summaryrefslogtreecommitdiff
path: root/drivers/net/sky2.c
AgeCommit message (Expand)Author
2007-10-10[netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_countJeff Garzik
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
2007-10-10[ETHTOOL] Provide default behaviors for a few ethtool sub-ioctlsJeff Garzik
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
2007-10-10sky2: use pci_config access functionsStephen Hemminger
2007-10-10sky2: advanced error reportingStephen Hemminger
2007-10-10sky2: dont restrict config space accessStephen Hemminger
2007-10-10sky2: use debugfs renameStephen Hemminger
2007-10-10[NET]: Make NAPI polling independent of struct net_device objects.Stephen Hemminger
2007-10-03sky2: jumbo frame regression fixStephen Hemminger
2007-09-27sky2: fix transmit state on resumeStephen Hemminger
2007-09-27sky2: FE+ vlan workaroundStephen Hemminger
2007-09-27sky2: sky2 FE+ receive status workaroundStephen Hemminger
2007-09-25sky2: be more selective about FIFO watchdogStephen Hemminger
2007-09-25sky2: FE+ Phy initializationStephen Hemminger
2007-09-20sky2: version 1.18Stephen Hemminger
2007-09-20sky2: receive FIFO checkingStephen Hemminger
2007-09-20sky2: fe+ chip supportStephen Hemminger
2007-09-20sky2: reorganize chip revision featuresStephen Hemminger
2007-09-20sky2: ethtool speed report bugStephen Hemminger
2007-09-20sky2: fix VLAN receive processing (resend)Stephen Hemminger
2007-09-13sky2: restore multicast list on resume and other opsStephen Hemminger
2007-08-25sky2 1.17Stephen Hemminger
2007-08-25sky2: only bring up watchdog if link is activeStephen Hemminger
2007-08-25sky2: clear PCI power control reg at startupStephen Hemminger
2007-08-21sky2: don't clear phy power bitsStephen Hemminger
2007-07-31[NET]: ethtool_perm_addr only has one implementationMatthew Wilcox
2007-07-20Fix up sky2 breakageAl Viro
2007-07-10sky2: 1.16 versionStephen Hemminger
2007-07-10sky2: remove some leftover debug messagesStephen Hemminger
2007-07-10sky2: use upper_32_bits() macroStephen Hemminger
2007-07-10sky2: use roundup() macroStephen Hemminger
2007-07-10sky2: check drop truncated packetsStephen Hemminger
2007-07-10sky2: add support for read/write of EEPROMStephen Hemminger
2007-07-10sky2: receive fillStephen Hemminger
2007-07-10sky2: check for more work before leaving NAPIStephen Hemminger
2007-07-10sky2: debug interfaceStephen Hemminger
2007-07-10sky2: carrier managementStephen Hemminger
2007-07-10sky2: restore workarounds for lost interruptsStephen Hemminger
2007-07-08sky2: version 1.15Stephen Hemminger
2007-07-08sky2: Yukon Extreme (88e8071) support.Stephen Hemminger
2007-07-08sky2: GPIO registerStephen Hemminger
2007-07-08sky2: enable clocks before probeStephen Hemminger
2007-07-08sky2: rename BMU registerStephen Hemminger
2007-07-08sky2: Add PCI device specfic register 4 & 5Stephen Hemminger
2007-07-08sky2: avoid reserved regions on ethtool reg dumpStephen Hemminger
2007-06-03sky2: Fix VLAN unregistrationStephen Hemminger
2007-05-30sky2: program proper register for fiber PHYStephen Hemminger
2007-05-30sky2: checksum offload plus vlan bugStephen Hemminger
2007-05-30sky2: dont set bogus bit in PHY registerStephen Hemminger
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 04:36:57 +0000