summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2021-07-05Merge tag 'char-misc-5.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...
2021-06-28Merge tag 'fallthrough-fixes-clang-5.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo Silva: "Fix many fall-through warnings when building with Clang 12.0.0 and '-Wimplicit-fallthrough' so that we at some point will be able to enable that warning by default" * tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits) rxrpc: Fix fall-through warnings for Clang drm/nouveau/clk: Fix fall-through warnings for Clang drm/nouveau/therm: Fix fall-through warnings for Clang drm/nouveau: Fix fall-through warnings for Clang xfs: Fix fall-through warnings for Clang xfrm: Fix fall-through warnings for Clang tipc: Fix fall-through warnings for Clang sctp: Fix fall-through warnings for Clang rds: Fix fall-through warnings for Clang net/packet: Fix fall-through warnings for Clang net: netrom: Fix fall-through warnings for Clang ide: Fix fall-through warnings for Clang hwmon: (max6621) Fix fall-through warnings for Clang hwmon: (corsair-cpro) Fix fall-through warnings for Clang firewire: core: Fix fall-through warnings for Clang braille_console: Fix fall-through warnings for Clang ipv4: Fix fall-through warnings for Clang qlcnic: Fix fall-through warnings for Clang bnxt_en: Fix fall-through warnings for Clang netxen_nic: Fix fall-through warnings for Clang ...
2021-06-24hwmon: Support set_trips() of thermal device opsDmitry Osipenko
Support set_trips() callback of thermal device ops. This allows HWMON device to operatively notify thermal core about temperature changes, which is very handy to have in a case where HWMON sensor is used by CPU thermal zone that performs passive cooling and emergency shutdown on overheat. Thermal core will be able to react faster to temperature changes. The set_trips() callback is entirely optional. If HWMON sensor doesn't support setting thermal trips, then the callback is a NO-OP. The dummy callback has no effect on the thermal core. The temperature trips are either complement the temperature polling mechanism of thermal core or replace the polling if sensor can set the trips and polling is disabled by a particular device in a device-tree. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210623042231.16008-3-digetx@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-24hwmon: (lm90) Prevent integer underflows of temperature calculationsDmitry Osipenko
The min/max/crit and all other temperature values that are passed to the driver are unlimited and value that is close to INT_MIN results in integer underflow of the temperature calculations made by the driver for LM99 sensor. Temperature hysteresis is among those values that need to be limited, but limiting of hysteresis is independent from the sensor version. Add the missing limits. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210623042231.16008-2-digetx@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19hwmon: (lm90) Disable interrupt on suspendDmitry Osipenko
I2C accesses are prohibited and will error out after suspending of the I2C controller, hence we need to ensure that interrupt won't fire on suspend when it's too late. Disable interrupt across suspend/resume. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19hwmon: (lm90) Unmask hardware interruptDmitry Osipenko
The ALERT interrupt is enabled by default after power-on, but it could be masked by bootloader. For example this is the case on Acer A500 tablet device. Unmask the hardware interrupt if interrupt is provided. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19hwmon: (lm90) Use hwmon_notify_event()Dmitry Osipenko
Use hwmon_notify_event() to notify userspace and thermal core about temperature changes. Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19hwmon: (lm90) Don't override interrupt trigger typeDmitry Osipenko
The lm90 driver sets interrupt trigger type to level-low. This type is not suitable for sensors like NCT1008 that don't deassert interrupt line until temperature is back to normal, resulting in interrupt storm. The appropriate trigger type should come from OF device description and currently it's overridden by the driver's trigger type. Don't specify the trigger type in the driver code, letting interrupt core to use the device-specific trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-18hwmon: (pmbus/dps920ab) Delete some dead codeDan Carpenter
The debugfs_create_dir() function returns error pointers, it doesn't return NULL. But debugfs functions don't need to be checked in normal situations and we can just delete this code. Fixes: 1f442e213ce5 ("hwmon: (pmbus) Add driver for Delta DPS-920AB PSU") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YMyjmR54ErLtc1sH@mwanda Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (ntc_thermistor) Drop unused headers.Jonathan Cameron
The IIO usage in this driver is purely consumer so it should only be including linux/iio/consumer.h Whilst here drop pm_runtime.h as there is no runtime power management in the driver. Found using include-what-you-use and manual inspection of the suggestions. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210611142257.103094-1-jic23@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add driver for Delta DPS-920AB PSURobert Marko
This adds support for the Delta DPS-920AB PSU. Only missing feature is fan control which the PSU supports. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210607103431.2039073-1-robert.marko@sartura.hr [groeck: Add MODULE_IMPORT_NS(PMBUS);] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus/pim4328) Add PMBus driver for PIM4006, PIM4328 and PIM4820Erik Rosen
Add hardware monitoring support for Flex power interface modules PIM4006, PIM4328 and PIM4820. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Allow phase function even if it's not on pageErik Rosen
