summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x
AgeCommit message (Collapse)Author
2011-08-10broadcom: Move the Broadcom driversJeff Kirsher
Moves the drivers for Broadcom devices into drivers/net/ethernet/broadcom/ and the necessary Kconfig and Makefile changes. CC: Eilon Greenstein <eilong@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Gary Zambrano <zambrano@broadcom.com> CC: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-03bnx2x: Clear MDIO access warning during first driver loadYaniv Rosner
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM578xx MAC testYaniv Rosner
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM54618se invalid link indicationYaniv Rosner
After resetting BCM54618se, link partner would still see link since the PHY wasn't put into low-power state. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM84833 linkYaniv Rosner
BCM84833 fail to link due to incorrect auto-negotiation setting. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix link issue with DAC over 578xxYaniv Rosner
Fix no-link issue on BCM578xx when direct attached cable is connected since Warpcore microcode restart was missing to re-read the new mode. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix LED behaviorYaniv Rosner
This fix resolve two problems seen regarding LED: 1. LED doesn't flash during port identification. 2. Traffic LED sometimes do not blink. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix BCM578xx-B0 MDIO accessYaniv Rosner
Fix MDIO access to Warpcore on new chip version of 578xx. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix remote fault handlingYaniv Rosner
Fix couple of issues of remote fault detection and handling: Link may go down due to remote fault indications during link establishment. Possible link down after primary function migration. Remote fault was not detected on 578xx. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix chip hanging due to TX pipe stall.Yaniv Rosner
Fix a problem in which the 578xx chip hangs after running traffic, and then pulling the network cable. This occurs since TX pipe is stalled due to missing XON indication towards the NIG. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03bnx2x: Fix missing pause on for 578xxYaniv Rosner
When link speed is 1G and below, pause weren't sent due to missing pause setting in the UMAC. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02bnx2x: Prevent restarting Tx during bnx2x_nic_unloadVladislav Zolotarov
Tx queues were stopped before bp->state was changed to a value different from BNX2X_STATE_OPEN, which allowed the bnx2x_tx_int() called from the NAPI context to re-enable it. This then allowed the netdev->ndo_start_xmit() to be called in the middle of the function reset and rings freeing. This patch changes bp->state to a value different from BNX2X_STATE_OPEN BEFORE disabling the Tx queues in order to restore the broken protection against the above race in the bnx2x_tx_int(). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: use pci_pcie_cap()Vladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: fix bnx2x_stop_on_error flow in bnx2x_sp_rtnl_taskVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: enable internal target-read for 57712 and up onlyShmulik Ravid
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: count statistic ramrods on EQ to prevent MC assertVladislav Zolotarov
This patch includes: - Counting statistics ramrods as EQ ramrods the way they should be. This accounting is meant to prevent MC asserts in case of software bugs. - Fixes in debug facilities which were added while working on one of such bugs. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: fix loopback for non 10G linkYaniv Rosner
Also fixes minor formatting in that function. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: dcb - send all unmapped priorities to same COS as L2Dmitry Kravkov
As a result of DCBX negotiation some priorities maybe untouched and still unmapped to any COS; instead of sending them to COS0 we assign them to the same COS as L2 traffic - to avoid collisions with storage class of service. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21bnx2x: Broken self-test in SF mode on 578xxVladislav Zolotarov
This patch fixes both the failure in the self-test on 578xx and a hole in a parity recovery flow that this failure has discovered: - internal 'pending' state in a VLAN_MAC object wasn't been cleared when the object state change was called with DRV_ONLY flag, which in particular happens when a parity error happens during the self-test. - bp->sp_state wasn't cleared in the similar circumstances as described above. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21bnx2x: Parity errors recovery for 578xxVladislav Zolotarov
Fix the parity errors recovery flow for 578xx: - Add a separate column for the 578xx in the parity mask registers DB. - Fix the bnx2x_process_kill_chip_reset() to handle the blocks newly introduced in the 578xx. Cover ATC and PGLUE_B blocks for 57712 and 578xx. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21bnx2x: Read FIP mac from SHMEM in single function modeVladislav Zolotarov
Read FIP MAC address from SHMEM's "port" section similar to what we do in a MF mode when we read it from a "func" section of SHMEM. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21bnx2x: Fixed ethtool -d for 578xxVladislav Zolotarov
Registers dump code erroneously treated 578xx as 57712. This patch fixes the above and also removes unused data structures. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21bnx2x: Implementation for netdev->ndo_fcoe_get_wwnVladislav Zolotarov
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: disable FCoE for 578xx devices since not yet supportedDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: fix memory barriersVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: use BNX2X_Q_FLG_TPA_IPV6 for TPA queue configurationVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: disable loacal BH when scheduling FCOE napiVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: fix MB index for 4-port devicesDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: DCB reworkDmitry Kravkov
