdt: support new watchdog type with longer timeout period - fallthrough pseudo-keyword replacements - overall small fixes and improvements * tag 'linux-watchdog-5.9-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits) watchdog: rti-wdt: balance pm runtime enable calls watchdog: rti-wdt: attach to running watchdog during probe watchdog: add support for adjusting last known HW keepalive time watchdog: use __watchdog_ping in startup watchdog: softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot' watchdog: pcwd_usb: remove needless check before usb_free_coherent() watchdog: Replace HTTP links with HTTPS ones dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support watchdog: initialize device before misc_register watchdog: booke_wdt: Add common nowayout parameter driver watchdog: scx200_wdt: Use fallthrough pseudo-keyword watchdog: Use fallthrough pseudo-keyword watchdog: f71808e_wdt: do stricter parameter validation watchdog: f71808e_wdt: clear watchdog timeout occurred flag watchdog: f71808e_wdt: remove use of wrong watchdog_info option watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options docs: watchdog: codify ident.options as superset of possible status flags dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150 dt-bindings: watchdog: Convert QCOM watchdog timer bindings to YAML watchdog: dw_wdt: Add DebugFS files ...
2020-08-11Merge tag 'tag-chrome-platform-for-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - Add support for switch control and alternate modes to the Chrome EC Type C port driver - Add basic suspend/resume support sensorhub: - Fix timestamp overflow issue - Fix legacy timestamp spreading on Nami systems cros_ec_proto: - After removing all users of, stop exporting cros_ec_cmd_xfer - Check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK and ignore wakeups on old ECs misc: - Documentation warning cleanup - Fix double unlock issue in ishtp" * tag 'tag-chrome-platform-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (21 commits) platform/chrome: cros_ec_proto: check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs platform/chrome: cros_ec_sensorhub: Simplify legacy timestamp spreading platform/chrome: cros_ec_proto: Do not export cros_ec_cmd_xfer() platform/chrome: cros_ec_typec: Unregister partner on error platform/chrome: cros_ec_sensorhub: Fix EC timestamp overflow platform/chrome: cros_ec_typec: Add PM support platform/chrome: cros_ec_typec: Use workqueue for port update platform/chrome: cros_ec_typec: Add a dependency on USB_ROLE_SWITCH platform/chrome: cros_ec_ishtp: Fix a double-unlock issue platform/chrome: cros_ec_rpmsg: Document missing struct parameters platform/chrome: cros_ec_spi: Document missing function parameters platform/chrome: cros_ec_typec: Add TBT compat support platform/chrome: cros_ec: Add TBT pd_ctrl fields platform/chrome: cros_ec_typec: Make configure_mux static platform/chrome: cros_ec_typec: Support DP alt mode platform/chrome: cros_ec_typec: Add USB mux control platform/chrome: cros_ec_typec: Register PD CTRL cmd v2 platform/chrome: cros_ec: Update mux state bits platform/chrome: cros_ec_typec: Register Type C switches ...
2020-08-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - IRQ bypass support for vdpa and IFC - MLX5 vdpa driver - Endianness fixes for virtio drivers - Misc other fixes * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (71 commits) vdpa/mlx5: fix up endian-ness for mtu vdpa: Fix pointer math bug in vdpasim_get_config() vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config() vdpa/mlx5: fix memory allocation failure checks vdpa/mlx5: Fix uninitialised variable in core/mr.c vdpa_sim: init iommu lock virtio_config: fix up warnings on parisc vdpa/mlx5: Add VDPA driver for supported mlx5 devices vdpa/mlx5: Add shared memory registration code vdpa/mlx5: Add support library for mlx5 VDPA implementation vdpa/mlx5: Add hardware descriptive header file vdpa: Modify get_vq_state() to return error code net/vdpa: Use struct for set/get vq state vdpa: remove hard coded virtq num vdpasim: support batch updating vhost-vdpa: support IOTLB batching hints vhost-vdpa: support get/set backend features vhost: generialize backend features setting/getting vhost-vdpa: refine ioctl pre-processing vDPA: dont change vq irq after DRIVER_OK ...
2020-08-06Merge tag 'thermal-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add support to enable/disable the thermal zones resulting on core code and drivers cleanup (Andrzej Pietrasiewicz) - Add generic netlink support for userspace notifications: events, temperature and discovery commands (Daniel Lezcano) - Fix redundant initialization for a ret variable (Colin Ian King) - Remove the clock cooling code as it is used nowhere (Amit Kucheria) - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu) - Replace all references to thermal.txt in the documentation to the corresponding yaml files (Amit Kucheria) - Add maintainer entry for the IPA (Lukasz Luba) - Add support for MSM8939 for the tsens (Shawn Guo) - Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba) - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar) - Add tsensor support for V2 mediatek thermal system (Henry Yen) - Fix thermal zone lookup by ID for the core code (Thierry Reding) * tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits) thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support thermal: mediatek: Add tsensor support for V2 thermal system thermal: mediatek: Prepare to add support for other platforms thermal: Update power allocator and devfreq cooling to SPDX licensing MAINTAINERS: update entry to thermal governors file name prefixing thermal: core: Add thermal zone enable/disable notification thermal: qcom: tsens-v0_1: Add support for MSM8939 dt-bindings: tsens: qcom: Document MSM8939 compatible thermal: core: Fix thermal zone lookup by ID thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id thermal: imx8mm: Support module autoloading thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() MAINTAINERS: Add maintenance information for IPA thermal: rcar_gen3_thermal: Do not shadow thcode variable dt-bindings: thermal: Get rid of thermal.txt and replace references thermal: core: Move initialization after core initcall thermal: netlink: Improve the initcall ordering net: genetlink: Move initialization to core_initcall thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/clock_cooling: Remove clock_cooling code ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 15:52:02 +0000