summaryrefslogtreecommitdiff
path: root/drivers/irqchip/irq-gic-v3.c
AgeCommit message (Collapse)Author
2021-06-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "This covers all architectures (except MIPS) so I don't expect any other feature pull requests this merge window. ARM: - Add MTE support in guests, complete with tag save/restore interface - Reduce the impact of CMOs by moving them in the page-table code - Allow device block mappings at stage-2 - Reduce the footprint of the vmemmap in protected mode - Support the vGIC on dumb systems such as the Apple M1 - Add selftest infrastructure to support multiple configuration and apply that to PMU/non-PMU setups - Add selftests for the debug architecture - The usual crop of PMU fixes PPC: - Support for the H_RPT_INVALIDATE hypercall - Conversion of Book3S entry/exit to C - Bug fixes S390: - new HW facilities for guests - make inline assembly more robust with KASAN and co x86: - Allow userspace to handle emulation errors (unknown instructions) - Lazy allocation of the rmap (host physical -> guest physical address) - Support for virtualizing TSC scaling on VMX machines - Optimizations to avoid shattering huge pages at the beginning of live migration - Support for initializing the PDPTRs without loading them from memory - Many TLB flushing cleanups - Refuse to load if two-stage paging is available but NX is not (this has been a requirement in practice for over a year) - A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from CR0/CR4/EFER, using the MMU mode everywhere once it is computed from the CPU registers - Use PM notifier to notify the guest about host suspend or hibernate - Support for passing arguments to Hyper-V hypercalls using XMM registers - Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap on AMD processors - Hide Hyper-V hypercalls that are not included in the guest CPUID - Fixes for live migration of virtual machines that use the Hyper-V "enlightened VMCS" optimization of nested virtualization - Bugfixes (not many) Generic: - Support for retrieving statistics without debugfs - Cleanups for the KVM selftests API" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (314 commits) KVM: x86: rename apic_access_page_done to apic_access_memslot_enabled kvm: x86: disable the narrow guest module parameter on unload selftests: kvm: Allows userspace to handle emulation errors. kvm: x86: Allow userspace to handle emulation errors KVM: x86/mmu: Let guest use GBPAGES if supported in hardware and TDP is on KVM: x86/mmu: Get CR4.SMEP from MMU, not vCPU, in shadow page fault KVM: x86/mmu: Get CR0.WP from MMU, not vCPU, in shadow page fault KVM: x86/mmu: Drop redundant rsvd bits reset for nested NPT KVM: x86/mmu: Optimize and clean up so called "last nonleaf level" logic KVM: x86: Enhance comments for MMU roles and nested transition trickiness KVM: x86/mmu: WARN on any reserved SPTE value when making a valid SPTE KVM: x86/mmu: Add helpers to do full reserved SPTE checks w/ generic MMU KVM: x86/mmu: Use MMU's role to determine PTTYPE KVM: x86/mmu: Collapse 32-bit PAE and 64-bit statements for helpers KVM: x86/mmu: Add a helper to calculate root from role_regs KVM: x86/mmu: Add helper to update paging metadata KVM: x86/mmu: Don't update nested guest's paging bitmasks if CR0.PG=0 KVM: x86/mmu: Consolidate reset_rsvds_bits_mask() calls KVM: x86/mmu: Use MMU role_regs to get LA57, and drop vCPU LA57 helper KVM: x86/mmu: Get nested MMU's root level from the MMU's role ...
