summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k/core.h
AgeCommit message (Collapse)Author
2021-06-12ath11k: add support for WCN6855Baochen Qiang
This patch is to add support for WCN6855. For station mode, WCN6855 is able to connect to an AP, and ping works well. For AP mode, hostapd is able to bringup an SAP interface with WCN6855, a normal station can connect to this AP and ping works well. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511162214.29475-7-jouni@codeaurora.org
2021-05-24ath10k/ath11k: fix spelling mistake "requed" -> "requeued"Colin Ian King
There are multiple occurrances of the misspelling of requeued in the drivers with symbol names and debug text. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210423134133.339751-1-colin.king@canonical.com
2021-03-09ath11k: Add support for STA to handle beacon missLavanya Suresh
When AP goes down without any indication to STA, firmware detects missing beacon, and sends wmi roam event with reason BEACON_MISS to the host. Added support for STA mode to trigger disassociation from AP, on receiving this event from firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01717-QCAHKSWPL_SILICONZ-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1614340859-28867-1-git-send-email-lavaks@codeaurora.org
2021-02-17ath11k: add CE interrupt support for QCN9074Karthikeyan Periyasamy
Define host CE configuration for QCN9074 since the max CE count is six. Available MSI interrupt is five so cannot able to map the ce_id directly for the msi_data_idx. Added get_ce_msi_idx ops in ath11k_hif_ops to get the CE MSI idx which is used to initialize the CE ring. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-10-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add static window support for register accessKarthikeyan Periyasamy
Three window slots can be configure. First window slot dedicate for dynamic selection and remaining two slots dedicate for static selection. To optimise the window selection, frequent registers (UMAC, CE) are configure in static window slot. so that we minimise the window selection. Other registers are configure in dynamic window slot. Get the window start address from the respective offset and access the read/write register. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-7-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: Add qcn9074 mhi controller configAnilkumar Kolli
Add MHI config for QCN9074 also populate ath11k_hw_params for QCN9074. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-6-git-send-email-akolli@codeaurora.org
2021-02-09ath11k: Update tx descriptor search index properlyKarthikeyan Periyasamy
Tx descriptor search index field should be updated with hw peer id and not by AST Hash as per the HW/FW recommendation. Incorrect search index causes throughput degradation in all scenario for all the platforms. so updated the search index field with hw peer id, which is a common change applicable for all the platforms. Also no need of these configuration for non station type. seen 10% throughput increase in WDS traffic with this change. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612410960-9120-1-git-send-email-periyasa@codeaurora.org
2021-01-18ath11k: remove duplicate function declarationKarthikeyan Periyasamy
Removed the duplicated peer related function declaration from core.h since those functions are already declared in peer.h Founded in code review. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608304793-20612-1-git-send-email-periyasa@codeaurora.org
2020-12-12ath11k: implement suspend for QCA6390 PCI devicesCarl Huang
Now that all the needed pieces are in place implement suspend support QCA6390 PCI devices. All other devices will return -EOPNOTSUPP during suspend. The suspend is implemented by switching the firmware to WoW mode during suspend, so the firmware will be running on low power mode while host is in suspend. At the moment we are not able to shutdown and fully power off the device due to bugs in MHI subsystem, so WoW mode is a workaround for the time being. During suspend we enable WoW mode, disable CE irq and DP irq, then put MHI to suspend state. During resume, driver resumes MHI firstly, then enables CE irq and dp IRQ, and sends WoW wakeup command to firmware. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-11-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: implement WoW enable and wakeup commandsCarl Huang
Implement wow enable ane wow wakeup commands which are needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-9-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: htc: implement suspend handlingCarl Huang
When ath11k sends suspend command to firmware, firmware will return suspend_complete events and add handlers for those. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-6-git-send-email-kvalo@codeaurora.org
2020-12-09ath11k: fix rmmod failure if qmi sequence failsAnilkumar Kolli
