| Age | Commit message (Collapse) | Author |
|---|
|
just like the V4L2 core, move the DVB core to drivers/media, as the
intention is to get rid of both "video" and "dvb" directories.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
When the TEI bit is raised, we should not trust any of the contents of
the packet in question, including but not limited to its PID number.
Considering that we don't trust the PID number of this packet, we should
not proceed to check the packet counter (if dvb_demux_tscheck is set).
We should expect to see at least one discontinuity after a bad packet is
received, so any time a TEI is detected, a following TS packet counter
mismatch is to be expected.
There is no real reason to ever allow bad packets to pass through the
kernel demux, other than for purposes of attempting error correction via
software or statistical information.
However, since we have always passed these bad packets though the demux,
we should not change this default behavior.
Without altering module options, this patch merely prevents the
TS packet counter check on packets containing a raised TEI.
If module option dvb_demux_feed_err_pkts is set to 0, the kernel demux
will drop these error packets entirely, preventing any possibility of
corruption caused by userspace programs that are expecting valid data.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This callback were meant to allow overriding a FE callback, before its
call, but it is not really needed, as the callback can be intercepted
after tuner attachment.
Worse than that, only DVBv3 calls are intercepted this way, so a DVBv5
application will produce different effects than a DVBv3 one.
So, get rid of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
|
|
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Cc: Andreas Oberritter <obi@linuxtv.org>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This DVB_FE_IOCTL_POST isn't used, so remove it.
Also, intercepting ioctl's like that only works with legacy ioctl's,
due to the way it was implemented. so this design is broken.
Document it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
While this header were meant to be used just by dvb-usb driver, it
is now being used also by dvb-usb-v2 and cx231xx. So, move it to a
better place.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
* v4l_for_linus: (31 commits)
[media] Revert "[media] V4L: JPEG class documentation corrections"
[media] s5p-fimc: Add missing FIMC-LITE file operations locking
[media] omap3isp: preview: Fix contrast and brightness handling
[media] omap3isp: preview: Fix output size computation depending on input format
[media] winbond-cir: Initialise timeout, driver_type and allowed_protos
[media] winbond-cir: Fix txandrx module info
[media] cx23885: Silence unknown command warnings
[media] cx23885: add support for HVR-1255 analog (cx23888 variant)
[media] cx23885: make analog support work for HVR_1250 (cx23885 variant)
[media] cx25840: fix vsrc/hsrc usage on cx23888 designs
[media] cx25840: fix regression in HVR-1800 analog audio
[media] cx25840: fix regression in analog support hue/saturation controls
[media] cx25840: fix regression in HVR-1800 analog support
[media] s5p-mfc: Fixed setup of custom controls in decoder and encoder
[media] cx231xx: don't DMA to random addresses
[media] em28xx: fix em28xx-rc load
[media] dvb-core: Release semaphore on error path dvb_register_device()
[media] s5p-fimc: Stop media entity pipeline if fimc_pipeline_validate fails
[media] s5p-fimc: Fix compiler warning in fimc-lite.c
[media] s5p-fimc: media_entity_pipeline_start() may fail
...
|
|
There is a missing "up_write()" here. Semaphore should be released
before returning error value.