2021-06-10irqchip/gic-v3: Workaround inconsistent PMR setting on NMI entryMarc Zyngier
The arm64 entry code suffers from an annoying issue on taking a NMI, as it sets PMR to a value that actually allows IRQs to be acknowledged. This is done for consistency with other parts of the code, and is in the process of being fixed. This shouldn't be a problem, as we are not enabling interrupts whilst in NMI context. However, in the infortunate scenario that we took a spurious NMI (retired before the read of IAR) *and* that there is an IRQ pending at the same time, we'll ack the IRQ in NMI context. Too bad. In order to avoid deadlocks while running something like perf, teach the GICv3 driver about this situation: if we were in a context where no interrupt should have fired, transiently set PMR to a value that only allows NMIs before acking the pending interrupt, and restore the original value after that. This papers over the core issue for the time being, and makes NMIs great again. Sort of. Fixes: 4d6a38da8e79e94c ("arm64: entry: always set GIC_PRIO_PSR_I_SET during entry") Co-developed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/lkml/20210610145731.1350460-1-maz@kernel.org
2021-06-01irqchip/gic: Split vGIC probing information from the GIC codeMarc Zyngier
The vGIC advertising code is unsurprisingly very much tied to the GIC implementations. However, we are about to extend the support to lesser implementations. Let's dissociate the vgic registration from the GIC code and move it into KVM, where it makes a bit more sense. This also allows us to mark the gic_kvm_info structures as __initdata. Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-24Merge tag 'irqchip-5.13' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip and irqdomain updates from Marc Zyngier: New HW support: - New driver for the Nuvoton WPCM450 interrupt controller - New driver for the IDT 79rc3243x interrupt controller - Add support for interrupt trigger configuration to the MStar irqchip - Add more external interrupt support to the STM32 irqchip - Add new compatible strings for QCOM SC7280 to the qcom-pdc binding Fixes and cleanups: - Drop irq_create_strict_mappings() and irq_create_identity_mapping() from the irqdomain API, with cleanups in a couple of drivers - Fix nested NMI issue with spurious interrupts on GICv3 - Don't allow GICv4.1 vSGIs when the CPU doesn't support them - Various cleanups and minor fixes Link: https://lore.kernel.org/r/20210424094640.1731920-1-maz@kernel.org
2021-04-23irqchip/gic-v3: Do not enable irqs when handling spurious interrupsHe Ying
We triggered the following error while running our 4.19 kernel with the pseudo-NMI patches backported to it: [ 14.816231] ------------[ cut here ]------------ [ 14.816231] kernel BUG at irq.c:99! [ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP [ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____)) [ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14 [ 14.816233] Hardware name: evb (DT) [ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 14.816234] pc : asm_nmi_enter+0x94/0x98 [ 14.816235] lr : asm_nmi_enter+0x18/0x98 [ 14.816235] sp : ffff000008003c50 [ 14.816235] pmr_save: 00000070 [ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0 [ 14.816238] x27: 0000000000000000 x26: ffff000008004000 [ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000 [ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc [ 14.816241] x21: ffff000008003da0 x20: 0000000000000060 [ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff [ 14.816243] x17: 0000000000000008 x16: 003d090000000000 [ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40 [ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000 [ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5 [ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f [ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e [ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000 [ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000 [ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0 [ 14.816251] Call trace: [ 14.816251] asm_nmi_enter+0x94/0x98 [ 14.816251] el1_irq+0x8c/0x180 (IRQ C) [ 14.816252] gic_handle_irq+0xbc/0x2e4 [ 14.816252] el1_irq+0xcc/0x180 (IRQ B) [ 14.816253] arch_timer_handler_virt+0x38/0x58 [ 14.816253] handle_percpu_devid_irq+0x90/0x240 [ 14.816253] generic_handle_irq+0x34/0x50 [ 14.816254] __handle_domain_irq+0x68/0xc0 [ 14.816254] gic_handle_irq+0xf8/0x2e4 [ 14.816255] el1_irq+0xcc/0x180 (IRQ A) [ 14.816255] arch_cpu_idle+0x34/0x1c8 [ 14.816255] default_idle_call+0x24/0x44 [ 14.816256] do_idle+0x1d0/0x2c8 [ 14.816256] cpu_startup_entry+0x28/0x30 [ 14.816256] rest_init+0xb8/0xc8 [ 14.816257] start_kernel+0x4c8/0x4f4 [ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000) [ 14.816258] Modules linked in: start_dp(O) smeth(O) [ 15.103092] ---[ end trace 701753956cb14aa8 ]--- [ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt [ 15.103099] SMP: stopping secondary CPUs [ 15.103100] Kernel Offset: disabled [ 15.103100] CPU features: 0x36,a2400218 [ 15.103100] Memory Limit: none which is cause by a 'BUG_ON(in_nmi())' in nmi_enter(). From the call trace, we can find three interrupts (noted A, B, C above): interrupt (A) is preempted by (B), which is further interrupted by (C). Subsequent investigations show that (B) results in nmi_enter() being called, but that it actually is a spurious interrupt. Furthermore, interrupts are reenabled in the context of (B), and (C) fires with NMI priority. We end-up with a nested NMI situation, something we definitely do not want to (and cannot) handle. The bug here is that spurious interrupts should never result in any state change, and we should just return to the interrupted context. Moving the handling of spurious interrupts as early as possible in the GICv3 handler fixes this issue. Fixes: 3f1f3234bc2d ("irqchip/gic-v3: Switch to PMR masking before calling IRQ handler") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: He Ying <heying24@huawei.com> [maz: rewrote commit message, corrected Fixes: tag] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210423083516.170111-1-heying24@huawei.com Cc: stable@vger.kernel.org