QMI sequence fails if caldata file is not available. It is observed that 'rmmod ath11k' fails if qmi message fails. With this patch rmmod/insmod is working. Logs: Direct firmware load for IPQ8074/caldata.bin failed with error -2 Falling back to user helper qmi failed to load CAL: IPQ8074/caldata.bin qmi failed to load board data file:-11 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01699-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606916215-24643-1-git-send-email-akolli@codeaurora.org
2020-12-02ath11k: Build check size of ath11k_skb_cbSven Eckelmann
It is rather easy to add more entries to ath11k_skb_cb while forgetting the size limit of ieee80211_tx_info->driver_data. So just check this during the build to reduce the change of accidental buffer overflow in the skbuff->cb. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201119154235.263250-3-sven@narfation.org
2020-12-02ath11k: Don't cast ath11k_skb_cb to ieee80211_tx_info.controlSven Eckelmann
The driver_data area of ieee80211_tx_info is used in ath11k for ath11k_skb_cb. The first function in the TX patch which rewrites it to ath11k_skb_cb is already ath11k_mac_op_tx. No one else in the code path must use it for something else before it reinitializes it. Otherwise the data has to be considered uninitialized or corrupt. But the ieee80211_tx_info.control shares exactly the same area as ieee80211_tx_info.driver_data and ath11k is still using it. This results in best case in a ath11k c000000.wifi1: no vif found for mgmt frame, flags 0x0 or (slightly worse) in a kernel oops. Instead, the interesting data must be moved first into the ath11k_skb_cb and ieee80211_tx_info.control must then not be used anymore. Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201119154235.263250-1-sven@narfation.org
2020-11-24ath11k: remove "ath11k_mac_get_ar_vdev_stop_status" referencesRitesh Singh
Unused structure ath11k_vdev_stop_status is removed. 'ath11k_mac_get_ar_vdev_stop_status' api has been replaced with 'ath11k_mac_get_ar_by_vdev_id' inside vdev_stopped_event. Signed-off-by: Ritesh Singh <ritesi@codeaurora.org> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605514143-17652-4-git-send-email-mkenna@codeaurora.org
2020-11-24ath11k: peer delete synchronization with firmwareRitesh Singh
Peer creation in firmware fails, if last peer deletion is still in progress. Hence, add wait for the event after deleting every peer from host driver to synchronize with firmware. Signed-off-by: Ritesh Singh <ritesi@codeaurora.org> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605514143-17652-3-git-send-email-mkenna@codeaurora.org
2020-11-24ath11k: vdev delete synchronization with firmwareRitesh Singh
When the interface is added immediately after removing the interface, vdev deletion in firmware might not have been completed. Hence, add vdev_delete_resp_event and wait_event_timeout to synchronize with firmware. Signed-off-by: Ritesh Singh <ritesi@codeaurora.org> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605514143-17652-2-git-send-email-mkenna@codeaurora.org
2020-11-23ath11k: add processor_id based ring_selector logicP Praneesh
Current ring selector logic follows round-robin scheduling, when a process switch from one processor to another each time, the data in the cache would have to be invalidated and re-loaded from RAM leads to poor cache utilization. Therefore smp_processor_id() attempt to keep processes on the same processor via processor affinity which improves cache utilization. Also, ring selection could be chosen round robin when the processor_id based ring selection does not have the resources. Tested-on : IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00874-QCAHKSWPL_SILICONZ-1 Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604914915-12831-1-git-send-email-ppranees@codeaurora.org
2020-11-07ath11k: cold boot calibration supportGovindaraj Saminathan
cold boot calibration is the process to calibrate all the channels during the boot-up to avoid the calibration delay during the channel change. During the boot-up, firmware started in cold boot calibration mode Firmware calibrate all channels and generate CalDb(DDR). Subsequent wifi bringup will reuse the same CalDb. Firmware is restarted in normal mode to continue the normal operation. caldb memory address send to firmware through the QMI message.Firmware use this address to store the caldb data and use it until next reboot. This will give the improvement during the channel change. But it is increasing the boot-up time(up to 15sec depend on number of radios). So if the user want to reduce the boot-up time and accepting for channel change delay, user can disable this feature using the module param cold_boot_cal=0. Tested-on: IPQ8074 WLAN.HK.2.4.0.1-01162-QCAHKSWPL_SILICONZ-1 Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Co-developed-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1602862111-14063-1-git-send-email-ssreeela@codeaurora.org
