summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2018-09-19Merge tag 'hwmon-for-linus-v4.19-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Guenter writes: "Various bug fixes for nct6775 driver"
2018-09-17hwmon: (nct6775) Use different register to get fan RPM for fan7Guenter Roeck
The documented register to retrieve the fan RPM for fan7 is found to be unreliable at least with NCT6796D revision 3. Let's use register 0x4ce instead. This is undocumented for NCT6796D, but documented for NCT6797D and NCT6798D and known to be working. Reported-by: Robert Kern <ulteq@web.de> Cc: Robert Kern <ulteq@web.de> Fixes: 81820059a428 ("hwmon: (nct6775) Add support for NCT6796D") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-09-15hwmon: (nct6775) Fix RPM output for fan7 on NCT6796DGuenter Roeck
fan7 on NCT6796D does not have a fan count register; it only has an RPM register. Switch to using RPM registers to read the fan speed for all chips supporting it to solve the problem for good. Reported-by: Robert Kern <ulteq@web.de> Cc: Robert Kern <ulteq@web.de> Fixes: 81820059a428 ("hwmon: (nct6775) Add support for NCT6796D") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-09-15hwmon: (nct6775) Fix virtual temperature sources for NCT6796DGuenter Roeck
The following kernel log message is reported for the nct6775 driver on ASUS WS X299 SAGE. nct6775: Found NCT6796D or compatible chip at 0x2e:0x290 nct6775 nct6775.656: Invalid temperature source 11 at index 0, source register 0x100, temp register 0x73 nct6775 nct6775.656: Invalid temperature source 11 at index 2, source register 0x300, temp register 0x77 nct6775 nct6775.656: Invalid temperature source 11 at index 3, source register 0x800, temp register 0x79 nct6775 nct6775.656: Invalid temperature source 11 at index 4, source register 0x900, temp register 0x7b A recent version of the datasheet lists temperature source 11 as reserved. However, an older version of the datasheet lists temperature sources 10 and 11 as supported virtual temperature sources. Apparently the older version of the datasheet is correct, so list those temperature sources as supported. Virtual temperature sources are different than other temperature sources: Values are not read from a temperature sensor, but written either from BIOS or an embedded controller. As such, each virtual temperature has to be reported. Since there is now more than one temperature source, we have to keep virtual temperature sources in a chip-specific mask and can no longer rely on the assumption that there is only one virtual temperature source with a fixed index. This accounts for most of the complexity of this patch. Reported-by: Robert Kern <ulteq@web.de> Cc: Robert Kern <ulteq@web.de> Fixes: 81820059a428 ("hwmon: (nct6775) Add support for NCT6796D") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-09-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few more fixes who have trickled in: - MMC bus width fixup for some Allwinner platforms - Fix for NULL deref in ti-aemif when no platform data is passed in - Fix div by 0 in SCMI code - Add a missing module alias in a new RPi driver" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: memory: ti-aemif: fix a potential NULL-pointer dereference firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero hwmon: rpi: add module alias to raspberrypi-hwmon arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
2018-09-07hwmon: (nct6775) Fix access to fan pulse registersGuenter Roeck
Not all fans have a fan pulse register. This can result in reading beyond the end of REG_FAN_PULSES and FAN_PULSE_SHIFT arrays, and was reported by smatch as possible error. 1672 for (i = 0; i < ARRAY_SIZE(data->rpm); i++) { ^^^^^^^^^^^^^^^^^^^^^^^^ This is a 7 element array. ... 1685 data->fan_pulses[i] = 1686 (nct6775_read_value(data, data->REG_FAN_PULSES[i]) 1687 >> data->FAN_PULSE_SHIFT[i]) & 0x03; ^^^^^^^^^^^^^^^^^^^^^^^^ FAN_PULSE_SHIFT is either 5 or 6 elements. To fix the problem, we have to ensure that all REG_FAN_PULSES and FAN_PULSE_SHIFT have the appropriate length, and that REG_FAN_PULSES is only read if the register actually exists. Fixes: 6c009501ff200 ("hwmon: (nct6775) Add support for NCT6102D/6106D") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-09-05hwmon: (nct6775) Set weight source to zero correctlyDan Carpenter
This is dead code because j can never be 1 at this point. We had intended to just test if the bit was clear. Fixes: bbd8decd4123 ("hwmon: (nct6775) Add support for weighted fan control") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-09-05hwmon: rpi: add module alias to raspberrypi-hwmonPeter Robinson
The raspberrypi-hwmon driver doesn't automatically load, although it does work when loaded, by adding the alias it auto loads as expected when built as a module. Tested on RPi2/RPi3 on 32 bit kernel and RPi3B+ on aarch64 with Fedora 28 and a patched 4.18 RC kernel. Fixes: 3c493c885cf ("hwmon: Add support for RPi voltage sensor") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> CC: Stefan Wahren <stefan.wahren@i2se.com> CC: Eric Anholt <eric@anholt.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-08-26hwmon: (nct6775) Fix potential Spectre v1Gustavo A. R. Silva
val can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: vers/hwmon/nct6775.c:2698 store_pwm_weight_temp_sel() warn: potential spectre issue 'data->temp_src' [r] Fix this by sanitizing val before using it to index data->temp_src Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-26hwmon: (adt7475) Make adt7475_read_word() return errorsDan Carpenter
The adt7475_read_word() function was meant to return negative error codes on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-26hwmon: (adt7475) Potential error pointer dereferencesDan Carpenter
The adt7475_update_device() function returns error pointers. The problem is that in show_pwmfreq() we dereference it before the check. And then in pwm_use_point2_pwm_at_crit_show() there isn't a check at all. I don't know if it's required, but it silences a static checker warning and it's doesn't hurt anything to check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-26hwmon: (ina2xx) fix sysfs shunt resistor read accessLothar Felten
fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-08-17Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...
