summaryrefslogtreecommitdiff
path: root/drivers/net/phy/phy-core.c
AgeCommit message (Collapse)Author
2019-10-04net: phy: extract pause modeRussell King
Extract the update of phylib's software pause mode state from genphy_read_status(), so that we can re-use this functionality with PHYs that have alternative ways to read the negotiation results. Tested-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-13net: phy: add phy_speed_down_core and phy_resolve_min_speedHeiner Kallweit
phy_speed_down_core provides most of the functionality for phy_speed_down. It makes use of new helper phy_resolve_min_speed that is based on the sorting of the settings[] array. In certain cases it may be helpful to be able to exclude legacy half duplex modes, therefore prepare phy_resolve_min_speed() for it. v2: - rename __phy_speed_down to phy_speed_down_core Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13net: phy: add __set_linkmode_max_speedHeiner Kallweit
We will need the functionality of __set_linkmode_max_speed also for linkmode bitmaps other than phydev->supported. Therefore split it. v2: - remove unused parameter from __set_linkmode_max_speed Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-11net: phy: add phy_modify_paged_changedHeiner Kallweit
Add helper function phy_modify_paged_changed, behavios is the same as for phy_modify_changed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: Add support for 100BaseT1 and 1000BaseT1Andrew Lunn
Add link modes for 100Mbps and 1Gbps over a single pair. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: phy: improve pause handlingHeiner Kallweit
When probing the phy device we set sym and asym pause in the "supported" bitmap (unless the PHY tells us otherwise). However we don't know yet whether the MAC supports pause. Simply copying phy->supported to phy->advertising will trigger advertising pause, and that's not what we want. Therefore add phy_advertise_supported() that copies all modes but doesn't touch the pause bits. In phy_support_(a)sym_pause we shouldn't set any bits in the supported bitmap because we may set a bit the PHY intentionally disabled. Effective pause support should be the AND-combined PHY and MAC pause capabilities. If the MAC supports everything, then it's only relevant what the PHY supports. If MAC supports sym pause only, then we have to clear the asym bit in phydev->supported. Copy the pause flags only and don't touch the modes, because a driver may have intentionally removed a mode from phydev->advertising. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14phy: warn if phylib and ethtool PHY mode definitions are out of syncHeiner Kallweit
If new PHY modes are added people may miss to update all relevant places in the kernel. Therefore add a build bug check for new modes in enum ethtool_link_mode_bit_indices that haven't been added to phylib yet. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14net: phy: add support for new modes in phylibHeiner Kallweit
Recently new modes have been added to ethtool.h, but the related extension to phylib hasn't been done yet. So add support for these modes. v2: - add missing 100Gbps and 50Gbps modes Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14net: phy: shrink PHY settings arrayHeiner Kallweit
The definition of array settings[] is quite lengthy meanwhile. Add a macro to shrink the definition. v2: - Fix an indentation issue Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: improve phy_resolve_aneg_linkmodeHeiner Kallweit
We have the settings array of modes which is sorted based on aneg priority. Instead of checking each mode manually let's simply iterate over the sorted settings. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: phy: Move of_set_phy_eee_broken to phy-core.cMaxime Chevallier
Since of_set_phy_supported was moved to phy-core.c, we can also move of_set_phy_eee_broken to the same location, so that we have all OF functions in the same place. This patch doesn't intend to introduce any change in behaviour. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: phy: Mask-out non-compatible modes when setting the max-speedMaxime Chevallier
When setting a PHY's max speed using either the max-speed DT property or ethtool, we should mask-out all non-compatible modes according to the settings table, instead of just the 10/100BASET modes. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: phy: add register modifying helpers returning 1 on changeHeiner Kallweit
When modifying registers there are scenarios where we need to know whether the register content actually changed. This patch adds new helpers to not break users of the current ones, phy_modify() etc. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: phy: provide full set of accessor functions to MMD registersNikita Yushchenko
This adds full set of locked and unlocked accessor functions to read and write PHY MMD registers and/or bitfields. Set of functions exactly matches what is already available for PHY legacy registers. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Convert some PHY and MDIO driver files to SPDX headersAndrew Lunn
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: Add support for resolving 5G and 2.5G autonegAndrew Lunn
Now that 2.5G and 5G can be represented in phydev->advertising and phydev->lp_advertising, add these two links modes as possible resolutions to auto negotiation. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: Add more link modes to the settings tableAndrew Lunn
Now that PHYs and MAC can support more than 32 bit masks, add link modes which are > 31 to the PHY settings table. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: Convert u32 phydev->lp_advertising to linkmodeAndrew Lunn