2021-03-22irq: Fix typos in commentsIngo Molnar
Fix ~36 single-word typos in the IRQ, irqchip and irqdomain code comments. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-01-21irqchip/gic-v3: Fix typos in PMR/RPR SCR_EL3.FIQ handling explanationLorenzo Pieralisi
The GICv3 driver explanation related to PMR/RPR and SCR_EL3.FIQ secure/non-secure priority handling contains a couple of typos. Fix them. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210121182252.29320-1-lorenzo.pieralisi@arm.com
2020-12-11irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()Valentin Schneider
handle_percpu_devid_fasteoi_ipi() states: * The biggest difference with the IRQ version is that the interrupt is * EOIed early, as the IPI could result in a context switch, and we need to * make sure the IPI can fire again All that can actually happen scheduler-wise within the handling of an IPI is the raising of TIF_NEED_RESCHED (and / or folding thereof into preempt_count); see scheduler_ipi() or sched_ttwu_pending() for instance. Said flag / preempt_count is evaluated some time later before returning to whatever context was interrupted, and this gates a call to preempt_schedule_irq() (arm64_preempt_schedule_irq() in arm64). Per the above, SGI's do not need a different handler than PPI's, so make them use the same (handle_percpu_devid_irq). Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201109094121.29975-2-valentin.schneider@arm.com
2020-09-17Merge remote-tracking branch 'origin/irq/gic-retrigger' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/ipi-as-irq' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic-v3: Configure SGIs as standard interruptsMarc Zyngier
Change the way we deal with GICv3 SGIs by turning them into proper IRQs, and calling into the arch code to register the interrupt range instead of a callback. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-13irqchip/gic-v3: Support pseudo-NMIs when SCR_EL3.FIQ == 0Alexandru Elisei
The GIC's internal view of the priority mask register and the assigned interrupt priorities are based on whether GIC security is enabled and whether firmware routes Group 0 interrupts to EL3. At the moment, we support priority masking when ICC_PMR_EL1 and interrupt priorities are either both modified by the GIC, or both left unchanged. Trusted Firmware-A's default interrupt routing model allows Group 0 interrupts to be delivered to the non-secure world (SCR_EL3.FIQ == 0). Unfortunately, this is precisely the case that the GIC driver doesn't support: ICC_PMR_EL1 remains unchanged, but the GIC's view of interrupt priorities is different from the software programmed values. Support pseudo-NMIs when SCR_EL3.FIQ == 0 by using a different value to mask regular interrupts. All the other values remain the same. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200912153707.667731-3-alexandru.elisei@arm.com
2020-09-13irqchip/gic-v3: Spell out when pseudo-NMIs are enabledAlexandru Elisei
When NMIs cannot be enabled, the driver prints a message stating that unambiguously. When they are enabled, the only feedback we get is a message regarding the use of synchronization for ICC_PMR_EL1 writes, which is not as useful for a user who is not intimately familiar with how NMIs are implemented. Let's make it obvious that pseudo-NMIs are enabled. Keep the message about using a barrier for ICC_PMR_EL1 writes, because it has a non-negligible impact on performance. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200912153707.667731-2-alexandru.elisei@arm.com
2020-09-13irqchip/gic-v3: Describe the SGI rangeMarc Zyngier
As we are about to start making use of SGIs in a more conventional way, let's describe it is the GICv3 list of interrupt types. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-06irqchip/gic-v2, v3: Prevent SW resends entirelyValentin Schneider
The GIC irqchips can now use a HW resend when a retrigger is invoked by check_irq_resend(). However, should the HW resend fail, check_irq_resend() will still attempt to trigger a SW resend, which is still a bad idea for the GICs. Prevent this from happening by setting IRQD_HANDLE_ENFORCE_IRQCTX on all GIC IRQs. Technically per-cpu IRQs do not need this, as their flow handlers never set IRQS_PENDING, but this aligns all IRQs wrt context enforcement: this also forces all GIC IRQ handling to happen in IRQ context (as defined by in_irq()). Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200730170321.31228-3-valentin.schneider@arm.com
2020-09-06irqchip/gic-v2, v3: Implement irq_chip->irq_retrigger()Valentin Schneider