Allow the use of a phase function even if it does not exist on the associated page. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add support for reading direct mode coefficientsErik Rosen
Add support for reading and decoding direct format coefficients to the PMBus core driver. If the new flag PMBUS_USE_COEFFICIENTS_CMD is set, the driver will use the COEFFICIENTS register together with the information in the pmbus_sensor_attr structs to initialize relevant coefficients for the direct mode format. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> [groeck: Initialize ret with -EINVAL in pmbus_init_coefficients()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add new pmbus flag NO_WRITE_PROTECTErik Rosen
Some PMBus chips respond with invalid data when reading the WRITE_PROTECT register. For such chips, this flag should be set so that the PMBus core driver doesn't use the WRITE_PROTECT command to determine its behavior. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus_core) Check adapter PEC supportMadhava Reddy Siddareddygari
Currently, for Packet Error Checking (PEC) only the controller is checked for support. This causes problems on the cisco-8000 platform where a SMBUS transaction errors are observed. This is because PEC has to be enabled only if both controller and adapter support it. Added code to check PEC capability for adapter and enable it only if both controller and adapter supports PEC. Signed-off-by: Madhava Reddy Siddareddygari <msiddare@cisco.com> [Upstream from SONiC https://github.com/Azure/sonic-linux-kernel/pull/215] Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/20210605052700.541455-1-pmenzel@molgen.mpg.de [groeck: Dropped unnecessary continuation line] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (ina3221) use CVRF only for single-shot conversionNinad Malwade
As per current logic the wait time per conversion is arouns 430ms for 512 samples and around 860ms for 1024 samples for 3 channels considering 140us as the bus voltage and shunt voltage sampling conversion time. This waiting time is a lot for the continuous mode and even for the single shot mode. For continuous mode when moving average is considered the waiting for CVRF bit is not required and the data from the previous conversion is sufficuent. As mentioned in the datasheet the conversion ready bit is provided to help coordinate single-shot conversions, we can restrict the use to single-shot mode only. Also, the conversion time is for the averaged samples, the wait time for the polling can omit the number of samples consideration. Signed-off-by: Ninad Malwade <nmalwade@nvidia.com> Link: https://lore.kernel.org/r/1622789683-30931-1-git-send-email-nmalwade@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (max31790) Detect and report zero fan speedGuenter Roeck
If a fan is not running or not connected, of if fan monitoring is disabled, the fan count register returns a fixed value of 0xffe0. So far this is then translated to a RPM value larger than 0. Since this is misleading and does not really make much sense, report a fan RPM of 0 in this situation. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-7-linux@roeck-us.net
2021-06-17hwmon: (max31790) Clear fan fault after reporting itGuenter Roeck
Fault bits in MAX31790 are sticky and have to be cleared explicitly. A write operation into either the 'Target Duty Cycle' register or the 'Target Count' register is necessary to clear a fault. At the same time, we can never clear cached fault status values before reading them because the companion fault status for any given fan is cleared as well when clearing a fault. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-6-linux@roeck-us.net
2021-06-17hwmon: (max31790) Fix pwmX_enable attributesGuenter Roeck
pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-06-17hwmon: (max31790) Report correct current pwm duty cyclesGuenter Roeck
The MAX31790 has two sets of registers for pwm duty cycles, one to request a duty cycle and one to read the actual current duty cycle. Both do not have to be the same. When reporting the pwm duty cycle to the user, the actual pwm duty cycle from pwm duty cycle registers needs to be reported. When setting it, the pwm target duty cycle needs to be written. Since we don't know the actual pwm duty cycle after a target pwm duty cycle has been written, set the valid flag to false to indicate that actual pwm duty cycle should be read from the chip instead of using cached values. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@ceesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-3-linux@roeck-us.net
2021-06-17hwmon: (max31790) Fix fan speed reporting for fan7..12Guenter Roeck
Fans 7..12 do not have their own set of configuration registers. So far the code ignored that and read beyond the end of the configuration register range to get the tachometer period. This resulted in more or less random fan speed values for those fans. The datasheet is quite vague when it comes to defining the tachometer period for fans 7..12. Experiments confirm that the period is the same for both fans associated with a given set of configuration registers. Fixes: 54187ff9d766 ("hwmon: (max31790) Convert to use new hwmon registration API") Fixes: 195a4b4298a7 ("hwmon: Driver for Maxim MAX31790") Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210526154022.3223012-2-linux@roeck-us.net
2021-06-17hwmon: (sht4x) Fix sht4x_read_values return valueJoe Perches