2020-11-07ath11k: search DT for qcom,ath11k-calibration-variantSven Eckelmann
Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on IPQ6018 using bus, qmi-chip-id and qmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill with the vendor requirements and it is necessary to use a different board data file. This problem was already solved on ath10k by adding a ",variant=.*" at the end of the board name. The same functionality must also be provided for ath11k. The device tree requires an additional string to define the variant name wifi@c000000 { status = "okay"; qcom,ath11k-calibration-variant = "Cigtech-WF-188"; }; This would create the boarddata identifier for the board-2.bin search * bus=ahb,qmi-chip-id=0,qmi-board-id=18,variant=Cigtech-WF-188 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201015131501.1939685-2-sven@narfation.org
2020-10-01ath11k: add packet log support for QCA6390Carl Huang
Add packet log support for QCA6390, otherwise the data connection will stall within a minute or so. Enable it via debugfs and use trace-cmd to capture the pktlogs. echo 0xffff 1 > /sys/kernel/debug/ath11k/qca6390\ hw2.0/mac0/pktlog_filter The mon status ring doesn't support interrupt so far, so host starts a timer to reap this ring. The timer handler also reaps the rxdma_err_dst_ring in case of monitor mode. As QCA6390 requires bss created ahead of starting vdev, so check vdev_start_delay for monitor mode. For QCA6390, it uses wbm_desc_rel_ring to return descriptors. It also uses rx_refill_buf_ring to fill mon buffer instead of rxdma_mon_buf_ring. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601463073-12106-2-git-send-email-kvalo@codeaurora.org
2020-09-21ath11k: Remove rproc references from common core layerGovind Singh
IPQ8074 HW uses rproc with AHB as underlying hif layer. Move rproc references from common core layer to target hif layer. Remove IS_ENABLED check for CONFIG_REMOTEPROC as it's not required anymore. No functional changes. Compile tested only. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1600090615-18904-1-git-send-email-govinds@codeaurora.org
2020-09-11ath11k: add raw mode and software crypto supportVenkateswara Naralasetty
Adding raw mode tx/rx support. Also, adding support for software crypto which depends on raw mode. To enable raw mode tx/rx: insmod ath11k.ko frame_mode=0 To enable software crypto: insmod ath11k.ko crypto_mode=1 These modes could be helpful in debugging crypto related issues. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746c6a52d9-18302a2c-0d6d-4057-aa4b-95960c809646-000000@us-west-2.amazonses.com
2020-09-11ath11k: add ipq6018 supportAnilkumar Kolli
IPQ6018 has one 5G and one 2G radio with 2x2, shares ipq8074 configurations. Tested on: IPQ6018 hw1.0 AHB WLAN.HK.2.2-02134-QCAHKSWPL_SILICONZ-1 Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746cb68b63-c2bc31ec-a31e-442e-a572-26f4c045c06b-000000@us-west-2.amazonses.com
2020-09-11ath11k: move target ce configs to hw_paramsAnilkumar Kolli
Move target CE config and target CE service config to hw_params. No functional changes. Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746cb685d9-6bedeccb-29a1-4d32-8664-fcfe7d105f4a-000000@us-west-2.amazonses.com
2020-08-18ath11k: delay vdev_start for QCA6390Carl Huang
For QCA6390 firmware, bss peer must be created before vdev_start, so delay vdev_start until bss peer is created. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597555891-26112-6-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: setup QCA6390 rings for both rxdmasCarl Huang
For QCA6390, only one pdev is created and this pdev manages both lmacs, thus both rxdmas. So host needs to initialize all rxdma related rings for one pdev. Another difference is for QCA6390, host fills rxbuf to firmware and firmware further fills the rxbuf to rxbuf ring for each rxdma. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597555891-26112-4-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: force single pdev only for QCA6390Carl Huang
For QCA6390, only one pdev is created and only one HW is registered to mac80211. This one pdev manages both 2G radio and 5G radio. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597576599-8857-10-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: add board file support for PCI devicesGovind Singh
PCI devices like QCA6390 load the board file differently, add support for that and the method is chosen using bus_params variables. Add support to create board name for different targets. This board name is used to parse the board data from board-2.bin for ahb/pci based targets. As struct target_mem_chunk::vaddr was changed from 'u32' to 'u32 *' in ath11k_qmi_assign_target_mem_chunk() vaddr assignments were changed to NULL to avoid a compilation warning. IPQ8074 does not use the vaddr field for anything so that change does not affect functionality. At the moment this only supports board files with BIN type. Support for ELF type, which seems to be more popular on QCA6390 devices, needs to be added later. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597389030-13887-3-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: add support for m3 firmwareGovind Singh