2018-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-08-10hwmon: (adt7475) Change show functions to return error data correctlyTokunori Ikegami
Change update device function to return an error pointer if needed, and report the error to user space. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> [groeck: Clarified/updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-10hwmon: (adt7475) Change update functions to add error handlingTokunori Ikegami
I2C SMBus sometimes returns error codes. In the error case, measurement values are updated incorrectly. The sensor application then generates warning log messages and SNMP traps. To prevent this, add error handling into the update functions. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> [groeck: Update description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-10hwmon: (adt7475) Change valid parameter to bool typeTokunori Ikegami
Currently the valid variable is of type char, but it is used as boolean. So let's change it to bool. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> [groeck: Update description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-10hwmon: (adt7475) Split device update function to measure and limitsTokunori Ikegami
The update function reads both measurement and limit values. Those parts can be split so split them for a maintainability. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> [groeck: Clarify description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-09hwmon: k10temp: Support Threadripper 2920X, 2970WX; simplify offset tableGuenter Roeck
All announced Threadripper 29xx models have a temperature offset of 27 degrees C. Simplify temperature offset table to match all 29xx Threadripper models with a single entry. Also simplify the table to match all 19xx Threadripper models with a single entry. This effectively drops entries for Threadripper 1910/1920/1950 which never saw the light of day. Cc: Michael Larabel <Michael@phoronix.com> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-07hwmon: (k10temp) 27C Offset needed for Threadripper2Michael Larabel
For at least the Threadripper 2950X and Threadripper 2990WX, it's confirmed a 27 degree offset is needed. Signed-off-by: Michael Larabel <michael@phoronix.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-31hwmon: (ibmpowernv) Add attributes to enable/disable sensor groupsShilpasri G Bhat
OPAL firmware provides the facility for some groups of sensors to be enabled/disabled at runtime to give the user the option of using the system resources for collecting these sensors or not. For example, on POWER9 systems, the On Chip Controller (OCC) gathers various system and chip level sensors and maintains their values in main memory. This patch provides support for enabling/disabling the sensor groups like power, temperature, current and voltage. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> [stewart@linux.vnet.ibm.com: Commit message] Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-23hwmon: (iio_hwmon) Use devm functionsMaxime Roussin-Bélanger
Use devm_iio_channel_get_all() to automatically release channels. Use devm_hwmon_device_register_with_groups() to automatically unregister the device. Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> [groeck: Dropped now unnecessary platform_set_drvdata() and hwmon_dev] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-18hwmon: Add support for power min, lcrit, min_alarm and lcrit_alarmAndrew Lunn
Some sensors support reporting minimal and lower critical power, as well as alarms when these thresholds are reached. Add support for these attributes to the hwmon core. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-14Merge tag 'arm-soc/for-4.19/drivers' of https://github.com/Broadcom/stblinux ↵Olof Johansson
into next/drivers This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes for 4.19, please pull the following: - Doug updates the low-level suspend/resume code for ARM SoCs to support the latest rev B3.0 memory controllers found on newer chips with an appropriate match structure to perform the correct entry sequencing - Florian updates the Device Tree binding document for these memory controllers to list all possible compatible strings that exist given the supported memory controllers. - Stefan adds the GET_THROTTLED firmware property value that is required for the Rasperry Pi voltage monitoring driver and updates the Raspberry Pi firmware driver accordingly to register such a device using the HWMON subsystem. Finally he adds support for reporting under voltage conditions using a specialized HWMON driver. * tag 'arm-soc/for-4.19/drivers' of https://github.com/Broadcom/stblinux: firmware: raspberrypi: Remove VLA usage firmware: raspberrypi: Register hwmon driver hwmon: Add support for RPi voltage sensor soc: bcm: brcmstb: Add missing DDR MEMC compatible strings soc: bcm: brcmstb: pm: Add support for newer rev B3.0 controllers ARM: bcm2835: Add GET_THROTTLED firmware property Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-09hwmon: Add support for RPi voltage sensorStefan Wahren