create DCB related states in function state-machine allow handling of DCB errors from FW allow disablement of DCB in FW, when peer disappears or error clean up unused functions/variables as pointed by David Binderman <dcb314@hotmail.com> Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: remove unnecessary dma_syncVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: stop tx before CNIC_STOPVladislav Zolotarov
It may take some time to cnic to respond, this prevents tx_timeout when it happens. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: add missing command in error handling flowDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19bnx2x: use correct dma_sync functionVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-16bnx2x: Fix compilation when CNIC is not selected in configDmitry Kravkov
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14bnx2x: Multiple concurrent l2 traffic classesAriel Elior
Overview: Support mapping of priorities to traffic classes and traffic classes to transmission queues ranges in the net device. The queue ranges are (count, offset) pairs relating to the txq array. This can be done via DCBX negotiation or by kernel. As a result Enhanced Transmission Selection (ETS) and Priority Flow Control (PFC) are supported between L2 network traffic classes. Mapping: This patch uses the netdev_set_num_tc, netdev_set_prio_tc_map and netdev_set_tc_queue functions to map priorities to traffic classes and traffic classes to transmission queue ranges. This mapping is performed by bnx2x_setup_tc function which is connected to the ndo_setup_tc. This function is always called at nic load where by default it maps all priorities to tc 0, and it may also be called by the kernel or by the bnx2x upon DCBX negotiation to modify the mapping. rtnl lock: When the ndo_setup_tc is called at nic load or by kernel the rtnl lock is already taken. However, when DCBX negotiation takes place the lock is not taken. The work is therefore scheduled to be handled by the sp_rtnl task. Fastpath: The fastpath structure of the bnx2x which was previously used to hold the information of one tx queue and one rx queue was redesigned to represent multiple tx queues, one for each traffic class. The transmission queue supplied in the skb by the kernel can no longer be interpreted as a straightforward index into the fastpath structure array, but it must rather be decoded to the appropriate fastpath index and the tc within that fastpath. Slowpath: The bnx2x's queue object was redesigned to accommodate multiple transmission queues. The queue object's state machine was enhanced to allow opening multiple transmission-only connections on top of the regular tx-rx connection. Firmware: This feature relies on the tx-only queue feature introduced in the bnx2x 7.0.23 firmware and the FW likewise must have the bnx2x multi cos support. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14bnx2x: Renaming the "reset_task" to "sp_rtnl_task"Ariel Elior
Renaming the "reset_task" to a more general purpose name, "sp_rtnl_task", as it is already used for another purpose other than reset which is parity recovery, and since I plan to add a third operation for this task, updating the priority to traffic class and traffic class to transmission queues mappings after dcbx negotiation takes place. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07bnx2x: Add dcbnl notificationShmulik Ravid
This patch adds a dcbnl notification to the bnx2x. The notification is sent to user mode clients following a change in the dcb negotiated parameters as resolved by the embedded DCBX stack. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07net: fix warning of versioncheckShan Wei
net-next-2.6/drivers/net/bnx2x/bnx2x_sp.c: 19 linux/version.h not needed. net-next-2.6/drivers/net/caif/caif_hsi.c: 9 linux/version.h not needed. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-07-05bnx2x: Fix warning message during 57712/8727 initializationYaniv Rosner
Clear warning message "MDC/MDIO access timeout" during first driver load by setting MDIO clock. This warning has no significant meaning, since it occurs prior to the first PHY initialization. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Add autogrEEEn supportYaniv Rosner
Add autogrEEEn support on BCM84833 and 54618se, which allows to reduce power consumption. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Fix BCM84833 initializationYaniv Rosner
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Fix false link indication at link partner when DAC is usedYaniv Rosner
When driver is unloaded, disable PMD in addition to TX laser, provided that the management firmware will be able to enable it back. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Reset PHY due to fan failure for 578xxYaniv Rosner
Add hardware PHY reset action for BCM578xx when fan failure occur. The new bnx2x_warpcore_hw_reset warps bnx2x_warpcore_power_module to fit the .hw_reset function template of the phy structure. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Add CL37 BAM for WarpcoreYaniv Rosner
Add CL37 BAM support according to configuration. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: Change BCM54616S to BCM54618SEYaniv Rosner
Change 1G copper PHY BCM54616S to BCM54618SE since we only have HW with latter one of the two. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05bnx2x: PFC fixesYaniv Rosner
Set the source MAC address for PFC packets and update its status during PMF migration. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29net+crypto: Use vmalloc for zlib inflate buffers.David S. Miller
They are 64K and result in order-4 allocations, even with SLUB. Therefore, just like we always have for the deflate buffers, use vmalloc. Reported-by: Martin Jackson <mjackson220.list@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27bnx2x: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, pci_is_pcie is a better way of determining if the device is PCIE or not (as it uses the same saved PCIE capability offset). Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21net: remove mm.h inclusion from netdevice.hAlexey Dobriyan
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 08:01:11 +0000