Kernel doc for sht4x_read_values() shows 0 on success, 1 on failure but the return value on success is actually always positive as it is set to SHT4X_RESPONSE_LENGTH by a successful call to i2c_master_recv(). Miscellanea: o Update the kernel doc for sht4x_read_values to 0 for success or -ERRNO o Remove incorrectly used kernel doc /** header for other _read functions o Typo fix succesfull->successful o Reverse a test to unindent a block and use goto unlock o Declare cmd[SHT4X_CMD_LEN] rather than cmd[] At least for gcc 10.2, object size is reduced a tiny bit. $ size drivers/hwmon/sht4x.o* text data bss dec hex filename 1752 404 256 2412 96c drivers/hwmon/sht4x.o.new 1825 404 256 2485 9b5 drivers/hwmon/sht4x.o.old Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/60eedce497137eb34448c0c77e01ec9d9c972ad7.camel@perches.com Reviewed by: Navin Sankar Velliangiri <navin@linumiz.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: Add sht4x Temperature and Humidity Sensor DriverNavin Sankar Velliangiri
This patch adds a hwmon driver for the SHT4x Temperature and Humidity sensor. Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> [groeck: dropped unnecessary empty line and continuation lines] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (adm1275) enable adm1272 temperature reportingChu Lin
adm1272 supports temperature reporting but it is disabled by default. Tested: ls temp1_* temp1_crit temp1_highest temp1_max temp1_crit_alarm temp1_input temp1_max_alarm cat temp1_input 26642 Signed-off-by: Chu Lin <linchuyuan@google.com> Link: https://lore.kernel.org/r/20210512171043.2433694-1-linchuyuan@google.com [groeck: Updated subject to reflect correct driver] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add support for MPS Multi-phase mp2888 controllerVadim Pasternak
Add support for mp2888 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a digital, multi-phase, pulse-width modulation controller. This device supports: - One power rail. - Programmable Multi-Phase up to 10 Phases. - PWM-VID Interface - One pages 0 for telemetry. - Programmable pins for PMBus Address. - Built-In EEPROM to Store Custom Configurations. - Can configured VOUT readout in direct or VID format and allows setting of different formats on rails 1 and 2. For VID the following protocols are available: VR13 mode with 5-mV DAC; VR13 mode with 10-mV DAC, IMVP9 mode with 5-mV DAC. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210511055619.118104-3-vadimp@nvidia.com [groeck: Add MODULE_IMPORT_NS] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Increase maximum number of phases per pageVadim Pasternak
Increase maximum number of phases from 8 to 10 to support multi-phase devices allowing up to 10 phases. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210511055619.118104-2-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (bt1-pvt) Remove redundant error printing in pvt_request_regs()Zhen Lei
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210511091843.4561-1-thunder.leizhen@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add support for additional Flex BMR converters to pmbusErik Rosen
Add support for Flex BMR310, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491 and BMR492 to the pmbus driver Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210507194023.61138-4-erik.rosen@metormote.com [groeck: Fixed minor whitespace error] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus) Add new flag PMBUS_READ_STATUS_AFTER_FAILED_CHECKErik Rosen
Some PMBus chips end up in an undefined state when trying to read an unsupported register. For such chips, it is necessary to reset the chip pmbus controller to a known state after a failed register check. This can be done by reading a known register. By setting this flag the driver will try to read the STATUS register after each failed register check. This read may fail, but it will put the chip into a known state. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210507194023.61138-2-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (sch56xx-common) Simplify sch56xx_device_addArmin Wolf
Use platform_device_register_simple() instead of manually calling platform_device_alloc()/platform_device_add(). Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20210508131457.12780-5-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (sch56xx-common) Use helper functionArmin Wolf
Use watchdog_set_nowayout() to process param setting and change param type to bool. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20210508131457.12780-4-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (sch56xx-common) Use strscpyArmin Wolf
strlcpy is considered deprecated. Replace it with strscpy. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20210508131457.12780-3-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (sch56xx) Use devres functions for watchdogArmin Wolf
Use devm_kzalloc()/devm_watchdog_register() for watchdog registration since it allows us to remove the sch56xx_watchdog_data struct from the drivers own data structs. Remove sch56xx_watchdog_unregister since devres takes care of that now. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20210508131457.12780-2-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> [groeck: Dropped unnecessary return; at end of void function] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (lm70) Use SPI_MODE_X_MASKAndy Shevchenko
Use SPI_MODE_X_MASK instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210510141331.56736-1-andriy.shevchenko@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (max31722) Remove non-standard ACPI device IDsGuenter Roeck
Valid Maxim Integrated ACPI device IDs would start with MXIM, not with MAX1. On top of that, ACPI device IDs reflecting chip names are almost always invalid. Remove the invalid ACPI IDs. Fixes: 04e1e70afec6 ("hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (lm70) Revert "hwmon: (lm70) Add support for ACPI"Guenter Roeck