Cc: stable@kernel.org
Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Implement API support to return AFC frequency shift, as this device
supports it. The only other driver that implements it is tda9887,
and the frequency there is reported in Hz. So, use Hz also for this
tuner.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Mauro is proposing a new API to handle statistics. This functionality will
be returned after the statistics API is ready. Just remove them for now.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
If your driver needs to deliver the raw payload to userspace without
passing through the kernel demux, use function: dvb_dmx_swfilter_raw
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Add the following properties for controlling an ATSC-MH frontend:
DTV_ATSCMH_FIC_VER
DTV_ATSCMH_PARADE_ID
DTV_ATSCMH_NOG
DTV_ATSCMH_TNOG
DTV_ATSCMH_SGN
DTV_ATSCMH_PRC
DTV_ATSCMH_RS_FRAME_MODE
DTV_ATSCMH_RS_FRAME_ENSEMBLE
DTV_ATSCMH_RS_CODE_MODE_PRI
DTV_ATSCMH_RS_CODE_MODE_SEC
DTV_ATSCMH_SCCC_BLOCK_MODE
DTV_ATSCMH_SCCC_CODE_MODE_A
DTV_ATSCMH_SCCC_CODE_MODE_B
DTV_ATSCMH_SCCC_CODE_MODE_C
DTV_ATSCMH_SCCC_CODE_MODE_D
DTV_ATSCMH_FIC_ERR
DTV_ATSCMH_CRC_ERR
DTV_ATSCMH_RS_ERR
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"For a some fix patches for v3.4, including a regression fix at DVB core"
Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] gspca - sonixj: Fix a zero divide in isoc interrupt
[media] media: videobuf2-dma-contig: include header for exported symbols
[media] media: videobuf2-dma-contig: quiet sparse noise about plain integer as NULL pointer
[media] media: vb2-memops: Export vb2_get_vma symbol
[media] s5p-fimc: Correct memory allocation for VIDIOC_CREATE_BUFS
[media] s5p-fimc: Fix locking in subdev set_crop op
[media] dvb_frontend: fix a regression with DVB-S zig-zag
[media] fintek-cir: change || to &&
[media] V4L: Schedule V4L2_CID_HCENTER, V4L2_CID_VCENTER controls for removal
[media] rc: Postpone ISR registration
[media] marvell-cam: fix an ARM build error
[media] V4L: soc-camera: protect hosts during probing from overzealous user-space
|
|
Changeset 5bfaadde broke zig-zag for DVB-S drivers that don't
implement get_tune_settings() callback.
Fix the code, in order to allow it to work as before, otherwise
some channels may not be tuned anymore.
Fix Fedora Bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=814404
Cc: stable@kernel.org # for Kernel v3.3
Reported-by: Michael Heijenga <database.worker@googlemail.com>
Tested-by: Michael Heijenga <database.worker@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- Fixes a regression at DVB core when switching from DVB-S2 to DVB-S on
Kaffeine (Fedora 16 Bugzilla #812895);
- Fixes a mutex unlock at an error condition at drx-k;
- Fix winbond-cir set mode;
- mt9m032: Fix a compilation breakage with some random Kconfig;
- mt9m032: fix two dead locks;
- xc5000: don't require an special firmware (that won't be provided by
the vendor) just because the xtal frequency is different;
- V4L DocBook: fix some typos at multi-plane formats description.
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware
[media] V4L: mt9m032: fix compilation breakage
[media] V4L: DocBook: Fix typos in the multi-plane formats description
[media] V4L: mt9m032: fix two dead-locks
[media] rc-core: set mode for winbond-cir
[media] drxk: Does not unlock mutex if sanity check failed in scu_command()
[media] dvb_frontend: Fix a regression when switching back to DVB-S
|
|
There are some softwares (Kaffeine and likely xine) that uses a
DVBv5 call to switch to DVB-S2, but expects that a DVBv3 call to
switch back to DVB-S. Well, this is not right, as a DVBv3 call
doesn't know anything about delivery systems.
However, as, by accident, this used to work, we need to restore its
behavior, in order to avoid regressions with those softwares.
Reported on this Fedora 16 bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=812895
Reported-by: Dieter Roever <Dieter.Roever@gmx.de>
Cc: stable@kernel.org # for version 3.3
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- dvb core: there is a regression found when used with xine. For
whatever unknown reason, xine (and xine-lib clients) wants that the
frontend to tell what frequency he is using even before the PLL lock
(or at least, it expects a non-zero frequency).
On DVB, the frequency is only actually known after a frequency
zig-zag seek, done by the DVB core. Anyway, the fix was trivial.
That solves Fedora BZ#808871.
- ivtv: fix a regression when selecting the language channel
- uvc: fix a race-related crash
- it913x: fixes firmware loading
- two trivial patches (a dependency issue at a radio driver at sound
Kconfig, and a warning fix on dvb).