Currently there is no easy way to detect undervoltage conditions on a remote Raspberry Pi. This hwmon driver retrieves the state of the undervoltage sensor via mailbox interface. The handling based on Noralf's modifications to the downstream firmware driver. In case of an undervoltage condition only an entry is written to the kernel log. CC: "Noralf Trønnes" <noralf@tronnes.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08hwmon: Add NPCM7xx PWM and Fan driverTomer Maimon
Add Nuvoton BMC NPCM750/730/715/705 Pulse Width Modulation (PWM) and Fan tacho driver. The Nuvoton BMC NPCM750/730/715/705 supports 8 PWM controller outputs and 16 Fan controller inputs. The driver provides a sysfs entries through which the user can configure the duty-cycle value from 0(off) and 255(full speed) and read the fan tacho rpm value. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08hwmon: (pmbus/max34440) Add support for MAX34451.Kun Yi
MAX34451 is a 16-Channel Voltage/Current Monitor and 12-Channel Sequencer. Signed-off-by: Kun Yi <kunyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08hwmon: (mlxreg-fan) Add support for Mellanox FAN driverVadim Pasternak
Driver obtains PWM and tachometers registers location according to the system configuration and creates FAN/PWM hwmon objects and a cooling device. PWM and tachometers are controlled through the on-board programmable device, which exports its register map. This device could be attached to any bus type, for which register mapping is supported. Single instance is created with one PWM control, up to 12 tachometers and one cooling device. It could be as many instances as programmable device supports. Currently driver will be activated from the Mellanox platform driver: drivers/platform/x86/mlx-platform.c. For the future ARM based systems it could be activated from the ARM platform module. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08hwmon: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08hwmon: (nct6775) Fix comment in the description of pwm_modeGuenter Roeck
Commit 415eb2a1aaa488 ("hwmon: (nct6775) Fix writing pwmX_mode") changed the definition of the pwm_mode variable, but did not update the comment describing it. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08hwmon: (nct7904) Fix UNSPECIFIED_INT warningJakob Albert
Fix UNSPECIFIED_INT warning reported by checkpatch.pl Signed-off-by: Lorenz Kaestle <lorenz.kaestle@fau.de> Signed-off-by: Jakob Albert <jakob.j.albert@fau.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08hwmon: (nct7904) Fix CODE_INDENT errorJakob Albert
Fix CODE_INDENT error reported by checkpatch.pl Signed-off-by: Lorenz Kaestle <lorenz.kaestle@fau.de> Signed-off-by: Jakob Albert <jakob.j.albert@fau.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08hwmon: (nct7904) Fix SPACING errorsJakob Albert
Fix SPACING errors reported by checkpatch.pl Signed-off-by: Lorenz Kaestle <lorenz.kaestle@fau.de> Signed-off-by: Jakob Albert <jakob.j.albert@fau.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-16hwmon: (nct6775) Fix loop limitGuenter Roeck
Commit cc66b3038254 ("hwmon: (nct6775) Rework temperature source and label handling") changed a loop limit from "data->temp_label_num - 1" to "32", as part of moving from a string array to a bit mask. This results in the following error, reported by UBSAN. UBSAN: Undefined behaviour in drivers/hwmon/nct6775.c:4179:27 shift exponent 32 is too large for 32-bit type 'long unsigned int' Similar to the original loop, the limit has to be one less than the number of bits. Fixes: cc66b3038254 ("hwmon: (nct6775) Rework temperature source and label handling") Reported-by: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de> Cc: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de> Tested-by: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-06-16hwmon: (dell-smm) Disable fan support for Dell XPS13 9333Helge Eichelberg