Convert phy drivers to report the link partner advertised modes using a linkmode bitmap. This allows them to report the higher speeds which don't fit in a u32. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net: phy: Fix spelling mistake: "advertisment"-> "advertisement"Colin Ian King
Trivial fix to spelling mistake in comments and error message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-15net: phy: Have __phy_modify return 0 on successAndrew Lunn
__phy_modify would return the old value of the register before it was modified. Thus on success, it does not return 0, but a positive value. Thus functions using phy_modify, which is a wrapper around __phy_modify, can start returning > 0 on success, rather than 0. As a result, breakage has been noticed in various places, where 0 was assumed. Code inspection does not find any current location where the return of the old value is currently used. So have __phy_modify return 0 on success. When there is a real need for the old value, either a new accessor can be added, or an additional parameter passed. Fixes: fea23fb591cc ("net: phy: convert read-modify-write to phy_modify()") Fixes: 2b74e5be17d2 ("net: phy: add phy_modify() accessor") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08net: phy: fix wrong masks to phy_modify()Russell King
The mask argument for phy_modify() in several locations was inverted. Fixes: fea23fb591cc ("net: phy: convert read-modify-write to phy_modify()") Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: phy: add phy_modify() accessorRussell King
Add phy_modify() convenience accessor to complement the mdiobus counterpart. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: phy: add paged phy register accessorsRussell King
Add a set of paged phy register accessors which are inherently safe in their design against other accesses interfering with the paged access. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: phy: add unlocked accessorsRussell King
Add unlocked versions of the bus accessors, which allows access to the bus with all the tracing. These accessors validate that the bus mutex is held, which is a basic requirement for all mii bus accesses. Also added is a read-modify-write unlocked accessor with the same locking requirements. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03net: phy: use unlocked accessors for indirect MMD accessesRussell King
Use unlocked accessors for indirect MMD accesses to clause 22 PHYs. This permits tracing of these accesses. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: phy: add helper to convert negotiation result to phy settingsRussell King
Add a helper to convert the result of the autonegotiation advertisment into the PHYs speed and duplex settings. If the result is full duplex, also extract the pause mode settings from the link partner advertisment. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06net: phy: add 1000Base-X to phy settings tableRussell King
Add the missing 1000Base-X entry to the phy settings table. This was not included because the original code could not cope with more than 32 bits of link mode mask. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06net: phy: move phy_lookup_setting() and guts of phy_supported_speeds() to ↵Russell King
phy-core phy_lookup_setting() provides useful functionality in ethtool code outside phylib. Move it to phy-core and allow it to be re-used (eg, in phylink) rather than duplicated elsewhere. Note that this supports the larger linkmode space. As we move the phy settings table, we also need to move the guts of phy_supported_speeds() as well. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06net: phy: split out PHY speed and duplex string generationRussell King
Other code would like to make use of this, so make the speed and duplex string generation visible, and place it in a separate file. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: phy: test the right variable in phy_write_mmd()Dan Carpenter
This is a copy and paste buglet. We meant to test for ->write_mmd but we test for ->read_mmd. Fixes: 1ee6b9bc6206 ("net: phy: make phy_(read|write)_mmd() generic MMD accessors") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: phy: clean up mmd_phy_indirect()Russell King
Make mmd_phy_indirect() use the same terminology as the rest of the code, making clear what each address is - phy address, devad, and register number. While here, remove the "inline" from this static function, leaving it to the compiler to decide whether to inline this function, and get rid of unnecessary parens. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: phy: remove the indirect MMD read/write methodsRussell King
Remove the indirect MMD read/write methods which are now no longer necessary. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: phy: make phy_(read|write)_mmd() generic MMD accessorsRussell King
Make phy_(read|write)_mmd() generic 802.3 clause 45 register accessors for both Clause 22 and Clause 45 PHYs, using either the direct register reading for Clause 45, or the indirect method for Clause 22 PHYs. Allow this behaviour to be overriden by PHY drivers where necessary. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: phy: move phy MMD accessors to phy-core.cRussell King
Move the phy_(read|write)__mmd() helpers out of line, they will become our main MMD accessor functions, and so will be a little more complex. This complexity doesn't belong in an inline function. Also move the _indirect variants as well to keep like functionality together. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 04:51:58 +0000