PCI devices like QCA6390 have a separate firmware image for the m3 micro-controller. Add support to load the firmware using m3.bin file. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597389030-13887-2-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: use remoteproc only with AHB devicesGovind Singh
QCA6390 and other PCI devices use MHI based firmware loading and do not use remoteproc, so enable it only for AHB devices. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-11-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: implement ath11k_core_pre_init()Kalle Valo
This is needed to initialise hw_params before MHI registration starts. MHI needs location of firmware directory and that's delivered via hw_params. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-8-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: move ring mask definitions to hw_paramsKalle Valo
This is needed for splitting ahb and pci modules as they have different ring mask settings. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-4-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: add hw_params entry for QCA6390Carl Huang
Define own firmware directory and settings for QCA6390. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-3-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: don't use defines for hw specific firmware directoriesKalle Valo
The downside of using defines in struct ath11k_hw_params.fw.dir is that it's easy to get it wrong as the full path is not visible. So drop the use of defines and instead create the patch runtime using a static inline function ath11k_core_create_firmware_path(). Hopefully this reduces the chances of using incorrect firmware path. No functional changes. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-8-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: create a common function to request all firmware filesKalle Valo
To avoid duplicating the logic how the full firmware path is created create a common function ath11k_core_firmware_request() and convert also qmi.c to use it. Also remove a useless info print, it's more like a debug message anyway. No functional changes. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-7-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: add hw_ops for pdev id to hw_mac mappingAnilkumar Kolli
pdev_id to hw_mac is different for ipq8074 and ipq6018 Below table has the mapping pdev_id ipq8074 ipq6018 ------- ------- ------- 0 0 0 1 2 1 2 1 Not applicable No functional changes. Compile tested only. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-5-git-send-email-kvalo@codeaurora.org
2020-06-15ath11k: fix wmi peer flags in peer assoc commandVenkateswara Naralasetty
Currently need ptk/gtk wmi peer flags in wmi peer assoc cmd are set based on the rsnie and wpaie of the bss from the bss list. Since this bss list is not updated with current BSSID for AP mode, we may not find bss from the bss list. Which results in ptk/gtk peer flags are not set in the wmi peer assoc cmd. Due to this EAPOL frames are going in data rates instead of management rates. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591771841-25503-1-git-send-email-vnaralas@codeaurora.org
2020-06-15ath11k: Add support for ring backpressure statsSriram R
Add support for collecting and dumping the ring backpressure stats via debugfs. Stats are dumped only if events are received for the specific ring. Below command can be used to obtain these stats as part of soc dp stats. cat /sys/kernel/debug/ath11k/ipq8074/soc_dp_stats Sample Output - When No stats available: Backpressure Stats ================== No Ring Backpressure stats received Sample Output - When ring bp stats available for specific ring Backpressure Stats ================== Ring: REO2SW1_RING count: 1 hp: 2 tp: 2 seen before: 4ms Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591768308-32005-3-git-send-email-srirrama@codeaurora.org
2020-06-15ath11k: Add dp tx err statsSriram R
Add support for dp tx error stats which logs tx failure reasons due to ring full condition, etc. This stats is added in soc_dp_stats which was earlier used as soc_rx_stats so that all dp related info are logged in same file. Below is an example usage, root@OpenWrt:/# cat /sys/kernel/debug/ath11k/ipq8074/soc_dp_stats SOC RX STATS: err ring pkts: 0 Invalid RBM: 0 <snip> SOC TX STATS: Ring Full Failures: ring0: 4 ring1: 3 ring2: 5 Misc Transmit Failures: 2 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591768308-32005-2-git-send-email-srirrama@codeaurora.org
2020-06-15ath11k: add support for spectral scanKarthikeyan Periyasamy