Calling fan related SMM functions implemented by Dell BIOS firmware on Dell XPS13 9333 freeze kernel for about 500ms. Until Dell fixes it we need to disable fan support for Dell XPS13 9333. Via "force" module param fan support can be enabled. Link: https://bugzilla.kernel.org/show_bug.cgi?id=195751 Signed-off-by: Helge Eichelberg <kernelorg@elchenberg.name> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'powerpc-4.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Support for split PMD page table lock on 64-bit Book3S (Power8/9). - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live patching again. - Add support for patching barrier_nospec in copy_from_user() and syscall entry. - A couple of fixes for our data breakpoints on Book3S. - A series from Nick optimising TLB/mm handling with the Radix MMU. - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre. - Several series optimising various parts of the 32-bit code from Christophe Leroy. - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"), which is why the diffstat has so many deletions. And many other small improvements & fixes. There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details around pkey support. It was ack'ed/reviewed by Ingo & Dave and has been in next for several weeks. Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing" * tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits) powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap cpuidle: powernv: Fix promotion from snooze if next state disabled powerpc: fix build failure by disabling attribute-alias warning in pci_32 ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait() powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted" powerpc: fix spelling mistake: "Usupported" -> "Unsupported" powerpc/pkeys: Detach execute_only key on !PROT_EXEC powerpc/powernv: copy/paste - Mask SO bit in CR powerpc: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove support for Marvell mv64x60 i2c controller powerpc/boot: Remove support for Marvell MPSC serial controller powerpc/embedded6xx: Remove C2K board support powerpc/lib: optimise PPC32 memcmp powerpc/lib: optimise 32 bits __clear_user() powerpc/time: inline arch_vtime_task_switch() powerpc/Makefile: set -mcpu=860 flag for the 8xx powerpc: Implement csum_ipv6_magic in assembly powerpc/32: Optimise __csum_partial() powerpc/lib: Adjust .balign inside string functions for PPC32 ...
2018-06-01hwmon: (asus_atk0110) Make use of device managed memoryBastian Germann
Use devm_* variants of kstrdup and kzalloc. Get rid of kfree cleanups. Signed-off-by: Bastian Germann <bastiangermann@fishpost.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-06-01hwmon: (asus_atk0110) Replace deprecated device register callBastian Germann
Make the asus_atk0110 driver use hwmon_device_register_with_groups instead of the deprecated hwmon_device_register. Construct the expected attribute_group array from the sensor list which contains all needed attributes. Remove the manual sysfs file creation and deletion that are now taken care of by the (un)register calls via the attribute_group array. Signed-off-by: Bastian Germann <bastiangermann@fishpost.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-06-01hwmon: (k10temp) Make function get_raw_temp staticColin Ian King
The function get_raw_temp is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/hwmon/k10temp.c:149:14: warning: symbol 'get_raw_temp' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21Merge tag 'ib-mfd-hwmon-v4.18' into hwmon-nextGuenter Roeck
Immutable branch between MFD and HWMON due for the v4.18 merge window
2018-05-21hwmon: (ltc2990) support all measurement modesTom Levens
Updated version of the ltc2990 driver which supports all measurement modes (current, voltage, temperature) available in the chip. If devicetree is used, the mode must be specified with the property "lltc,meas-mode". The format and possible values of the property are described in the binding. If devicetree is not used, the mode of the chip will not be configured. Unless the chip is configured by another source, only the internal temperature and supply voltage will be measured. Signed-off-by: Tom Levens <tom.levens@cern.ch> Tested-By: mike.looijmans@topic.nl [groeck: Fixed compiler warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21hwmon: (ltc2990) Fix incorrect conversion of negative temperaturesTom Levens
Fix incorrect conversion of negative temperatures by using sign_extend32() instead of a home-grown conversion function. Fixes: df922703574e ("hwmon: Add LTC2990 sensor driver") Signed-off-by: Tom Levens <tom.levens@cern.ch> [groeck: Updated subject and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21hwmon: (core) check parent dev != NULL when chip != NULLLucas Magasweran
hwmon_device_register_with_info() registration API requires a non-NULL parent device when chip is non-NULL. This commit adds a check and documents this requirement. Signed-off-by: Lucas Magasweran <lucas.magasweran@ieee.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21hwmon: (fschmd) fix typo 'can by' to 'can be'Wolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21hwmon: (k10temp) Display both Tctl and TdieGuenter Roeck
On some AMD CPUs, there is a different between the die temperature (Tdie) and the reported temperature (Tctl). Tdie is the real measured temperature, and Tctl is used for fan control. Lets report both for affected CPUs. Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 23:42:22 +0000