This reverts commit b58bd4c6dfe709646ed9efcbba2a70643f9bc873. None of the ACPI IDs introduced with the reverted patch is a valid ACPI device ID. Any ACPI users of this driver are advised to use PRP0001 and a devicetree-compatible device identification. Fixes: b58bd4c6dfe7 ("hwmon: (lm70) Add support for ACPI") Cc: Andrej Picej <andpicej@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (lm75) Add TI TMP1075 supportRobert Marko
TI TMP1075 is a LM75 compatible sensor, so lets add support for it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210429121150.106804-1-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus/zl6100) Add support for ZLS1003, ZLS4009 and ZL8802Erik Rosen
Add support for Renesas ZL8802 Dual Channel/Dual Phase PMBus DC/DC Digital Controller as well as ZLS1003 and ZLS4009 custom DC/DC controller chips. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210423153329.33457-2-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-17hwmon: (pmbus/bpa-rs600) Handle Vin readings >= 256VChris Packham
The BPA-RS600 doesn't follow the PMBus spec for linear data. Specifically it treats the mantissa as an unsigned 11-bit value instead of a two's complement 11-bit value. At this point it's unclear whether this only affects Vin or if Pin/Pout1 are affected as well. Erring on the side of caution only Vin is dealt with here. Fixes: 15b2703e5e02 ("hwmon: (pmbus) Add driver for BluTek BPA-RS600") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210616034218.25821-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-14Merge tag 'v5.13-rc6' into char-misc-nextGreg Kroah-Hartman
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10hwmon: (tps23861) correct shunt LSB valuesRobert Marko
Current shunt LSB values got reversed during in the original driver commit. So, correct the current shunt LSB values according to the datasheet. This caused reading slightly skewed current values. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210609220728.499879-3-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-10hwmon: (tps23861) set current shunt valueRobert Marko
TPS23861 has a configuration bit for setting of the current shunt value used on the board. Its bit 0 of the General Mask 1 register. According to the datasheet bit values are: 0 for 255 mOhm (Default) 1 for 250 mOhm So, configure the bit before registering the hwmon device according to the value passed in the DTS or default one if none is passed. This caused potentially reading slightly skewed values due to max current value being 1.02A when 250mOhm shunt is used instead of 1.0A when 255mOhm is used. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210609220728.499879-2-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-10hwmon: (tps23861) define regmap max registerRobert Marko
Define the max register address the device supports. This allows reading the whole register space via regmap debugfs, without it only register 0x0 is visible. This was forgotten in the original driver commit. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210609220728.499879-1-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-10Merge tag 'fsi-for-v5.14' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next Joel writes: FSI changes for v5.14 - Bug fixes for the OCC, SCOM and SBEFIFO drivers - Performance fix for aspeed fsi master - Small fixes from the mailing lists * tag 'fsi-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi: fsi/sbefifo: Fix reset timeout fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE fsi: master-ast-cf: Remove redundant error printing in fsi_master_acf_probe() fsi: Aspeed: Reduce poll timeout fsi: aspeed: convert to devm_platform_ioremap_resource hwmon: (occ) Print response status in first poll error message hwmon: (occ) Start sequence number at one fsi: occ: Log error for checksum failure fsi: occ: Don't accept response from un-initialized OCC fsi: scom: Remove retries fsi: scom: Reset the FSI2PIB engine for any error fsi: aspeed: Emit fewer barriers in opb operations fsi: core: Fix return of error values on failures fsi: Add missing MODULE_DEVICE_TABLE
2021-06-09hwmon: (scpi-hwmon) shows the negative temperature properlyRiwen Lu
The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Tested-by: Xin Chen <chenxin@kylinos.cn> Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-09hwmon: (corsair-psu) fix suspend behaviorWilken Gottwalt
During standby some PSUs turn off the microcontroller. A re-init is required during resume or the microcontroller stays unresponsive. Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YLjCJiVtu5zgTabI@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-04hwmon: (occ) Print response status in first poll error messageEddie James
In order to better debug problems starting up the driver, print the response status from the OCC in the error logged when the first poll command fails. Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210209171235.20624-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04hwmon: (occ) Start sequence number at oneEddie James
Initialize the sequence number at one, rather than zero, in order to prevent false matches with the zero-initialized OCC SRAM buffer before the OCC is fully initialized. Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210209171235.20624-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-02Merge tag 'hwmon-for-v5.13-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "The most notable fix is for the q54sj108a2 driver to let it actually instantiate. Also attribute fixes for pmbus/isl68137, pmbus/fsp-3y, and dell-smm-hwmon drivers" * tag 'hwmon-for-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon/pmbus: (q54sj108a2) The PMBUS_MFR_ID is actually 6 chars instead of 5 hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_3 for RAA228228 hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E VOUT hwmon: (dell-smm-hwmon) Fix index values
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 10:03:41 +0000