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] uvcvideo: Fix race-related crash in uvc_video_clock_update()
[media] Drivers/media/radio: Fix build error
[media] dvb_frontend: fix compiler warning
[media] it913x: fix firmware loading errors
[media] ivtv: Fix AUDIO_(BILINGUAL_)CHANNEL_SELECT regression
[media] dvb_frontend: regression fix: userspace ABI broken for xine
|
|
has_get_frontend() should return a boolean, not a pointer.
Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The commit e399ce77e6e has broken the DVB ABI for xine:
The problem is that xine is expecting every event after a successful
FE_SET_FRONTEND ioctl to have a non-zero frequency parameter, regardless
of whether the tuning process has LOCKed yet. What used to happen is
that the events inherited the initial tuning parameters from the
FE_SET_FRONTEND call. However, the fepriv->parameters_out struct is now
not initialised until the status contains the FE_HAS_LOCK bit.
You might argue that this behaviour is intentional, except that if an
application other than xine uses the DVB adapter and manages to set the
parameters_out.frequency field to something other than zero, then xine
no longer has any problems until either the adapter is replugged or the
kernel modules reloaded. This can only mean that the
fepriv->parameters_out struct still contains the (stale) tuning
information from the previous application.
Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Cc: stable@kernel.org # for kernel version 3.3
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system
Pull "Disintegrate and delete asm/system.h" from David Howells:
"Here are a bunch of patches to disintegrate asm/system.h into a set of
separate bits to relieve the problem of circular inclusion
dependencies.
I've built all the working defconfigs from all the arches that I can
and made sure that they don't break.
The reason for these patches is that I recently encountered a circular
dependency problem that came about when I produced some patches to
optimise get_order() by rewriting it to use ilog2().
This uses bitops - and on the SH arch asm/bitops.h drags in
asm-generic/get_order.h by a circuituous route involving asm/system.h.
The main difficulty seems to be asm/system.h. It holds a number of
low level bits with no/few dependencies that are commonly used (eg.
memory barriers) and a number of bits with more dependencies that
aren't used in many places (eg. switch_to()).
These patches break asm/system.h up into the following core pieces:
(1) asm/barrier.h
Move memory barriers here. This already done for MIPS and Alpha.
(2) asm/switch_to.h
Move switch_to() and related stuff here.
(3) asm/exec.h
Move arch_align_stack() here. Other process execution related bits
could perhaps go here from asm/processor.h.
(4) asm/cmpxchg.h
Move xchg() and cmpxchg() here as they're full word atomic ops and
frequently used by atomic_xchg() and atomic_cmpxchg().
(5) asm/bug.h
Move die() and related bits.
(6) asm/auxvec.h
Move AT_VECTOR_SIZE_ARCH here.
Other arch headers are created as needed on a per-arch basis."
Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that. We'll find out anything that got broken and fix it..
* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
Delete all instances of asm/system.h
Remove all #inclusions of asm/system.h
Add #includes needed to permit the removal of asm/system.h
Move all declarations of free_initmem() to linux/mm.h
Disintegrate asm/system.h for OpenRISC
Split arch_align_stack() out from asm-generic/system.h
Split the switch_to() wrapper out of asm-generic/system.h
Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
Create asm-generic/barrier.h
Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
Disintegrate asm/system.h for Xtensa
Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
Disintegrate asm/system.h for Tile
Disintegrate asm/system.h for Sparc
Disintegrate asm/system.h for SH
Disintegrate asm/system.h for Score
Disintegrate asm/system.h for S390
Disintegrate asm/system.h for PowerPC
Disintegrate asm/system.h for PA-RISC
Disintegrate asm/system.h for MN10300
...
|
|
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it. Performed with the following command:
perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Commit 7e07222 breaks DVBFE_ALGO_HW tuning after a retune is requested,
which causes bad tuning on my TBS 6920.