While digging around IRQCHIP_EOI_IF_HANDLED and irq/resend.c, it has come to my attention that the IRQ resend situation seems a bit precarious for the GIC(s). When marking an IRQ with IRQS_PENDING, handle_fasteoi_irq() will bail out and issue an irq_eoi(). Should the IRQ in question be re-enabled, check_irq_resend() will trigger a SW resend, which will go through the flow handler again and issue *another* irq_eoi() on the *same* IRQ activation. This is something the GIC spec clearly describes as a bad idea: any EOI must match a previous ACK. Implement irq_chip.irq_retrigger() for the GIC chips by setting the GIC pending bit of the relevant IRQ. After being called by check_irq_resend(), this will eventually trigger a *new* interrupt which we will handle as usual. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200730170321.31228-2-valentin.schneider@arm.com
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-27drivers/irqchip: Use new macro ACPI_DECLARE_SUBTABLE_PROBE_ENTRYOscar Carter
In an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds, there are the need to remove all the function callback casts. To do this, modify the IRQCHIP_ACPI_DECLARE macro to use the new defined macro ACPI_DECLARE_SUBTABLE_PROBE_ENTRY instead of the macro ACPI_DECLARE_PROBE_ENTRY. This is necessary to be able to initialize the the acpi_probe_entry struct using the probe_subtbl field instead of the probe_table field and avoid function cast mismatches. Also, modify the prototype of the functions used by the invocation of the IRQCHIP_ACPI_DECLARE macro to match all the parameters. Co-developed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200530143430.5203-3-oscar.carter@gmx.com
2020-05-25irqchip/gic-v2, v3: Drop extra IRQ_NOAUTOEN setting for (E)PPIsValentin Schneider
(E)PPIs are per-CPU interrupts, so we want each CPU to go and enable them via enable_percpu_irq(); this also means we want IRQ_NOAUTOEN for them as the autoenable would lead to calling irq_enable() instead of the more appropriate irq_percpu_enable(). Calling irq_set_percpu_devid() is enough to get just that since it trickles down to irq_set_percpu_devid_flags(), which gives us IRQ_NOAUTOEN (and a few others). Setting IRQ_NOAUTOEN *again* right after this call is just redundant, so don't do it. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200521223500.834-1-valentin.schneider@arm.com
2020-05-18irqchip/gic-v3: Fix missing "__init" for gic_smp_init()Ingo Rohloff
With an SMP configuration, gic_smp_init() calls set_smp_cross_call(). set_smp_cross_call() is marked with "__init". So gic_smp_init() should also be marked with "__init". gic_smp_init() is only called from gic_init_bases(). gic_init_bases() is also marked with "__init"; So marking gic_smp_init() with "__init" is fine. Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200422112857.4300-1-ingo.rohloff@lauterbach.com
2020-04-16irqchip/gic-v4.1: Add support for VPENDBASER's Dirty+Valid signalingMarc Zyngier
When a vPE is made resident, the GIC starts parsing the virtual pending table to deliver pending interrupts. This takes place asynchronously, and can at times take a long while. Long enough that the vcpu enters the guest and hits WFI before any interrupt has been signaled yet. The vcpu then exits, blocks, and now gets a doorbell. Rince, repeat. In order to avoid the above, a (optional on GICv4, mandatory on v4.1) feature allows the GIC to feedback to the hypervisor whether it is done parsing the VPT by clearing the GICR_VPENDBASER.Dirty bit. The hypervisor can then wait until the GIC is ready before actually running the vPE. Plug the detection code as well as polling on vPE schedule. While at it, tidy-up the kernel message that displays the GICv4 optional features. Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-03-30Merge tag 'irq-core-2020-03-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Treewide: - Cleanup of setup_irq() which is not longer required because the memory allocator is available early. Most cleanup changes come through the various maintainer trees, so the final removal of setup_irq() is postponed towards the end of the merge window. Core: - Protection against unsafe invocation of interrupt handlers and unsafe interrupt injection including a fixup of the offending PCI/AER error injection mechanism. Invoking interrupt handlers from arbitrary contexts, i.e. outside of an actual interrupt, can cause inconsistent state on the fragile x86 interrupt affinity changing hardware trainwreck. Drivers: - Second wave of support for the new ARM GICv4.1 - Multi-instance support for Xilinx and PLIC interrupt controllers - CPU-Hotplug support for PLIC - The obligatory new driver for X1000 TCU - Enhancements, cleanups and fixes all over the place" * tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) unicore32: Replace setup_irq() by request_irq() sh: Replace setup_irq() by request_irq() hexagon: Replace setup_irq() by request_irq() c6x: Replace setup_irq() by request_irq() alpha: Replace setup_irq() by request_irq() irqchip/gic-v4.1: Eagerly vmap vPEs irqchip/gic-v4.1: Add VSGI property setup irqchip/gic-v4.1: Add VSGI allocation/teardown irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks irqchip/gic-v4.1: Add initial SGI configuration irqchip/gic-v4.1: Plumb skeletal VSGI irqchip irqchip/stm32: Retrigger both in eoi and unmask callbacks irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain irqchip/xilinx: Do not call irq_set_default_host() irqchip/xilinx: Enable generic irq multi handler irqchip/xilinx: Fill error code when irq domain registration fails irqchip/xilinx: Add support for multiple instances ...