spectral scan control interface is exposed through debugfs eentry. Relayfs is used to collect the spectral data. These interfaces are similar to ath10k spectral. spectral debugfs interfaces are below, echo background > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl echo trigger > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl iw dev wlan0 scan echo disable > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl cat /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan0 > fft_samples.dump Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591688014-26441-2-git-send-email-periyasa@codeaurora.org
2020-06-15ath11k: Add direct buffer ring supportKarthikeyan Periyasamy
Add direct buffer ring (dbring) with helper API, which is used by the spectral scan. Initialise the direct buffer ring based on the dma ring capability, which get announced in the wmi service ready extended event. This ring is slightly changed from data path rings. Compare to data path ring this ring shares the hp and tp address to firmware though WMI commands. Also the replenish buffer size is derived from firmware announcement. driver receive indication through WMI event WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591688014-26441-1-git-send-email-periyasa@codeaurora.org
2020-06-11ath11k: build HE 6 GHz capabilityRajkumar Manoharan
Build 6 GHz band capability from HT and VHT capabilities reported by firmware. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591057888-2862-1-git-send-email-rmanohar@codeaurora.org
2020-06-11ath11k: add support for 6GHz radio in driverPradeep Kumar Chitrapu
This patch adds 6GHz band support and mac80211 registration for the 6G phy radio. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-3-pradeepc@codeaurora.org
2020-05-11ath11k: Add drv private for bus opaque structGovind Singh
Add drv private opaque structure to have bus level structure for multibus support. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200506094400.4740-3-govinds@codeaurora.org
2020-05-11ath11k: Add support for multibus supportGovind Singh
Current design supports only AHB interface for 11ax chipset. Refactor the code by adding hif layer for bus level abstraction to support PCI based device. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200506094400.4740-2-govinds@codeaurora.org
2020-05-06ath11k: add tx hw 802.11 encapsulation offloading supportJohn Crispin
This patch adds support for ethernet rxtx mode to the driver. The feature is enabled via a new module parameter. If enabled to driver will enable the feature on a per vif basis if all other requirements were met. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200430152814.18481-1-john@phrozen.org
2020-04-15ath11k: Add dynamic tcl ring selection logic with retry mechanismSriram R
IPQ8074 HW supports three TCL rings for tx. Currently these rings are mapped based on the Access categories, viz. VO, VI, BE, BK. In case, one of the traffic type dominates, then it could stress the same tcl rings. Rather, it would be optimal to make use of all the rings in a round robin fashion irrespective of the traffic type so that the load could be evenly distributed among all the rings. Also, in case the selected ring is busy or full, a retry mechanism is used to ensure other available ring is selected without dropping the packet. In SMP systems, this change avoids a single CPU from getting hogged when heavy traffic of same category is transmitted. The tx completion interrupts corresponding to the used tcl ring would be more which causes the assigned CPU to get hogged. Distribution of tx packets to different tcl rings helps balance this load. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1586782622-22570-1-git-send-email-srirrama@codeaurora.org
2020-04-15ath11k: Fix rx_filter flags setting for per peer rx_statsMaharaja Kennadyrajan
Rx_filter flags are set with default filter flags during wifi up/down sequence even though the 'ext_rx_stats' debugfs is enabled as 1. So, that we are not getting proper per peer rx_stats. Hence, fixing this by setting the missing rx_filter when ext_rx_stats is already set/enabled. Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1586538405-16226-3-git-send-email-mkenna@codeaurora.org
2020-04-06ath11k: add pktlog checksum in trace events to support pktlogMaharaja Kennadyrajan
Pktlog data are different among the chipset & chipset versions. As part of enhancing the user space script to decode the pktlog trace events generated, it is desirable to know which chipset or which chipset version has provided the events and thereby decode the pktlogs appropriately. Pktlog checksum helps to determine the chipset variant which is given by the firmware in the struct wmi_ready_event. Pktlog checksums are computed during the firmware build. So, adding that pktlog checksum in the pklog trace events. Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585234155-30574-1-git-send-email-mkenna@codeaurora.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-14 13:24:13 +0000