[ 0.769091] pci 0000:06:00.0: [14f1:8852] type 0 class 0x000400
[ 19.733530] CORE cx23885[0]: subsystem: 6920:8888, board: TurboSight TBS 6920 [card=14,autodetected]
[ 762.824912] cx24116_load_firmware: FW version 1.23.86.1
7e0722215a510921cbb73ab4c37477d4dcb91bf8 [media] dvb-core: Don't pass DVBv3 parameters on tune() fops
Although re_tune is set to true when FESTATE_RETUNE occurs, it is never
set back to false which the old code used to do when !FESTATE_RETUNE.
This patch sets re_tune to false if !(state & FESTATE_RETUNE).
$ szap-s2 -a 2 "Channel 5"
reading channels from file '/home/simon/.szap/channels.conf'
zapping to 247 'Channel 5':
delivery DVB-S, modulation QPSK
sat 0, frequency 10964 MHz H, symbolrate 22000000, coderate 5/6, rolloff 0.35
vpid 0x092a, apid 0x092b, sid 0x092d
using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0'
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cec0 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cec0 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (57 commits)
[media] as3645a: Fix compilation by including slab.h
[media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c
[media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c
[media] ds3000: using logical && instead of bitwise &
[media] v4l2-ctrls: make control names consistent
[media] DVB: dib0700, add support for Nova-TD LEDs
[media] DVB: dib0700, add corrected Nova-TD frontend_attach
[media] DVB: dib0700, separate stk7070pd initialization
[media] DVB: dib0700, move Nova-TD Stick to a separate set
[media] : add MODULE_FIRMWARE to dib0700
[media] DVB-CORE: remove superfluous DTV_CMDs
[media] s5p-jpeg: adapt to recent videobuf2 changes
[media] s5p-g2d: fixed a bug in controls setting function
[media] s5p-mfc: Fix volatile controls setup
[media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test
[media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test
[media] s5p-fimc: Fix incorrect control ID assignment
[media] dvb_frontend: Don't call get_frontend() if idle
[media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T
[media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters
...
|
|
This small patch removes superfluous DTV_CMDs from dvb_frontend.c which were added in the initially when ISBD-T support was added.
They were there unnoticed even though compilers should have warning about those duplicates. Finally they did and now we can remove them.
Thanks to Dan Carpenter <dan.carpenter@oracle.com> for pointing that out.
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
If the frontend is in idle state, don't call get_frontend.
Calling get_frontend() when the device is not tuned may
result in wrong parameters to be returned to the
userspace.
I was tempted to not call get_frontend() at all, except
inside the dvb frontend thread, but this won't work for
all cases. The ISDB-T specs (ABNT NBR 15601 and ARIB
STD-B31) allow the broadcaster to dynamically change the
channel specs at runtime. That means that an ISDB-T optimized
application may want/need to monitor the TMCC tables, decoded
at the frontends via get_frontend call.
So, let's do the simpler change here.
Eventually, the logic could be changed to work only if
the device is tuned and has lock, but, even so, the
lock is also standard-dependent. For ISDB-T, the right
lock to wait is that the demod has TMCC lock. So, drivers
may need to implement some logic to detect if the get_frontend
info was retrieved or not.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (655 commits)
[media] revert patch: HDIC HD29L2 DMB-TH USB2.0 reference design driver
mb86a20s: Add a few more register settings at the init seq
mb86a20s: Group registers into the same line
[media] [PATCH] don't reset the delivery system on DTV_CLEAR
[media] [BUG] it913x-fe fix typo error making SNR levels unstable
[media] cx23885: Query the CX25840 during enum_input for status
[media] cx25840: Add support for g_input_status
[media] rc-videomate-m1f.c Rename to match remote controler name
[media] drivers: media: au0828: Fix dependency for VIDEO_AU0828
[media] convert drivers/media/* to use module_platform_driver()
[media] drivers: video: cx231xx: Fix dependency for VIDEO_CX231XX_DVB
[media] Exynos4 JPEG codec v4l2 driver
[media] doc: v4l: selection: choose pixels as units for selection rectangles
[media] v4l: s5p-tv: mixer: fix setup of VP scaling
[media] v4l: s5p-tv: mixer: add support for selection API
[media] v4l: emulate old crop API using extended crop/compose API
[media] doc: v4l: add documentation for selection API
[media] doc: v4l: add binary images for selection API
[media] v4l: add support for selection api
[media] hd29l2: fix review findings
...
|
|
The changeset 240ab508aa is incomplete, as the first thing that
happens at cache clear is to do a memset with 0 to the cache.