2020-03-24Merge branch 'irq/gic-v4.1' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-03-22irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL ↵luanshi
domain irq_domain_update_bus_token should be called after checking for NULL domain. Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1583983255-44115-1-git-send-email-zhangliguang@linux.alibaba.com
2020-03-20irqchip/gic-v4.1: Advertise support v4.1 to KVMMarc Zyngier
Tell KVM that we support v4.1. Nothing uses this information so far. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20200304203330.4967-7-maz@kernel.org
2020-03-20irqchip/gic-v4.1: Ensure mutual exclusion betwen invalidations on the same RDMarc Zyngier
The GICv4.1 spec says that it is CONTRAINED UNPREDICTABLE to write to any of the GICR_INV{LPI,ALL}R registers if GICR_SYNCR.Busy == 1. To deal with it, we must ensure that only a single invalidation can happen at a time for a given redistributor. Add a per-RD lock to that effect and take it around the invalidation/syncr-read to deal with this. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20200304203330.4967-6-maz@kernel.org
2020-03-19irqchip/gic-v3: Use SGIs without active state if offeredMarc Zyngier
To allow the direct injection of SGIs into a guest, the GICv4.1 architecture has to sacrifice the Active state so that SGIs look a lot like LPIs (they are injected by the same mechanism). In order not to break existing software, the architecture gives offers guests OSs the choice: SGIs with or without an active state. It is the hypervisors duty to honor the guest's choice. For this, the architecture offers a discovery bit indicating whether the GIC supports GICv4.1 SGIs (GICD_TYPER2.nASSGIcap), and another bit indicating whether the guest wants Active-less SGIs or not (controlled by GICD_CTLR.nASSGIreq). A hypervisor not supporting GICv4.1 SGIs would leave nASSGIcap clear, and a guest not knowing about GICv4.1 SGIs (or definitely wanting an Active state) would leave nASSGIreq clear (both being thankfully backward compatible with older revisions of the GIC). Since Linux is perfectly happy without an active state on SGIs, inform the hypervisor that we'll use that if offered. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20200304203330.4967-2-maz@kernel.org
2020-03-14irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2Marc Zyngier
Despite the architecture spec requiring that reserved registers in the GIC distributor memory map are RES0 (and thus are not allowed to generate an exception), the Cavium ThunderX (aka TX1) SoC explodes as such: [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 128 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Internal error: synchronous external abort: 96000210 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc4-00035-g3cf6a3d5725f #7956 [ 0.000000] Hardware name: cavium,thunder-88xx (DT) [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 0.000000] pc : __raw_readl+0x0/0x8 [ 0.000000] lr : gic_init_bases+0x110/0x560 [ 0.000000] sp : ffff800011243d90 [ 0.000000] x29: ffff800011243d90 x28: 0000000000000000 [ 0.000000] x27: 0000000000000018 x26: 0000000000000002 [ 0.000000] x25: ffff8000116f0000 x24: ffff000fbe6a2c80 [ 0.000000] x23: 0000000000000000 x22: ffff010fdc322b68 [ 0.000000] x21: ffff800010a7a208 x20: 00000000009b0404 [ 0.000000] x19: ffff80001124dad0 x18: 0000000000000010 [ 0.000000] x17: 000000004d8d492b x16: 00000000f67eb9af [ 0.000000] x15: ffffffffffffffff x14: ffff800011249908 [ 0.000000] x13: ffff800091243ae7 x12: ffff800011243af4 [ 0.000000] x11: ffff80001126e000 x10: ffff800011243a70 [ 0.000000] x9 : 00000000ffffffd0 x8 : ffff80001069c828 [ 0.000000] x7 : 0000000000000059 x6 : ffff8000113fb4d1 [ 0.000000] x5 : 0000000000000001 x4 : 0000000000000000 [ 0.000000] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.000000] x1 : 0000000000000000 x0 : ffff8000116f000c [ 0.000000] Call trace: [ 0.000000] __raw_readl+0x0/0x8 [ 0.000000] gic_of_init+0x188/0x224 [ 0.000000] of_irq_init+0x200/0x3cc [ 0.000000] irqchip_init+0x1c/0x40 [ 0.000000] init_IRQ+0x160/0x1d0 [ 0.000000] start_kernel+0x2ec/0x4b8 [ 0.000000] Code: a8c47bfd d65f03c0 d538d080 d65f03c0 (b9400000) when reading the GICv4.1 GICD_TYPER2 register, which is unexpected... Work around it by adding a new quirk for the following variants: ThunderX: CN88xx OCTEON TX: CN83xx, CN81xx OCTEON TX2: CN93xx, CN96xx, CN98xx, CNF95xx* and use this flag to avoid accessing GICD_TYPER2. Note that all reserved registers (including redistributors and ITS) are impacted by this erratum, but that only GICD_TYPER2 has to be worked around so far. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Robert Richter <rrichter@marvell.com> Tested-by: Mark Salter <msalter@redhat.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Robert Richter <rrichter@marvell.com> Link: https://lore.kernel.org/r/20191027144234.8395-11-maz@kernel.org Link: https://lore.kernel.org/r/20200311115649.26060-1-maz@kernel.org
2020-01-28irqchip/gic-v3: Only provision redistributors that are enabled in ACPIMarc Zyngier
We currently allocate redistributor region structures for individual redistributors when ACPI doesn't present us with compact MMIO regions covering multiple redistributors. It turns out that we allocate these structures even when the redistributor is flagged as disabled by ACPI. It works fine until someone actually tries to tarse one of these structures, and access the corresponding MMIO region. Instead, track the number of enabled redistributors, and only allocate what is required. This makes sure that there is no invalid data to misuse. Signed-off-by: Marc Zyngier <maz@kernel.org> Reported-by: Heyi Guo <guoheyi@huawei.com> Tested-by: Heyi Guo <guoheyi@huawei.com> Link: https://lore.kernel.org/r/20191216062745.63397-1-guoheyi@huawei.com
2020-01-22irqchip/gic-v3: Add GICv4.1 VPEID size discoveryMarc Zyngier
While GICv4.0 mandates 16 bit worth of VPEIDs, GICv4.1 allows smaller implementations to be built. Add the required glue to dynamically compute the limit. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-3-maz@kernel.org
2020-01-22irqchip/gic-v3: Detect GICv4.1 supporting RVPEIDMarc Zyngier
GICv4.1 supports the RVPEID ("Residency per vPE ID"), which allows for a much efficient way of making virtual CPUs resident (to allow direct injection of interrupts). The functionnality needs to be discovered on each and every redistributor in the system, and disabled if the settings are inconsistent. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-2-maz@kernel.org
2019-12-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Ingo Molnar: "Most of the IRQ subsystem changes in this cycle were irq-chip driver updates: - Qualcomm PDC wakeup interrupt support - Layerscape external IRQ support - Broadcom bcm7038 PM and wakeup support - Ingenic driver cleanup and modernization - GICv3 ITS preparation for GICv4.1 updates - GICv4 fixes There's also the series from Frederic Weisbecker that fixes memory ordering bugs for the irq-work logic, whose primary fix is to turn work->irq_work.flags into an atomic variable and then convert the complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a much simpler atomic_fetch_or() call. There are also various smaller cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs pinctrl/msm: Setup GPIO chip in hierarchy irqchip/qcom-pdc: Add irqchip set/get state calls irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask irqchip/qcom-pdc: Update max PDC interrupts of/irq: Document properties for wakeup interrupt parent genirq: Introduce irq_chip_get/set_parent_state calls irqdomain: Add bus token DOMAIN_BUS_WAKEUP genirq: Fix function documentation of __irq_alloc_descs() irq_work: Fix IRQ_WORK_BUSY bit clearing irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) irq_work: Slightly simplify IRQ_WORK_PENDING clearing irq_work: Fix irq_work_claim() memory ordering irq_work: Convert flags to atomic_t irqchip: Ingenic: Add process for more than one irq at the same time. irqchip: ingenic: Alloc generic chips from IRQ domain irqchip: ingenic: Get virq number from IRQ domain irqchip: ingenic: Error out if IRQ domain creation failed irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions ...