So, the delivery system needs to be explicitly preserved there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
As reported by Lawrence[1], MythTV 0.24.1 does the wrong thing
with a DVBv5 call: it fills the delivery system with
SYS_UNDEFINED, expecting that the DVB core would work with that.
This used to work by accident, as the DVB core were missing the
check for the supported delivery systems. Yet, fixing it
is easy, so let's add a logic to handle this case, to
provide backward compatibility.
[1] http://patchwork.linuxtv.org/patch/8314/
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
As a DVBv3 application may be relying on the delivery system,
don't reset it at DTV_CLEAR. For DVBv5 applications, the
delivery system should be set anyway.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Allow use of that general callback for demod too.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
As reported by Toralf:
the build failed with :
CC [M] drivers/media/dvb/dvb-core/dvb_ca_en50221.o
In file included from arch/x86/include/asm/uaccess.h:573:0,
from include/linux/poll.h:14,
from drivers/media/dvb/dvb-core/dvbdev.h:27,
from drivers/media/dvb/dvb-core/dvb_ca_en50221.h:27,
from drivers/media/dvb/dvb-core/dvb_ca_en50221.c:41:
In function "copy_from_user", inlined from "dvb_ca_en50221_io_write" at drivers/media/dvb/dvb-core/dvb_ca_en50221.c:1314:26: arch/x86/include/asm/uaccess_32.h:211:26: error: call to "copy_from_user_overflow" declared with attribute error: copy_from_user() buffer size is not provably correct
Reported-by: Toralf Foerster <toralf.foerster@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This code is wrong as I should have coded it as SYS_DVBC, instead of
SYS_DVBS & friends. Anyway, this check has other problems
1) it does some "magic" by assuming that all QAM modulations are below
QAM_AUTO;
2) it checks modulation parameters only for one delivery system.
Or the core should check invalid parameters for all delivery
systems, or it should let the frontend drivers do it;
3) frontend drivers should already be checking for invalid parameters
(most of them do it, anyway);
4) not all modulations are mapped at fe->ops.info.caps, so it is not
even possible to check for the valid modulations inside the core
for some delivery systems;
5) The core check is incomplete anyway: it only checks for a few
parameters. If moved into the core other parameters like bandwidth
and fec should also be checked;
6) 2nd gen DVB-C uses OFDM. So, that test would fail for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
dvb_net_init unconditionally returns 0. Callers such as
videobuf_dvb_register_frontend examine dvbnet->dvbdev instead of the
return value to tell whether the operation succeeded. If it has been
set to a valid pointer, success; if it was left equal to NULL,
failure.
Alas, there is an edge case where that logic does not work as well:
when network support has been compiled out (CONFIG_DVB_NET=n), we want
dvb_net_init and related operations to behave as no-ops and always
succeed, but there is no appropriate value to which to set dvb->dvbdev
to indicate this.
Let dvb_net_init return a meaningful error code, as preparation for
adapting callers to look at that instead.
The only immediate impact of this patch should be to make the few
callers that already check for an error code from dvb_net_init behave
a little more sensibly when it fails.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
While this patch change some things, the updated fields there are
used just on printk, so it shouldn't cause any functional changes.
Yet, this routine is a little complex, so explain a little more
how it works.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Instead of changing the ops.info.type struct, updates only
the data that will be returned to userspace.
Also add some debug messages to help tracking such issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
without it, the loop will run forever!
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This var were used during DVBv3 times, in order to keep a copy
of the parameters used by the events. This is not needed anymore,
as the parameters are now dynamically generated from the DVBv5
structure.