2019-11-25Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Apart from the arm64-specific bits (core arch and perf, new arm64 selftests), it touches the generic cow_user_page() (reviewed by Kirill) together with a macro for x86 to preserve the existing behaviour on this architecture. Summary: - On ARMv8 CPUs without hardware updates of the access flag, avoid failing cow_user_page() on PFN mappings if the pte is old. The patches introduce an arch_faults_on_old_pte() macro, defined as false on x86. When true, cow_user_page() makes the pte young before attempting __copy_from_user_inatomic(). - Covert the synchronous exception handling paths in arch/arm64/kernel/entry.S to C. - FTRACE_WITH_REGS support for arm64. - ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4 - Several kselftest cases specific to arm64, together with a MAINTAINERS update for these files (moved to the ARM64 PORT entry). - Workaround for a Neoverse-N1 erratum where the CPU may fetch stale instructions under certain conditions. - Workaround for Cortex-A57 and A72 errata where the CPU may speculatively execute an AT instruction and associate a VMID with the wrong guest page tables (corrupting the TLB). - Perf updates for arm64: additional PMU topologies on HiSilicon platforms, support for CCN-512 interconnect, AXI ID filtering in the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2. - GICv3 optimisation to avoid a heavy barrier when accessing the ICC_PMR_EL1 register. - ELF HWCAP documentation updates and clean-up. - SMC calling convention conduit code clean-up. - KASLR diagnostics printed during boot - NVIDIA Carmel CPU added to the KPTI whitelist - Some arm64 mm clean-ups: use generic free_initrd_mem(), remove stale macro, simplify calculation in __create_pgd_mapping(), typos. - Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for endinanness to help with allmodconfig" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits) arm64: Kconfig: add a choice for endianness kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous" arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry arm64: kaslr: Check command line before looking for a seed arm64: kaslr: Announce KASLR status on boot kselftest: arm64: fake_sigreturn_misaligned_sp kselftest: arm64: fake_sigreturn_bad_size kselftest: arm64: fake_sigreturn_duplicated_fpsimd kselftest: arm64: fake_sigreturn_missing_fpsimd kselftest: arm64: fake_sigreturn_bad_size_for_magic0 kselftest: arm64: fake_sigreturn_bad_magic kselftest: arm64: add helper get_current_context kselftest: arm64: extend test_init functionalities kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht] kselftest: arm64: mangle_pstate_invalid_daif_bits kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils kselftest: arm64: extend toplevel skeleton Makefile drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform arm64: mm: reserve CMA and crashkernel in ZONE_DMA32 ...
2019-11-10irqchip: Remove redundant semicolon after whileDaode Huang
check drivers/irqchip with "make coccicheck M=drivers/irqchip/", it will report unneeded semicolon like below, just remove them. drivers/irqchip/irq-zevio.c:54:2-3: Unneeded semicolon drivers/irqchip/irq-gic-v3.c:177:2-3: Unneeded semicolon drivers/irqchip/irq-gic-v3.c:234:2-3: Unneeded semicolon Signed-off-by: Daode Huang <huangdaode@hisilicon.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1571300729-38822-1-git-send-email-huangdaode@hisilicon.com
2019-10-15arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clearMarc Zyngier
The GICv3 architecture specification is incredibly misleading when it comes to PMR and the requirement for a DSB. It turns out that this DSB is only required if the CPU interface sends an Upstream Control message to the redistributor in order to update the RD's view of PMR. This message is only sent when ICC_CTLR_EL1.PMHE is set, which isn't the case in Linux. It can still be set from EL3, so some special care is required. But the upshot is that in the (hopefuly large) majority of the cases, we can drop the DSB altogether. This relies on a new static key being set if the boot CPU has PMHE set. The drawback is that this static key has to be exported to modules. Cc: Will Deacon <will@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-09-18irqchip/gic-v3: Fix GIC_LINE_NR accessorZenghui Yu
As per GIC spec, ITLinesNumber indicates the maximum SPI INTID that the GIC implementation supports. And the maximum SPI INTID an implementation might support is 1019 (field value 11111). max(GICD_TYPER_SPIS(...), 1020) is not what we actually want for GIC_LINE_NR. Fix it to min(GICD_TYPER_SPIS(...), 1020). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1568789850-14080-1-git-send-email-yuzenghui@huawei.com
2019-08-20irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803Marc Zyngier
It looks like the HIP06/07 SoCs have extra bits in their GICD_TYPER registers, which confuse the GICv3.1 code (these systems appear to expose ESPIs while they actually don't). Detect these systems as early as possible and wipe the fields that should be RES0 in the register. Tested-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Warn about inconsistent implementations of extended rangesMarc Zyngier
As is it usual for the GIC, it isn't disallowed to put together a system that is majorly inconsistent, with a distributor supporting the extended ranges while some of the CPUs don't. Kindly tell the user that things are sailing isn't going to be smooth. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Add EPPI range supportMarc Zyngier
Expand the pre-existing PPI support to be able to deal with the Extended PPI range (EPPI). This includes obtaining the number of PPIs from each individual redistributor, and compute the minimum set (just in case someone builds something really clever...). Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Dynamically allocate PPI partition descriptorsMarc Zyngier