So, just get rid of it. That means that a DVBv5 pure call won't
use anymore any DVBv3 parameters.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
using -1 for ISDB-T parameters do the wrong thing. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
For frontends with ISDB-T, DVB-T2, CMDBTH, etc, some code is
needed, in order to provide emulation. Add such code, and check
if the desired delivery system is supported by the frontend.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Get rid of using ops->info.type defined on DVB drivers,
as it doesn't apply anymore.
Currently, one driver (cxd2820) supports more than one different
info.type, as it can be used for DVB-T/T2 and DVB-C. There are more
drivers like that to come. So, the same frontend will have
different DVBv3 types, depending on the current delivery system.
This breaks the existing logic at dvb_frontend, that assumes that
just one delivery system DVBv3 type is supported by all delsys.
In order to easy the DVBv3->DVBv5 conversion, an ancillary function
that maps DVBv3 delivery systems into DVBv5 were added.
Also, on all places, except for the event logic, the DVBv5 cache
will be used to check parameters, instead of the DVBv5 copy.
This patch simplifies the cache sync logic, and warrants that the
cache will be in a clear state at DVB frontend register. This way,
ops->info.type will be filled to reflect the first delivery system,
providing backward compatibility support for it.
For example, in the cases like cxd2820, where the delivery systems
are defined as:
.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
A pure DVBv3 will be able to use both DVB-T and DVB-T2, as, at
DVB cache clear, the ops->info.type will be equal to FE_OFDM.
However, DVB-C won't be visible. A quick workaround would be to
do a DVBv5 call to set the delivery system to SYS_DVBC_ANNEX_A.
After such call, ops->info.type will be equal to FE_QAM, and a
DVBv3 application will see the frontend as a DVB-C one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This change is there in order to prepare the code to avoid calling
dvb_frontend_ioctl_legacy() from FE_SET_PROPERTY.
A call to dvb_frontend_ioctl_legacy() would require to update the
DVBv3 cache without need, mangling calls for newer delivery system
without any reason.
No functional changes here.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Due to DVB-T2, several new possible values for bandwidth were added.
As the DVBv3 struct were updated to handle them, the core needs to
handle all of them, as a DVBv3 application might try to use it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
By default, initialize the frontend current delivery system with
the first one. This warrants that a DVBv3 application will be able
to tune to it, after the removal of ops->init.type filling at
the drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
both callers of device_get_devnode() are only interested in lower 16bits
and nobody tries to return anything wider than 16bit anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Just like set_frontend, use the dvb cache properties for get_frontend.
This is more consistent, as both functions are now symetric. Also,
at the places get_frontend is called, it makes sense to update the
cache.
Most of this patch were generated by this small perl script:
while (<>) { $file .= $_; }
if ($file =~ m/\.get_frontend\s*=\s*([\d\w_]+)/) {
my $get = $1;
$file =~ s/($get)(\s*\([^\,\)]+)\,\s*struct\s+dtv_frontend_properties\s*\*\s*([_\d\w]+)\)\s*\{/\1\2)\n{\n\tstruct dtv_frontend_properties *\3 = &fe->dtv_property_cache;/g;
}
print $file;
Of course, the changes at dvb_frontend.[ch] were made by hand,
as well as the changes on a few other places, where get_frontend()
is called internally inside the driver.
On some places, get_frontend() were just a void function. Those
occurrences were removed, as the DVB core handles such cases.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
On several places inside dvb_frontend, only the DVBv3 parameters
were updated. Change it to be sure that, on all places, the DVBv5
parameters will be changed instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Before this patch, a query for the delivery systems were
returned SYS_UNDEFINED.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Now that all frontends are implementing DVBv5, don't export the
DVBv3 specific stuff to the drivers. Only the core should be
aware of that, as it will keep providing DVBv3 backward compatibility.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This callback is not used anywhere. Maybe it were used in the
past to optimize the custom algo, but, as it is not used anymore,
let's just remove it.
If later needed, some patch may re-add it with a proper
implementation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