Again, PPIs are becoming a variable set. Let's hack the PPI partition code to make the top-level array dynamically allocated. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Dynamically allocate PPI NMI refcountsMarc Zyngier
As we're about to have a variable number of PPIs, let's make the allocation of the NMI refcounts dynamic. Also apply some minor cleanups (moving things around). Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic: Prepare for more than 16 PPIsMarc Zyngier
GICv3.1 allows up to 80 PPIs (16 legaci PPIs and 64 Extended PPIs), meaning we can't just leave the old 16 hardcoded everywhere. We also need to add the infrastructure to discover the number of PPIs on a per redistributor basis, although we still pretend there is only 16 of them for now. No functional change. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Add ESPI range supportMarc Zyngier
Add the required support for the ESPI range, which behave exactly like the SPIs of old, only with new funky INTIDs. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Add INTID range and convertion primitivesMarc Zyngier
In the beginning, life was simple. The GIC driver mostly cared about PPIs, SPIs and LPIs, all with nicely layed out ranges. We're about to change all that, with new ranges such as EPPI and ESPI interleaved in the middle of the no-irq-land between the "special IDs" and the LPI range. Boo. In order to make our life less hellish, let's introduce a set of primitives that will allow ranges to be identified easily and offsets to be remapped. So far, there is no functionnal change. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic: Rework gic_configure_irq to take the full ICFGR baseMarc Zyngier
gic_configure_irq is currently passed the (re)distributor address, to which it applies an a fixed offset to get to the configuration registers. This offset is constant across all GICs, or rather it was until to v3.1... An easy way out is for the individual drivers to pass the base address of the configuration register for the considered interrupt. At the same time, move part of the error handling back to the individual drivers, as things are about to change on that front. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-07irqchip/gic-v3: Register the distributor's PA instead of its VA in fwnodeMarc Zyngier
Do not expose the distributor's VA (it appears in debugfs). Instead, record the PA, which at least can be used to precisely identify the associated irqchip and domain. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-01Merge tag 'irqchip-fixes-5.3' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: A small bunch of fixes from the irqchip department: - Fix a couple of UAF on error paths (RZA1, GICv3 ITS) - Fix iMX GPCv2 trigger setting - Add missing of_node_put on error path in MBIGEN - Add another bunch of /* fall-through */ to silence warnings
2019-07-26irqchip/gic-v3: Mark expected switch fall-throughAnders Roxell
When fall-through warnings was enabled by default the following warning was starting to show up: In file included from ../arch/arm64/include/asm/cputype.h:132, from ../arch/arm64/include/asm/cache.h:8, from ../include/linux/cache.h:6, from ../include/linux/printk.h:9, from ../include/linux/kernel.h:15, from ../include/linux/list.h:9, from ../include/linux/kobject.h:19, from ../include/linux/of.h:17, from ../include/linux/irqdomain.h:35, from ../include/linux/acpi.h:13, from ../drivers/irqchip/irq-gic-v3.c:9: ../drivers/irqchip/irq-gic-v3.c: In function ‘gic_cpu_sys_reg_init’: ../arch/arm64/include/asm/sysreg.h:853:2: warning: this statement may fall through [-Wimplicit-fallthrough=] asm volatile(__msr_s(r, "%x0") : : "rZ" (__val)); \ ^~~ ../arch/arm64/include/asm/arch_gicv3.h:20:29: note: in expansion of macro ‘write_sysreg_s’ #define write_gicreg(v, r) write_sysreg_s(v, SYS_ ## r) ^~~~~~~~~~~~~~ ../drivers/irqchip/irq-gic-v3.c:773:4: note: in expansion of macro ‘write_gicreg’ write_gicreg(0, ICC_AP0R2_EL1); ^~~~~~~~~~~~ ../drivers/irqchip/irq-gic-v3.c:774:3: note: here case 6: ^~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-08Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement provides the usual mixed bag: Core: - Further improvements to the irq timings code which aims to predict the next interrupt for power state selection to achieve better latency/power balance - Add interrupt statistics to the core NMI handlers - The usual small fixes and cleanups Drivers: - Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and Amazon Gravition AMR/GIC interrupt controllers. - Rework of the Renesas INTC controller driver - ACPI support for Socionext SoCs - Enhancements to the CSKY interrupt controller - The usual small fixes and cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) irq/irqdomain: Fix comment typo genirq: Update irq stats from NMI handlers irqchip/gic-pm: Remove PM_CLK dependency irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC softirq: Use __this_cpu_write() in takeover_tasklets() irqchip/mbigen: Stop printing kernel addresses irqchip/gic: Add dependency for ARM_GIC_MAX_NR genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks() genirq/timings: Add selftest for next event computation genirq/timings: Add selftest for irqs circular buffer genirq/timings: Add selftest for circular array genirq/timings: Encapsulate storing function genirq/timings: Encapsulate timings push genirq/timings: Optimize the period detection speed genirq/timings: Fix timings buffer inspection genirq/timings: Fix next event index function irqchip/qcom: Use struct_size() in devm_kzalloc() irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler dt-bindings: interrupt-controller: Update csky mpintc ...
2019-07-08Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 19:14:17 +0000